SEARCH · Engineering Papers

Results for “Survival rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Going Off Grid: A Comparative Study of the Lagrangian and Eulerian Perspectives of New Particle Formation Events

New particle formation and growth (NPF&G) is the process by which ultrafine particles are formed from gas-phase precursors. NPF&G is the dominant source of global aerosol number with important influences on climate. Most observations of NPF&G events are conducted at stationary sites; however, NPF&G observed from stationary sites is influenced by gradual or rapid changes in the air masses passing over the site, complicating NPF&G analysis. In this work, we use observations and a 3D aerosol model to compare aerosol size distributions at a stationary site (Southern Great Plains [SGP] observatory, Oklahoma, USA) and along Lagrangian trajectories crossing the site. The model simulates the NPF&G events reasonably well at SGP. Using the model to compare the Lagrangian and stationary perspectives, we can explain previously unanalyzable days with some evidence of NPF&G as either non-event or analyzable NPF&G days. We find most of the unanalyzable NPF&G days are due to isolated and inhomogeneous NPF&G occurring upwind of the stationary site, often in the outflow of urban regions. Finally, we compare formation rates of 3 nm particles, growth rates, and the survival probability of 3 nm particles growing to 25 nm between the stationary and Lagrangian perspectives. Because of the much larger number of analyzable days along the Lagrangian trajectories, this perspective potentially provides more robust statistics and better characterization of NPF&G event extremes. Our method for extracting chemical/physical properties along Lagrangian trajectories from 3D models can be applied to a wide range of science questions.

O’Donnell, Samuel E. [Colorado State Univ., Fort C↗

DOE OSTI2024

Tipping points emerge from weak mutualism in metacommunities

The coexistence of obligate mutualists is often precariously close to tipping points where small environmental changes can drive catastrophic shifts in species composition. For example, microbial ecosystems can collapse by the decline of a strain that provides an essential resource on which other strains cross-feed. Here, we show that tipping points, ecosystem collapse, bistability and hysteresis arise even with very weak (non-obligate) mutualism provided the population is spatially structured. Based on numeric solutions of a metacommunity model and mean-field analyses, we demonstrate that weak mutualism lowers the minimal dispersal rate necessary to avoid stochastic extinction, while species need to overcome a mean threshold density to survive in this low dispersal rate regime. Our results allow us to make numerous predictions for mutualistic metacommunities regarding tipping points, hysteresis effects, and recovery from external perturbations, and let us draw general conclusions for ecosystems even with random, not necessarily mutualistic, interactions and systems with density-dependent dispersal rather than direct mutualistic interactions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Production of Readily Compressible Dies for the Enhanced Sintering of Solids (PRESS) Preliminary Investigations

Non-oxide ceramics, which consist of predominantly carbides, borides, and nitrides, are of great interest to modern engineering because of their resistance to extreme conditions. Properties of such materials include high temperature resistance, high hardness, chemical resistance, and high fracture toughness. However, the main method for manufacturing parts of these materials is by machining cylindrical billets to the desired geometry. Not only does this produce waste, but the cost of machining is high since the part materials are of such high hardness. This method is used because these non-oxide ceramics must be sintered to high density using simultaneous heat and pressure within a hot-pressing unit. These units are inherently restricted to cylindrical geometries. A proposed way to expand the capabilities of a hot-press is by using intermediate compressible dies. This method consists of surrounding a ceramic part green body with a material that will shrink at the same rate as the part and survive the hot-pressing conditions. At the end, the compressible die material would be removed leaving a nearly net shaped hot-pressed part. In this study, graphite powder was investigated as the compressible die material with its shrinkage rate being controlled by particle size mixing. Both ceramic materials and graphite were then cast into parts and compressible dies respectively to show the feasibility of the compressible die hot-pressing method.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Solar Photovoltaics Resilient Fasteners Levelized Cost of Energy (LCOE) Tool

Solar photovoltaics (PV) module fasteners are one of the most common structural failure points on PV systems, particularly in high winds and coastal areas with ocean spray. Some fastener types have been shown to survive these conditions at higher rates than others. The fastener type, material, quantity, and placement all impact performance. Fasteners that fail less often typically have a higher upfront cost, but this investment can pay off in savings from less frequent torque audits (which reduces O&M costs), reduced system damage, and decreased system downtime. We developed an Excel-based tool to evaluate different module fasteners for a PV system - either a new or retrofit project - and compare differences in upfront and outyear costs to determine the expected life cycle costs and simple payback periods of different fastener options. The tool is site-specific, with inputs including system attributes (such as system size, location, price of power) and fastener attributes (such as design, washer type, nut type, use of locking hardware, materials, installation time, and torque audit requirements). A baseline fastener scenario can be compared to up to four proposed fastener scenarios. In addition to presenting expected life cycle cost implications of the different fastener options, the tool produces results showing the reductions in outyear costs needed to offset any initial cost premiums for more reliable fasteners across four categories: preventative O&M, avoided damage, reduced downtime, and reduced insurance premiums. These numbers can serve as decision aids for users when considering fastener options on new or existing projects. This poster will present the tool, methodology, and scenarios using example sites to highlight the tool capabilities and how it can inform different fastener decisions on different projects. Future work includes incorporating lifetime expected damage costs by embedding damage function curves that the authors are developing from field data.

14 SOLAR ENERGY↗

DOE OSTI2024

Prognostic analysis of high-flow nasal cannula therapy and non-invasive ventilation in mild to moderate hypoxemia patients and construction of a machine learning model for 48-h intubation prediction—a retrospective analysis of the MIMIC database

Background This study aims to investigate the clinical outcome between high-flow nasal cannula (HFNC) and non-invasive ventilation (NIV) therapy in mild to moderate hypoxemic patients on the first ICU day and to develop a predictive model of 48-h intubation. Methods The study included adult patients from the MIMIC III and IV databases who first initiated HFNC or NIV therapy due to mild to moderate hypoxemia (100 < PaO2/FiO2 ≤ 300). The 48-h and 30-day intubation rates were compared using cross-sectional and survival analysis. Nine machine learning and six ensemble algorithms were deployed to construct the 48-h intubation predictive models, of which the optimal model was determined by its prediction accuracy. The top 10 risk and protective factors were identified using the Shapley interpretation algorithm. Result A total of 123,042 patients were screened, of which, 673 were from the MIMIC IV database for ventilation therapy comparison (HFNC n = 363, NIV n = 310) and 48-h intubation predictive model construction (training dataset n = 471, internal validation set n = 202) and 408 were from the MIMIC III database for external validation. The NIV group had a lower intubation rate (23.1% vs. 16.1%, p = 0.001), ICU 28-day mortality (18.5% vs. 11.6%, p = 0.014), and in-hospital mortality (19.6% vs. 11.9%, p = 0.007) compared to the HFNC group. Survival analysis showed that the total and 48-h intubation rates were not significantly different. The ensemble AdaBoost decision tree model (internal and external validation set AUROC 0.878, 0.726) had the best predictive accuracy performance. The model Shapley algorithm showed Sequential Organ Failure Assessment (SOFA), acute physiology scores (APSIII), the minimum and maximum lactate value as risk factors for early failure and age, the maximum PaCO 2 and PH value, Glasgow Coma Scale (GCS), the minimum PaO 2 /FiO 2 ratio, and PaO 2 value as protective factors. Conclusion NIV was associated with lower intubation rate and ICU 28-day and in-hospital mortality. Further survival analysis reinforced that the effect of NIV on the intubation rate might partly be attributed to the other impact factors. The ensemble AdaBoost decision tree model may assist clinicians in making clinical decisions, and early organ function support to improve patients’ SOFA, APSIII, GCS, PaCO 2 , PaO 2 , PH, PaO 2 /FiO 2 ratio, and lactate values can reduce the early failure rate and improve patient prognosis.

Fu, Wei↗

DOE OSTI2025

QCD jets in a hot and dense medium: A study of shower formation time and collision kernels

With the use of , a model which considers evolving QCD jets against a fluid dynamical background, it is shown that the introduction of formation time to the parton shower after the initial hard scattering is essential for a simultaneous description of charged hadron and jet R A A . This inclusion also improves jet shape ratios at small angle and jet fragmentation function ratios of leading charged hadrons. The framework is then aimed at a study of the leading-order, next-to-leading-order, and nonperturbative collision kernels. Sizable differences in the modification of jet substructure observables, i.e., jet shape and fragmentation functions, are observed. Such differences are caused by the difference in the radiation rates of relatively soft gluons that survive in the evolution in medium. Published by the American Physical Society 2025

Modarresi-Yazdi, Rouzbeh (ORCID:0000000290377447)↗

DOE OSTI2025

Illuminating the mechanistic impacts of an Fe-quaterpyridine functionalized crystalline poly(triazine imide) semiconductor for photocatalytic CO 2 reduction

The strategy of incorporating earth-abundant catalytic centers into light-absorbing architectures is desirable from the viewpoint of low cost, low toxicity, and versatility for activating small molecules to produce solar-based fuels. Herein, we show that an Fe-quaterpyridine molecular catalyst can be anchored to a light-absorbing, crystalline, carbon nitride (PTI), to yield a molecular-catalyst/material hybrid, Fe-qpy-PTI, capable of facilitating CO 2 reduction to CO selectively (up to ∼97–98%) in aqueous solution under low-intensity light irradiation. This hybrid material leverages the ability of the Fe-qpy catalyst to bind CO 2 upon a one-electron reduction, as achieved by transfer of excited electrons from the carbon-nitride semiconductor. At a low incident power density of only 50 mW cm −2 , the catalytic activity of the hybrid material was measured across a range of catalyst loadings from 0.1–3.8 wt%, yielding CO rates of up to 596 μmol g −1 h −1 for a 3.8 wt% loading during a 3 h experiment. Over the course of 8 h, the hybrid material attained a CO evolution rate of 608 μmol g −1 h −1 and 305 turnovers for a TOF of ∼38 h −1 and an apparent quantum yield of 2.6%. Higher light intensities provided an initial increase in activity but negatively impacted photocatalytic rates with time, with an AQY of 0.6% at 150 mW cm −2 and 0.4% at 250 mW cm −2 . Transient absorption spectroscopy results showed electron survival probabilities consistent with the trends in observed product rates. Computational modeling was also used to evaluate and understand the mechanistic pathway of the high product selectivity for CO versus H 2 . These results thus help unveil key factors for leveraging the mechanistic understanding of molecular catalysts for CO 2 reduction for pairing with light absorbing semiconductors and establishing optimal conditions to attain maximal rates in aqueous solution.

McGuigan, Scott [Baylor University, Waco, TX (Unit↗

DOE OSTI2024

Growth rate as a link between microbial diversity and soil biogeochemistry

The growth rate of a microorganism is a simple yet profound way to quantify its impact on the world. The absolute growth rate of a microbial population reflects rates of resource assimilation, biomass production, and element transformation, some of the many ways that organisms affect Earth’s ecosystems and climate. Microbial fitness in the environment depends on the ability to reproduce quickly when conditions are favorable and adopt a survival physiology when conditions worsen, which cells coordinate by adjusting their relative growth rate. At the population level, relative growth rate is a sensitive metric of fitness, linking survival and reproduction to the ecology and evolution of populations. Techniques combining ‘omics and stable isotope probing enable sensitive measurements of growth rates of microbial assemblages and individual taxa in soil. Microbial ecologists can explore how the growth rates of taxa with known traits and evolutionary histories respond to changes in resource availability, environmental conditions, and interactions with other organisms. We anticipate that quantitative and scalable data on the growth rates of soil microorganisms, coupled with measurements of biogeochemical fluxes, will allow scientists to test and refine ecological theory and advance process-based models of carbon flux, nutrient uptake, and ecosystem productivity. Finally, measurements of in situ microbial growth rates provide insights into the ecology of populations and can be used to quantitatively link microbial diversity to soil biogeochemistry.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Upland forest retreat lags behind sea‐level rise in the mid‐Atlantic coast

Abstract Ghost forests consisting of dead trees adjacent to marshes are striking indicators of climate change, and marsh migration into retreating coastal forests is a primary mechanism for marsh survival in the face of global sea‐level rise. Models of coastal transgression typically assume inundation of a static topography and instantaneous conversion of forest to marsh with rising seas. In contrast, here we use four decades of satellite observations to show that many low‐elevation forests along the US mid‐Atlantic coast have survived despite undergoing relative sea‐level rise rates (RSLRR) that are among the fastest on Earth. Lateral forest retreat rates were strongly mediated by topography and seawater salinity, but not directly explained by spatial variability in RSLRR, climate, or disturbance. The elevation of coastal tree lines shifted upslope at rates correlated with, but far less than, contemporary RSLRR. Together, these findings suggest a multi‐decadal lag between RSLRR and land conversion that implies coastal ecosystem resistance. Predictions based on instantaneous conversion of uplands to wetlands may therefore overestimate future land conversion in ways that challenge the timing of greenhouse gas fluxes and marsh creation, but also imply that the full effects of historical sea‐level rise have yet to be realized.

Biodiversity & Conservation↗

DOE OSTI2025

Fate of Listeria monocytogenes Serotypes on Frozen Mixed Vegetables During Consumer‐Simulated Thawing and Storage

ABSTRACT Recent outbreaks and recalls associated with frozen vegetables in the United States and Europe have been linked to Listeria monocytogenes . This study aims to understand the extent to which frozen vegetables support the growth of L. monocytogenes once thawed and held at different temperatures. Six L. monocytogenes strains, two of each from serotypes 1/2a, 1/2b, and 4b, were individually inoculated onto frozen vegetables and stored at −18°C for 7 days. After 7 days, the vegetables were thawed and stored at 5°C or 10°C for up to 14 days or at 25°C for up to 7 days. L. monocytogenes was enumerated from the thawed vegetables throughout the storage period. Population data were fitted to the primary Baranyi model to estimate growth rates and lag phase durations; the secondary Ratkowsky square root model was used to model the relationship of the growth rates with storage temperature. Five of the L. monocytogenes strains survived and grew on the thawed vegetables (population increases of > 1 log CFU/g) stored at 5°C, and all six of the strains proliferated at 10°C and 25°C (population increases of > 3 log CFU/g after 14 days and > 4 log CFU/g after 7 days, respectively). A secondary model was successfully generated based on the growth rates of the six L. monocytogenes strains on the thawed vegetables ( r 2 = 0.8888, RMSE = 0.2057). Results from this study fill a data gap associated with L. monocytogenes survival on thawed vegetables and can be used to determine safe handling and storage practices for these products to protect public health.

Salazar, Joelle K. [Division of Food Processing Sc↗

DOE OSTI2025

Emigration and Survival of Hatchery‐Reared Coho Salmon Released as Parr and Smolts in a Reintroduction Program

ABSTRACT Releasing fish at varied life stages is an underutilized hatchery‐rearing practice. Columbia River Treaty tribes have been working to reintroduce extirpated Coho Salmon to historical habitats in upper watersheds. This effort has included the release of hatchery‐origin fish at both the parr and smolt life stages in the Yakima River Basin (Washington State USA), a tributary to the Columbia River. We evaluated releases of parr and smolts tagged with passive integrated transponders over 11 brood years. We assessed emigration timing, fish survival, and age‐at‐return for the two release groups. Emigrating juveniles released as smolts had higher survival and arrived downstream earlier than fish released as parr. Survival from release locations to adult return did not significantly differ for the two release groups. However, we observed a difference in apparent marine survival as fish released as parr had mean juvenile‐to‐adult return rates greater than fish released as smolts. Parr releases also tended to return at older age than smolt releases. Our results indicate that implementing practices to reduce homogenization of hatchery releases may produce survival and diversity benefits as fish mature to later life stages. Given the rapid ecosystem changes Pacific Salmon are experiencing throughout their life cycles, practices such as this may have increasing utility and import.

Bosch, William J. [Yakama Nation Fisheries Toppeni↗

DOE OSTI2026

3D-Bioprinted Marine Bacteria for the Degradation of Polyhydroxybutyrate Bioplastics

The severe, long-lasting harm caused by plastic pollution to marine ecosystems and coastal economies has led to the development of biodegradable plastics; however, their limited decomposition in marine environments remains a challenge. Here, technologies are presented for creating 3D-bioprinted living materials as a proof of concept for bioplastic degradation, with specific use in marine environments. The approach developed here integrates the halotolerant bioplastic-degrading bacterium Bacillus sp. NRRL B- 14911 into alginate-based bio-ink to print an engineered living material (ELM) termed a “bio-sticker.” Quantification of bacteria viability reveals that bioprinted marine bacteria survive within biostickers for more than 3 weeks. The rate at which the biostickers degrade the bioplastic polyhydroxybutyrate (PHB) can be tuned by altering biosticker biomass concentration, bioplastic concentration, or incubation temperature. Biostickers that are transferred to a different PHB sample still retain high biodegradation activity, demonstrating their reusability. Strain sweep oscillatory tests demonstrate that the biostickers display predominantly viscoelastic behavior. Monotonic tensile tests indicate that the elastic modulus and the adhesion of the biostickers are not negatively impacted by bacteria growth or incubation temperature. This work paves the way for the development of ELMs to facilitate the inclusion of bioplastics within the blue economy, promoting the emergence of more sustainable and ecofriendly materials.

3D bioprinting↗

DOE OSTI2023

Tracking fungal species-level responses in soil environments exposed to long-term warming and associated drying

Climate change is affecting fungal communities and their function in terrestrial ecosystems. Despite making progress in the understanding of how the fungal community responds to global change drivers in natural ecosystems, little is known on how fungi respond at the species level. Understanding how fungal species respond to global change drivers, such as warming, is critical, as it could reveal adaptation pathways to help us to better understand ecosystem functioning in response to global change. Here, we present a model study to track species-level responses of fungi to warming—and associated drying—in a decade-long global change field experiment; we focused on two free-living saprotrophic fungi which were found in high abundance in our site, Mortierella and Penicillium. Using microbiological isolation techniques, combined with whole genome sequencing of fungal isolates, and community level metatranscriptomics, we investigated transcription-level differences of functional categories and specific genes involved in catabolic processes, cell homeostasis, cell morphogenesis, DNA regulation and organization, and protein biosynthesis. We found that transcription-level responses were mostly species-specific but that under warming, both fungi consistently invested in the transcription of critical genes involved in catabolic processes, cell morphogenesis, and protein biosynthesis, likely allowing them to withstand a decade of chronic stress. Overall, our work supports the idea that fungi that invest in maintaining their catabolic rates and processes while growing and protecting their cells may survive under global climate change.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Evaluation of survival estimates generated from tracking downstream migrating juvenile sea lamprey ( Petromyzon marinus ) with a miniature acoustic telemetry tag

Fish that undertake juvenile migration pass through habitats that vary in mortality risk. The ability to identify regions of persistently low survival would improve fishery management. We conducted a field study combined with predictive modeling of survival in downstream migrating juvenile sea lamprey using a new micro-acoustic telemetry tag designed for implantation into small, slender-bodied fishes. Detection data were collected from eight receivers placed across a coastal riverine–wetland–lake complex. Juvenile sea lamprey initiated downstream movement near nautical twilight, stopped frequently, and were more likely to move during high river discharge. Estimated survival was highest in the riverine reach, declined through the river–wetland complex, and dropped precipitously in the drowned rivermouth lake. However, the high transmission rate and resulting short battery life of the microtransmitters (as configured) likely resulted in missed detections in the lower reaches. Simulation analyses suggested survival estimation could be improved by increasing the number of tagged lamprey and staggering release locations. We offer practical recommendations for the use of this new transmitter in field studies with small anguilliform fish.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Labile assembly of a tardigrade protein induces biostasis

Abstract Tardigrades are microscopic animals that survive desiccation by inducing biostasis. To survive drying tardigrades rely on intrinsically disordered CAHS proteins, which also function to prevent perturbations induced by drying in vitro and in heterologous systems. CAHS proteins have been shown to form gels both in vitro and in vivo, which has been speculated to be linked to their protective capacity. However, the sequence features and mechanisms underlying gel formation and the necessity of gelation for protection have not been demonstrated. Here we report a mechanism of fibrillization and gelation for CAHS D similar to that of intermediate filament assembly. We show that in vitro, gelation restricts molecular motion, immobilizing and protecting labile material from the harmful effects of drying. In vivo, we observe that CAHS D forms fibrillar networks during osmotic stress. Fibrillar networking of CAHS D improves survival of osmotically shocked cells. We observe two emergent properties associated with fibrillization; (i) prevention of cell volume change and (ii) reduction of metabolic activity during osmotic shock. We find that there is no significant correlation between maintenance of cell volume and survival, while there is a significant correlation between reduced metabolism and survival. Importantly, CAHS D's fibrillar network formation is reversible and metabolic rates return to control levels after CAHS fibers are resolved. This work provides insights into how tardigrades induce reversible biostasis through the self‐assembly of labile CAHS gels.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Electrothermal mineralization of per- and polyfluoroalkyl substances for soil remediation

Abstract Per- and polyfluoroalkyl substances (PFAS) are persistent and bioaccumulative pollutants that can easily accumulate in soil, posing a threat to environment and human health. Current PFAS degradation processes often suffer from low efficiency, high energy and water consumption, or lack of generality. Here, we develop a rapid electrothermal mineralization (REM) process to remediate PFAS-contaminated soil. With environmentally compatible biochar as the conductive additive, the soil temperature increases to >1000 °C within seconds by current pulse input, converting PFAS to calcium fluoride with inherent calcium compounds in soil. This process is applicable for remediating various PFAS contaminants in soil, with high removal efficiencies ( >99%) and mineralization ratios ( >90%). While retaining soil particle size, composition, water infiltration rate, and cation exchange capacity, REM facilitates an increase of exchangeable nutrient supply and arthropod survival in soil, rendering it superior to the time-consuming calcination approach that severely degrades soil properties. REM is scaled up to remediate soil at two kilograms per batch and promising for large-scale, on-site soil remediation. Life-cycle assessment and techno-economic analysis demonstrate REM as an environmentally friendly and economic process, with a significant reduction of energy consumption, greenhouse gas emission, water consumption, and operation cost, when compared to existing soil remediation practices.

Science & Technology - Other Topics↗

DOE OSTI2024

Multizone Modeling of Black Hole Accretion and Feedback in 3D GRMHD: Bridging Vast Spatial and Temporal Scales

Simulating accretion and feedback from the horizon scale of supermassive black holes (SMBHs) out to galactic scales is challenging because of the vast range of scales involved. Elaborating on H. Cho et al., we describe and test a "multizone" technique, which is designed to tackle this difficult problem in three-dimensional general relativistic magnetohydrodynamic (GRMHD) simulations. While short-timescale variability should be interpreted with caution, the method is demonstrated to be well-suited for finding dynamical steady states over a wide dynamic range. We simulate accretion on a nonspinning SMBH ($a\ast$ = 0) using initial conditions and the external galactic potential from a large-scale galaxy simulation and achieve a steady state over eight decades in radius. As found in H. Cho et al., the density scales with radius as ρ ∝ r –1 inside the Bondi radius R B , which is located at R B = 2 × 10 5 r g (≈60 pc for M87), where r g is the gravitational radius of the SMBH; the plasma-β is ~ unity, indicating an extended magnetically arrested state; the mass accretion rate $\dot{M}$ is ≈1% of the analytical Bondi accretion rate ${\dot{M}}_{{\rm{B}}};$ and there is continuous energy feedback out to ≈100R B (or beyond > kpc) at a rate $\approx 0.02\dot{M}{c}^{2}$. Surprisingly, no ordered rotation in the external medium survives as the magnetized gas flows to smaller radii, and the final steady solution is very similar to when the exterior has no rotation. Using the multizone method, we simulate GRMHD accretion over a wide range of Bondi radii, R B ~ 10 2 –10 7 r g , and find that $\dot{M}/{\dot{M}}_{{B}}\approx {({R}_{{B}}/6\,{r}_{g})}^{-0.5}$.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Impact of developmental methylmercury exposure on avian embryonic development, hatchling growth, and survival

Abstract Methylmercury (MeHg) is a globally ubiquitous and persistent environmental toxicant that negatively affects animal behavior, health, and reproduction. In birds, MeHg is transferred from female to egg, contaminating embryos during sensitive stages of early embryonic development and growth. This toxic exposure in the prenatal environment not only induces mortality but also possible lasting impacts on physiology, health, and survival, even once hatched. The purpose of our study was to further elucidate the negative effects of MeHg exposure during avian embryonic development and explore how such exposure can impact offspring development, growth, and survival, both in ovo and posthatch. To assess this, we experimentally dosed fertile mallard and wood duck eggs with MeHg II chloride and reared developing embryos and ducklings to various endpoints. We found that embryos not only readily accumulated MeHg throughout incubation, but they also displayed varying dose-dependent disparities in body mass and morphometrics, with control individuals being larger during early and late embryonic stages of development (p < 0.05). Furthermore, hatched offspring exposed to MeHg exhibited increasingly slower growth rates between 7 to 10 and 10 to 15 days posthatch (p < 0.05), and were found to have lower survival probabilities both under controlled laboratory conditions (p < 0.005), and in the natural environment (p < 0.05). Our findings on the detrimental effects of MeHg on avian embryos and hatchlings emphasize the need for more proactive means of environmental protection and remediation to protect vulnerable avian populations and the ecosystems they inhabit.

Leaphart, James C.↗