Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THORIUM OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Warm white light emitting ThO{sub 2}:Sm{sup 3+} nanorods: Cationic surfactant assisted reverse micellar synthesis and Photoluminescence properties

Graphical abstract: - Highlights: • ThO{sub 2}:Sm{sup 3+} nanoparticles have been synthesized using cationic surfactant assisted reverse micellar route. • HRTEM shows the formation of thoria nanorods. • Photoluminescence investigation shows host as well as samarium ion emission. • Time resolved fluorescence spectroscopy shows the presence of two types of samarium ion in thoria host. - Abstract: Sm{sup 3+} activated thorium oxide nanorods were synthesized by cationic surfactant assisted reverse micellar route. Phase purity, morphological and luminescent properties were investigated by X-ray diffraction, high resolution transmission electron microscopy and photoluminescence spectroscopy. Upon UV light excitation (245 nm), ThO{sub 2}:Sm{sup 3+} exhibited host emission at 447 nm, along with characteristic emission lines of Sm{sup 3+} at 569, 609, 662 and 716 nm. Lifetime spectroscopy shows the presence of two types of Sm{sup 3+} (τ = 1.1 ms and 4.9 ms) with different asymmetric ratios.

36 MATERIALS SCIENCE↗

Design study of long-life PWR using thorium cycle

Design study of long-life Pressurized Water Reactor (PWR) using thorium cycle has been performed. Thorium cycle in general has higher conversion ratio in the thermal spectrum domain than uranium cycle. Cell calculation, Burn-up and multigroup diffusion calculation was performed by PIJ-CITATION-SRAC code using libraries based on JENDL 3.2. The neutronic analysis result of infinite cell calculation shows that {sup 231}Pa better than {sup 237}Np as burnable poisons in thorium fuel system. Thorium oxide system with 8%{sup 233}U enrichment and 7.6{approx} 8%{sup 231}Pa is the most suitable fuel for small-long life PWR core because it gives reactivity swing less than 1%{Delta}k/k and longer burn up period (more than 20 year). By using this result, small long-life PWR core can be designed for long time operation with reduced excess reactivity as low as 0.53%{Delta}k/k and reduced power peaking during its operation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Treatment of Magnesium-Thorium Alloy Used in Military Defence Equipment by Separation of Thorium and/or Thermal Oxidation - 17009

Magnesium-alloys doped with thorium (Th, 3% by weight and with a total activity content in the alloy of 120 Bq/g) to improve mechanical properties has been used in, among other applications, military equipment such as in the jet-engines in military aircraft. The material cannot, due to the presence of the radioactive Th, be handled as an ordinary scrap metal. It needs to be treated to render a more stable waste form prior to final disposal in which the amount of disposed metallic magnesium is limited due to the pyrophoric properties of such type of materials. By thermally treating the material it is possible to transform the alloy into oxide form (MgO and ThO{sub 2}) which is a much more stable form than metallic. This itself enables a form suitable for final disposal of the material. The oxidation step does however lead to an increase in volume and is therefore not an optimal treatment method. It is possible to treat the metal oxide powder in order to get a better volume reduction such as by super compaction but a better result can be obtained by separating the Th from the alloy, leaving a much smaller volume for final disposal. One way of separating the Th from the metal is by dissolution of metallic material in acid followed by directed precipitation of Th as Th-oxalate. Several parameters such as the choice of acid, metal concentration in the acid solution, pH prior to precipitation and amount of added oxalic acid have been investigated. Another method to separate Th from Mg is to perform a selective dissolution of MgO from an MgO/ThO{sub 2} mixture with HNO{sub 3} leaving only ThO{sub 2} as a residue. These tests had to be preceded with an oxidation of the alloy. The tests show that it is possible to separate Th from the metal alloy by either dissolution followed by precipitation or selective dissolution of MgO from an MgO/ThO{sub 2} mixture. This leads to very effective volume reduction of the waste. For the direct dissolution and precipitation tests typically > 95% of the magnesium can be found in the acid solution while 99.5 % of the Th is found as a solid in the filters. For the oxide dissolution tests typically 98% of the Th can be separated from the bulk material, leaving the acid solution possible to free release and dispose of in the same way as for the previous method. (authors)

36 MATERIALS SCIENCE↗

Magnesium-zinc reduction is effective in preparation of metals

Uranium, thorium, and plutonium are effectively prepared by magnesium-zinc reduction, using uranium oxides, thorium dioxide, and plutonium dioxide as starting materials. This technique is also useful in performing reduction of metals such as zirconium and titanium.

Knighton, J. B.↗

The effect of yttrium and thorium on the oxidation behavior of Ni-Cr-Al alloys

The effect of quaternary additions of 0.5% Y, 0.5 and 1.0% Th to a base alloy of Ni-10CR-5Al on the oxidation behavior and mechanism was studied during oxidation in air over the range of 1000 to 1200 C. The presence of yttrium decreased the oxidation kinetics slightly, whereas, the addition of thorium caused a slight increase. Oxide scale adherence was markedly improved by the addition of the quaternary elements. Although a number of oxides formed on yttrium containing alloys, quantitative X-ray diffraction clearly showed that the rate-controlling step was the diffusion of aluminum through short circuit paths in a thin layer of alumina that formed parabolically with time. Although the scale adherence of the yttrium containing alloy was considerably better than the base alloys, spalling did occur that was attributed to the formation of the voluminous YAG particles which grew in a mushroom-like manner, lifting the protective scale off the subrate locally. The YAG particles formed primarily at grain boundaries in the substrate in which the yttrium originally existed as YNi9.

Kumar, A.↗

On the confluence of ultrafast high-temperature sintering and flash sintering phenomena

Ultrafast high-temperature sintering (UHS) and flash sintering are novel methods for rapid sintering of ceramics, often completed in just a few seconds. Here, we show that both also share two additional features: an abrupt rise in electrical conductivity, which is electronic, and electroluminescence. More fundamentally, both are related to phonon physics where MD calculations have shown that proliferation of phonons at the edge of the Brillouin zone can induce Frenkel pairs without the application of electrical fields. Here, we show that, indeed, heating without the application of electric field, can also induce flash: Rapid heating processes of thin films of an oxide-salt deposited on silk fibers, with a propane torch, are shown to induce electronic conductivity, electroluminescence, and rapid sintering of the oxide. Further, the discussion in this article harkens back to two inventions, more than a century ago, which can now be related to flash and UHS: (i) the Nernst glow lamp circa 1900, made from zirconia, and (ii) the Welsbach mantle, constituted from ceria doped thorium oxide, in the late nineteenth century. Thus, the confluence between high heating rate and electric field induced flash phenomena links the past to the new. The emerging question is how injection of phonons that has been shown to create Frenkels can further induce high electronic conductivity and electroluminescence in oxides. Both electronic conductivity and luminescence are likely related to the generation of electron–hole pairs.

36 MATERIALS SCIENCE↗

Use of boiled hexamethylenetetramine and urea to increase the porosity of cerium dioxide microspheres formed in the internal gelation process

Cerium dioxide (CeO 2 ) is a commonly used simulant for plutonium dioxide and for plutonium (Pu) in a mixed uranium (U) and Pu oxide [(U, Pu)O 2 ] in nuclear fuel development. This effort developed CeO 2 microspheres with different porosities and diameters for use in a crush-strength study. The internal gelation technique has produced CeO 2 microspheres with limited initial porosity. When an equal molar solution of urea and hexamethylenetetramine (HMTA) is gently boiling for 1 hr and used in the gelation process, the crystallite size and porosity of mixed U and thorium oxide microspheres and the (U, Pu)O 2 microspheres increased significantly. In this study with cerium, the combination of ammonium cerium nitrate and 1-h boiled HMTA-urea failed to produce a stable feed broth. However, when the 1-h heated HMTA-urea was combined with unheated HMTA-urea in 1 to 3 volume ratio or the boiling time of the HMTA-urea was reduced to 15-20 min, a stable solution of HMTA, urea, and Ce was formed at 273 K. This new Ce solution produced CeO 2 microspheres with much higher initial porosities. Intermediate porosities were possible when the heated HMTA/urea was aged prior to use.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Sequential Bond Dissociation Energies of Th + (CO) x , x = 3–6: Guided Ion Beam Collision-Induced Dissociation and Quantum Computational Studies

Collision-induced dissociation (CID) of [Th,xC,xO] + , x = 3–6, with Xe is performed using a guided ion beam tandem mass spectrometer (GIBMS). Products are formed exclusively by the loss of CO ligands. Analyses of the kinetic energy-dependent CID product cross sections yield bond dissociation energies (BDEs) of (CO) x–1 Th + –CO at 0 K as 1.09 ± 0.05, 0.82 ± 0.07, 0.63 ± 0.05, and 0.70 ± 0.05 eV, respectively. Different structures of [Th,xC,xO] + were explored using various electronic structure methods, and BDEs for CO ligand loss from precursor [Th,xC,xO] + complexes were computed. Both experimental and theoretical results corroborate that the structures of [Th,xC,xO] + , x = 3–6, formed experimentally are homoleptic thorium cation carbonyl complexes, Th + (CO) x . The nonmonotonic trend in experimental BDEs is reproduced theoretically, although ambiguities in the spin states of the x = 4–6 complexes (doublet or quartet) remain. BDEs calculated at the coupled cluster with single, double, and perturbative triple excitations (CCSD(T))/cc-pVXZ//B3LYP/cc-PVXZ (X = T and Q) level and a complete basis set (CBS) extrapolation agree reasonably well with the experimental values for all complexes. Thorium oxide ketenylidene carbonyl cations, OTh + CCO(CO) y , y = 1–4, were calculated to be the most stable structures of [Th,xC,xO] + , x = 3–6, respectively; however, these are not observed in our experiment. Potential energy profiles (PEPs) having either quartet or doublet spin calculated at the B3LYP/cc-pVQZ level suggest that the failure to observe OTh + CCO(CO) y , y = 1–4, is the result of a barrier corresponding to the C–C bond formation, making the formation of OTh + CCO(CO) y inaccessible kinetically under the present experimental conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic Model for ThO 2 (am) Solubility in Alkaline Silica Solutions

No thermodynamic data for Th complexes with aqueous Si are available. To obtain such data, extensive studies on ThO 2 (am) solubility were carried out as functions of: (1) a wide range of aqueous silica concentrations (0.0004 to 0.14 mol•L -1 ) at fixed pH values of about 10, 11, 12, and 13; and (2) and variable pH (ranging from 10 to 13.3) at fixed aqueous Si concentrations of about 0.006 mol•L -1 or 0.018 mol•L -1 . The samples were equilibrated over long periods (ranging up to 487 days), and the data showed that steady-state concentrations were reached in < 29 days. X-ray diffraction, FTIR, and Raman analyses of the equilibrated solid phases showed that the Th solids were amorphous ThO2(am) containing some adsorbed Si. The solubility of ThO 2 (am) at pH values ranging from 10 to 13.3 at fixed 0.018 mol•L -1 aqueous Si concentrations decreases rapidly with an increase in pH, and increases dramatically with an increase in Si concentrations beyond about 0.003 mol•L -1 at fixed pH values > 10. The data were interpreted using both the Pitzer and SIT models, and required only the inclusion of one mixed-hydroxy-silica complex of Th [Th(OH) 3 (H 3 SiO 4 ) 3 2- ]. Both models provided similar complexation constant values for the formation of this species. Density functional theory calculations predict complexes of this stoichiometry, having six-fold coordination of the Th cation, to be structurally stable. Predictions based on the fitted value of log 10 K 0 =-18.5±0.7 for the ThO 2 (am) solubility reaction involving Th(OH) 3 (H 3 SiO 4 ) 3 2- [ThO 2 (am)+3H 4 SiO 4 +H 2 O↔Th(OH) 3 (H 3 SiO 4 ) 3 2- +2H + ], along with the thermodynamic data for aqueous Si species reported in the literature, agreed closely with the extensive experimental data and showed that under alkaline conditions aqueous Si makes very strong complexes with Th.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Nuclear thermionic converter

Efficient nuclear reactor thermionic converter units are described which can be constructed at low cost and assembled in a reactor which requires a minimum of fuel. Each converter unit utilizes an emitter rod with a fluted exterior, several fuel passages located in the bulges that are formed in the rod between the flutes, and a collector receiving passage formed through the center of the rod. An array of rods is closely packed in an interfitting arrangement, with the bulges of the rods received in the recesses formed between the bulges of other rods, thereby closely packing the nuclear fuel. The rods are constructed of a mixture of tungsten and thorium oxide to provide high power output, high efficiency, high strength, and good machinability.

Phillips, W. M.↗

Commercial use of materials processing in space

The paper examines the scientific and commercial aspects of Materials Processing in the Space program. The elimination of gravity driven convection in molten materials can preclude undesirable stirring and mixing during crystal growth, and improve the casting of alloys and composites, chemical reactions, and the separation of biological materials. The elimination of hydrostatic pressure will allow alloy heat-treatment without distortion and growth of heavy crystals, such as thorium oxide, and containerless processing of liquids and molten materials. On the other hand, more sophisticated process control and diagnostic methods in sample preparation and temperature control must be developed, concluding that space made products of commercial interest are likely to be low volume, high value items.

Zoller, L. K.↗

Evaluation of GOES encoder lamps

Aging characteristics and life expectancies of flight quality, tungsten filament, encoder lamps are similar to those of 'commercial' grade gas filled lamps of similar construction, filament material and filament temperature. The aging and final failure by filament burnout are caused by single crystal growth over large portions of the filament with the concomitant development of facets and notches resulting in reduction of cross section and mechanical weakening of the filament. The life expectancy of presently produced lamps is about one year at their nominal operating voltage of five volts dc. At 4.5 volts, it is about two years. These life times are considerably shorter, and the degradation rates of lamp current and light flux are considerably higher, than were observed in the laboratory and in orbit on lamps of the same type manufactured more than a decade ago. It is speculated that the filaments of these earlier lamps contained a crystallization retarding dopant, possibly thorium oxide. To obtain the desired life expectancy of or = to four years in present lamps, operating voltages of or = to four volts dc would be required.

Viehmann, W.↗

Influence of the temperature of electrode material on its disintegration under the action of an arc discharge in hydrogen

An analysis is made of the electrophysical processes occurring at the end surface of rod electrodes during constant and alternating arc discharge in hydrogen. Experiments are reported on the effect of surface temperature of tungsten electrodes on their erosion. The influence of activating additions of thorium oxide, the structure of the tungsten, and the gas surrounding the electrode on the specific thermal loading and the erosion of the electrodes is discussed.

Bolotov, A. V.↗

Arcjet cathode phenomena

Cathode tips made from a number of different materials were tested in a modular arcjet thruster in order to examine cathode phenomena. Periodic disassembly and examination, along with the data collected during testing, indicated that all of the tungsten-based materials behaved similarly despite the fact that in one of these samples the percentage of thorium oxide was doubled and another was 25 percent rhenium. The mass loss rate from a 2 percent thoriated rhenium cathode was found to be an order of magnitude greater than that observed using 2 percent thoriated tungsten. Detailed analysis of one of these cathode tips showed that the molten crater contained pure tungsten to a depth of about 150 microns. Problems with thermal stress cracking were encountered in the testing of a hafnium carbide tip. Post test analysis showed that the active area of the tip had chemically reacted with the propellant. A 100 hour continuous test was run at about 1 kW. Post test analysis revealed no dendrite formation, such as observed in a 30 kW arcjet lifetest, near the cathode crater. The cathodes from both this test and a previously run 1000 hour cycled test displayed nearly identical arc craters. Data and calculations indicate that the mass losses observed in testing can be explained by evaporation.

Curran, Francis M.↗

Arcjet Cathode Phenomena

Cathode tips made from a number of different materials were tested in a modular arcjet thruster in order to examine cathode phenomena. Periodic disassembly and examination, along with the data collected during testing, indicated that all of the tungsten-based materials behaved similarly despite the fact that in one of these samples the percentage of thorium oxide was doubled and another was 25 percent rhenium. The mass loss rate from a 2 percent thoriated rhenium cathode was found to be an order of magnitude greater than that observed using 2 percent thoriated tungsten. Detailed analysis of one of these cathode tips showed that the molten crater contained pure tungsten to a depth of about 150 microns. Problems with thermal stress cracking were encountered in the testing of a hafnium carbide tip. Post test analysis showed that the active area of the tip had chemically reacted with the propellant. A 100 hour continuous test was run at about 1 kW. Post test analysis revealed no dendrite formation, such as observed in a 30 kW arcjet lifetest, near the cathode crater. The cathodes from both this test and a previously run 1000 hour cycled test displayed nearly identical arc craters. Data and calculations indicate that the mass losses observed in testing can be explained by evaporation.

Curran, Francis M.↗

Granulation of fine powder

A mixture of fine powder including thorium oxide was converted to granulated powder by forming a first-green-body and heat treating the first-green-body at a high temperature to strengthen the first-green-body followed by granulation by crushing or milling the heat-treated first-green-body. The granulated powder was achieved by screening through a combination of sieves to achieve the desired granule size distribution. The granulated powder relies on the thermal bonding to maintain its shape and structure. The granulated powder contains no organic binder and can be stored in a radioactive or other extreme environment. The granulated powder was pressed and sintered to form a dense compact with a higher density and more uniform pore size distribution.

36 MATERIALS SCIENCE↗