THE GENESIS OF THE LIGHT-DARK STRUCTURE IN THE PANTAR AND KAPOETA STONE METEORITES
Genesis of light-dark structure in pantar and kapoeta stone meteorites
STONY METEORITE↗
SEARCH · Engineering Papers
Results for “Structured light”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Structured Light-Based Hazard Detection For Planetary Surface Navigation
This paper describes a structured light-based sensor for hazard avoidance in planetary environments. The system presented here can also be used in terrestrial applications constrained by reduced onboard power and computational complexity and low illumination conditions. The sensor is on a calibrated camera and laser dot projector system. The onboard hazard avoidance system determines the position of the projected dots in the image and through a triangulation process detects potential hazards. The paper presents the design parameters for this sensor and describes the image based solution for hazard avoidance. The system presented here was tested extensively in day and night conditions in Lunar analogue environments. The current system achieves over 97 detection rate with 1.7 false alarms over 2000 images.
Nefian, Ara↗
The Load Distribution in Bolted or Riveted Joints in Light-Alloy Structures
This report contains a theoretical discussion of the load distribution in bolted or riveted joints in light-alloy structures which is applicable not only for loads below the limit of proportionality but also for loads above this limit. The theory is developed for double and single shear joints. The methods given are illustrated by numerical examples and the values assumed for the bolt (or rivet) stiffnesses are based partly on theory and partly on known experimental values. It is shown that the load distribution does not vary greatly with the bolt (or rivet) stiffnesses and that for design purposes it is usually sufficient to know their order of magnitude. The theory may also be directly used for spot-welded structures and, with small modifications, for seam-welded structures, The computational work involved in the methods described is simple and may be completed in a reasonable time for most practical problems. A summary of earlier theoretical and experimental investigations on the subject is included in the report.
Vogt, F.↗
3D Scanning Laboratory
The 3D Scanning Lab uses a number of technologies to capture 3D surface data. Those technologies are structured light scanning, discrete point measurement photogrammetry and Light Detecting and Ranging(LIDAR). Structured light is a non-contact optical technique used to capture as built surface geometries quickly and accurately. LIDAR is a laser scanning technique used to capture 3D surfaces. And photogrammetry uses a certified DSLR camera to measure discrete registered and non-registered points in 3D space. MSFC’s 3D Scanning Team uses 3D scanning to provide hardware inspections, reverse engineered CAD models, manufacturing/process development and digital assemblies. The inspection process compares the captured data to CAD, providing a color plot detailing the deviations of the scan data to the CAD model. Dimensional measurements and GD&T can also be interrogated. Inspection can provide scan-to-scan data comparisons which is ideal for assessing tested hardware, e.g. comparing data captured before and after hardware testing. Reverse engineering is used to develop CAD models from scan data. This is useful for heritage hardware studies, developing building or structural models and inputs for simulation studies and design efforts. The lab uses the 3D surface scan data to drive manufacturing/machining processes, termed match machining. This technique has been used to modify nozzles, injectors, additive manufactured parts, composite barrel sections, etc. Parts of an assembly can be scanned and assembled in a virtual environment providing an accurate 3D representation of the assembled hardware in its as-scanned state. This can provide detailed information of internal components that would otherwise not be accessible.
Advanced Manufacturing↗
Liquid crystal light valve structures
An improved photosensor film and liquid crystal light valves embodying said film is provided. The photosensor film and liquid crystal light valve is characterized by a significant lower image retention time while maintaining acceptable photosensitivity. The photosensor film is produced by sputter depositing CdS onto an ITO substrate in an atmosphere of argon/H2S gas while maintaining the substrate at a temperature in the range of about 130 C to about 200 C and while introducing nitrogen gas into the system to the extent of not more than about 1% of plasma mixture. Following sputter deposition of the CdS, the film is annealed in an inert gas at temperatures ranging from about 300 C to about 425 C.
Koda, N. J.↗
Light thermal structures and materials for high speed flight
Over the last twenty years, unified viscoplastic constitutive models have evolved to meet this need. These constitutive models provide a means for representing a material's response from the elastic through the plastic range including strain-rate dependent plastic flow, creep, and stress relaxation. Rate-dependent plasticity effects are known to be important at elevated temperatures. The purpose of this paper is to describe computational and experimental research programs underway at the Light Thermal Structures Center focused on the investigation of the response of structures and materials to local heating. In the first part of the paper, finite element thermoviscoplastic analysis is highlighted. In the second part of the paper, the thermal-structures experimental program is outlined.
Thornton, Earl A.↗
Light Weight Structural Designs via Dynamic Properties
Explore the source record for details and available documents.
light weight↗
Mach number effects on free and wall turbulent structures in light of instability flow interactions
Our perception of fluid instabilities and turbulence is largely based on properties of incompressible vorticity distributions, omega, and the Biot-Savart Law of 'instantaneous' induction at distance. In high-speed shear layers it is the distribution of local angular momentum rho-omega that matters; modified interaction-induction between vortical elements is likely to take place only within relative Mach cones of influence, with acoustic time delay. This and the large mean density stratifications influence strongly instability vortex roll-ups, vortex mergings, and large-scale turbulent structures. Consequences of these observations on transition to turbulence and turbulence energetics are discussed in physical terms. Free shear layers and wall layers may require distinct M modeling.
Morkovin, Mark V.↗
System and Method for Active Multispectral Imaging and Optical Communications
Provided is a system and method for active multispectral imaging having a transmitter that uses narrowband optical radiation to dynamically illuminate an object with modulated structured light in multiple spectral bands, and a receiver that includes an independent panchromatic imager. The transmitter and receiver can be operated in a bistatic decoupled configuration to enable passive multispectral synthesis, illumination-invariant sensing, optical communications, and the ability for the transmitter to emit a sequence of spectral bands in an order that is unknown to the receiver, and the receiver is able to passively decode the spectral identity from a band identifier embedded in the modulated structured light. The receiver passively decodes embedded high-bandwidth simplex communications while reconstructing calibrated multispectral images at video frame rates.
Chirayath, Ved↗
A mathematical investigation of the structure of light metals space technology project no. 5
Explore the source record for details and available documents.
Curry, W. F.↗
Light-dark structure and rare gas content of the carbonaceous chondrite Nogoya.
Nogoya type II carbonaceous chondrite noting cosmogenic, radiogenic and primordial noble gas components
METEORITIC COMPOSITION↗
Research on the exploitation of advanced composite materials to lightly loaded structures
The objective was to create a sailplane which could fly in weaker thermals than present day sailplanes (by being lighter) and to fly in stronger thermals than present sailplanes (by carrying more water ballast). The research was to tackle the interaction of advanced composites and the aerodynamic performance, the interaction of fabrication procedures and the advanced composites, and the interaction of advanced composites and the design process. Many pieces of the overall system were investigated but none were carried to the resolution required for engineering application. Nonetheless, interesting and useful results were obtained and are here reported.
Mar, J. W.↗
Evidence for Filamentary Jet Structure: The Light Curve of GRB 011211
We report on the discovery of the optical afterglow of the X-ray rich, long-duration gamma-ray burst GRB 011211, and the oscillatory behavior present in its optical and X-ray afterglow light curve. The time scale of the fluctuations, -1 hour, is much smaller than the time of the observations, -12 hours from the onset of the gamma-ray burst. The character and strength of the fluctuations visible in the optical data are unprecedented, and are inconsistent with causally connected variations in the emission of a symmetric, relativistic blast wave. Moreover, the differential time lag between the short-term variations in X-ray and optical energies suggests they do not arise from the same emitting region. Such variability may imply that local spherical symmetry is broken because the energy content across the jet-emitting surface is not uniform, indicating the detection of a small scale substructure within the jet itself.
Jakobsson, P.↗
Emergence of Complex Modes in Lightly Damped Structural Systems
In this short presentation format, we will provide a set of useful equations, relationships, and physical interpretations direct from the damped two-mode interaction problem. We will demonstrate that the results from the two-mode interaction problem are in direct agreement with observed test data. Practical methods for estimating the parameters driving the relations direct from modal test data are provided. We finalize with two examples demonstrating weak and strong interactions.
spaceflight hardware↗
In-Space Laser Forming Simulated Under Thermal Vacuum (TVAC) Conditions
NASA Marshall Space Flight Center is investigating laser forming under thermal vacuum conditions representative of the space environment through a partnership with the DARPA NOM4D program. The thermal gradient mechanism (TGM) is used to bend a metal sheet towards the laser optics. Laser equipment and process parameters are being optimized for thermal vacuum conditions. Such conditions are representative of the extreme cold and hot temperatures and high vacuum that exist on orbit or on the lunar surface. in situ photogrammetry and thermography assess the bend/counterbend and elucidate the TGM in thermal vacuum. Structured light scanning and metallography after bending reveal the macroscopic and microscopic structure after TGM.
thermal vacuum↗
Structural analysis of light aircraft using NASTRAN
An application of NASTRAN to the structural analysis of light aircraft was conducted to determine the cost effectiveness. A model of the Baby Ace D model homebuilt aircraft was used. The NASTRAN model of the aircraft consists of 193 grid points connected by 352 structural members. All members are either rod or beam elements, including bending of unsymmetrical cross sections and torsion of noncircular cross sections. The aerodynamic loads applied to the aircraft were in accordance with FAA regulations governing the utility category aircraft.
Wilkinson, M. T.↗
Lightweight Thermoformed Structural Components and Optics
A technique that involves the use of thermoformed plastics has been developed to enable the design and fabrication of ultra-lightweight structural components and mirrors for use in outer space. The technique could also be used to produce items for special terrestrial uses in which minimization of weight is a primary design consideration. Although the inherent strengths of thermoplastics are clearly inferior to those of metals and composite materials, thermoplastics offer a distinct advantage in that they can be shaped, at elevated temperatures, to replicate surfaces (e.g., prescribed mirror surfaces) precisely. Furthermore, multiple elements can be bonded into structures of homogeneous design that display minimal thermal deformation aside from simple expansion. The design aspect of the present technique is based on the principle that the deflection of a plate that has internal structure depends far more on the overall thickness than on the internal details; thus, a very stiff, light structure can be made from thin plastic that is heatformed to produce a sufficiently high moment of inertia. General examples of such structures include I beams and eggcrates.
Zeiders, Glenn W.↗
The Gossamer Initiative
The Gossamer Spacecraft Initiative is a new NASA program to begin long-range development of enabling technologies for very large, ultra-lightweight structures and apertures. Large apertures include optical, infrared and submillimeter telescopes, "photon buckets" for optical communications and "non-coherent" imaging, solar concentrators, and radio frequency antennas. Developments in the very large ultra-light structures will be forces on one of their most challenging applications-solar sails. The sail structures will include both 3-axis stabilizing and spinning. Gossamer spacecraft technology will eventually allow NASA to undertake bold new missions of discovery, such as searching for the signs of life on planets orbiting nearby stars and sailing through space on beams of light of places beyond our solar system.
Chmielewski, Artur B.↗