Engineering PapersSearch

SEARCH · Engineering Papers

Results for “Surface activation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Surface activation of Concorde by Be-7

Activation analysis of two airframe components from the Concorde aircraft has identified the presence of Be-7, a nuclide found by other investigators that was deposited on the forward edge of the Long Duration Exposure Facility (LDEF) structure. The results of the Concorde analysis indicate that this phenomenon is very much a surface effect, and that the areal densities of the Be-7 are comparable to those found for LDEF. The collection of Be-7 by the aircraft must be greater than in the case of LDEF (since duration for which Concorde is accumulating the nuclide is shorter) and is of the order of 1.2 to 41 nuclei/sq cm(-)s(exp -1) depending upon assumptions made regarding the altitude at which collection becomes appreciable, and the efficiency of the process which removes the radionuclide.

Truscott, P. R.

Orbital Drag Near Small Bodies Due to Lofted Fines from Surface Activity

Recent exploratory missions have revealed that small bodies are more granular and dusty than previously expected. As a result of landings, mining, impacts, or other natural phenomena, bodies with negligible atmospheres such as moons and asteroids may experience an exospheric environment abundant in lofted fines. Significant quantities of these may interfere with the nominal trajectories of spacecraft in low orbits. This paper applies data collected from remote sensor and direct sample collection to approximate the density of atmospheric fines in three environments: high-velocity lunar fines generated during landings, the coma of active comets, and cryovolcanic plumes from the Saturnian moon Enceladus. It also investigates the threshold of activity that would induce concerns about a spacecraft's nominal mission. Coupled motion of spacecraft navigation and control is expressed in SE(3).

Fines

Surface activation of Concorde by Be-7

Activation analysis of two airframe parts from Concorde aircraft has identified the presence of Be-7, a nuclide which was found by other investigators to have been collected on the forward edge of the Long Duration Exposure Facility (LDEF) structure. The results of the Concorde analysis indicate that this phenomenon is very much a surface effect, and that the areal densities of the Be-7 are comparable to those found for LDEF. The collection of Be-7 by the aircraft must be greater than in the case of LDEF (since the duration for which Concorde is accumulating the nuclide is shorter) and is of the order of 1.9 to 40 nuclei sq cm/s, depending upon assumptions made regarding the efficiency of the process which removes the radionuclide.

Truscott, P. R.

Surface activities on the first piloted Mars mission

The objectives of the first piloted Mars mission, in addition to safe Mars landing and return to earth for the crew, would encompass a demonstration of human working capabilities in the Martian environment, the exploration of the landing site, and the establishment of that planet's potential for the support of permanent human habitation. An evaluation is presently made of constraints on Martian service activities, mission risk considerations, and the three mission profiles that can be envisioned for total durations of 14, 21, and 35 months.

Duke, Michael B.

Dual-Active-Surface Miniature Plug-Type Heat-Flux Gauges

Improved miniature plug-type heat-flux gauges developed for determining fluxes of heat through surfaces on both sides of heat-transfer walls. Walls are those of heat exchangers, engine housings, furnaces, chemical reactors, or any of variety of other structures in which fluxes of heat important quantities one seeks to measure.

Liebert, Curt H.

A Brief Summary of the Geomorphic Evidence for an Active Surface Hydrologic Cycle in Mars' Past

Because Mars is just over half the Earth's diameter (about 6800 km), it does not exhibit global tectonism on a scale comparable to Earth and Venus. But because it is still a large body compared to Mercury and the moon, it has had an atmosphere and climate over the history of the solar system. This is why Mars has been able to retain surfaces produced both through volcanic and climatic processes that are intermediate in age between volcanic surfaces on the moon and Mercury and both types of surfaces on Venus and Earth. For the purposes of this discussion, this has important implications about the origins and evolution of topographic depressions that potentially may have contained lakes. Tectonism is probably the most important process on Earth for producing closed depressions on the continents, and is clearly responsible for maintenance of the ocean basins through geologic time. This is probably also true for depressions in the highland terrains and lowland plains of Venus. On Mars, however, tectonism appears limited to relatively small amounts of regional extension, compression, and vertical motion largely due to crustal loading of the two major volcanic provinces - Tharsis and Elysium Impact craters and large impact basins (including all or parts of the northern plains) are clearly more important sites for potential lake basins on Mars, though they were likely more important on Earth, and Venus as well, during the period of heavy meteorite bombardment throughout the solar system prior to 3.5 Ga. Comparisons of the relative importance of other formative processes on Mars with those on Earth are less obvious, and some may be quite speculative, since our understanding of the early Martian environment is still rather limited. Additional information is contained in the original extended abstract.

Parker, T. J.

Mapping the Potential for Eolian Surface Activity in Grasslands of the High Plains using Landsat Images

There are over 100,000 square kilometers of eolian sand dunes and sand sheets in the High Plains of the central United States. These land-forms may be unstable and may reactivate again as a result of land-use, climate change, or natural climatic variability. The main goal of this thesis was to develop a model that could be used to map an estimate of future dune activity. Multi-temporal calibrated Landsats 5 Thematic Mapper (TM) and 7 Enhanced Thematic Map per Plus (ETM+) NDVI imagery were used in conjunction with the CENTURY vegetation model to correlate vegetation cover to climatic variability. This allows the creation of a predicted vegetation map which, combined with current wind and soil data, was used to create a potential sand transport map for range land in the High Plains under drought conditions.

Gutmann, Ethan Dain

Lunar Surface Reference Missions: A Description of Human and Robotic Surface Activities

Most medical equipment to the International Space Station (ISS) is manisfested as part of the U.S. or the Russian medical hardware systems. However, certain medical hardware is also available as part of the Human Research Facility. The HRF and the JSC Medical Operations Branch established a Memorandum of Agreement for joint use of certain medical hardware, including the HRF ultrasound system, the only diagnostic imaging device currently manifested to fly on ISS. The outcome of a medical contingency may be changed drastically, or an unnecessary evacuation may be prevented, if clinical decisions are supported by timely and objective diagnostic information. In many higher-probability medical scenarios, diagnostic ultrasound is a first-choice modality or provides significant diagnostic information. Accordingly, the Clinical Care Capability Development Project is evaluating the HRF ultrasound system for its utility in relevant clinical siruations on board ISS. For effective management of these ultrasound-supported ISS medical scenarios, the resulting data should be available for viewing and interpretation on the ground, and bidirectional voice communication should be readily available to allow ground experts (sonographers, physicians) to provide guidance to the Crew Medical Officer. It may also be vitally important to have the capability of real-time guidance via video uplink to the CMO-opertor during an exam to facilitate the diagnosis in a timely fashion.

Duke, Michael B.

Reference Surface Activities for Crewed Mars Mission Systems and Utilization

This document details constraints and considerations in planning daily activity timelines for crewed exploration on Mars. This work was done for the purpose of estimating how much time during each Martian day (hereafter referred to as a sol) might be available for exploration activities, (also referred to as utilization activities in this document), after accounting for crew and equipment care. These results become part of the factors taken into consideration as specific goals and objectives are assembled into a mission plan.

Stephen J Hoffman

Orbital Drag Near Small Bodies Due to Lofted Fines from Surface Activity

Small bodies have been shown to be more granular and dusty than previously expected. Furthermore, as a result of landings, mining, or natural impacts, bodies with negligible atmospheres, such as moons and asteroids, may experience an exospheric environment abundant in lofted fines. Significant quantities of these may interfere with the nominal trajectories of spacecraft in low orbits. This work investigates the threshold of activity that would induce concerns to a spacecraft's nominal mission around various bodies including the Moon, Bennu, Comet Wild-2, and Phobos. Coupled motion of spacecraft navigation and control is expressed in SE(3).

Fines

Active Flow Control Stator With Coanda Surface

Active Flow Control increases the permissible aerodynamic loading. Curved surface near the trailing edge ("Coanda surface"): a) increases turning -> higher pressure ratio. b) controls boundary layer separation -> increased surge margin. Objective: Reduce the number of vanes or compressor stages. Constraints: 1. In a real compressor, the vane must still function entirely without blowing. 2. Maintain the flow exit angle of the reference stator despite the resulting increase in stator loading.

Guendogdu

Bright sand/dark dust: The identification of active sand surfaces on the Earth and Mars

Field studies and analysis of LANDSAT Thematic Mapper data in the Gran Desierto, Mexico may shed light on a technique to distinguish active from inactive (relict) sand surfaces. Active sand bodies in the study area are consistently brighter (by an average of 20%) at visual and near infrared wavelengths and darker at thermal infrared wavelengths than compositionally similar inactive sands. The reasons for the albedo difference between active and inactive sands are reviewed and the mixing model of Johnson et al. is examined for tracing the provenance of sands based on albedo and spectral variations. Portions of the wavelengths covered by the Mars Orbiter correspond to the Thematic Mapper data. The identification of active sands on Earth, with a priori knowledge of bulk composition and grain size distribution, may allow the remote mapping of active sand surfaces on Mars. In conjuction with thermal infrared remote sensing for composition, it may also provide a method for the remote determination of grain size distributions within sand/silt mixtures.

Blount, H. G., II

A Preliminary Assessment of Physical Demand During Simulated Lunar Surface Extravehicular Activities

Future Artemis missions will require more advanced spacesuits to support exploration and science activities on the Lunar surface. Preparing for these missions requires an understanding of the physical and cognitive demand of performing common surface extravehicular activity (EVA) tasks in a suited partial-gravity environment. This study aims to characterize physical demand during exploration EVA tasks in the Artificial Gravity Offload System (ARGOS) as a function of the task and operational environment itself. Two subjects completed two days of EVA simulations at ARGOS in the Mark III spacesuit offloaded to Lunar gravity (1/6G). Metabolic rate (MR) and heart rate (HR) were continuously recorded while subjects completed an end-to-end EVA as well as standalone tasks. Understanding the physical demand to complete exploration EVA tasks will be instrumental to the future success of exploration spacesuit designs and missions. Further work in this study will be needed to characterize MR during exploration EVA tasks, including expanding the subject pool and testing new suit designs.

Taylor E Schlotman