Results for “Strong form” — Page 2

DOE OSTI2025

Determination of Thiol Protonation States by Sulfur X-ray Spectroscopy in Biological Systems

Cysteine is one of the most functionally diverse of the proteinogenic amino acids, owing to its reactive thiol side chain that can undergo deprotonation to form a strongly nucleophilic thiolate. However, few techniques can directly interrogate sulfur charge and covalency in cysteine, particularly in proteins. X-ray spectroscopies provide an element specific probe of sulfur. We demonstrate the sensitivity of S Kβ and Kα X-ray emission spectroscopy (XES) to cysteine ionization and compare it to S K-edge X-ray absorption spectroscopy (XAS) in the physiologically relevant biomolecules l-cysteine and N-acetyl-l-cysteine at room temperature in solution phase. Kβ XES and K-edge XAS are most sensitive to chemical changes at the cysteine thiol and can be used to evaluate the composition of thiol/thiolate mixtures. Furthermore, these results provide a foundation for assessing the pK a of functionally significant cysteine residues in proteins and open the door to time-resolved studies of cysteine-dependent enzymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

ATR-SEIRAS Reveals Potential Inversion and Associated Electron Transfer Kinetics in the Reduction of Surface-Confined Anthraquinone

The detection of stable semiquinone radicals on an anthraquinone (AQ) layer chemically grafted to an electrode surface in aqueous electrolytes has been elucidated by using attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR-SEIRAS). In very alkaline conditions (pH 13), the reduction of the AQ involves no proton transfer, but surface sensitive infrared spectroscopy reveals that the anthraquinone dianion forms a strong hydrogen bonding network with coadsorbed water, leading to irreversible features in the voltammetry. The potential dependence of the IR band assigned to the AQ radical is consistent with the enhanced hydrogen bonding network causing increased stabilization of the quinone radical and supports the predicted response of a system under mild potential inversion, whereby the formal potential for the reduction of the anthraquinone radical is positive of the reduction potential of the neutral AQ molecule. Time-resolved ATR-SEIRAS is used to measure the transient formation of the AQ •– radical, from which rate constant information can be extracted using the Butler–Volmer model involving two one-electron transfers without a direct disproportionation reaction. The potential dependence of the rate constants is consistent with the potential inversion and can be used to qualitatively simulate the measured cyclic voltammograms. In conclusion, the thermodynamic and kinetic analyses re-emphasize long established deficiencies associated with using one-electron reaction formalisms to characterize multi-electron systems.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗

DOE OSTI2026

Pressure-induced 𝐵⁢1 to 𝐵⁢2 phase transition in CeN studied by 𝑎⁢𝑏 𝑖⁢𝑛⁢𝑖⁢𝑡⁢𝑖⁢𝑜 correlation matrix renormalization theory calculations

We apply correlation matrix renormalization theory (CMRT) to cerium nitride (CeN) under pressure. For 𝐵⁢1 (NaCl-type) phase, CMRT gives an equation of state consistent with ambient pressure experiments. It produces electronic density-of-state (DOS) characterized by a sharp 4⁢𝑓 quasiparticle resonance peak pinned at the Fermi level and two subbands formed by strong hybridization between the localized Ce-4⁢𝑓 electrons and the itinerant Ce-5⁢𝑑 and N-2⁢𝑝 electrons below the Fermi level, consistent with x-ray photoemission spectroscopy experiments. Upon compression, CMRT predicts a first-order 𝐵⁢1 → 𝐵⁢2 (CsCl-type) transition with ∼11% volume collapse in agreement with experiments. Across the transition, the 4⁢𝑓 spectrum broadens, the 4⁢𝑓 orbital occupancy increases, and the hybridization with conduction states enhances, signaling a crossover from partially localized to more itinerant 4⁢𝑓 behavior. Furthermore, these features are in excellent agreement with experimental observations, demonstrating that CMRT provides a parameter-free description and prediction of correlation-driven structural and electronic transitions in rare-earth compounds.

Ab initio calculations↗

DOE OSTI2026

Boron Coordination in Multicomponent Glasses: Analytical Models and Machine Learning With Uncertainty

Borosilicate glasses are extensively used in a variety of applications from kitchenware to nuclear waste immobilization due to the strong network formed by the Si-O-B bond that makes it resistant to chemical corrosion and gives it a low thermal expansion. Boron, however, exists in both trigonal BO3 and tetrahedral BO4 bonds in glass systems, which impacts the chemical durability and thermal resistance of the glass, amongst other properties. Boron coordination (N4), or the ratio of the amount of BO4 to BO3 within a glass, may aid in predicting these properties but is difficult to derive without experimental data due to the complexity of impacts from varied glass compositions and processing factors. For this reason, compositional models have been developed to predict boron coordination, but the models typically include a limited number of glass components. To help fill this gap in the models, in this work, a diverse multicomponent glass dataset of 809 glasses is compiled from a literature search, and then a number of analytical and machine learning (ML) models are trained on the dataset. Previously developed modified Bernstein and modified Du Stebbins analytical models were fitted to update parameters with the new dataset. Then, partially Bayesian neural networks, Gaussian process regressor, and heteroskedastic deterministic neural networks were evaluated. The ML models examined all have different strategies to overcome the potential for overfitting as a result of a limited training dataset, and return results that account for model uncertainty, which can be valuable for understanding model reliability. For the first time, cooling rate is introduced as an input parameter for ML models, showing consistent improvements in performance and solidifying the importance of including parameters outside of composition alone for N4 prediction. The machine learning models examined here show promise in accurate predictions of boron coordination in borosilicate glasses, all achieving R2 values of 0.91.

boron coordination↗

DOE OSTI2026

Time-, space-, and molecule-resolved multiple plasma reactive species in complex settings using an innovative approach of cavity ringdown spectroscopy (Project Final Report)

The primary research goal of this 2-year project is to demonstrate the feasibility of an innovative approach to measure reactive plasma species in the most challenging settings: right on the surface of water and under water. We propose to use the Brewster angle-cavity ringdown spextroscopy (BA-CRDS). Research objectives include: 1) Measurements of OH and NO in the plasma gas-phase zone (Z1) using different types of LTP sources including continuous and pulsed plasma jets, sheets, torches, etc. 2) Measurements of OH and NO in the multiphase reaction zones, right on the surface of water (Z2) and under water (Z3). 3) RS formation and loss mechanisms and reaction dynamics in the three zones. 4) Generalization of the proposed system to be configurable with other selected innovative techniques for other LTP parameters; invitation of selected PIs to form a strong collaborative team to pursue the follow-up effort (Category-2).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Organic Rankine Cycle Integration and Optimization for High Efficiency CHP Genset Systems (Final Technical Report)

This project successfully advanced the integration of Organic Rankine Cycle (ORC) technology with reciprocating engine–based combined heat and power (CHP) systems to improve electrical efficiency, total CHP efficiency, and grid-responsive operation. Over three budget periods, the work progressed from high-temperature ORC component development and thermodynamic model validation to next-generation system design, working fluid transition, and techno-economic analysis. Key technical accomplishments include development and validation of a thermodynamic model capable of accurately predicting ORC performance across an expanded temperature and pressure envelope; successful identification and validation of low-global-warming-potential (GWP) working fluids—most notably R1233zd(E)—as viable replacements for R245fa; and demonstration of scalable ORC architectures suitable for integration with 1–20 MW class reciprocating engines. These advances enable flexible CHP configurations that can increase electrical output while maintaining high overall utilization of available thermal energy. The project also produced a clean-sheet design for a next-generation ORC system targeting substantially higher power output per unit, supported by detailed component selection, heat exchanger evaluation, and system-level modeling. Techno-economic analyses indicate that ORC-enabled flexible CHP systems can meet or exceed Department of Energy (DOE) efficiency targets while providing value to both facility operators and the electric grid.. Late-stage testing of the largest next-generation ORC prototype identified limitations related to pump net positive suction head (NPSH) requirements and condenser flooding under certain operating conditions. Although these issues constrained full validation of that configuration within the project timeframe, they provided clear and actionable design guidance for future system refinements. Importantly, validated modeling, smaller-scale testing, and working fluid evaluations confirmed the technical viability of the overall approach. In aggregate, this project met its core objectives by establishing validated design tools, de-risking key ORC technologies for CHP applications, and defining a credible pathway toward commercialization of flexible, high-efficiency CHP systems. The results form a strong foundation for continued development and deployment beyond the conclusion of the DOE-funded effort.

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2026

Higher-Form Anomalies on Lattices

We show that generic gapped quantum many-body states which respect an anomalous finite higher-form symmetry have an exponentially small overlap with any short-range entangled (SRE) state. Hence, anomalies of higher-form symmetries enforce $intrinsic$ long-range entanglement, which is in contrast with anomalies of ordinary (0-form) symmetries which are compatible with symmetric SRE states (specifically, symmetric cat states). As an application, we show that the anomalies of strong higher-form symmetries provide a diagnostic for mixed-state topological order in $d \geq 2$ spatial dimensions. We also identify a new (3+1)D intrinsic mixed-state topological order that does not obey remote-detectability by local decoherence of the (3+1)D Toric Code with fermionic loop excitations. This breakdown of remote detectability, as encoded in anomalies of strong higher-form symmetries, provides a partial characterization of intrinsically mixed-state topological order.

Feng, Yitao [Peking University, Beijing (China)] (↗

DOE OSTI2025

Ultrafast optical modulation of vibrational strong coupling in ReCl(CO) 3 (2,2-bipyridine)

Polaritons – hybrid light-matter states formed from the strong coupling of a bright molecular transition with a confined photonic mode – may offer new opportunities for optical control of molecular behavior. Vibrational strong coupling (VSC) has been reported to impact ground-state chemical reactivity, but its influence on electronic excited-state dynamics remains unexplored. Here, we take a first step towards excited-state VSC by demonstrating optical modulation of the ReCl(CO) 3 (bpy), (bpy = 2,2-bipyridine) complex under VSC using femtosecond ultraviolet (UV)-pump/infrared (IR)-probe spectroscopy. We establish ground-state VSC of ReCl(CO) 3 (bpy) in a microfluidic Fabry-Pérot cavity equipped with indium tin oxide (ITO)-coated mirrors. ITO is effectively dichroic as it is reflective in the IR and transmissive in the UV-visible and therefore minimizes optical interference. Excitation with UV pump light drives ReCl(CO) 3 (bpy) into a manifold of electronic excited states that subsequently undergo non-radiative relaxation dynamics. We probe the transient response of the strongly-coupled system in the mid-IR, observing both Rabi contraction and cavity-filtered excited-state absorption signatures. We reconstruct the intrinsic response of intracavity molecules from the transient cavity transmission spectra to enable quantitative comparison with extracavity control experiments. We report no changes in the excited-state dynamics of ReCl(CO) 3 (bpy) under ground-state VSC. However, we do observe significant amplification of transient vibrational signals due to classical cavity-enhanced optical effects. This effort lays the groundwork to pursue direct excited-state VSC aimed at modulating photochemical reactivity.

cavity-enhanced spectroscopy↗

DOE OSTI2025

Conformationally Adaptable Extractant Flexes Strong Lanthanide Reverse-Size Selectivity

Chemical selectivity is traditionally understood in the context of rigid molecular scaffolds with precisely defined local coordination and chemical environments that ultimately facilitate a given transformation of interest. By contrast, nature leverages dynamic structures and strong coupling to enable specific interactions with target species in otherwise complex media. Taking inspiration from nature, we demonstrate unconventional selectivity in the solvent extraction of light over heavy lanthanides using a conformationally flexible ligand called octadecyl acyclopa (ODA). This novel ligand forms pseudocyclic molecular complexes with lanthanide ions at organic/aqueous interfaces, revealed by vibrational sum frequency generation spectroscopy. These complexes are extracted into the organic phase, where femtosecond structural dynamics are probed by two-dimensional infrared spectroscopy and ab initio molecular dynamics simulations to mechanistically frame the macroscopic selectivity trends. We find larger-than-expected structural fluctuations and bond lengths for heavy Ln–ODA complexes that arise from an inability of ODA to contort around the smaller ions to satisfy all would-be bonding interactions, despite forming some individually strong bonds. This finding contrasts with the binding of ODA with lighter lanthanides where, despite individually weaker bonds, collective interactions manifest that minimize structural fluctuations and give rise to enhanced thermodynamic stability. Furthermore, these results point to a new paradigm where conformational dynamics and cumulative bonding interactions can be used to facilitate unconventional chemical transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Effect of seasonal anoxia on geochemical cycling in a stratified pond: Comparison to cooler pond conditions 40 years ago

Seasonal stratification in temperate lakes deeper than a few meters creates favorable conditions for pronounced vertical redox zones, often resulting in anaerobic hypolimnions and significant geochemical changes. Here, this study examined thermocline formation and trace element behavior in a seasonally stratified pond amid rising air temperatures. Over two years, data were collected from Pond B at the US Department of Energy Savannah River Site in Aiken, South Carolina. Pond B, a man-made monomictic reservoir, received cooling water from a nuclear reactor from 1961 to 1964. Strong thermal stratification forms a distinct thermocline in May and progresses downward until November. Compared to the 1980s, this study shows a delayed onset and extended duration of stratification. The prolonged summer stratification reduces deep water oxygen replenishment, extending hypoxic conditions. Trace and major elements sampled in the water column revealed strong correlations between As, Fe, and Mn profiles, with concentrations increasing by 1–2 orders of magnitude in the anaerobic hypolimnion. This period captured the seasonal transition from winter mixing to summer stratification to fall overturn. Under anoxic conditions, Fe(III) reduces to Fe(II) in the sediment, releasing dissolved iron into the water column. The extended anoxic periods likely promoted arsenic release from sediments. Prolonged anoxia may enhance arsenic mobilization and solubility in the lake. This study illustrates how climate-induced changes in seasonal stratification of contaminated waters can convert contaminant sinks into sources, offering insights into the cycling of arsenic and other dissolved ions in stratified lakes and their implications for water quality management.

Anoxic conditions↗

DOE OSTI2024

Anisotropic, multiband, and strong-coupling superconductivity of the Pb 0.64 ⁢Bi 0.36 alloy

This paper presents theoretical and experimental studies on the superconductivity of Pb ⁢0.64 ⁢Bi 0.36 alloy, which is a prototype of strongly coupled superconductors and exhibits one of the strongest coupling under ambient pressure among the materials studied so far. The critical temperature, the specific heat in the superconducting state, and the magnetic critical fields are experimentally determined. Deviations from the single-gap s-wave BCS-like behavior are observed. The electronic structure, phonons, and electron-phonon interactions are analyzed in relation to the metallic Pb, explaining why the Pb-Bi alloy exhibits such a large value of the electron-phonon coupling parameter λ ≃ 2. Superconductivity is studied using the isotropic Eliashberg formalism as well as the anisotropic density functional theory for superconductors. Here, we find that while Pb is a two-gap superconductor with well-defined separate superconducting gaps, in the Pb-Bi alloy an overlapped three-gap-like structure is formed with a strong anisotropy. Furthermore, the chemical disorder, inherent to this alloy, leads to strong electron scattering, which is found to reduce the critical temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Chain rigidity controlled aggregation ability and solid-state microstructures for efficient stretchable conjugated polymer films

Stretchable conjugated polymer films with good electrical performance under mechanical deformation are highly desirable for soft electronics. However, the mechanical and electrical properties of these films, particularly in conjugated polymer:elastomer blends, are not fully understood at molecular level. Here, this study explores the relationships among molecular structure, aggregation ability, film microstructure, and the electrical/mechanical properties of three diketopyrrolopyrrole-based conjugated polymers (P1, P2, P3) with decreasing backbone rigidity and their corresponding polymer:elastomer blends. The most flexible polymer P3 shows strong aggregation, which forms highly crystalline fibers to produce fragile neat film and produces large isolated crystallites restricting charge transport in blend film. As chain rigidity increases, the P1 and P2 polymers show weaker aggregation, and produce smaller crystallites in neat films with enhanced ductility. P1 and P2 based blend films display nanocrystallites polymer networks with dispersed elastomer domains. As a result, we achieved near-constant charge mobility before and after stretching under 50 % strain for P2-based blend films with well-controlled pathways for both charge transport and energy dissipation. This study demonstrates the critical role of backbone rigidity in regulating the properties of stretchable conjugated polymer films, paving the way for more reliable and deformable materials in soft electronics.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Structural Insight into a Sixteen Cyanine Dye Construct via Exciton–Exciton Annihilation

Molecular (dye) aggregates play a prominent role in light harvesting and are of interest in quantum information science; however, there are limited reports hat programmably assemble many (>4) dye aggregates featuring strong coupling and exciton delocalization. Using oligonucleotides with four Cy5s covalently linked in series along the phosphate backbone, we bring four, eight, and sixteen Cy5s in close proximity by assembling four-armed junctions. We elucidate their structure via gel electrophoresis and steady-state and transient optical spectroscopy. We find that Cy5 has a strong propensity to form tetramer clusters, where the exciton is delocalized over all four Cy5s, that the exciton is not delocalized beyond tetramer clusters in the eight and sixteen Cy5 constructs, and that the sixteen Cy5 construct may consist of pairs of tetramer clusters that are isolated from one another. Many-dye aggregates such as these may serve useful as antennae for their intense light absorption and spatially directed energy transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Mechanochemical Solid Form Screening of Zeolitic Imidazolate Frameworks Using Structure-Directing Liquid Additives

We demonstrate a systematic application of the mechanochemical liquid-assisted grinding (LAG) methodology to screen for forms of zinc imidazolate (ZnIm 2 ), of fundamental importance as the simplest member of the zeolitic imidazolate framework materials family. The exploration of 45 different liquid additives, selected based on their molecular structure and physicochemical properties has resulted in eight different ZnIm 2 topological forms, appearing in 13 crystallographically distinct solid forms (including two previously unknown forms of the crb (BCT) topology), amorphous phases, and the interrupted moc-Zn 4 Im 8 HIm. All prepared topological forms were also explored computationally, using dispersion-corrected periodic density functional theory (DFT) calculations, enabling the rationalization of screening outcomes, and setting the stage for future prediction of additive-directed metal–organic framework (MOF) synthesis. This first systematic exploration of LAG in screening for three-dimensional MOFs demonstrates the potential of the liquid additive to not only accelerate materials synthesis, but also to direct it toward topologically different MOFs. The discovery of novel forms of a material that already exhibits at least 21 crystallographically and functionally different forms provides a strong testimony on the power of mechanochemistry in metal–organic materials discovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Extracting the femtometer structure of strange baryons using the vacuum polarization effect

Abstract One of the fundamental goals of particle physics is to gain a microscopic understanding of the strong interaction. Electromagnetic form factors quantify the structure of hadrons in terms of charge and magnetization distributions. While the nucleon structure has been investigated extensively, data on hyperons are still scarce. It has recently been demonstrated that electron-positron annihilations into hyperon-antihyperon pairs provide a powerful tool to investigate their inner structure. We present a method useful for hyperon-antihyperon pairs of different types which exploits the cross section enhancement due to the effect of vacuum polarization at theJ/ψresonance. Using the 10 billionJ/ψevents collected with the BESIII detector, this allows a precise determination of the hyperon structure function. The result is essentially a precise snapshot of the$$\bar{\Lambda }{\Sigma }^{0}\,(\Lambda {\bar{\Sigma }}^{0})$$ Λ ¯ Σ 0 ( Λ Σ ¯ 0 ) transition process, encoded in the transition form factor ratio and phase. Their values are measured to beR = 0.860 ± 0.029(stat.) ± 0.015(syst.),$$\Delta {\Phi }_{\bar{\Lambda }{\Sigma }^{0}}=(1.011\pm 0.094({{\rm{stat.}}})\pm 0.010({{\rm{syst.}}}))\,{{\rm{r}}}ad$$ Δ Φ Λ ¯ Σ 0 = ( 1.011 ± 0.094 ( stat. ) ± 0.010 ( syst. ) ) r a d and$$\Delta {\Phi }_{\Lambda {\bar{\Sigma }}^{0}}=(2.128\pm 0.094({{\rm{stat.}}})\pm 0.010({{\rm{syst.}}}))\,{{\rm{r}}}ad$$ Δ Φ Λ Σ ¯ 0 = ( 2.128 ± 0.094 ( stat. ) ± 0.010 ( syst. ) ) r a d . Furthermore, charge-parity (CP) breaking is investigated in this reaction and found to be consistent with CP symmetry.

Science & Technology - Other Topics↗

DOE OSTI2025

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel Jana Howard1,3, Guang Yang3, Haiyan Zhao1*, Patrick Warren4, Tiankai Yao3, Steven Cavazos4 Elizabeth Sooby Wood4*, Ching-heng Shiau2 1 University of Idaho, Environmental Science, Idaho Falls, Idaho, USA 2 Boise State University, Microscopy and Characterization Suite, Idaho Falls, Idaho, USA 3 Idaho National Laboratory, Idaho Falls, Idaho, USA 4 University of Texas San Antonio, Department of Physics and Astronomy, San Antonio, Texas, USA *Corresponding author: haiyanz@uidaho.edu; elizabeth.soobywood@utsa.edu Tri-structural Isotropic (TRISO) particle fuel is the preferred choice for the newest and next-generation high-temperature nuclear reactors due to its robust construction [1]. The fuel design effectively contains fission products inside the particle at extremely high temperatures [2]. However, the effect of transition metal fission products on fuel performance and structural integrity remains largely unknown, creating uncertainties in predicting fuel performance and potential failure mechanisms [2]. For example, palladium (Pd) has a strong tendency to form intermetallic phases with uranium (U). These new phases tend to be hard and brittle which could lead to fracture of fuel kernel during irradiation [3,4]. Pd is not normally produced in high concentrations in normal fission reactions however, driving the production of Pd into the locality of a Uranium Oxycarbide (UCO) nuclear fuel provides an opportunity to closely observe the diffusion and chemical interactions. This study focuses on detailed transmission electron microscopy characterization of the intermetallic phases formed by the interaction between a UCO kernel and a Pd bar after annealing at 1100 °C for 100 hours. Figure 1 provides an overview of the UCO kernel in contact with the Pd bar. The UCO-Pd sample surface was examined using a Focused Ion Beam (FIB) Quanta 3D FEG FEI in VCD detector mode at 10kV, 83pA to reveal surface features. Several key surface features in the interaction region were observed including: (1) a small area with dendritic microstructure, (2) color contrast near the UCO kernel and Pd boundary, and (3) darker and lighter regions throughout the sample surface. To analyze diffusion behavior, FIB was used to prepare lamellae from five different areas of the UCO-Pd sample, as well as one for the as-received sample. These lamellae were examined using a Scanning Transmission Electron Microscope ThermoFisher Spectra 300 (STEM-Spectra). Energy Dispersive Spectroscopy results confirmed the diffusion between the UCO fuel and Pd bar. Figure 2 shows the identified phases of UC, UO2, and Pd dispersed throughout the interaction region. It was also found that the Pd concentration decreases as the radial distance from the UCO-Pd interface increases. The Pd concentration was 36.93% atomic fraction 11µm from the interaction region then decreased to 7.51% atomic fraction at 257 µm away from the interaction region. Figure 3 shows how concentrations of U and Pd vary across the interaction zone, highlighting the extent of diffusion. This study confirms that Pd interacts with surrounding material to form U-Pd phase and diffusion zones. These diffusion zones vary in composition depending on its radial distance from the point of contact with the Pd bar. These findings contribute to a deeper understanding of the fission product behavior in high temperature nuclear fuels, aiding in the prediction and mitigation of potential fuel degradation mechanisms. A B C Fig. 1. SEM micrographs of UCO fuel kernel in contact with solid Pd bar and the lift out locations. Figure 1A shows UCO fuel kernel in contact with solid Pd bar. Figure 1B shows a higher magnification image of the UCO fuel-Pd interaction zone. Figure 1C shows lift out sites for the lamellae. A B C Fig 2. EDS maps reveal the distribution of U, O, and Pd in location 3. Figure 2A shows the distribution of uranium. Figure 2B shows the distribution of oxygen. Figure 2C shows the distribution of palladium. A B C Fig 3. Palladium and uranium concentration across interaction zone in location 2. Figure 3A shows EDS map of lift out number 2. Figure 3B shows a zoomed in EDS map taken from the interaction zone. Figure 3C shows a line graph of uranium and palladium concentrations across the interaction zone. References: 1. B.E. Wells, N.R. Phillips, K.J. Geelhood. Pacific West Laboratory. (2021). TRISO Fuel: Properties and Failure Modes. https://www.nrc.gov/docs/ML2117/ML21175A152.pdf (Accessed January 16, 2025). 2. American Nuclear Society. TRISO Fuel Development Progresses in INL, ORNL. https://www.gen-4.org/gif/upload/docs/application/pdf/2014-03/nov13nn_fuel_reprint.pdf (Accessed January 16, 2025) 3. Clark R.A., M.A. Con

36 - MATERIALS SCIENCE↗

DOE OSTI2025

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel Jana Howard1,3, Guang Yang3, Haiyan Zhao1*, Patrick Warren4, Tiankai Yao3, Steven Cavazos4 Elizabeth Sooby Wood4*, Ching-heng Shiau2 1 University of Idaho, Environmental Science, Idaho Falls, Idaho, USA 2 Boise State University, Microscopy and Characterization Suite, Idaho Falls, Idaho, USA 3 Idaho National Laboratory, Idaho Falls, Idaho, USA 4 University of Texas San Antonio, Department of Physics and Astronomy, San Antonio, Texas, USA *Corresponding author: haiyanz@uidaho.edu; elizabeth.soobywood@utsa.edu Tri-structural Isotropic (TRISO) particle fuel is the preferred choice for the newest and next-generation high-temperature nuclear reactors due to its robust construction [1]. The fuel design effectively contains fission products inside the particle at extremely high temperatures [2]. However, the effect of transition metal fission products on fuel performance and structural integrity remains largely unknown, creating uncertainties in predicting fuel performance and potential failure mechanisms [2]. For example, palladium (Pd) has a strong tendency to form intermetallic phases with uranium (U). These new phases tend to be hard and brittle which could lead to fracture of fuel kernel during irradiation [3,4]. Pd is not normally produced in high concentrations in normal fission reactions however, driving the production of Pd into the locality of a Uranium Oxycarbide (UCO) nuclear fuel provides an opportunity to closely observe the diffusion and chemical interactions. This study focuses on detailed transmission electron microscopy characterization of the intermetallic phases formed by the interaction between a UCO kernel and a Pd bar after annealing at 1100 °C for 100 hours. Figure 1 provides an overview of the UCO kernel in contact with the Pd bar. The UCO-Pd sample surface was examined using a Focused Ion Beam (FIB) Quanta 3D FEG FEI in VCD detector mode at 10kV, 83pA to reveal surface features. Several key surface features in the interaction region were observed including: (1) a small area with dendritic microstructure, (2) color contrast near the UCO kernel and Pd boundary, and (3) darker and lighter regions throughout the sample surface. To analyze diffusion behavior, FIB was used to prepare lamellae from five different areas of the UCO-Pd sample, as well as one for the as-received sample. These lamellae were examined using a Scanning Transmission Electron Microscope ThermoFisher Spectra 300 (STEM-Spectra). Energy Dispersive Spectroscopy results confirmed the diffusion between the UCO fuel and Pd bar. Figure 2 shows the identified phases of UC, UO2, and Pd dispersed throughout the interaction region. It was also found that the Pd concentration decreases as the radial distance from the UCO-Pd interface increases. The Pd concentration was 36.93% atomic fraction 11µm from the interaction region then decreased to 7.51% atomic fraction at 257 µm away from the interaction region. Figure 3 shows how concentrations of U and Pd vary across the interaction zone, highlighting the extent of diffusion. This study confirms that Pd interacts with surrounding material to form U-Pd phase and diffusion zones. These diffusion zones vary in composition depending on its radial distance from the point of contact with the Pd bar. These findings contribute to a deeper understanding of the fission product behavior in high temperature nuclear fuels, aiding in the prediction and mitigation of potential fuel degradation mechanisms. A B C Fig. 1. SEM micrographs of UCO fuel kernel in contact with solid Pd bar and the lift out locations. Figure 1A shows UCO fuel kernel in contact with solid Pd bar. Figure 1B shows a higher magnification image of the UCO fuel-Pd interaction zone. Figure 1C shows lift out sites for the lamellae. A B C Fig 2. EDS maps reveal the distribution of U, O, and Pd in location 3. Figure 2A shows the distribution of uranium. Figure 2B shows the distribution of oxygen. Figure 2C shows the distribution of palladium. A B C Fig 3. Palladium and uranium concentration across interaction zone in location 2. Figure 3A shows EDS map of lift out number 2. Figure 3B shows a zoomed in EDS map taken from the interaction zone. Figure 3C shows a line graph of uranium and palladium concentrations across the interaction zone. References: 1. B.E. Wells, N.R. Phillips, K.J. Geelhood. Pacific West Laboratory. (2021). TRISO Fuel: Properties and Failure Modes. https://www.nrc.gov/docs/ML2117/ML21175A152.pdf (Accessed January 16, 2025). 2. American Nuclear Society. TRISO Fuel Development Progresses in INL, ORNL. https://www.gen-4.org/gif/upload/docs/application/pdf/2014-03/nov13nn_fuel_reprint.pdf (Accessed January 16, 2025) 3. Clark R.A., M.A. Con

36 - MATERIALS SCIENCE↗

DOE OSTI2025

Strong Hilbert space fragmentation and fractons from subsystem and higher-form symmetries

Here, we introduce a route to Hilbert space fragmentation in high dimensions leveraging the group-word formalism. We show that taking strongly fragmented models in one dimension and “lifting” to higher dimensions using subsystem symmetries can yield strongly fragmented dynamics in higher dimensions, with subdimensional (e.g., lineonic) excitations. This provides a route to higher-dimensional strong fragmentation, and also a route to fractonic behavior. Meanwhile, lifting one-dimensional fragmented models to higher dimensions using higher-form symmetries yields models with topologically robust fragmentation. In three or more spatial dimensions, one can also “mix and match” subsystem and higher-form symmetries, leading to canonical fracton models such as X cube. We speculate that this approach could also yield a route to non-Abelian fractons. These constructions unify a number of phenomena that have been discussed in the literature, as well as furnishing models with unique properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗