Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface step”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Atomic Force Microscope Observation of Growth and Defects on As-Grown (111) 3C-SiC Mesa Surfaces

This paper presents experimental atomic force microscope (AFM) observations of the surface morphology of as-grown (111) silicon-face 3C-SiC mesa heterofilms. Wide variations in 3C surface step structure are observed as a function of film growth conditions and film defect content. The vast majority of as-grown 3C-SiC surfaces consisted of trains of single bilayer height (0.25 nm) steps. Macrostep formation (i.e., step-bunching) was rarely observed, and then only on mesa heterofilms with extended crystal defects. As supersaturation is lowered by decreasing precursor concentration, terrace nucleation on the top (111) surface becomes suppressed, sometimes enabling the formation of thin 3C-SiC film surfaces completely free of steps. For thicker films, propagation of steps inward from mesa edges is sometimes observed, suggesting that enlarging 3C mesa sidewall facets begin to play an increasingly important role in film growth. The AFM observation of stacking faults (SF's) and 0.25 nm Burgers vector screw component growth spirals on the as-grown surface of defective 3C films is reported.

Neudeck, Philip G.↗
DOE OSTI2025

The importance of shear on the collective charge transport in CDWs revealed by an XFEL source

Charge transport in materials has an impact on a wide range of devices based on semiconductor, battery, or superconductor technology. Charge transport in sliding charge density waves (CDW) differs from all others in that the atomic lattice is directly involved in the transport process. To obtain an overall picture of the structural changes associated to the collective transport, the large coherent x-ray beam generated by an x-ray free-electron laser (XFEL) source was used. The CDW phase can be retrieved over the entire sample from diffracted intensities using a genetic algorithm. For currents below threshold, increasing shear deformation is observed in the central part of the sample while longitudinal deformation appears above threshold when shear relaxes. Shear thus precedes longitudinal deformation, with relaxation of one leading to the appearance of the other. Moreover, strain accumulates on surface steps in the sliding regime, demonstrating the strong pinning character of these surface discontinuities. The sliding process of nanometric CDW involves macroscopic sample dimensions.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Incompressible flow in stepped labyrinth seals

A steped labyrinth seal was experimentally investigated to determine the effects of pressure ratio, shaft speed, number of teeth, and tooth/step location upon the leakage through the seal for incompressible flow. The dependence of the flow coefficient upon the number of throttles and pressure ratio are similar to those for straight-through labyrinth seals. It can be noted that the axial location of the throttle with respect to the step had a special effect upon the flow coefficient. That is, the dependency of the flow coefficient upon rotation rate and the number of throttles changes with axial location. It was found that the minimum flow coefficient was obtained when the seal teeth were centered on the step surface. Axial pressure distribution measurements show that when the teeth are centered on the step, the pressure drop from cavity to cavity is almost uniform. It is speculated that the obtaining of this uniform pressure gradient is the cause for the enhanced performance of the stepped labyrinth seal when operated in that configuration.

Morrison, G. L.↗
NASA NTRS1987

Simulation studies for surfaces and materials strength

Three different investigations based on computer simulations were carried out. Simulation calculations were performed using model potentials with two- and three-body interactions which were represented by the Mie and the Axilrod-Teller potentials, respectively. In the first part, to analyze stability criteria for simple crystals, a parametrical investigation was performed and stability regions for five different crystalline structures were determined with respect to potential energy parameters. To simulate some of the basic surface processes such as diffusion and nucleation, in the second and third parts, silicon surfaces were considered as a specific example. In these studies diffusion of adatoms on stepped surfaces were simulated and energetics associated with the formation of kink sites were calculated.

Halicioglu, Timur↗
NASA NTRS2003

Step Bunching and Solution Flow

Imagine a sequence of equidistant steps parallel to one another on a crystal face growing from solution. Steps may be one or part of a lattice spacing high. With such ideal morphology, the most perfect material is expected to be produced. Sometimes this happens. Much more often, however, steps form bunches, acquire wavy shapes and interlace. With time, these spontaneous perturbations may be increased in amplitude, i.e. the stepped surface becomes morphologically unstable. Interferometric studies of Y.G. Kuznetsov, L.N. Rashkovich, P.G. Vekilov and N.A. Booth and the author demonstrated that the step bunching depends at least on direction and rate of solution flow over the interface, supersaturation and presence of impurities. In particular, if solution and step flow are parallel to one another, the steps convene into bunches. If these flows are antiparallel, the bunches disappear. As the step train propagates, the overall bunch height often increases infinitely. However, we have found recently that if the flow rate is large enough, (approximately 1 meter per second), the bunch height may be limited. All these phenomena come from interaction between steps. The interaction mechanisms are still not fully understood. I plan to overview major approaches to the still unresolved problem on how these dissipative structures on growing crystal face appear and evolve.

Chernov, A. A.↗
DOE OSTI2024

Surface phase diagrams from nested sampling

From nested sampling, we compute the partition function and, from that, the phase diagram of gas adsorbates, including their anharmonic and configurational degrees of freedom, on flat and stepped surfaces of the Lennard-Jones solid.

Chemistry↗
NASA NTRS2002

Enlargement of Step-Free SiC Surfaces by Homoepitaxial Web-Growth of Thin SiC Cantilevers

Lateral homoepitaxial growth of thin cantilevers emanating from mesa patterns that were reactive ion etched into on-axis commercial SiC substrates prior to growth is reported. The thin cantilevers form after pure stepflow growth removes almost all atomic steps from the top surface of a mesa, after which additional adatoms collected by the large step-free surface migrate to the mesa sidewall where they rapidly incorporate into the crystal near the top of the mesa sidewall. The lateral propagation of the step-free cantilevered surface is significantly affected by pregrowth mesa shape and orientation, with the highest lateral expansion rates observed at the inside concave comers of V-shaped pregrowth mesas with arms lengthwise oriented along the {1100} direction. Complete spanning of the interiors of V's and other mesa shapes with concave comers by webbed cantilevers was accomplished. Optical microscopy, synchrotron white beam x-ray topography and atomic force microscopy analysis of webbed regions formed over a micropipe and closed-core screw dislocations show that c-axis propagation of these defects is terminated by the webbing. Despite the nonoptimized process employed in this initial study, webbed surfaces as large as 1.4 x 10(exp -3) square centimeters, more than four times the pregrowth mesa area, were grown. However, the largest webbed surfaces were not completely free of bilayer steps, due to unintentional growth of 3C-SiC that occurred in the nonoptimized process. Further process optimization should enable larger step-free webs to be realized.

Neudeck, Philip G.↗
NASA NTRS2018

Solar Surfing: Final Report on a Phase I NASA Innovative Advanced Concepts Study

The Sun sustains life on Earth and NASA has made its study one of the four pillars of the Science Mission Directorate. A specific area of study, the coronal heating problem, has been of significant concern for nearly 80years; namely how does the 5800 K surface of the Sun heat the nearby corona to over 1,000,000 K. Differing theories have been proposed to explain this process, but verification by actual measurement would not only resolve this issue, it would provide close-up measurements of the Sun never before obtained. However, this requires the development of a solar shield that can protect a satellite located less than 10,000 km from the Sun's surface. Steps towards that capability are the goal of this NIAC project. The current state-of-the-art in solar shielding is best shown by the upcoming Parker Solar Probe Mission, so the approach taken by that satellite is discussed and used as a starting point; allowing a distance of 9.5 solar radii from the Sun's center to be reached. It is then shown that state-of-the-art solar reflectors do not improve this performance. Next, we review the use of pressed powder as a better solar reflector and show that there is some improvement, but not sufficient to reach the Sun's surface. We spend some time on this architecture because the Parker Solar Probe has a thin scattering layer on its solar shield and it is important to discuss the advantages and disadvantages of this feature.

solar surfing↗
DOE OSTI2026

Gold Nanorod-Affibody Conjugates Mediate Cancer Photothermal Therapy under 808 nm LED Irradiation

Current HER2-targeted therapies including monoclonal antibodies, antibody-drug conjugates (ADCs) and small-molecule tyrosine kinase inhibitors face limitations such as hepatotoxicity, development of treatment resistance, and subsequent disease relapse. To overcome these challenges, this study combines the specificity of a HER2-targeting affibody molecule (Z HER2:2891 -Cys) with the photothermal properties of gold nanorods (AuNRs), forming bioconjugates (Affi–AuNRs) for selective treatment of HER2-positive cancer cells. Affi–AuNRs were fabricated via a two-step surface modification: (i) ligand exchange to displace cetyltrimethylammonium bromide (CTAB) with poly(ethylene glycol) methyl ether thiol (mPEG-SH), and (ii) covalent attachment of the affibody molecule via Au–S chemistry. Affi-AuNRs exhibited a photothermal conversion efficiency of 64 ± 5%, comparable to that of CTAB-stabilized AuNRs (59 ± 4%). Confocal microscopy confirmed that Affi-AuNRs are selectively internalized by HER2-positive SKOV-3 cells, with minimal uptake by HEK293T cells, which have low HER2 expression. Upon exposure to 808 nm near-infrared (NIR) LED irradiation (408 mW cm –2 , 15 min), Affi-AuNRs significantly reduced SKOV-3 cell viability by 85 ± 9% (p < 0.001) relative to untreated controls with no detectable cytotoxicity in HEK293T cells. These results demonstrate HER2-selective photothermal cytotoxicity mediated by Affi–AuNRs under defined 808 nm LED irradiation conditions, supporting their continued development as nanotheranostic tools that integrate affibody-mediated specificity with plasmonic heating.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Elimination of remnant phases in low-temperature growth of wurtzite ScAlN by molecular-beam epitaxy

Growth of wurtzite ScxAl1−xN (x < 0.23) by plasma-assisted molecular-beam epitaxy on cplane GaN at high temperatures significantly alters the extracted lattice constants of the material due to defects likely associated with remnant phases. In contrast, ScAlN grown below a composition-dependent threshold temperature exhibits uniform alloy distribution, reduced defect density, and atomic-step surface morphology. The c-plane lattice constant of this low-temperature ScAlN varies with composition as expected from previous theoretical calculations and can be used to reliably estimate alloy composition. Moreover, lattice-matched Sc0.18Al0.82N/GaN multiquantum wells grown under these conditions display strong and narrow near-infrared intersubband absorption lines that confirm advantageous optical and electronic properties.

Dzuba, Brandon↗
NASA NTRS1979

Efficient solar cells by space processing

Thin films of electron beam evaporated silicon were deposited on molybdenum, tantalum, tungsten and molybdenum disilicide under ultrahigh vacuum conditions. Mass spectra from a quadrapole residual gas analyzer were used to determine the partial pressure of 13 residual gases during each processing step. Surface contamination and interdiffusion were monitored by in situ Auger electron spectrometry. The presence of phosphorus in the silicon was responsible for attaining elevated temperatures with silicide formations. Heteroepitaxial silicon growth was sensitive to the presence of oxygen during deposition, the rate and length of deposition as well as the substrate orientation.

Schmidt, F. A.↗
NASA NTRS1982

3-D supersonic combustion experiments with hydrogen in V-trough

Both supersonic blowdown and free jet wind tunnels were used in oil flow visualization and hydrogen gas burning tests of 60- and 90-deg V-shaped trough combustion characteristics. Oil dots showed that mass outflow from the reattachment region at the bottom of the V-trough dominated flow behavior, and occupied the trough's entire length and 10% of its cross-section. Intermingled vortex pairs were also found to superimpose themselves upon the outflow, and hydrogen burning within troughs reduced missile base drag by 25%. The troughs were aligned so that their long dimensions were parallel to the airflow, and the two top edges of the V section were mounted flush with respect to the upstream flat surfaces. Step heights tested ranged from 3.4 mm to 6.25 cm.

Friedberg, R. A.↗
NASA NTRS1983

Reaction of cobalt in SO2 atmospheric at elevated temperatures

The reaction rate of cobalt in SO2 argon environments was measured at 650 C, 700 C, 750 C and 800 C. Product scales consist primarily of an interconnected sulfide phase in an oxide matrix. At 700 C to 800 C a thin sulfide layer adjacent to the metal is also observed. At all temperatures, the rapid diffusion of cobalt outward through the interconnected sulfide appears to be important. At 650 C, the reaction rate slows dramatically after five minutes due to a change in the distribution of these sulfides. At 700 C and 750 C the reaction is primarily diffusion controlled values of diffusivity of cobalt (CoS) calculated from this work show favorable agreement with values of diffusivity of cobalt (CoS) calculated from previous sulfidation work. At 800 C, a surface step becomes rate limiting.

Jacobson, N. S.↗
NASA NTRS1984

Reaction of cobalt in SO2 atmospheres at elevated temperatures

The reaction rate of cobalt in SO2 argon environments was measured at 650 C, 700 C, 750 C and 800 C. Product scales consist primarily of an interconnected sulfide phase in an oxide matrix. At 700 C to 800 C, a thin sulfide layer adjacent to the metal is also observed. At all temperatures, the rapid diffusion of cobalt outward through the interconnected sulfide appears to be important. At 650 C, the reaction rate slows dramatically after five minutes due to a change in the distribution of these sulfides. At 700 C and 750 C, the reaction is primarily diffusion controlled; values of diffusivity of cobalt (CoS) calculated from this work show favorable agreement with values of diffusivity of cobalt (CoS) calculated from previous sulfidation work. At 800 C, a surface step becomes rate limiting. Previously announced in STAR as N83-35104

Jacobson, N. S.↗
NASA NTRS1988

Design of low Reynolds number airfoils. II

Low Reynolds number airfoils were designed for high lift-to-drag ratios. Design considerations of low Re-airfoils are discussed and design examples are presented. It is shown that the performance of advance low Reynolds airfoils critically depends on proper laminar separation and transition control for the minimum profile drag coefficient with minimum turbulator device drag. This transition control close to the laminar separation is possible by enforcing transition on the upper surface either directly by means of spanwise rows of three-dimensional roughness elements, bleed or suction holes, or indirectly by means of destabilizing the upper surface boundary layer by means of backward facing surface steps, two-dimensional or zig-zag tapes or weak boundary layer blowing. Pneumatic turbulators are found to be advantageous because they can be adjusted to different external flow conditions better than mechanical ones.

Pfenninger, W.↗
NASA NTRS1993

Combined LAURA-UPS hypersonic solution procedure

A combined solution procedure for hypersonic flowfields around blunted slender bodies was implemented using a thin-layer Navier-Stokes code (LAURA) in the nose region and a parabolized Navier-Stokes code (UPS) on the after body region. Perfect gas, equilibrium air, and non-equilibrium air solutions to sharp cones and a sharp wedge were obtained using UPS alone as a preliminary step. Surface heating rates are presented for two slender bodies with blunted noses, having used LAURA to provide a starting solution to UPS downstream of the sonic line. These are an 8 deg sphere-cone in Mach 5, perfect gas, laminar flow at 0 and 4 deg angles of attack and the Reentry F body at Mach 20, 80,000 ft equilibrium gas conditions for 0 and 0.14 deg angles of attack. The results indicate that this procedure is a timely and accurate method for obtaining aerothermodynamic predictions on slender hypersonic vehicles.

Wood, William A.↗
NASA NTRS1996

Effect of Tilt Angle on the Morphology of SiC Epitaxial Films Grown on Vicinal (0001) SiC Substrates

In this study of 4H-SiC and 6H-SiC epitaxial films we found that film morphology was strongly dependent on the tilt angle of the substrate. Large surface steps (up to 25 nm high) due to step bunching were more prevalent at smaller tilt angles. Also, 4H films were more susceptible than 6H to 3C-SiC inclusions during growth. The lateral growth of steps from screw dislocations in low-tilt-angle substrates demonstrated that step bunching on the atomic scale was anisotropic with respect to growth direction for both 4H-SiC and 6H-SiC. A model explaining this behavior is presented. We observed and directly measured the Burgers vector of a 'super' screw dislocation in a 6H-SiC epilayer.

Powell, J. A.↗