Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solvent effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Toward Lithium Recovery Using Modular (and Membraneless) Phase Separation and Extraction (MPSE) Technology with Ionic Liquid (IL) Solvents: Effect of Coatings

In this work, a single-channel slope-plate Modular and Membrane-less Phase Separation and Extraction (MPSE) device was fabricated using 3D printing. The slope-plate was designed with an insertable glass slide to enable surface modification with coatings. Self-assembled monolayers (SAMs) and perfluoropolyether (Zdol) coatings were applied to tailor surface wettability and enhance phase separation. Using a model biphasic system of water and hexadecane, both coatings significantly improved the separation efficiency compared to the uncoated device by promoting selective wetting. Building on these results, lithium extraction from a simulated saline solution was investigated using 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][NTf₂]) as the ionic liquid (IL) extractant. The IL effectively extracted Li⁺ from the aqueous phase in bulk extraction, demonstrating its potential for lithium recovery. However, the low interfacial tension between the IL and aqueous phases posed challenges for phase separation. The application of SAM and Zdol coatings effectively mitigated this issue. Overall, integrating tailored surface chemistry with the slope-plate MPSE design shows great promise as an efficient and scalable platform for studying liquid–liquid separation and optimizing ionic liquid–based extraction processes for lithium recovery from saline sources.

3D printing↗
NASA NTRS1992

Physical aging and solvent effects on the fracture of LaRC-TPI adhesives

When amorphous materials are quenched below their glass transition temperature, excess enthalpy is trapped in the glassy material because the viscosity is too great to allow the material to remain in volumetric equilibrium. Over time, this excess free volume is reduced as the material slowly approaches its equilibrium configuration. This process, known as physical aging, leads to substantial changes in the constitutive behavior of polymers, as has been widely discussed in the literature. Less is known about the effects of this physical aging process on fracture and fatigue properties of aged materials. The original goal of the summer was to investigate the effects of physical aging on the fracture and fatigue behavior of LaRC-TPI, a thermoplastic polyimide developed at NASA-Langley. Preliminary results are reported, although a lack of equipment availability prevented completion of this task. In the process of making specimens, the current LaRC-TPI was observed to be extremely susceptible to environmental stress cracking. A study of the unique failure patterns resulting from this degradation process in bonded joints was conducted and is also reported herein.

Dillard, David A.↗
DOE OSTI2025

Effect of Solvents on Lignin–Surface Interactions via Molecular Dynamics Simulations

Lignin, an essential building block of lignocellulosic biomass, is a potential abundant source of aromatic monomers for the polymer and chemical industry. Reductive catalytic fractionation (RCF) is one promising process that can produce high yields of phenolic monomers and oligomers from lignin under different catalytic conditions. An important choice in optimizing RCF is the selection of solvent; however, detailed insights into solvent effects on lignin behaviors and interactions remain limited. Here, in this work, we perform all-atom molecular dynamics simulations to study the solvation of lignin, solvent-mediated conformational changes, and the interaction of solvated lignin oligomers with model surfaces. We focus on the behavior of an oligomeric lignin model compound in methanol, ethanol, a binary mixture of ethanol and water, and water at both the RCF reaction temperature (473 K) and room temperature. Analysis of structural features of lignin suggests that these three organic solvent systems favorably solvate lignin, resulting in a more extended conformation suitable for catalytic conversion to valuable chemicals. We further introduce model palladium (Pd) and carbon (C) surfaces to understand how solvent choice impacts adsorption onto a representative catalytic surface and support, and to quantify the competition among the reactant and solvent molecules for the surface. Unbiased simulations suggest strong adsorption of lignin on both Pd and C surfaces at 473 K, with notable solvent-mediated differences in adsorption energies. Additionally, our findings indicate that lignin adsorption is promoted by the entropy change resulting from the displacement of solvent molecules from the surface. This study provides a molecular perspective of adsorption of lignin onto varying surfaces, which is a step towards understanding and optimizing the catalytic conversion of lignin into valuable chemicals.

adsorption↗
DOE OSTI2023

Effect of Solvent on the Interaction of Lignin with a Zeolite Nanosheet in the Condensed Phase

Lignin is the essential building block of lignocellulosic biomass, an excellent renewable source of different aromatic monomers for the polymer and biofuel industry. The depolymerization of lignin into value-added chemicals and fuels through the catalytic process poses a significant challenge due to the complex structure of lignin. Understanding lignin’s conformational diversity and dynamics in the liquid phase is crucial to designing an effective depolymerization process. Here, we conducted all-atom molecular dynamics simulations to understand the conformation and dynamics of softwood lignin on the all-silica zeolite nanosheet based on the MFI topology in a binary mixture of water–methanol at three different molar compositions (0%, 50%, and 100% methanol). We observed that the methanol–surface interaction is stronger than the water–surface interaction, and methanol readily diffused into the MFI core. Lignin surface contacts decrease with increasing methanol composition due to higher solubility and dynamics. Lignin dynamics on the surface in neat water is an order of magnitude smaller than methanol. Here, we also found that lignin adopts a slightly extended conformation when it stays on the surface than in the bulk solution phase for the pure water case, whereas for pure methanol and the binary solution structures are statistically similar.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Dependency of solvation effects on metal identity in surface reactions

Solvent interactions with adsorbed moieties involved in surface reactions are often believed to be similar for different metal surfaces. However, solvents alter the electronic structures of surface atoms, which in turn affects their interaction with adsorbed moieties. To reveal the importance of metal identity on aqueous solvent effects in heterogeneous catalysis, we studied solvent effects on the activation free energies of the O–H and C–H bond cleavages of ethylene glycol over the (111) facet of six transition metals (Ni, Pd, Pt, Cu, Ag, Au) using an explicit solvation approach based on a hybrid quantum mechanical/molecular mechanical (QM/MM) description of the potential energy surface. A significant metal dependence on aqueous solvation effects was observed that suggests solvation effects must be studied in detail for every reaction system. The main reason for this dependence could be traced back to a different amount of charge-transfer between the adsorbed moieties and metals in the reactant and transition states for the different metal surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Distillable amine-based solvents for effective pretreatment of multiple biomass feedstocks

Exploring the potential of advanced distillable solvents as efficient biomass pretreatment agents is critical for biorefineries, enhancing fermentable sugar yields while enabling solvent recovery and recycling without suffering significant losses. Here, we employ distillable amine-based solvents for pretreating a wide range of lignocellulosic feedstocks, aiming to facilitate the industrial release of fermentable sugars from diverse feedstocks through enzymatic hydrolysis. Twenty-two diverse feedstocks, sourced from different geographical regions and representing various biomass categories, were surveyed for chemical (mainly carbohydrates and lignin) and lignin (S, G, and H units) profiles. Several solvents, including ethanolamine, ethanolammonium acetate, butylamine, butylammonium acetate, and triethylamine, were tested for the pretreatment of eight selected biomasses. Among these solvents, butylamine emerged as the most effective due to its favorable sugar release, excellent solvent removal rate, and low boiling point, facilitating solvent recovery and recycling. Extending butylamine pretreatment to all 22 feedstocks demonstrated desirable sugar yields and highly efficient solvent removal in the majority of the biomass sources tested. Agricultural residues and their mixtures showed particularly favorable sugar release. Despite minimal changes in cellulose crystallinity, XRD characterization of sorghum, poplar, and pine before and after butylamine pretreatment showed a decrease in intensity and a slight shift of certain peaks, indicating alterations in cellulose structure. Fourier-transform infrared spectroscopy and thermogravimetric analysis analyses suggested disruption of biomass linkages in hemicellulose and lignin, enhancing enzymatic digestibility. Scale-up experiments of the mixed agricultural feedstocks in a 1 L Parr reactor achieved over 90% glucose liberation and more than 99% butylamine removal, highlighting the scalability of the method. The resulting hydrolysates supported the growth of diverse bacterial and fungal strains, indicating downstream compatibility with commercial fermentation processes. This study presents butylamine as an effective, recoverable pretreatment solvent for a wide range of lignocellulosic feedstocks, offering a promising solution to key biorefinery challenges. The demonstrated scalability and compatibility with various biomass types and blends underscore its potential for industrial application, advancing sustainable biofuel and biochemical production.

biomass composition↗
DOE OSTI2021

Recovery of Cathode Materials and Aluminum Foil Using a Green Solvent

Effective separation of cathode materials and current collectors is one of the most enabling steps, yet a very challenging step, in recycling electrode scraps and spent Li-ion cells. Here, a green solvent, triethyl phosphate, was used to recover invaluable cobalt-containing cathodes, such as NMC622, by dissolving the polymeric binder of poly(vinylidene fluoride). Electrochemically active materials were separated from cathode scraps collected at the manufacturing step of electrodes through a solvent-based separation method without jeopardizing their physical characteristics, crystalline structure, and electrochemical performance. In this work, we found that the recovered aluminum foils were clean without any sign of corrosion and that the polymeric binder could be recovered via a non-solvent-induced phase separation. Additionally, recovery of cathode materials from spent cells was achieved using refined separation parameters based on the recycling of cathode scraps. It is anticipated that this green solvent-based separation for cathode recovery will attract significant interest by the lithium-ion battery manufacturing and recycling communities.

25 ENERGY STORAGE↗
DOE OSTI2026

Hydrogen Adsorption over Transition Metals in Water

The adsorption free energy of atomic hydrogen on Pt(111), Pd(111), Ni(111), Ru(0001), Cu(111), and Rh(111) in liquid water was computed using a quantum mechanical/molecular mechanical free-energy perturbation scheme. The Pt(111) computations indicate that the solvent effect on H adsorption on atop sites (+0.20 eV) is almost twice that on fcc (+0.12 eV), showing it is less likely to find adsorbed hydrogen in atop position in the presence of water than in the gas phase. The solvent effect for the fcc site, which is the most favorable site for adsorbed H on Pt(111), agrees qualitatively with experimental work by Lercher et al., who reported an effect of +0.2 eV. Overall, an endergonic solvent effect for hydrogen adsorption is observed for all metals, indicating a lower hydrogen coverage relative to free site coverage at metal-water interfaces compared to metal-gas interfaces, even when hydrogen transport effects through the fluid phase are negligible; a result with important implications for (de)hydrogenation catalysis.

Zare, Mehdi↗
DOE OSTI2026

Data-Driven Discovery and Experimental Validation of Solvent Polarity Effects on Conjugated Polymer Solution-to-Film Assembly Pathways

Understanding how solvent properties influence the solution-to-film assembly of conjugated polymers remains a critical challenge due to the complex and intertwined nature of polymer–solvent interactions. In this study, we integrate a data-driven framework with experimental validation to identify key parameters influencing the assembly and performance of poly[2,5-(2-octyldodecyl)-3,6-diketopyrrolopyrrole-alt-5,5-(2,5-di(thien-2-yl)thieno[3,2-b]thiophene)] (DPP-DTT) in organic field-effect transistors (OFETs). A machine learning (ML) approach identified the normalized Reichardt polarity parameter (E T N ) as a significant descriptor correlated with DPP-DTT hole mobility (μ). Systematic DPP-DTT devices fabricated using solvents across a wide E T N range revealed that higher E T N solvents yield enhanced μ. To elucidate the structural origins of high μ, we conducted comprehensive analyses using UV–vis–NIR spectroscopy and grazing incidence wide angle X-ray scattering (GIWAXS) measurements. The results revealed that films processed from high E T N solvents exhibit reduced paracrystallinity. By analyzing the solution-state behavior using optical microscopy and solution WAXS, we revealed polymer solubility differences in the various solvents and associated distinct polymer assembly pathways, elucidating why the high E T N solvent produces long-range ordered films. Notably, the high E T N solvent shows a pronounced preference for liquid-crystal (LC)-mediated assembly, providing a mechanistic explanation for the enhanced structural order. Therefore, these results demonstrate that solvent polarity, as evaluated by E T N , serves as an important parameter that plays a significant role in the DPP-DTT assembly pathway and resultant solid-state morphology. This work provides a strategy for integrating data science with experiments to identify critical parameters associated with complex polymer systems and helps guide rational process design for high-performance organic electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Alkali-facilitated deep eutectic solvent for effective bamboo saccharification

In this report, a Na 2 S promoted deep eutectic solvent (DES) was established to reduce the natural recalcitrance of moso bamboo (MB) and improve the subsequent enzymatic saccharification. It was found that the addition of Na 2 S (Choline chloride/Ethylene glycol/Na 2 S) dramatically promoted the deconstructions of lignin with highest removal of 74.67 %, but at the same time preserved glucan and hemicellulose to the maximum extent. With the fractionation, the enzymatic saccharification yield of pretreated MB can reach 100 % under the pretreatment condition of 140 °C, and lignin could be readily recovered with a high yield of 81.47 %. The proposed DES is superior to normal alkaline DES in terms of the higher lignin removal and recovery yield, carbohydrate preservation and enzymatic digestibility, which indicated Na 2 S as a novel and powerful reinforcer enhancing the DES fractionation efficiency.

09 BIOMASS FUELS↗
DOE OSTI2020

N -Arylimide Molecular Balances: A Comprehensive Platform for Studying Aromatic Interactions in Solution

Noncovalent interactions of aromatic surfaces play a key role in many biological processes and in determining the properties and utility of synthetic materials, sensors, and catalysts. However, the study of aromatic interactions has been challenging because these interactions are usually very weak and their trends are modulated by many factors such as structural, electronic, steric, and solvent effects. Recently, N-arylimide molecular balances have emerged as highly versatile and effective platforms for studying aromatic interactions in solution. These molecular balances can accurately measure weak noncovalent interactions in solution via their influence on the folded–unfolded conformational equilibrium. The structure (i.e., size, shape, π-conjugation, and substitution) and nature (i.e., element, charge, and polarity) of the π-surfaces and interacting groups can be readily varied, enabling the study of a wide range of aromatic interactions. These include aromatic stacking, heterocyclic aromatic stacking, and alkyl–π, chalcogen–π, silver–π, halogen–π, substituent–π, and solvent–π interactions. The ability to measure a diverse array of aromatic interactions within a single model system provides a unique perspective and insights as the interaction energies, stability trends, and solvent effects for different types of interactions can be directly compared. Some broad conclusions that have emerged from this comprehensive analysis include: (1) The strongest aromatic interactions involve groups with positive charges such as pyridinium and metal ions which interact with the electrostatically negative π-face of the aromatic surface via cation–π or metal–π interactions. Attractive electrostatic interactions can also form between aromatic surfaces and groups with partial positive charges. (2) Electrostatic interactions involving aromatic surfaces can be switched from repulsive to attractive using electron-withdrawing substituents or heterocycles. These electrostatic trends appear to span many types of aromatic interactions involving a polar group interacting with a π-surface such as halogen–π, chalcogen–π, and carbonyl–π. (3) Nonpolar groups form weak but measurable stabilizing interactions with aromatic surfaces in organic solvents due to favorable dispersion and/or solvophobic effects. Furthermore, a good predictor of the interaction strength is provided by the change in solvent-accessible surface area. (4) Solvent effects modulate the aromatic interactions in the forms of solvophobic effects and competitive solvation, which can be modeled using solvent cohesion density and specific solvent–solute interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗