SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Experimetnal fabrication process makes submicron-sized structures of single-crystal metallic CoSi2 on silicon substrates. Amorphous Co:Si(1:2) crystallized by electron beam becoming single-crystal CoSi2. Remaining amorphous Co:Si then preferentially etched away. When fully developed, process used to make fine wires or dots exhibiting quantum confinement of charge carriers.
Pinhole-free epitaxial CoSi.sub.2 films (14') are fabricated on (111)-oriented silicon substrates (10) with a modified solid phase epitaxy technique which utilizes (1) room temperature stoichiometric (1:2) codeposition of Co and Si followed by (2) room temperature deposition of an amorphous silicon capping layer (16), and (3) in situ annealing at a temperature ranging from about 500.degree. to 750.degree. C.
Eu 2 In and Eu 2 Sn crystallize in the orthorhombic Co 2 Si-type structure (oP12, Pnma, No. 62) with In and Sn atoms occupying one 4c site and the Eu atoms filling two other 4c sites. Eu 2 In has a nearly ideal first-order magnetostructural transition (FOMT) at 55 K with a hysteresis of less than 0.1 K, a large entropy change and an adiabatic temperature change of 5.0 K in a field of 2 T. The anhysteretic nature of the FOMT is likely due to there being no change in cell symmetry and relatively small changes in the lattice parameters. There is no magnetostructural transition in Eu2Sn. In this work we present the results of powder neutron diffraction, magnetization, and Eu Mössbauer spectroscopy aimed to investigate the nature of magnetic order for both Eu 2 In and Eu 2 Sn. The Eu Mössbauer spectrum of Eu 2 In at 5 K shows two equal area components, consistent with Eu occupying two equal multiplicity crystallographic sites. However, the different hyperfine fields (B) of 27 T and 17 T suggest that the magnetic environments of the Eu moments on the two 4c sites are different. Neutron diffraction data at 2.5 K show that in Eu 2 In the order is ferromagnetic, with Eu moments on both Eu sites oriented parallel to the a-axis; moment values of 6.8 μB and 6.5 μB were found. For Eu 2 Sn measurements find two antiferromagnetic transitions, which are corroborated by neutron diffraction. Analysis of density-functional theory calculations shows negligible energy difference between differing magnetic configurations, indirectly supporting stability of multiple magnetic structures observed experimentally. While the transition at T N1 = 30 K corresponds to the formation of a simple k 1 = 0 antiferromagnetic structure with Eu-moments pointing along the b-axis, at T N2 = 13 K a coexisting second magnetic order with k 2 = [0, ½, ½] appears.
Optical manipulation of magnetism holds promise for future ultrafast spintronics, especially with lanthanides and their huge, localized 4 f magnetic moments. These moments interact indirectly by spin polarizing the conduction electrons (the Ruderman-Kittel-Kasuya-Yosida exchange interaction), influenced by interatomic orbital overlap, and the conduction electron's susceptibility around the Fermi level. Here, we study this influence in a series of 4 f antiferromagnets, Gd T 2 Si 2 ( T = Co, Rh, Ir), using ultrafast resonant x-ray diffraction. We observe a twofold increase in the ultrafast intersublattice angular momentum transfer rate between the materials, originating from modifications in the conduction electron susceptibility, as confirmed by first-principles calculations. Published by the American Physical Society 2024
The Fe-S system was explored in a laser-heated diamond-anvil cell at 89(2) GPa and 2380(120) K to better understand the phase stability of Fe 2 S. Upon temperature quenching, crystallites of Fe 2 S were identified, and their structure was investigated using single-crystal X-ray diffraction techniques. At these conditions, Fe 2 S adopts the C23 structure (anti-PbCl 2 , Co 2 P) with space group Pnma (Z = 4). This structure consists of columns of corner-sharing, FeS 4 tetrahedra, and columns of edge-sharing FeS 5 square pyramids linked along edges in the b direction. Sulfur is in ninefold coordination with Fe. This work marks the first high-pressure structural solution and refinement of Fe 2 S synthesized in a multigrain Fe+FeS sample at 90 GPa and 2400 K and establishes the stability of C23 Fe 2 S at these conditions. A previous powder diffraction study reports an orthorhombic Fe 2 S phase with a C37, Co 2 Si-like unit cell above 190 GPa. A C23–C37 structural transition is inferred to explain the previously observed unit-cell parameters at higher pressures and temperatures. These results highlight the utility of applying single-crystal X-ray diffraction techniques to high P-T multigrain samples to explore the structural properties of iron-rich phases in Earth and planetary cores.
Amorphous Co:Si (1:2 ratio) films are electron gun-evaporated on clean Si(111), such as in a molecular beam epitaxy system. These layers are then crystallized selectively with a focused electron beam to form very small crystalline Co/Si2 regions in an amorphous matrix. Finally, the amorphous regions are etched away selectively using plasma or chemical techniques.
The zinc hydride compound, [Tptm]ZnH, may achieve the reduction of CO 2 by (RO) 3 SiH (R = Me, Et) to the methanol oxidation level, (MeO) x Si(OR) 4–x , via the formate species, HCO 2 Si(OR) 3 . Furthermore, because insertion of CO 2 into the Zn–H bond is more facile than insertion of HCO 2 Si(OR) 3 , conversion of HCO 2 Si(OR) 3 to the methanol level only occurs to a significant extent in the absence of CO 2 .
Abstract Silicon (Si) is an important material for alloying, solar photovoltaics, and electronics. However, current methods of producing silicon require energy consumption of around 11–13 kWh/kg Si and direct carbon emissions are 4.7–5 tons CO 2 per ton Si which conflicts with global efforts to limit climate change. In this work, we discuss several promising methods for reducing or eliminating carbon emissions from the silicon production process. Such methods include using biocarbon, integrating the current process with carbon capture and utilization/storage (CCU/CCS), metallothermic reduction, hydrogen reduction, and molten salt electrolysis. We present the positive aspects and challenges of each approach. Biocarbon coupled with CCU/CCS is the most industrially mature technology and can be carbon–neutral or -negative but is not carbon-free. Hydrogen directly reducing silicon dioxide is not thermodynamically favorable, but it may be viable to use hydrogen in conjunction with other processes to reduce emissions. Metallothermic and electrochemical methods of production are promising and have the potential to create high-purity silicon with no reduction-related carbon emissions but have only been demonstrated at lab scale. Economic viability will likely be the next determining factor for which technologies are more widely researched and implemented. Graphical Abstract
Polyoxometalate (POM) supramolecular gels are a growing family of materials, both for understanding fundamental self-assembly and fabricating flexible monolithic materials that retain the function of metal oxides. Here, we exploited the pH-dependent speciation of polyoxoniobates (PONbs), targeting the formation of PONb-containing supramolecular gels that contain other low molecular weight components (silicate, germanate, phosphate, and carbonate). The introduction of gaseous CO 2 into aqueous hexaniobate solutions resulted in the formation of both new crystalline phases and highly transparent gels. The crystalline phases, formulated Cs 24 [Nb 7 O 22 (NbO(CO 3 ) 2 ) 9 (Si 3 O 9 )]·19.6H 2 O and Cs 21 Na 3 [Nb 7 O 22 (NbO(CO 3 ) 2 ) 9 (Ge 3 O 9 )]·33.6H 2 O are templated by a rare planar [X 3 O 9 ] 6− (X = Si, Ge) ring. Crystalline phases were not obtained with phosphate; instead, the gels contain a mixture of phosphate-centred PONbs and network-forming phosphate. POM speciation within the gels, physical properties, and assembly mechanisms were benchmarked by solution and solid-state nuclear magnetic resonance (NMR) spectroscopy, vibrational spectroscopies, small-angle X-ray scattering (SAXS), and thermogravimetry-mass spectroscopy. Optical analysis and dielectric behavior of the gels confirmed that they are highly transparent ionic and electronic conductors. The alkali and hydroxide concentration controls the formation of crystalline materials or supramolecular gels while maintaining the same network building blocks, providing a rare opportunity to describe the molecular-level structure of inorganic amorphous materials.
High loadings of Cu were integrated on the light-facing side of Si microwire arrays used under simulated sunlight for the photoelectrochemical reduction of CO 2 (aq) to hydrocarbons in 0.10 M KHCO 3 (aq). Radial-junction n + p-Si microwire arrays decorated with Cu exhibited absolute photocurrent densities comparable to an uncovered Si surface. Moreover, with respect to a Cu foil electrode, the positive shift in the onset potential for hydrocarbon formation at n + p-Si/Cu microwire arrays was equal to or greater than the photovoltage of the semiconductor alone. Selective electrodeposition of Cu on the tips and sidewalls of Si microwires was responsible for the minimal parasitic reflection and absorption exhibited by the catalyst, such that light-limited, absolute current densities >25 mA·cm –2 were sustained for 48 h under simulated sunlight. Photoelectrodes prepared from semiconductors with low diode quality factors and electrocatalysts with large Tafel slopes are shown to benefit from increased microstructured surface area. Si microwire arrays are thus suitable for photoelectrochemical reactions requiring high loadings of metallic and reflective electrocatalysts.
Abstract As for plants, far‐red (FR) light with wavelength from 700 nm to 740 nm is critical for processes of photosynthesis and photomorphogenesis. Light‐controlled development depends on light to control cell differentiation, structural and functional changes, and finally converge into the formation of tissues and organs. Phosphor converted FR emission under LED excitation is a cost‐effective and high‐efficient way to provide artificial FR light source. With the aim to develop an efficient FR phosphor that can promote the plant growth, a series of gadolinium yttrium gallium garnet (GYGAG) transparent ceramic phosphors co‐doped with Mn 2+ and Si 4+ have been fabricated via chemical co‐precipitation method, followed sintered in O 2 and hot isostatic pressing in this work. Under UV excitation, the phosphor exhibited two bright and broadband red emission spectra due to Mn 2+ : 4 T 1 → 6 A 1 spin‐forbidden transition, and one of which located in the right FR region. And then, Ce 3+ ions were co‐doped as the activator to enhance the absorption at blue light region and the emission of Mn 2+ . It turns out that the emission band of GYGAG transparent ceramic phosphors matches well with the absorption band of phytochrome P FR , which means they are promising to be applied in plant cultivation light‐emitting diodes (LEDs) for modulating plant growth. Besides, the thermal stability of this material was investigated systematically, and an energy transferring model involves defects was also proposed to explain the phenomenon of abnormal temperature quenching.
Density-functional theory based molecular-dynamics simulations were used to investigate high-pressure chemical reactions in liquid mixtures of CO 2 with several elements (Si, Mn, and Fe) at high temperatures of 2000-3000 K. Our ab initio simulations indicate that these reactant elements can reduce CO 2 to C at high pressures (20 GPa) leading to the formation of C-C chains, with Si by far the most effective carbon-reducing agent. A combined chemical analysis using Bader charge analysis and Crystal Orbital Hamilton Population (COHP) on simulation snapshots shows that significant charge transfer from the reducing element to the C atoms creates instability in the C-O covalent bonds. COHP analysis further shows that Mn/Fe-O and Mn/Fe-C bonding interactions are weaker compared to the Si counterparts. These results further our understanding of the redox chemistry of CO 2 at conditions relevant to planetary mantle interiors and demonstrate the effectiveness of high pressure in the reduction of CO 2 directly to solid carbon.
Discovery of interstellar Ge, Ga, and Kr is reported. Several intercombination lines of Fe 2 are detected. The depletion is most pronounced in Ca, Ti, and V. The highly ionized gas C 4 and Si 4 is not co-extensive with the Si 2 and C 2 gas nor with the O 6 gas. The molecular gas (CO) shows very small velocity dispersion (b approximately 1 km/sec). HD 149404 has the richest interstellar spectrum (except molecules) of all the stars in this study. HD 147889, the heavily obscured star in the Rho Oph cloud, has the strongest interstellar CO spectrum. Noisy nature of the spectra precludes detection of other molecules.
We installed molecular CO 2 reduction (CO 2 R) catalysts directly onto Si (photo)electrodes. The highly reactive M(5-azido-1,10-phenanthroline)(CO) 3 X (where M = Mn or Re, X = Br or Cl) complexes readily bubbled when dissolved in polar organic solvents, in both the presence and absence of an ultraviolet light source. When placed on hydrogen-terminated Si (H-Si) and native silicon oxide (SiOx), similar amounts of the complex were attached to the surface under illumination (367 nm, 50–200 mW/cm 2 ) or in the dark. Surprisingly, these films revealed submonolayer coverages instead of the multilayered structures we expected. DFT analyses support monolayer formation, showing that the triplet-state nitrene of the complex is more energetically favorable than the singlet state. Using controlled-potential electrolysis experiments, we showed that Re- and Mn-containing films on pSi photoelectrodes generated small amounts of CO when exposed to 1 atm of CO 2 and 1 sun illumination. These amounts of CO were an order of magnitude greater than control surfaces, producing 5.59 × 10 –7 mol CO/h for Re(az-phen) and 7.83 × 10 –7 mol CO/h for Mn(az-phen) films. Much of the charge passed at the pSi electrodes was consumed by the competing hydrogen evolution reaction, which we attribute to the low molecular coverage and the presence of native oxide on the electrode surface after attachment. Finally, this work demonstrates the feasibility of reacting azide-containing ligands with Si surfaces. Still, it highlights the need for alternative ligand structures and reaction conditions to form multilayer films.
Methyl-terminated p-type silicon photoelectrodes selectively drive CO 2 reduction by a homogeneous [Ru(tpy)(Mebim-py)(NCCH 3 )] 2+ catalyst (tpy = 2,2′:6′,2″-terpyridine, Mebim-py = 1-methylbenzimidazol-2-ylidene-3-(2′-pyridine)). A 460 mV photovoltage is quantified for the photoelectrode. Under 1 sun illumination, this system achieves a Faradaic efficiency of 87% for CO at −1.7 V vs Fc +/0 , matching reports of the same catalyst at metallic electrodes operating at −2.1 V. When 5% water is introduced, the CH 3 -terminated Si photoelectrode remains stable, selectivity for CO is retained, and current density increases. Methyl termination suppresses the competitive hydrogen evolution observed for H-terminated Si photoelectrodes, which under the same conditions produce ca. 60% CO and 8% H 2 and have unstable performance. Furthermore, these results establish that a semiconductor photoelectrode can power a molecular CO 2 reduction catalyst without hydrogen evolution by the photoelectrode itself. Methyl termination of p-Si allows CO 2 reduction to kinetically outcompete proton reduction, revealing an important design principle for selective fuel formation.
Our editorial advisory board members Kai Zhu, Dongling Ma, and Shannon W. Boettcher provide highlights of three articles published in the August issue. They highlight new advances in solar cells and solar fuels that include phenethylammonium iodide treatment on suppressing ion migration in perovskite solar cells, nitride heterostructures for water splitting, and three-dimensional electrode (Si microarray) for CO 2 reduction.
Magnetic skyrmions are topologically protected, nanoscale whirls of the spin configuration that tend to form hexagonally ordered arrays. As a topologically non-trivial structure, the nucleation and annihilation of the skyrmion, as well as the interaction between skyrmions, varies from conventional magnetic systems. Recent works have suggested that the ordering kinetics in these materials occur over millisecond or longer timescales, which is unusually slow for magnetic dynamics. The current work investigates the skyrmion ordering kinetics, particularly during lattice formation and destruction, using time-resolved small angle neutron scattering (TR-SANS). Evaluating the time-resolved structure and intensity of the neutron diffraction pattern reveals the evolving real-space structure of the skyrmion lattice and the timeframe of the formation. Measurements were performed on three prototypical skyrmion materials: MnSi, (Fe,Co)Si, and Cu 2 OSeO 3 . To probe lattice formation and destruction kinetics, the systems were prepared in the stable skyrmion state, and then a square-wave magnetic field modulation was applied. The measurements show that the skyrmions quickly form ordered domains, with a significant distribution in lattice parameters, which then converge to the final structure; the results confirm the slow kinetics, with formation times between 10 ms and 99 ms. Comparisons are made between the measured formation times and the fundamental material properties, suggesting the ordering temperature, saturation magnetization and magnetocrystalline anisotropy may be driving the timeframes. Micromagnetic simulations were also performed and support a scaling of the kinetics with sample volume, a behavior which is caused by the reconciling of misaligned domains.