Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Registratiom of TM data to digital elevation models

Several problems arise when attempting to register LANDSAT thematic mapper data to U.S. B Geological Survey digital elevation models (DEMs). The TM data are currently available only in a rotated variant of the Space Oblique Mercator (SOM) map projection. Geometric transforms are thus; required to access TM data in the geodetic coordinates used by the DEMs. Due to positional errors in the TM data, these transforms require some sort of external control. The spatial resolution of TM data exceeds that of the most commonly DEM data. Oversampling DEM data to TM resolution introduces systematic noise. Common terrain processing algorithms (e.g., close computation) compound this problem by acting as high-pass filters.

Source record↗

Final Comparison of TM and MSS Data for Surface Mine Assessment in Logan County, West Virginia

A variety of classifications during both raw and transformed MSS and TM data sets from 4 September 1982 were performed for the Logan County, West Virginia study area. The object was to compare the utility of TM and MSS data for delineating small, irregular ground features, particularly surface mines, and also to test data reduction/transformation techniques (band selection, canonical analysis, and principal components) in relation to a traditional means of unsupervised classification. Statistical results demonstrate that, on the average, the TM classifications yielded an overall .53 factor of improvement relative to the MSS classifications. When the accuracies for only three minor (in terms of areal extent) land use categories are examined, the factor of improvement for TM over MSS increases to 1.48; i.e., the TM is nearly one and one-half times better than the MSS for delineating small and irregular ground features such as contour strip mines.

Witt, R. G.↗

Preliminary Comparisons of the Information Content and Utility of TM Versus MSS Data

Some preliminary indications were provided as to the relative merits of actual TM data versus MSS data for land cover mapping related applications. Three analyses were designed which had sensitivity to the differences in spectral, spatial and radiometric parameters between the TM and MSS. In the water body analysis, a primarily spatially related test, the detectability of small uniform targets was examined. The principal components analysis, an examination of the inherent dimensionality of the data, was more spectrally and radiometrically related. The spectral clustering analysis, also heavily spectrally and radiometrically influenced, provided information on the types of targets separable on TM versus MSS data. These analyses were to be conducted with simultaneously collected LANDSAT-4 complete TM (7 band) and MSS (4 band) data. In actuality, 4-band TM data, and archived LANDSAT-2 MSS data of the same area were used.

Markham, B. L.↗

A First Evaluation of LANDSAT TM Data to Monitor Suspended Sediments in Lakes

The use of LANDSAT to monitor and track changes in the water quality of Lake Chicot, Arizona was assessed using MSS and TM digital data from nine water sites. Results show that: (1) TM Bands 1, 2, 3, and 4 appear to be providing information on concentrations of particulate matter suspended in surface waters. These bands are also highly interrelated for water samples; (2) preliminary evaluation indicates that TM Band 3 showed the best relationship to surface suspended solids; (3) TM Bands 5 and 7 are useful for separating water from nonwater areas; (4) the MSS Bands 2 and 3 can be related to suspended solids in surface water, as has already been shown from previous LANDSAT research; and (5) analysis of TM Band 6 indicates that while synoptic temperature patterns may be discerned, the digital sensitivity to a two degree temperature difference is low.

Schiebe, F. R.↗

Comparison of classification schemes for MSS and TM data

The launch of the Landsat-4 satellite in July 1982 provided the first full coverage from space of the 0.4-12 micron spectrum of the earth scene. In addition to the green, red, and near IR bands of the MSS, the TM provides a band in the blue, two in the middle IR, and one thermal IR. The paper describes spectral class analysis of coincident MSS and TM data to evaluate the contribution of the additional TM bands. In addition, various classifiers are available which were applied to the TM data. In the spectral class analysis, twice the number of separable classes was found in the TM data compared to the MSS data.

Anuta, P. E.↗

LANDSAT TM image data quality analysis for energy-related applications

This project represents a no-cost agreement between National Aeronautic Space Administration Goddard Space Flight Center (NASA GSFC) and the Pacific Northwest Laboratory (PNL). PNL is a Department of Energy (DOE) national laboratory operted by Battelle Memorial Institute at its Pacific Northwest Laboratories in Richland, Washington. The objective of this investigation is to evaluate LANDSAT's thematic mapper (TM) data quality and utility characteristics from an energy research and technological perspective. Of main interest is the extent to which repetitive TM data might support DOE efforts relating to siting, developing, and monitoring energy-related facilities, and to basic geoscientific research. The investigation utilizes existing staff and facility capabilities, and ongoing programmatic activities at PNL and other DOE national laboratories to cooperatively assess the potential usefulness of the improved experimental TM data. The investigation involves: (1) both LANDSAT 4 and 5 TM data, (2) qualitative and quantitative use consideration, and 3) NASA P (corrected) and A (uncorrected) CCT analysis for a variety of sites of DOE interest. Initial results were presented at the LANDSAT Investigator's Workshops and at specialized LANDSAT TM sessions at various conferences.

Wukelic, G. E.↗

Data space volumes and classification optimization of SPOT and Landsat TM data

In order to compare the data space volume of SPOT XS and Landsat TM images, three data sets, i.e., a wetlands/agricultural data set, an agricultural data set, and a forest data set, are examined. The comparisons are made for the same geographic area. The data space volumes for Landsat TM (2, 3, and 4) are found to be 70 to 100 percent larger than the volumes for the SPOT XS images. It is suggested that the additional midinfrared bands contribute to the difference in data space volumes between Landsat TM and SPOT XS. The data space volumes for Landsat TM bands 3, 4, and 5 are more than an order of magnitude greater than the volumes for the three band SPOT XS data sets. The volumes of the six-band Landsat TM images are four orders of magnitude greater than the SPOT XS. The analysis of the data space volumes is used to optimize the computation time and minimize the storage requirements of a maximum-likelihood classification based on a look-up table.

Ahearn, Sean C.↗

Detection of soil erosion within pinyon-juniper woodlands using Thematic Mapper (TM) data

Multispectral measurements collected by Landsat Thematic Mapper (TM) were correlated with field measurements, direct soil loss estimates, and Universal Soil Loss Equation (USLE) estimates to determine the sensitivity of TM data to varying degrees of soil erosion in pinyon-juniper woodland in central Utah. TM data were also evaluated as a predictor of the USLE Crop Management C factor for pinyon-juniper woodlands. TM spectral data were consistently better predictors of soil erosion factors than any combination of field factors. TM data were more sensitive to vegetation variations than the USLE C factor. USLE estimates showed low annual rates of erosion which varied little among the study sites. Direct measurements of rate of soil loss using the SEDIMENT (Soil Erosion DIrect measureMENT) technique, indicated high and varying rates of soil loss among the sites since tree establishment. Erosion estimates from the USLE and SEDIMENT methods suggest that erosion rates have been severe in the past, but because significant amounts of soil have already been eroded, and the surface is now armored by rock debris, present erosion rates are lower. Indicators of accelerated erosion were still present on all sites, however, suggesting that the USLE underestimated erosion within the study area.

Price, Kevin P.↗

Predicting LANDSAT MSS endmember signatures from corresponding higher resolution TM fraction images

The approach to predicting Landsat Multispectral Scanner System (MSS) endmember signatures from fraction images derived from high resolution Landsat Thematic Mapper (TM) data is presented. The purpose, conducted in the Mogi-Guacu study site located in Sao Paulo State, Brazil, was to determine if information derived from a mixture model applied to higher resolution TM data could serve as ground truth for the lower resolution MSS sensor. The Constrained Least Squares (CLS) method was used to generate vegetation, soil, and shade fraction images from the TM data. The resulting images were then used to estimate the endmember spectral response for MSS data by regressing each MSS spectral channel against the corresponding proportion values estimated for the same resolution cells from the TM mixture model. The evaluation of the predicted signatures was performed by comparing the corresponding fraction images derived from both the MSS and TM data acquired on 14 Sep. 1986. The techniques serves as a potential tool for integrating information in global studies where remote sensors with different spectral and spatial resolutions were used.

Shimabukuro, Yosio E.↗

The Castor 120 (TM) Motor: Development and Qualification Testing Results

This paper discusses Thiokol Corporation's static test results for the development and qualification program of the Castor 120(TM) motor. The demonstration program began with a 25,000-pound motor to demonstrate the new technologies and processes that would be used on the larger Castor 120(TM) motor. The Castor 120(TM) motor was designed to be applicable as a first stage, second stage, or strap-on motor. Static test results from the Castor 25 and two Castor 120(TM) motors are discussed in this paper. The results verified the feasibility of tailoring the propellant grain configuration and nozzle throat diameter to meet various customer requirements. The first and second motors were conditioned successfully at ambient temperature and 28 F, respectively, to demonstrate that the design could handle a wide range of environmental launch conditions. Furthermore, the second Castor 120(TM) motor demonstrated a systems tunnel and forward skirt extension to verify flight-ready stage hardware. It is anticipated that the first flight motor will be ready by the fall of 1994.

Jack G Hilden↗

DAG-TM Concept Element 11 CNS Performance Assessment: ADS-B Performance in the TRACON

Distributed Air/Ground (DAG) Traffic Management (TM) is an integrated operational concept in which flight deck crews, air traffic service providers and aeronautical operational control personnel use distributed decision-making to enable user preferences and increase system capacity, while meeting air traffic management (ATM) safety requirements. It is a possible operational mode under the Free Flight concept outlined by the RTCA Task Force 3. The goal of DAG-TM is to enhance user flexibility/efficiency and increase system capacity, without adversely affecting system safety or restricting user accessibility to the National Airspace System (NAS). DAG-TM will be accomplished with a human-centered operational paradigm enabled by procedural and technological innovations. These innovations include automation aids, information sharing and Communication, Navigation, and Surveillance (CNS) / ATM technologies. The DAG-TM concept is intended to eliminate static restrictions to the maximum extent possible. In this paradigm, users may plan and operate according to their preferences - as the rule rather than the exception - with deviations occurring only as necessary. The DAG-TM concept elements aim to mitigate the extent and impact of dynamic NAS constraints, while maximizing the flexibility of airspace operations

Raghavan, Rajesh S.↗

Landsat-D TM application to porphyry copper exploration

For a number of years Landsat data have been used to locate areas of iron oxide occurrences which might be associated with hydrothermal alteration zones. However, the usefulness of the Landsat data was restricted because of certain limitations of the spectral information provided by Landsat. A new generation multispectral scanner will, therefore, be carried by the fourth Landsat, which is to be launched in July, 1982. This instrument, called the Thematic Mapper (TM), will have seven channels and provide data with 30 m spatial resolution. Two of the spectral channels (1.6 micron and 2.2 micron) should allow detection of hydrous minerals. Possible applications of Landsat-D TM data for copper exploration were studied on the basis of a comparison of Landsat data with simulated TM data acquired using an aircraft scanner instrument. Three porphyr copper deposits in Arizona were selected for the study. It is concluded that the new Landsat-D TM scanner will provide Exploration geologists with a new improved tool for surveying mineral resources on a global basis.

Abrams, M.↗

Relative radiometric calibration of LANDSAT TM reflective bands

Raw thematic mapper (TM) calibration data from pre-launch tests and in-orbit acquisitions from LANDSAT 4 and 5 satellites are analyzed to assess the radiometric characteristics of the TM sensor. A software program called TM radiometric and algorithmic performance program (TRAPP) was used for the majority of analyses. Radiometric uncertainty in the final TM image originates from: (1) scene variability (solar irradiance and atmospheric scattering); (2) optical and electrical variability of the sensor; and (3) variability introduced during image processing.

Barker, J. L.↗

A physically-based transformation of Thematic Mapper data The TM tasseled cap

In an extension of previous simulation studies, a transformation of actual TM data in the six reflective bands is described which achieves three objectives: a fundamental view of TM data structures is presented, the vast majority of data variability is concentrated in a few (three) features, and the defined features can be directly associated with physical scene characteristics. The underlying TM data structure, based on three TM scenes as well as simulated data, is described, as are the general spectral characteristics of agricultural crops and other scene classes in the transformed data space.

Crist, E. P.↗

Evaluation of the Radiometric Quality of the TM Data Using Clustering, Linear Transformations and Multispectral Distance Measures

The radiometric quality of LANDSAT 4 TM data for the classification and identification of Earth surface features was evaluated. Techniques employed in the evaluation included clustering, data compression (linear transformations), multispectral distance measures, and hierarchical classification methods. TM and MSS data for the Chicago, Illinois test site were studied. In order to determine the radiometric quality of the TM thermal data for temperature mapping of surface water, a test site was selected within the area covered by the TM scene (Scene ID: 40101-16025) gathered over Illinois. This site was chosen because it includes a surface water body with a large range of temperatures, i.e., a cooling pond for the Dresden nuclear power plant and the junction of two rivers.

Bartolucci, L. A.↗

Investigation of TM Band-to-band Registration Using the JSC Registration Processor

When the Thematic Mapper (TM) imagery was first received and displayed in the fall of 1982, its radiometric lucidity and geometric fidelity was judged far superior to the multispectral scanner (MSS) imagery. The MSS data from the LANDSAT series of satellites have served well as the mainstay of satellite imagery for the remote sensing community up to now. Therefore, there is great anticipation as to the utility of this new IM imagery to advance the field of remote sensing. The thematic mapper (TM) band to band registration accuracy evaluation was discussed. In particular, the band to band registration accuracies of the TM data in the subpixel region were evaluated using the Johnson Space Center (JSC) registration processor which is ideally suited for this task. The JSC registration processor was also used to register one acquisition to another acquisition of multitemporal TM data acquired over the same ground track. The approach and the rationale behind the task, the description of the data set, the evaluation results, and the preliminary conclusions are discussed.

Yao, S. S.↗

Overview of TM Applications Research Reports

Applications-oriented users of TM data have every reason to be excited about the possibility of opening up other horizons using TM data. The data appear to be of excellent quality, and the investigations conducted to date, although preliminary, substantiate the findings of earlier research conducted with simulated TM data. Techniques used for sensor/data quality evaluation; data processing, analysis, and display; and comparisons of TM versus MSS data are summarized.

Williams, D. L.↗

Geologic Utility of LANSDAT-4 TM Data

The performance of the TM vis-a-vis various geological applications was quantified by analyzing: (1) the geological utility of the data with respect to the increased spatial resolution and number of bands (compared to the MSS); (2) the geometric accuracy; (3) the radiometric performance of the TM scanner. Preliminary analyses were performed on TM scenes: over Death Valley, California, and over southern Arizona. Both scenes were acquired in CCT-PT format, where the data were geometrically and radiometrically corrected. Overall, the TM data appears to contain a marked increase in geologically useful information; however, a number of instrumental or processing artifacts may well limit the ability of the geologist to fully extract this information.

Abrams, M.↗