Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TaB”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Evaluating the feasibility of LA-ICP-TOF-MS for the analysis of environmental particle collections

Laser ablation-inductively coupled plasma-time-of-flight-mass spectrometry (LA-ICP-TOF-MS) was employed to rapidly analyze environmental particle samples collected using aerosol contaminate extractors (ACE). The ACE particle collectors were placed at various distances (0.5, 1.3, and 4.5 km) from a source that released Ru-bearing particles. Samples for measurement were then generated (as sub-samples) from the ACE collection plates via particle “lift off” with gunshot residue (GSR) tabs. The LA-ICP-TOF-MS method was employed such that 10+ samples could be analyzed in a single unattended analytical session. A 3 × 1 mm area of individual GSR tab samples were analyzed in less than 30 minutes. This provided spatially resolved elemental and isotopic measurements of the particulate content and confirmed the presence of Ru-bearing particles within the complex background environmental particle loading. As anticipated, measurements showed collectors closest to the source had the highest concentration of the released Ru-bearing particles, while all collectors, regardless of distance, contained similar levels of background particles (e.g., Fe and Sr). Sequential scanning electron microscopy – automated particle analysis (SEM-APA) and LA-ICP-TOF-MS analysis was employed for method validation and a demonstration of the multi-modal approach. The same 2-dimensional region was analyzed by both methods and the particles identified via SEM-APA were also detected using LA-ICP-TOF-MS, with 100% accuracy. Overall, LA-ICP-TOF-MS demonstrated its utility for rapid elemental and isotopic particle analysis from environmental air samples.

Manard, Benjamin T. [Oak Ridge National Laboratory↗
DOE OSTI2021

An accurate, non-empirical method for incorporating decoherence into Ehrenfest dynamics

In mixed quantum-classical nonadiabatic molecular dynamics methods, the anchoring of the electronic wave function to a single nuclear geometry results in both quantitative and qualitative errors in the dynamics. In the context of both Ehrenfest and trajectory surface hopping methods, methods for incorporating decoherence are widely used to eliminate these errors. However, the accuracy of these methods often depends strongly on the parameterization of the decoherence time and/or other related quantities. Here, we present a refinement of the recently introduced collapse to a block (TAB) scheme for incorporating decoherence into Ehrenfest dynamics. The proposed approach incorporates an approximation to the history of the population dynamics and treats the coherence decay as Gaussian, rather than exponential. This method uses parameters that can be obtained from first principles, rather than empirical fitting. Application to one-dimensional models indicates excellent agreement with numerically exact simulations. We also introduce a second refinement to the TAB method: a robust linear least-squares algorithm for determining collapse probabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

VotE-Dams: a compilation of global dams' locations and attributes (v1)

This dataset represents a compilation of two global and three USA-specific datasets of dam locations and their attributes. The major hurdle toward developing this compilation was the identification of duplicates within the source datasets, especially given the variable precision of dam location coordinates. The most immediately-useful product in this dataset is a spreadsheet (VotE-Dams_v1.csv) that documents the unique dams found across the datasets, their coordinates, and their ids within the respective source datasets. We do not reproduce the source datasets (GRaND, GOODD, GeoDAR, NID, and EHA) here, but their download locations are provided in the README files ('Overview' tab). Some of the source datasets are provided as shapefiles, which require geospatial data software to open (e.g. QGIS/ArcGIS for graphical display, geopandas for Python, rgdal for R, many others freely available). The provided README documents metadata of the source datasets and provides attribute-linking information (i.e. matches attributes among various source datasets that contain the same, or similar, information but have different names). Note that the README is provided as both .xslx and a collection of .csvs (one per tab in the .xslx file). We suggest using the .xlsx version that preserves images, formatting, and sheets. .xlsx files can be viewed using (free) Google Docs or Microsoft Excel.Finally, we provide Technical Documentation.pdf that describes the procedures used to identify unique and duplicate dams.The title of this dataset refers to our 'Veins of the Earth' (VotE) project, which seeks to provide a flexible, scale-free representation of the Earth's river networks. Dams are a critical component of VotE as they heavily influence flows throughout river networks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Root biomass and traits across four lowland Panamanian forests from 0 - 1.2 m soil depths

Fine roots are key to ecosystem-scale nutrient, carbon (C), and water cycling, yet our understanding of fine root traits variation within and among tropical forests, one of Earth’s most C-rich ecosystems, is limited. We characterized root biomass, morphology, nutrient content, and arbuscular mycorrhizal fungal (AMF) colonization in 10 cm increments to 1.2 m depth across four distinct lowland Panamanian forests. The datasets provided include a .xlsx file for fine root characteristics across 10 cm increment depths to 1.2 m collected from late 2017 to 2018 across four different forests. Root characteristics include live fine root biomass, dead fine root biomass, coarse root biomass, specific root length, root diameter, root tissue density, specific root area, arbuscular mycorrhizal fungi colonization, root chemistry (e.g., organic chemistry), root %N, root %C, root C/N ratio, and root radiocarbon content. This .xlsx file contain four tabs with 1) Dataset; 2) Metadata with information about each column in the dataset; 3) The sampling methods summarized; 4) Sites information. We also provided csv files for each of these tabs. Additionally, a .kml file is provided with coordinates for all 32 plots included in the study across four forests (n = 8 plots per site/forest). This dataset serves as baseline data before a throughfall exclusion experiment, Panama Rainforest Changes with Experimental Drying (PARCHED), was implemented. No special software is needed to open these files.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Low Cost (CAPEX and variable): Tool design for cell and module fabrication with thin, free-standing silicon wafers

This project aimed to develop technologies that can potentially enable free-standing thin (<80 μm) wafer in today’s manufacturing lines with high production yield, and thereby reduce capex barriers of silicon photovoltaics cells and modules. One of the major benefits is that thin wafer dramatically reduces the amount of polysilicon required. As a result, it can lead to reduction in the capital expenditures associated with polysilicon refining and wafer fabrication, which together are more than half of the total capital expenditure to manufacture Si PV module. We focused our efforts on developing the tools needed to enable high yield fabrication of wafer, cell, and module with thin silicon wafers. However, as the wafer thickness reduces, the major challenge is that wafer breakage increases significantly. Three technological areas were explored in this project to improve the production yield of the silicon wafer, namely detection of edge cracks via dark-field near-infrared (NIR) scattering; (2) wafer handling using controlled temperature profiles; (3) manufacturable low-stress cell interconnection for multiwire. First, the formation of wafer cracks in submillimeter length is one of the reasons that causes wafer breakages. Crack detection tools are needed to enable us to locate and track the wafer crack during manufacturing, so that we can improve the process to reduce initialization. The state-of-the-art crack detection technique cannot fulfill the need for measuring submillimeter edge cracks detrimental for thin wafers. The prototype developed in this project demonstrates the scanning of microcracks near wafer edges. With a semi-automatic laboratory setup, the submillimeter cracks were reliably detected near the edges in multi-Si wafers. The smallest detectable crack is 200 µm in length in slow scans; and submillimeter cracks are detected in high-throughput scans at the scan speed of >0.5 m/s, which is compatible with the inline detection of a manufacturing line at least 1 sec/wafer. This detection limit is a significant advancement in comparison to the benchmarked industrial tool. Second, wafer handling with the well-controlled temperature profile was thought to be the solution to reduce crack initiation and propagation during the manufacturing. However, without crack detection being widely adopted in production line, we did not find a strong industrial pull toward this technology. We did an initial literature survey and then diverted our efforts to the other tasks. Third, the innovation on low-stress multi-wire interconnection tackles a fundamental problem in the standard interconnection scheme. The standard over-under “zig-zag” interconnection induces a significant amount of stress into the soldering point on the cell whenever PV module is under stress, e.g., thermal cycling, transportation, and installation. Therefore, the interconnection process was re-designed in this project to allow for significant movement between adjacent solar cells, e.g., due to thermal expansion, without building up stresses on the solar cells or solder joints. The new interconnection method with the cross-connect wire also simplifies the tabbing and stringing process by replacing the standard over-under method with an off-cell interconnect from top to bottom. A manual tabbing and stringing tool for this new process was prototyped in the lab to demonstrate the fabrication of this new interconnection design. During the test with brass sheets as our “testing cells”, it was found that the mechanical cycling test only broke the interconnection after more than 50,000 cycles, which is equivalent to more than 130 years of the day-and-night thermal cycles. Lastly, throughout the project, we continuously analyzed the PV market with techno-economic analysis to identify the opportunity for thin Si adoption. Even though the drastic cost reduction has already happened in the past five years, our analysis results indicated that we can still save quite significantly in both manufacturing cost and factory capex, Particularly, in order to grow the PV manufacturing capacity to multi-terawatt level, reducing the thickness of silicon wafer is one of the most effective ways to quickly reduce factory capex, and sustain the high growth rate. The technologies developed in this project are readily available to provide some assistances in tackling the production yield problem.

14 SOLAR ENERGY↗
DOE OSTI2021

Land-Based Wind Market Report: 2021 Edition

The U.S. Department of Energy's 2021 edition of its land-based wind market report provides an overview of key trends in the U.S. wind power market, with a focus on 2020. You can find a report, data file and presentation on the Files tab, below. Additionally, several data visualizations are available on the Visualizations tab. Highlights of this year’s update include: -Wind comprises a growing share of electricity supply: U.S. wind power capacity grew at a record pace in 2020, with 25 billion dollars invested in 16.8 GW of capacity. Wind energy output rose to account for more than 8% of the entire nation’s electricity supply, and is more than 20% in 10 states. At least 209 GW of wind are seeking transmission interconnection; 61 GW of this capacity are offshore wind and 13 GW are hybrid plants that pair wind with storage or PV. -Wind project performance has increased over time: The average capacity factor among recently built projects was over 40%, considerably higher than projects built earlier. The highest capacity factors are seen in the interior ‘wind belt’ of the country. -Turbines continue to get larger: Improved plant performance has been driven by larger turbines mounted on taller towers and featuring longer blades. In 2010, no turbines employed blades that were 115 meters in diameter or larger, but in 2020, 91% of newly installed turbines featured such rotors. Proposed projects indicate that total turbine height will continue to rise. -Low wind turbine pricing has pushed down installed project costs over the last decade: Wind turbine prices are averaging 775–850 dollars/kW. The average installed cost of wind projects in 2020 was 1,460 dollars/kW, down more than 40% since the peak in 2010, though stable for the last three years. The lowest costs were found in Texas and the (non-ISO) West. -Wind energy prices remain low, around 20 dollars/MWh in the interior of the country: After topping out at 70 dollars/MWh for power purchase agreements (PPAs) executed in 2009, the national average price of wind PPAs has dropped. In the interior ‘wind belt’ of the country, recent pricing is around 20 dollars/MWh. In the West and East, prices tend to average 30 dollars/MWh or more. These prices, which are possible in part due to federal tax support, fall below the projected future fuel costs of gas-fired generation. -Wind PPA prices are often attractive compared to wind’s grid-system market value: The value of wind in wholesale power markets is affected by the location of wind plants, their hourly output profiles, and how those characteristics correlate with real-time electricity prices and capacity markets. The market value of wind declined in 2020, following natural gas prices lower and averaging under 15 dolalrs/MWh in ERCOT, MISO, NYISO and SPP; higher values were seen in CAISO, ISO-NE and PJM. -The average levelized cost of wind energy is down to 33 dollars/MWh: Levelized costs, which exclude the impacts of federal tax incentives, vary across time and geography, but the national average stood at 33 dollars/MWh in 2020—down substantially historically, though consistent with the previous two years. Levelized costs were lowest in ERCOT, SPP, and the (non-ISO) West. -The health and climate benefits of wind in 2020 were larger than its grid-system value, and the combination of all three far exceeds the current levelized cost of wind: Wind generation reduces power-sector emissions of carbon dioxide, nitrogen oxides, and sulfur dioxide. These reductions, in turn, provide public health and climate benefits that vary regionally, but together are economically valued at an average of 76 dollars/MWh-wind nationwide in 2020. -The domestic supply chain for wind equipment is diverse: For wind projects recently installed in the U.S., domestically manufactured content is highest for nacelle assembly (>85%), towers (60-75%), and blades and hubs (30-50%), but is much lower for most components internal to the nacelle.

17 WIND ENERGY↗
DOE OSTI2022

Design, Processing, and Integration of Pouch-Format Cell for High-Energy Lithium-Sulfur Batteries

This project objective was to develop and demonstrate a lithium-sulfur (Li-S) battery in a pouch-format cell capable of achieving an energy density ≥ 500 Wh/kg while achieving a 1,000 cycle life. The research focused on cell optimization and fabrication addressing different technical barriers and challenges including: 1) thin lithium anode optimization; 2) current collector and tab attachment design; 3) cathode porosity control; 4) electrolyte to sulfur ratio control; 5) cell design; and 6) cell fabrication. The project developed and demonstrated various technologies to address these technical barriers and challenges. The project demonstrated a thin lithium anode by vapor deposition, a collector design and validation of laser welding of tab attachment method, a cathode porosity control strategy by binder optimization, a calendaring process control and surface/interface treatment, and an electrolyte to sulfur ratio control with influence on cell energy density. The sulfur cathode was optimized by tuning the formulation, optimizing the calendaring process, and introducing a novel electrode fabrication process. To address the electrolyte performance issue, the electrolyte optimization was achieved with additive and formulation tuning and the introduction of a dual-phase electrolyte system. In addition to the demonstration of the optimized electrode with a novel fast-curing coating process and dual-phase electrolyte, a coating separator was further developed to address the polysulfide shuttling issue. The resulting new cell design with these optimized cell components was demonstrated in the 1 Ah pouch cell with medium sulfur loading and moderate porosity (~ 4.5 mAh cm-2, 65% porosity) and showed an energy density of > 400 Wh/kg (with E/S ratio of 2.8). The Li-SPAN cell configuration was also evaluated in combination with a new dual-phase electrolyte system. Initial coin cell performance demonstrated cycle stability of >300 cycles with an estimated energy density of 300 Wh/kg at the pouch format level. The corresponding 1 Ah pouch format SPAN cells with the new polymer electrolyte were developed which has shown a stable capacity at 800-900 mAh for ~40 cycles so far.

25 ENERGY STORAGE↗
DOE OSTI2022

Land-Based Wind Market Report: 2022 Edition

The U.S. Department of Energy's 2022 edition of its Land-Based Wind Market Report provides an overview of key trends in the U.S. wind power market, with a focus on 2021. You can find a report, data file and presentation on the Files tab, below. Additionally, several data visualizations are available on the Visualizations tab. Despite ongoing supply chain challenges, wind energy in 2021 continued to see strong growth, technology improvements, and low prices in the U.S. Key highlights include: Wind comprises a growing share of electricity supply: U.S. wind power capacity grew at a strong pace in 2021, with the 13.4 GW of new additions representing a $\$20$ billion investment and 32% of all newly added U.S. generation capacity. Wind energy output rose to account for more than 9% of the entire nation’s electricity supply. At least 247 GW of wind are seeking transmission interconnection; 77 GW of this capacity are offshore wind and 19 GW are hybrid plants that pair wind with storage or solar PV. Wind project performance has increased over the decades: The average capacity factor among recently built projects was nearly 40%, considerably higher than projects built earlier. The highest capacity factors are seen in the interior ‘wind belt’ of the country. Turbines continue to get larger: Improved plant performance has been driven by larger turbines mounted on taller towers and featuring longer blades. In 2011, no turbines employed blades that were 115 meters in diameter or larger, but in 2021, 89% of newly installed turbines featured such rotors. Proposed projects indicate that total turbine height will continue to rise. Low wind turbine pricing has pushed down installed project costs over the last decade: Wind turbine prices averaged $\$800$–$\$950$/kW in 2021, a 5% to 10% increase from the year prior but substantially lower than in 2010. The average installed cost of wind projects in 2021 was $\$1,500$/kW, down more than 40% since the peak in 2010, though relatively stable in recent years. The lowest costs were found in Texas and the (non-ISO) West. Wind energy prices are on the rise, but generally remain low, around $\$20$/MWh in the interior of the country with higher prices in the West and East. After topping out above $\$75$/MWh for power purchase agreements (PPAs) executed in 2009, the national average price of wind PPAs has dropped—though supply-chain pressures have resulted in increased prices in recent years. In the interior ‘wind belt’ of the country, recent pricing is around $\$20$/MWh. In the West and East, prices tend to average above $\$30$/MWh. These prices, which are possible in part due to federal tax support, fall below the projected future fuel costs of gas-fired generation. Wind PPA prices are often attractive compared to wind’s grid-system market value: The value of wind in wholesale power markets is affected by the location of wind plants, their hourly output profiles, and how those characteristics correlate with real-time electricity prices and capacity markets. The market value of wind increased in 2021, averaging $\$16$/MWh in MISO, $\$19$/MWh in SPP, $\$23$/MWh in NYISO, $\$31$/MWh in ERCOT, $\$33$/MWh in PJM, $\$44$/MWh in ISO-NE, and $\$48$/MWh in CAISO. The average levelized cost of wind energy was $\$32$/MWh for plants built in 2021: Levelized costs, which exclude the impacts of federal tax incentives, vary across time and geography. The national average stood at $\$32$/MWh in 2021—down substantially historically, though relatively stable in recent years. Levelized costs were lowest in ERCOT, SPP, and the (non-ISO) West. The health and climate benefits of wind in 2021 were larger than its grid-system value, and the combination of all three far exceeds the current levelized cost of wind: Wind generation reduces power-sector emissions of carbon dioxide, nitrogen oxides, and sulfur dioxide. These reductions, in turn, provide public health and climate benefits that vary regionally, but together are economically valued at an average of over $\$90$/MWh-wind for plants built in 2021.

17 WIND ENERGY↗
DOE OSTI2024

Experimental and Theoretical Evaluation of Feed Flow Collar Design for Shell Fed Hollow Fiber Membrane Modules

An experimental and theoretical study of module collar design is presented here. Hollow fiber membranes are prepared by dip coating a poly(vinylidene) (PVDF) support with a polydimethylsiloxane (PDMS) gutter layer and a Pebax 2533 selective layer. Fiber bundles with a well-defined fiber packing are prepared using a 3D printed module. A parallel fiber bundle consisting of 4-9 uniformly spaced fibers is created with printed tabs that align the fibers and create a tubesheet. The tabs are sealed within a printed case that possesses a series of external ports for gas introduction and removal. Uniquely, both port location and the use of a collar to assist fluid distribution in the shell can be varied for the same fiber bundle. Experimental measurements are compared to computational fluid dynamics (CFD) simulations. The experimental module design allows high-fidelity representation of the fiber bundle and module case in the simulations. Comparisons between experiment and simulation are in good agreement over a broad range of experimental conditions. The detrimental effect of having ports located too close, leading to stagnation regions, is captured as well as the beneficial effects of using a collar for shell-side fluid distribution around the fiber bundle. Such results help validate the use of CFD to develop high-performance module designs.

Tran, Thien↗
DOE OSTI2026

Developing a GUI for the Robotic Test Stand

The introduction of this poster explains the technology behind DUNE’s far and near detectors and how passing neutrinos generate electrons that drift into a wire grid. I then explain how 3 ASICs manage signals received from electron interception. Next, the poster states how COLDATA chips are undergoing quality control by a Robotic Test Stand using a state machine. I further explained how earlier tests were done via a command line script and the necessity to implement a user-friendly Graphical User Interface with new features a command line can’t implement. For the implementation section, tools and methods for implementation are listed such as Python, tkinter, and GitHub as well as how multithreading and queue implementation was necessary for GUI functionality. Then, I elaborated on the GUIs new features. Finally, I explain how the GUI will be distributed across multiple institutions and future changes planned for the GUI. Photos of the RTS, far detector cave, diagram of anode assembly plane, COLDATA chips, set up tab, result tab, and legacy command line interface are shown.

Gutierrez Villanueva, Jaziel [DuPage Coll.]↗
DOE OSTI2025

National summary for agricultural crops and residues, 2041

This dataset contains national summary data on agricultural crop and residue production, which include agricultural crop, agricultural residue, herbaceous energy crop, and woody energy crop. Each tab in the Excel file contains information corresponding to a resource category, and within each tab, there is a structured table presenting resource production (in dry short ton) by offered price (in USD per dry short ton) across multiple scenarios (mature-market low, mature-market medium, and mature-market high). Consistent with the 2023 Billion-Ton report for agricultural resources, these scenarios represent potential production scenarios for 2041. List of the resources shown in this dataset: - Agricultural crop: Barley, Corn, Cotton, Grain sorghum, Hay, Oats, Rice, Soybeans, Wheat - Agricultural residue: Barley straw, Corn stover, Oats straw, Sorghum stubble, Wheat straw - Herbaceous energy crop: Biomass sorghum, Energy cane, Miscanthus, Switchgrass - Woody energy crop: Eucalyptus, Pine, Poplar, Willow

agricultural crop↗
DOE OSTI2023

Drop Interactions with the Conical Shock Structure Generated by a Mach 4.5 Projectile

This work presents measurements of liquid drop deformation and breakup time behind approximately conical shock waves and evaluates the predictive capabilities of low-order models and correlations developed using planar shock experiments. A conical shock was approximated by firing a bullet at Mach 4.5 past a vertical column of water drops with a mean initial diameter of $192$ $\mu$m. The time-resolved drop position and maximum transverse dimension were characterized using backlit stereo images taken at 500 kHz. The gas density and velocity fields experienced by the drops were estimated using a Reynolds-averaged Navier–Stokes simulation of the bullet. Classical correlations predict drop breakup times and deformation in error by a factor of 3 or more. The Taylor analogy breakup (TAB) model predicts deformed drop diameters that agree within the confidence bounds of the ensemble-averaged experimental values using a dimensionless constant $C$ 2 = $2$ compared to the accepted value $C$ 2 = $2/3$. In conclusion, results demonstrate existing correlations are inadequate for predicting the drop response to the three-dimensional relaxation of the flowfield downstream of a conical-like shock and suggest the TAB model results represent a path toward improved predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Sound-masking device for a roll-up door

A portable sound-masking device for placing on a roll-up door having a number of horizontally-extending elements. The sound-masking device has a fixture, a magnet, and a transducer. The fixture has an inner face, an outer face, and a pair of spaced-apart tabs protruding from the inner face, the tabs being configured to engage one of the horizontally-extending elements of the roll-up door. The magnet is fastened to the inner face of the fixture and provides a force that tethers the sound-masking device to the roll-up door. The transducer is fastened to the outer face and is configured to emit sound-masking noise.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2020

Flex plate with removable inserts and cover

Technologies are described for methods and systems effective for flex plates. The flex plates may comprise a base plate. The base plate may include walls that define an insert location opening in the base plate. The insert location opening in the base plate may be in communication with a securement area. The flex plates may comprise an insert. The insert may include a reservoir region and a crystallization region separated by a wall including channels. The reservoir region and the crystallization region may include a backing. The insert may further include securement tabs. The securement tabs may be configured to secure the insert to the base plate at the securement area.

42 ENGINEERING↗
DOE OSTI2021

Flex plate with removable inserts and cover

Technologies are described for methods and systems effective for flex plates. The flex plates may comprise a base plate. The base plate may include walls that define an insert location opening in the base plate. The insert location opening in the base plate may be in communication with a securement area. The flex plates may comprise an insert. The insert may include a reservoir region and a crystallization region separated by a wall including channels. The reservoir region and the crystallization region may include a backing. The insert may further include securement tabs. The securement tabs may be configured to secure the insert to the base plate at the securement area.

Soares, Alexei S.↗
DOE OSTI2021

Lithium metal pouch cells and methods of making the same

A lithium metal pouch cell having a specific energy ≥300 Wh·kg−1 includes an anode comprising lithium metal and an anode current collector, the anode having an areal capacity N (mAh·cm −2 ); a cathode comprising a cathode material and a cathode current collector, the cathode having an a real capacity P (mAh·cm −2 ), wherein a ratio of N/P is within a range of 0.02 to 5; an electrolyte having an electrolyte mass E and comprising a lithium active salt and a solvent, the lithium metal pouch cell having an electrolyte mass to cell capacity (E/C) ratio within a range of 1 to 6 g·Ah −1 ; a separator positioned between the anode and the cathode; and a packaging material defining a pouch enclosing the anode, cathode, electrolyte, and separator; wherein a protruding tab of the anode current collector and a protruding tab of the cathode current collector are external to the pouch.

Xiao, Jie↗
DOE OSTI2023

Lithium metal pouch cells and methods of making the same

A lithium metal pouch cell having a specific energy ≥300 Wh·kg -1 includes an anode comprising lithium metal and an anode current collector, the anode having an areal capacity N (mAh·cm −2 ); a cathode comprising a cathode material and a cathode current collector, the cathode having an a real capacity P (mAh·cm −2 ), wherein a ratio of N/P is within a range of 0.02 to 5; an electrolyte having an electrolyte mass E and comprising a lithium active salt and a solvent, the lithium metal pouch cell having an electrolyte mass to cell capacity (E/C) ratio within a range of 1 to 6 g·Ah −1 ; a separator positioned between the anode and the cathode; and a packaging material defining a pouch enclosing the anode, cathode, electrolyte, and separator; wherein a protruding tab of the anode current collector and a protruding tab of the cathode current collector are external to the pouch.

Xiao, Jie↗