Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Space Interferometers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Control of the Laser Interferometer Space Antenna

The detection of gravity waves will open a new window of observation on the universe. Unlike typical observatories, which detect electromagnetic waves traveling through space-time, the Laser Interferometer Space Antenna (LISA) will detect ripples in space-time itself. Science targets include galactic binaries, merging supermassive black holes, intermediate-mass/seed black holes, and cosmological backgrounds. Gravity waves are detected by measuring the strain in space, i.e. the change in distance between a set of masses (test masses or proof masses) separated by a great distance. Ground based detection of gravity waves by Laser Interferometer Gravitational Wave Observatory (LIGO) and other observatories are possible with laser interferometry; hut the relatively short arm length (4 km) and seismic noise limit the measurement band to above 10 Hz on Earth. LISA also uses laser interferometric measurement of the change in distance between test masses, but does it in space. Each LISA spacecraft embodies two test masses. Space allows very long arm lengths (5 million km for LISA) and a very quiet acceleration environment (3.5x10(exp -15) meters per second squared/Hertz (sup 0.5) for LISA), which allows for the detection of gravity wave strains to a best sensitivity of 3x10(exp -24) strain/Hertz (sup 0.5) over the measurement band of 10(exp -4) to 10(exp -1) Hertz for a one-year observation. The LISA mission consists of three spacecraft in heliocentric orbit. The orbits are chosen so that the three spacecraft form a roughly equilateral triangle with its center located at a radius of 1 AU and 20 degrees behind the Earth, as shown. Requirements are placed on the rotational and translational dynamics of each spacecraft to ensure that the proper sensitivity for science measurements can be achieved.

Maghami, Peiman↗
NASA NTRS2003

Precision Pointing for the Laser Interferometer Space Antenna (LISA) Mission

The Laser Interferometer Space Antenna (LISA) mission is a planned NASA-ESA gravity wave detector consisting of three spacecraft in heliocentric orbit. Lasers are used to measure distance fluctuations between the proof masses aboard the spacecraft to the picometer level over the 5 million kilometer spacing. Each spacecraft and it's two laser transmit/receive telescopes must be held stable in pointing to less than 8 nanoradians per root Hertz in the frequency band 0.1 mHz to 0.1 Hz. This is accomplished by sensing the pointing error in the received beam and controlling the spacecraft attitude with a set of micronewton thrusters. Requirements, sensors, actuators, control design, and simulations are described in this paper.

Bauer, Frank H.↗
NASA NTRS1999

Laser Interferometer Space Antenna (LISA) Far Field Phase Patterns

The Laser Interferometer Space Antenna (LISA) for the detection of Gravitational Waves is a very long baseline interferometer, which will measure the changes in the distance of a five million kilometer arm to picometer accuracies. Knowledge of the phase deviations from a spherical wave and what causes these deviations are needed considerations in (as a minimum) the design of the telescope and in determining pointing requirements. Here we will present the far field phase deviations from a spherical wave for given Zernike aberrations of the exit pupil and discuss how these results affect the choice of a telescope design.

Waluschka, Eugene↗
NASA NTRS2000

Laser Interferometer Space Antenna (LISA) Far Field Phase Patterns

The Laser Interferometer Space Antenna (LISA) consists of three spacecraft in orbit about the sun. The orbits are chosen such that the three spacecraft are always at (roughly) the vertices of a equilateral triangle with 5 million kilometer leg lengths. Even though the distances between the three spacecraft are 5 million kilometers, the expected phase shifts between any two beams, due to a gravitational wave, only correspond to a distance change of about 10 pico meters, which is about 10(exp -5) waves for a laser wavelength of 1064 nm. To obtain the best signal-to-noise ratio, noise sources such as changes in the apparent distances due to pointing jitter must be controlled carefully. This is the main reason for determining the far-field phase patterns of a LISA type telescope. Because of torque on the LISA spacecraft and other disturbances, continuous adjustments to the pointing of the telescopes are required. These pointing adjustments will be a "jitter" source. If the transmitted wave is perfectly spherical then rotations (Jitter) about its geometric center will not produce any effect at the receiving spacecraft. However, if the outgoing wave is not perfectly spherical, then pointing jitter will produce a phase variation at the receiving spacecraft. The following sections describe the "brute force" computational approach used to determine the scalar wave front as a function of exit pupil (Zernike) aberrations and to show the results (mostly graphically) of the computations. This approach is straightforward and produces believable phase variations to sub-pico meter accuracy over distances on the order of 5 million kilometers. As such this analyzes the far field phase sensitivity to exit pupil aberrations.

Waluschka, Eugene↗
NASA NTRS2005

Polarization Considerations for the Laser Interferometer Space Antenna

A polarization ray trace model of the Laser Interferometer Space Antenna s (LISA) optical path is being created. The model will be able to assess the effects of various polarizing elements and the optical coatings on the required, very long path length, picometer level dynamic interferometry. The computational steps are described. This should eliminate any ambiguities associated with polarization ray tracing of interferometers and provide a basis for determining the computer model s limitations and serve as a clearly defined starting point for future work.

Waluschka, Eugene↗
NASA NTRS2005

Modeling the Laser Interferometer Space Antenna Optics

Creating an optical model of the Laser Interferometer Space antenna which can be used to predict optical sensitivities and set tolerances sufficiently well such that picometer level displacements can be reliably seen poses certain challenges. In part, because the distances between key optical elements, the proof masses, are constantly changing, at speeds of meters/second, the separation between them is about 5 million kilometers and a contributing factor to optical jitter is the self-gravity of the spacecraft. A discussion of the current state and future approach(s) to the creation of such an optical model will be presented.

Waluschka, Eugene↗
NASA NTRS2004

Far-Infrared Space Interferometers: Future Windows on Star and Planet Formation

Far-IR space interferometers will provide observational access to a spectral region containing many important cooling and diagnostic spectral lines and the bulk of the thermal emission from dust at angular scales critical to advancing our understanding of the star and planet formation process. We will describe concepts for the Space Infrared Interferometric Telescope (SPIRIT) and the Submillimeter Probe of the Evolution of Cosmic Structure (SPECS). Both of these candidate NASA missions are imaging and spectral Michelson interferometers operating in the wavelength range -40 - 800 microns. SPIRIT, which could be launched in a decade as a NASA Origins Probe, is built on a deployable boom and has a maximum baseline length of -30 - 50 m, yielding sub-arcsecond resolution in the far-IR. SPIRIT will thus provide far-IR/sub-mm measurements complementary to the near- and mid-IR measurements obtainable with the James Webb Space Telescope (JWST), and well matched to JWST observations in angular resolution. Ultimately SPECS, a NASA Vision Mission, will use formation flying to attain baseline lengths up to 1 km, and thus angular resolution comparable to that of the Hubble Space Telescope and the Atacama Large Millimeter Array. We will report preliminary results of the NASA-sponsored SPIRIT and SPECS mission studies, which are now underway.

Leisawitz, David↗
NASA NTRS2002

SIM: An end-to-end simulation of the Space Interferometer Mission

We present the basic elements and first results of an end-to-end simulation package whose purpose is to test the validity of the Space Interferometer Mission design. The fundamental simulation time step is one millisecond, with substructure at 118 ms, and the total duration of the simulation is five years. The end product of a given wide-angle astrometry run is an estimated grid star catalog over the entire sky with an accuracy of about 4 micro-arcseconds.

SIM Space Interferometer Mission Space telescopes ↗
NASA NTRS2005

Polarization Considerations for the Laser Interferometer Space Antenna (LISA)

A polarization ray trace model of the Laser Interferometer Space Antenna's (LISA) optical path is being created. The model will be able to assess the effects of various polarizing elements and the optical coatings on the required picometer level interferometry. All of the computational steps are described in detail. This should eliminate any ambiguities associated with polarization ray trace modeling of interferometers and provide a basis for determining its limitations and serve as a clearly defined starting point for future improvements.

Waluschka, Eugene↗
NASA NTRSDate not supplied

Progress of the US Laser Development for the Laser Interferometer Space Antenna (LISA) Program

NASA Goddard Space Flight Center (GSFC) has been actively developing the laser transmitter for the Laser Interferometer Space Antenna (LISA) program since the late 2017. We have delivered a prototype laser transmitter to the LISA program for performance evaluationin 2021. We continued to further develop the LISA laser with a goal of advancing the technology readiness level (TRL) of the laser to 6 by the end of 2023. In this paper, we report on the progress we made on the laser development for the LISA program.

Space instrument↗
NASA NTRS2002

Preliminary Optimal Orbit Design for the Laser Interferometer Space Antenna (LISA)

In this paper we present a preliminary optimal orbit analysis for the Laser Interferometer Space Antenna (LISA). LISA is a NASA/ESA mission to study gravitational waves and test predictions of general relativity. The nominal formation consists of three spacecraft in heliocentric orbits at 1 AU and trailing the Earth by twenty degrees. This configuration was chosen as a trade off to reduce the noise sources that will affect the instrument and to reduce the fuel to achieve the final orbit. We present equations for the nominal orbit design and discuss several different measures of performance for the LISA formation. All of the measures directly relate the formation dynamics to science performance. Also, constraints on the formation dynamics due to spacecraft and instrument limitations are discussed. Using the nominal solution as an initial guess, the formation is optimized using Sequential Quadratic Programming to maximize the performance while satisfying a set of nonlinear constraints. Results are presented for each of the performance measures.

Hughes, Steven P.↗
NASA NTRS1999

A Rotating Space Interferometer with Variable Baselines and Low Power Consumption

A new concept is presented here for a large, rotating space interferometer which would achieve full u, v plane coverage with reasonably uniform integration times, yet once set in motion no additional energy would be required to change collector separations, maintain constant baseline rotation rates, or to counteract centrifugal forces on the collectors.

Gezari, Daniel Y.↗
NASA NTRS1998

LISA Mission Concept Study, Laser Interferometer Space Antenna for the Detection and Observation of Gravitational Waves

This document presents the results of a design feasibility study for LISA (Laser Interferometer Space Antenna). The goal of LISA is to detect and study low-frequency astrophysical gravitational radiation from strongly relativistic regions. Astrophysical sources potentially visible to LISA include extra-galactic massive black hole binaries at cosmological distances, binary systems composed of a compact star and a massive black hole, galactic neutron star-black hole binaries, and background radiation from the Big Bang. The LISA mission will comprise three spacecraft located five million kilometers apart forming an equilateral triangle in an Earth-trailing orbit. Fluctuations in separation between shielded test masses located within each spacecraft will be determined by optical interferometry which determines the phase shift of laser light transmitted between the test masses.

Folkner, W. M.↗
NASA NTRS2003

Investigation of Space Interferometer Control Using Imaging Sensor Output Feedback

Numerous space interferometry missions are planned for the next decade to verify different enabling technologies towards very-long-baseline interferometry to achieve high-resolution imaging and high-precision measurements. These objectives will require coordinated formations of spacecraft separately carrying optical elements comprising the interferometer. High-precision sensing and control of the spacecraft and the interferometer-component payloads are necessary to deliver sub-wavelength accuracy to achieve the scientific objectives. For these missions, the primary scientific product of interferometer measurements may be the only source of data available at the precision required to maintain the spacecraft and interferometer-component formation. A concept is studied for detecting the interferometer's optical configuration errors based on information extracted from the interferometer sensor output. It enables precision control of the optical components, and, in cases of space interferometers requiring formation flight of spacecraft that comprise the elements of a distributed instrument, it enables the control of the formation flying vehicles because independent navigation or ranging sensors cannot deliver the high-precision metrology over the entire required geometry. Since the concept can act on the quality of the interferometer output directly, it can detect errors outside the capability of traditional metrology instruments, and provide the means needed to augment the traditional instrumentation to enable enhanced performance. Specific analyses performed in this study include the application of signal-processing and image-processing techniques to solve the problems of interferometer aperture baseline control, interferometer pointing, and orientation of multiple interferometer aperture pairs.

Cheng, Victore H. L.↗