Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMODYNAMIC MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Guiding Principles for Geochemical/Thermodynamic Model Development and Validation in Nuclear Waste Disposal: A Close Examination of Recent Thermodynamic Models for H + —Nd 3+ —NO 3 - (—Oxalate) Systems

Development of a defensible source-term model (STM), usually a thermodynamical model for radionuclide solubility calculations, is critical to a performance assessment (PA) of a geologic repository for nuclear waste disposal. Such a model is generally subjected to rigorous regulatory scrutiny. In this article, we highlight key guiding principles for STM model development and validation in nuclear waste management. We illustrate these principles by closely examining three recently developed thermodynamic models with the Pitzer formulism for aqueous H + —Nd 3+ —NO 3 - (—oxalate) systems in a reverse alphabetical order of the authors: the XW model developed by Xiong and Wang, the OWC model developed by Oakes et al., and the GLC model developed by Guignot et al., among which the XW model deals with trace activity coefficients for Nd(III), while the OWC and GLC models are for concentrated Nd(NO 3 ) 3 electrolyte solutions. The principles highlighted include the following: (1) Principle 1. Validation against independent experimental data: A model should be validated against experimental data or field observations that have not been used in the original model parameterization. We tested the XW model against multiple independent experimental data sets including electromotive force (EMF), solubility, water vapor, and water activity measurements. The results show that the XW model is accurate and valid for its intended use for predicting trace activity coefficients and therefore Nd solubility in repository environments. (2) Principle 2. Testing for relevant and sensitive variables: Solution pH is such a variable for an STM and easily acquirable. All three models are checked for their ability to predict pH conditions in Nd(NO 3 ) 3 electrolyte solutions. The OWC model fails to provide a reasonable estimate for solution pH conditions, thus casting serious doubt on its validity for a source-term calculation. In contrast, both the XW and GLC models predict close-to-neutral pH values, in agreement with experimental measurements. (3) Principle 3. Honoring physical constraints: Upon close examination, it is found that the Nd(III)-NO 3 association schema in the OWC model suffers from two shortcomings. Firstly, its second stepwise stability constant for Nd(NO 3 ) 2+ (log K 2 ) is much higher than the first stepwise stability constant for NdNO 3 2+ (log K 1 ), thus violating the general rule of (log K 2 –log K 1 ) < 0, or $\frac{K1}{K2}$>1. Secondly, the OWC model predicts abnormally high activity coefficients for Nd(NO 3 ) 2 + (up to ~900) as the concentration increases. (4) Principle 4. Minimizing degrees of freedom for model fitting: The OWC model with nine fitted parameters is compared with the GLC model with five fitted parameters, as both models apply to the concentrated region for Nd(NO 3 ) 3 electrolyte solutions. The latter appears superior to the former because the latter can fit osmotic coefficient data equally well with fewer model parameters. The work presented here thus illustrates the salient points of geochemical model development, selection, and validation in nuclear waste management.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thermodynamic Model for Uranium Release from Hanford Site Tank Residual Waste

A thermodynamic model of U phase solubility and paragenesis was developed for Hanford tank residual waste that will remain after tank closure. The model was developed using a combination of waste composition data, waste leach test data, and thermodynamic modeling of the leach test data. The testing and analyses were conducted using actual Hanford tank residual waste. Positive identification of the U phases by X-ray diffraction (XRD) was generally not possible because solids in the waste were amorphous, or below the detection limit of XRD for both as-received residual waste and leached residual waste. Three leachant solutions were used in the studies, dionized water, CaCO3 saturated solution, and Ca(OH)2 saturated solution. Thermodynamic modeling verified that equilibrium between U phases in the initial residual waste samples and the leachants was attained in less than a month. The paragenetic sequence of secondary phases that occur as waste leaching progresses for two closure scenarios was identified. These results have significant implications for tank closure design.

54 ENVIRONMENTAL SCIENCES↗

Dark-energy thermodynamic models

We study cosmological consequences of dark-energy thermodynamic models. The assumption that dark energy is conformed of quanta, and an extensivity argument generalize its equation of state. This implies that dark energy and another key component exchange energy. The energy densities of dark energy and the other component then tend asymptotically to a constant, thus explaining the coincidence of dark matter and dark energy today. On the other hand, a model of non-relativistic particles in a Bose-Einstein condensate, with a short-range attractive interaction, produces acceleration. It is shown that the phantom-acceleration regime, at the beginning of the universe, solves the horizon problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fractionation of REE, U, and Th in natural ore-forming hydrothermal systems: Thermodynamic modeling

This contribution presents a thermodynamic model revealing the mechanisms responsible for separation of Heavy and Light Rare Earth (HREE and LREE) phosphates in natural hydrothermal systems at temperatures of 250–350 °C. Our calculations were performed for an isothermal column of rock containing 0.5 wt% of apatite (Ca phosphate), which served as an immobilizing agent for REE dissolved in the solution. REE were transported by 10 wt% NaCl acidic solution. The model accounted for formation of REE phosphate solid solutions through a regular mixing model. It demonstrates that hydrothermal flushing can efficiently separate REE forming xenotime (HREE phosphate solid solutions) at the beginning of the column, and re-transportation of monazite (LREE rich) to the end of the column. This separation is primarily due to the fact that at elevated temperatures stability LREE chloride complexes is significantly higher than that for HREE. The model also evaluates behavior of U and Th, which accompany REE in vast majority of natural locations. It was found that U strongly fractionates to xenotime, whereas Th fractionates to monazite. Finally, this phenomenon can be explained by the differences in crystal-chemical characteristics between monazite and xenotime, and the mobility of Th in aqueous solutions at elevated temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic Modeling and Experimental Study of the Fe-Cr-Zr System

Wide applications of zircaloys, stainless steels and their interactions in nuclear reactors require the knowledge on phase stability and thermodynamic property of the Fe-Cr-Zr system. This knowledge is also important to develop new Zr-contained Fe-Cr ferritic steels. This work aims at developing thermodynamic models for describing phase stability and thermodynamic property of the Fe-Cr-Zr system using the Calphad approach coupled with experimental study. Thermodynamic descriptions of the Fe-Cr and Cr-Zr systems were either directly adopted or slightly modified from literature. The Fe-Zr system has been remodeled to accommodate recent ab-initio calculation of formation enthalpies of various Fe-Zr compounds. Reliable ternary experimental data and thermodynamic models were mainly available in the Zr-rich region. Therefore, selected ternary alloys located in the vicinity of the eutectic valley of (Fe,Cr,Zr) and (Fe,Cr)2Zr laves phase in the Fe-rich region have been experimentally investigated in this study. Microstructure has been examined by using scanning electron microscope, energy-dispersive Xray spectroscopy and X-ray diffraction. These experimental results, along with the literature data were then used to develop thermodynamic models for phases in the Fe-Cr-Zr system. Calculated phase equilibria and thermodynamic properties of the ternary system yield satisfactory agreements with available experimental data, which gives the confidence to use these models as building blocks for developing a Zr, Fe and Cr contained multicomponent thermodynamic database for broader applications in nuclear reactors.

Yang, Ying↗

Extended thermodynamic model for high salinity produced waters

To support the development of desalination processes for high salinity produced waters, we developed a comprehensive thermodynamic model that reliably predicts the thermodynamic properties and phase behavior of produced water. Here this study extends a previously developed thermodynamic model for the aqueous hexary oceanic salt system by incorporating the Sr 2+ and Ba 2+ ions. Based on the electrolyte nonrandom two-liquid theory, the model requires two adjustable binary interaction parameters for each water-electrolyte and electrolyte-electrolyte pair that has a common ion. The binary interaction parameters for the electrolyte-electrolyte pairs involving Sr 2+ and Ba 2+ ions were identified using thermodynamic and salt solubility data. The model was validated for temperatures from 273.15 K to 473.15 K and electrolyte concentrations from infinite dilution to salt saturation. Extension of the model to include HCO 3 − , CO 3 2− , and CO 2 is currently in progress.

42 ENGINEERING↗

Thermodynamic modeling of aqueous acetic acid, butyric acid, and lactic acid solutions

Based on the activity coefficient – fugacity coefficient approach, a rigorous thermodynamic modeling study is presented for accurate correlation of vapor-liquid equilibrium data of aqueous solutions of acetic acid (293 to 391 K), butyric acid (325 to 436 K), lactic acid (378 to 409 K), and acetic acid + butyric acid binary mixture (358 to 421 K). In addition, the pH data of the three aqueous, single carboxylic acid solutions were measured at 298 to 328 K and successfully correlated. Given that these aqueous carboxylic acid solutions exhibit various degrees of association behavior in both vapor and liquid phases, the thermodynamic models considered for this study include the Redlich-Kwong equation of state (RK-EoS) and the Hayden-O’Connell equation of state (HOC-EoS) for the vapor phase fugacity coefficients and the electrolyte non-random two-liquid model (eNRTL) and the association electrolyte non-random two-liquid model (AeNRTL) for the liquid phase activity coefficients. The combination of the HOC-EoS for the vapor phase and the AeNRTL model for the liquid phase is found to provide the best correlation results, consistent with the fact that the HOC-EoS and the AeNRTL model explicitly account for association behaviors in the vapor phase and the liquid phase, respectively.

09 BIOMASS FUELS↗

Bayesian characterization and forward propagation of the uncertainty in thermodynamic models for redox active materials

Demonstrating the thermodynamic efficiency of hydrogen conversion processes using various materials is a critical step in developing new technologies for storing concentrated solar energy, and is largely accomplished by using a thermodynamic model derived from experimental data. A main goal of this project is to calculate the uncertainty of the thermodynamic efficiency by calculating the uncertainty of the components that feed into the efficiency. Many different models and data sets were used to test the workflow. First, the models were fit to the data using a Bayesian Inference and a method called Markov Chain Monte Carlo (MCMC), which found the maximum a priori parameters, and a posterior probability distribution of the parameters. Next, the different models were compared to each other using model evidence values. It was found that for cleaner data sets, overfitting had not yet been reached, and the most complicated model was ideal, but on the noisier data sets, the less complex models were favored because the more complicated models resulted in overfitting. Next, forward propagation was used to calculate the enthalpy change and its associated uncertainty. A few variations on the models were tried, such as fitting in a different variable, producing negligible or negative effects on the fits of the models. Thus, the original models were used. A sensitivity analysis was performed, and used to calculate the model error. On the cleaner data sets, there was very minimal experimental noise, and thus, all resulting error was from the model. With consideration of the model error, the models fit the data very well, and the simpler model had a high model error, as expected. All these components will then be used to calculate the thermodynamic efficiency of the different materials.

14 SOLAR ENERGY↗

REDOTHERM: a thermodynamic modeling framework for redox-based thermochemical processes

Two-step thermochemical redox cycles are being developed as a potential pathway for the production of hydrogen and syngas. While there are many possible reactor and system configurations, moving oxide systems are considered promising in terms of the redox thermodynamics, due to the potential implementation of a countercurrent system that can achieve higher performance compared to other configurations. There is a lack of a robust thermodynamic modeling framework in the field, with multiple models incorporating incorrect thermodynamic assumptions that violate the second law of thermodynamics. We present in this work REDOTHERM, an open-source system model for moving oxides that incorporates the correct thermodynamic limits, as well as various options for the system auxiliary units including product separation, heat recovery, and oxygen removal. The model is agnostic to the energy source, and could be used for solar thermal or other configurations. We highlight the uses of this model, presenting some of the tradeoffs and challenges in redox-active material selection and how they affect the entire thermochemical hydrogen production process. This model could be easily adapted and used for material exploration, system/reactor design, and technoeconomic analysis.

08 HYDROGEN↗

A self-consistent thermodynamic model of metallic systems. Application for the description of gold

A self-consistent thermodynamic model of metallic system is presented. The expression for the Gibbs energy is derived, which incorporates elastic (static) energy, vibrational energy within the Debye model, and electronic part in Hartee-Fock approximation. The elastic energy is introduced by a volume-dependent anharmonic potential. From the Gibbs energy all thermodynamic quantities, as well as the equation of state, are self-consistently obtained. The model is applied for the description of bulk gold in temperature range 0 ≤ T ≲ 1300 K and external pressure up to 30 GPa. The calculated thermodynamic properties are illustrated in figures and show satisfactory agreement with experimental data. The advantages and opportunities for further development of the method are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermodynamic Model and Initial Experimental Investigation of Air Dehumidification through Electrically Charged Vapor Capturing Electrostatic Droplets

The removal of water vapor from the air to reduce relative humidity is a well known indoor environmental comfort requirement. Common dehumidification approaches require a substantial amount of energy and usually involve the cooling of atmospheric humid air below its dew point or the use of absorbent/adsorbent materials to extract water vapor out of the air. More recently, researchers investigated the effect of electrostatic forces for enhancing water vapor condensation with the goal to reduce the energy consumption associated with dehumidification. However, the studies are limited, and there is a lack of correlations that can predict the dehumidification rate. In this thesis, a broad theoretical investigation to study the electrostatically enhanced condensation processes was carried out. These processes consist of the use of highly charged particles, preferably highly charged water droplets to attract polar water vapor molecules to their surfaces and promote condensation, a phenomenon known as dielectrophoresis. The electrical charge promotes the reduction of the vapor pressure on the droplets' surface with respect to the saturated pressure predicted by the Kelvin equation on curved surfaces and, consequently, the equilibrium between evaporation and condensation is shifted towards condensation. This investigation resulted in the development of a thermodynamics model, which was able to predict an effective size range of the charged droplets for optimal dehumidification, under ideal conditions. The range resulted in about 2 to 4 m in diameter, while the electrical charge was kept to the maximum limit predicted by the Rayleigh model. A sensitivity analysis on the variation of the size and the charge of the charged droplets was also performed. In terms of dehumidification rates, when six electrospray heads, i.e. the maximum number of heads tested in the experimental campaign, were considered, the model predicted very limited rates, way lower than the target of this research, i.e. a dehumidification rate in terms of relative humidity of 5 % with an air flow rate of 5 cfm. While ways to increase this rate existed, their implementation proved difficult for this initial investigation. According to the requirements predicted by the model, the use of electrosprays appeared the most suitable solution for the production of small but highly charged droplets. The electrospray features and operational modes were studied in detail and an electrospray assembly was designed to be tested in this initial experimental investigation. For this initial investigation, an experimental system was designed and built to validate the thermodynamics model and with the goal to achieve a dehumidification rate of 5 % in terms of relative humidity with an air flow rate of 5 cfm. The experimental system consisted of a wind tunnel test apparatus, dew point sensors, thermocouples for temperature measurements, pressure sensors and other devices. The experimental system was equipped with a computerized data acquisition and storage system. The system was suitable to evaluate the air water content differential before and after the test section where the electrospray heads were installed. The air water content differential was evaluated in terms of the ∆ω/ω_1 ratio, to eliminate the dependence on the dry bulb temperature along the test apparatus. This work presented initial experimental data for electrostatically enhanced dehumidification processes. Working parameters, such as air and water flow rates, high voltage potentials and polarity, deionized water types with different electrical conductivity, were varied to find the best combination for an improved dehumidification. With the set up used and the conditions considered, it was never possible to achieve a 5 % dehumidification rate with 5 cfm. In general, the dehumidification rate was always limited and lower than 1 % for all the air flow rates considered and mainly within the uncertainty of the dew point sensors. These results confirmed the already limited predictions of the thermodynamics model, for ideal conditions and the interesting and promising results obtained in some experimental investigations available in the open literature were not achievable in this thesis. The more probable reasons were the higher air flow rates considered and the complete absence of the use of cooling power, which was mainly implemented to facilitate the vapor condensation.

Morcelli, Stefano↗

Computational Design of Eutectic Molten Salt Mixtures: What Can Thermodynamic Models Do?

In the search for efficient energy storage battery technologies, designing stable electrolytes has been a long-standing challenge. Electrolytes based on molten salt eutectics are known for their stability with minimum parasitic reactions when compared to their widely used organic counterparts. However, the operating temperatures of these molten salt electrolyte-based batteries are dictated by the melting point of the eutectic mixtures. Design and high throughput screening of low melting temperature eutectic molten salt mixtures have been hindered by the lack of computational models. In this work, we develop thermodynamic models to predict the eutectic points of several molten salt mixtures. The framework of the COSMO-SAC model is used for the predictions and is compared with experimental data and other thermodynamic approaches. Rapid thermodynamics-based approaches, as shown in this study, can accelerate the discovery of new materials, complementing experimental techniques.

Ashwin Ravichandran↗

Two stage fluid bed-plasma gasification process for solid waste valorisation: Technical review and preliminary thermodynamic modelling of sulphur emissions

Highlights: Black-Right-Pointing-Pointer We investigate sulphur during MSW gasification within a fluid bed-plasma process. Black-Right-Pointing-Pointer We review the literature on the feed, sulphur and process principles therein. Black-Right-Pointing-Pointer The need for research in this area was identified. Black-Right-Pointing-Pointer We perform thermodynamic modelling of the fluid bed stage. Black-Right-Pointing-Pointer Initial findings indicate the prominence of solid phase sulphur. - Abstract: Gasification of solid waste for energy has significant potential given an abundant feed supply and strong policy drivers. Nonetheless, significant ambiguities in the knowledge base are apparent. Consequently this study investigates sulphur mechanisms within a novel two stage fluid bed-plasma gasification process. This paper includes a detailed review of gasification and plasma fundamentals in relation to the specific process, along with insight on MSW based feedstock properties and sulphur pollutant therein. As a first step to understanding sulphur partitioning and speciation within the process, thermodynamic modelling of the fluid bed stage has been performed. Preliminary findings, supported by plant experience, indicate the prominence of solid phase sulphur species (as opposed to H{sub 2}S) - Na and K based species in particular. Work is underway to further investigate and validate this.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A thermodynamic model for C-(N-)A-S-H gel: CNASH{sub s}s. Derivation and validation

The main reaction product in Ca-rich alkali-activated cements and hybrid Portland cement (PC)-based materials is a calcium (alkali) aluminosilicate hydrate (C-(N-)A-S-H) gel. Thermodynamic models without explicit definitions of structurally-incorporated Al species have been used in numerous past studies to describe this gel, but offer limited ability to simulate the chemistry of blended PC materials and alkali-activated cements. Here, a thermodynamic model for C-(N-)A-S-H gel is derived and parameterised to describe solubility data for the CaO–(Na{sub 2}O,Al{sub 2}O{sub 3})–SiO{sub 2}–H{sub 2}O systems and alkali-activated slag (AAS) cements, and chemical composition data for C-A-S-H gels. Simulated C-(N-)A-S-H gel densities and molar volumes are consistent with the corresponding values reported for AAS cements, meaning that the model can be used to describe chemical shrinkage in these materials. Therefore, this model can provide insight into the chemistry of AAS cements at advanced ages, which is important for understanding the long-term durability of these materials.

36 MATERIALS SCIENCE↗

Thermodynamic models of the chemistry of lunar volcanic gases

Thermodynamic models and mass-balance arguments are used to constrain the chemistry of lunar volcanic gases. The results predict that lunar gases were dominated by reduced C and S gases such as CO, COS, CS2, S2. The more oxidized gases CO2 and SO2 were also important, but only in limited temperature ranges. Gases such as Cl2, CCl4, and CF4 were more abundant than HF and HCl, which were the two major H compounds in the lunar gases. Chlorides and fluorides were important species for transporting many volatile and ore-forming metals, and the implications for fractionating and concentrating metals into lunar ore-deposits merit further study.

Fegley, Bruce, Jr.↗

A molecular thermodynamic model for the stability of hepatitis B capsids

Self-assembly of capsid proteins and genome encapsidation are two critical steps in the life cycle of most plant and animal viruses. A theoretical description of such processes from a physiochemical perspective may help better understand viral replication and morphogenesis thus provide fresh insights into the experimental studies of antiviral strategies. In this work, we propose a molecular thermodynamic model for predicting the stability of Hepatitis B virus (HBV) capsids either with or without loading nucleic materials. With the key components represented by coarse-grained thermodynamic models, the theoretical predictions are in excellent agreement with experimental data for the formation free energies of empty T4 capsids over a broad range of temperature and ion concentrations. The theoretical model predicts T3/T4 dimorphism also in good agreement with the capsid formation at in vivo and in vitro conditions. In addition, we have studied the stability of the viral particles in response to physiological cellular conditions with the explicit consideration of the hydrophobic association of capsid subunits, electrostatic interactions, molecular excluded volume effects, entropy of mixing, and conformational changes of the biomolecular species. The course-grained model captures the essential features of the HBV nucleocapsid stability revealed by recent experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic modeling of MDEA(aq)-NH 3 (aq)-K 2 CO 3 (aq)-CO 2 (aq) using the Extended UNIQUAC model

Here, the development of advanced processes for carbon dioxide capture requires reliable thermodynamic models to ensure accurate process design. This work presents an optimized parameter set of the Extended UNIQUAC model for advanced mixed solvent solutions containing CO 2 -MDEA-NH 3 -K 2 CO 3 in water. The model was parameterized using vapor–liquid equilibrium, pure component saturation pressure, excess enthalpy, heat of absorption, molar heat capacity, apparent molar heat capacity, and solid–liquid equilibrium. These thermal and equilibrium properties cover temperatures between 253.6 K to 600 K and pressures up to 75.6 bar. The current model represents an extension of previous versions that were suitable for modeling aqueous NH 3 and K 2 CO 3 solutions. This parametrization accounts for molecular interactions between MDEA and these two components, which allows for the design of advanced capture processes. This paper demonstrates that the new model parameters are valid within the range of operational conditions typically found in CO 2 capture processes.

42 ENGINEERING↗

Thermodynamic Modeling of Aqueous LiCl, LiBr, LiI, and LiNO 3 Solutions

Thermodynamic models are essential to facilitate the advancement of process design, optimization, and operation of electrolyte systems. In this work, a comprehensive thermodynamic framework based on the Electrolyte Nonrandom Two-Liquid model is developed to calculate phase equilibria behavior and salt solubility of aqueous LiCl, LiBr, LiI, and LiNO 3 solutions. The model describes the non-ideality of the electrolyte solutions by using two binary interaction parameters for each electrolyte-molecule pair in the system. Each binary interaction parameter is further expressed with up to three temperature coefficients which are regressed from experimental data. To take into account the hydration of lithium ion, two separate chemistries for the dissociation of lithium salts are investigated. In the first case, the lithium ion is considered as a bare ion, Li + , while in the second case hydration of the lithium ion from Li + to Li(H 2 O) + is considered. Here, the calculated thermodynamic properties compare adequately with the experimental data for both sets of chemistries for concentrations up to saturation and temperatures from 273.15 K up to 623.15 K. Moderate to significant improvements are observed with the incorporation of the hydration chemistry for aqueous LiCl, LiBr, and LiI solutions when compared to the non-hydrated lithium ion model results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗