Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shock structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High-Fidelity Analysis of ULF Wave Mode Structure Following Interplanetary Shock Compression of the Dayside Magnetopause Using MMS Multi-Point Observations

During the 9 March 2018 event with two consecutive interplanetary shocks compressing the dayside magnetosphere, the azimuthal mode structure and frequency spectrum of ultra low frequency magnetic pulsations are resolved using a cross-spectral analysis based on high-fidelity multi-probe Magnetospheric Multiscale Mission (MMS) magnetometer data. The results based on the MMS 4 and MMS 3 pair of measurements show that shock arrival leads to low mode (|m| ≤ 3) magnetic fluctuations in the Pc4-5 regimes, and smaller spatial scale fluctuations implied by the dominant high mode numbers are observed after both shock signatures hit and passed the magnetosphere. Detailed evolution of the mode structure is also shown for the first shock to reveal the development of high mode structure from a bump-on-tail distribution at m≈20 to a dominant peak at m≈50 in about 10 min. In addition, an interesting change of sign in m from negative to positive is observed as MMS crosses ~11 MLT pre-noon, which is consistent with the picture of wave generation by dayside magnetopause compression and then anti-sunward propagation. Finally, for both shocks, the contribution of higher frequency waves (Pc-4 range compared with Pc-5) to the total wave power is found to be negligible before and after the shock impact, but it becomes more significant during the shock impact.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Fully kinetic simulations of strong steady-state collisional planar plasma shocks

We report on simulations of strong, steady-state collisional planar plasma shocks with fully kinetic ions and electrons, independently confirmed by two fully kinetic codes (an Eulerian continuum and a Lagrangian particle-in-cell). While kinetic electrons do not fundamentally change the shock structure as compared with fluid electrons, we find an appreciable rearrangement of the preheat layer, associated with nonlocal electron heat transport effects. The electron heat-flux profile qualitatively agrees between kinetic- and fluid-electron models, suggesting a certain level of “stiffness,” though substantial nonlocality is observed in the kinetic heat flux. We also find good agreement with nonlocal electron heat-flux closures proposed in the literature. Finally, in contrast to the classical hydrodynamic picture, we find a significant collapse in the “precursor” electric-field shock at the preheat layer leading edge, which correlates with the electron-temperature gradient relaxation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Multimessenger measurements of the static structure of shock-compressed liquid silicon at 100 GPa

The ionic structure of high-pressure, high-temperature fluids is a challenging theoretical problem with applications to planetary interiors and fusion capsules. Here we report a multimessenger platform using velocimetry and angularly and spectrally resolved x-ray scattering to measure the thermodynamic conditions and ion structure factor of materials at extreme pressures. We document the pressure, density, and temperature of shocked silicon near 100 GPa with uncertainties of 6%, 2%, and 20%, respectively. The measurements are sufficient to distinguish between and rule out some ion screening models. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Towards understanding the development and characteristics of under-expanded flash boiling jets

Here in this research, the n-hexane jets discharged from a straight channel were studied numerically to reveal the development and characteristics of under-expanded flashing jets. Firstly, the development of flash boiling jets was investigated and compared to that of two-phase jets without phase transition. It was shown that the two-phase jets without phase transition can be under-expanded only if the flow is choked. In contrast, flash boiling jets can be under-expanded whether or not the choked conditions are verified. Secondly, the factors affecting the flashing jet behaviors were discussed. The relaxation time in phase transition, the expansion ratio, and the injection pressure have been identified as three key factors determining the jet characteristics. With high enough expansion ratio and low enough relaxation time, the expansion was so strong that the flow became transonic and shock structures similar to those of under-expanded gaseous jets appeared near the orifice exit. Finally, two types of choking have been identified for flash boiling jets, i.e., vaporization-induced choking and expansion-induced choking. The former one is mainly ascribed to the vapor formation in the orifice which reduces the local speed of sound, while the latter one is due to the expansion of under-expanded two-phase flow and the resultant flow acceleration.

42 ENGINEERING↗
DOE OSTI2024

Formation of a spherical plasma liner for plasma-jet-driven magneto-inertial fusion

Plasma-jet-driven magneto-inertial fusion is an alternative approach to controlled nuclear fusion, which aims to utilize a line-replaceable dense plasma liner as a repetitive spherical compression driver. In this experiment, first measurements of the formation of a spherical argon plasma liner formed from 36 discrete pulsed plasma jets are obtained on the Plasma Liner Experiment. Properties including liner uniformity and morphology, plasma density, temperature, and ram pressure are assessed as a function of time throughout the implosion process and indicate an apparent transition from initial kinetic inter-jet interpenetration to collisional regime near stagnation times, in accordance with theoretical expectation. A lack of primary shock structures between adjacent jets during flight implies that arbitrarily smooth liners may be formed by way of corresponding improvements in jet parameters and control. The measurements facilitate the benchmarking of computational models and understanding the scaling of plasma liners toward fusion-relevant energy density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Post-detonation fireball modeling: Validation of freeze out approximations

A numerical simulation study was performed to examine the post-detonation reaction processes produced by the detonation of a 12 mm diameter hemispherical pentaerythritol tetranitrate (PETN) explosive charge. The simulations used a finite rate detailed chemical reaction model consisting of 59 species and 368 reactions to capture post-detonation reaction processes including air dissociation from Mach 19+ shock waves that initially break out of the PETN charge, reactions within the detonation products during expansion, and afterburning when the detonation products mix with the shock heated air. The multi-species and thermodynamically complete Becker-Kistiakowsky-Wilson real-gas equation of state is used for the gaseous phase to allow for the mixing of reactive species. A recent simplified reactive burn model is used to propagate the detonation through the charge and allow for detailed post-detonation reaction processes. The computed blast, shock structures, and mole fractions of species within the detonation products agree well with experimental measurements. A comparison of the simulation results to equilibrium calculations indicates that the assumption of a local equilibrium is fairly accurate until the detonation products rapidly cool to temperatures in the range of 1500-1900 K by expansion waves. Below this range, the computed results show mole fractions that are nearly chemically frozen within the detonation products for a significant portion of expansion. In conclusion, these results are consistent with the freeze out approximation used in the blast modeling community.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

High-Fidelity, Low-Dissipation/Symmetry-Preserving Numerical Scheme for Solving the Euler Equations with Unstructured, Metric-Based Mesh Adaptation

This work presents an overview of a high-fidelity compressible Euler solver that utilizes the continuous Galerkin (CG) method with added artificial numerical diffusion for stabilization to solve a variety of unsteady and steady benchmark inviscid flow problems. This work shows that discretizing the Euler equations with this CG approach and first order basis functions produces a cost-effective stencil as well as simple well-posed boundary conditions. We show through convergence testing with manufactured solutions that the reduced stencil of CG, combined with the low amount of artificial diffusion required when using the stabilization method outlined in this work, leads to stable and highly accurate results for a variety of unsteady and steady applications. When combined with the adaptive mesh refinement approach used for many of the cases in this work, our results show that the flow solver achieves even more accurate results. A variety of inviscid flow cases are presented in this work, including transient 2D cases with complex shock structures and several steady 3D airfoils sections with a constant span.

Doetsch, Kevin [ORNL] (ORCID:0000000267051705)↗
DOE OSTI2022

Ultrafast structural response of shock‐compressed plagioclase

Abstract Meteor impacts can induce unique pressure‐dependent structural changes in minerals due to the propagation of shock waves. Plagioclase—ubiquitous throughout the Earth’s crust, extraterrestrial bodies, and meteorites—is commonly used for reconstructing the impact history and conditions of the parent bodies. However, there have been unresolved inconsistencies in the interpretation of shock transformations across previous studies: The pressure at which amorphization begins and the process by which it occurs is the subject of ongoing debate. Here, we utilize time‐resolved in situ X‐ray diffraction (XRD) to probe the phase transformation pathway of plagioclase during shock compression at a sub‐nanosecond timescale. Direct amorphization begins at pressures much lower than what was previously assumed, just above the Hugoniot elastic limit of 5 GPa, with full amorphization to a high‐density amorphous phase, observed at 32(10) GPa and 20 ns. Upon release, the material partially recrystallizes back into the original structure, demonstrating a memory effect.

58 GEOSCIENCES↗
DOE OSTI2023

Structures of strong shocks in low-density helium and neon gases

Strong shocks are essential components in many high-energy-density environments such as inertial confinement fusion implosions. However, the experimental measurements of the spatial structures of such shocks are sparse. In this paper, the soft x-ray emission of a shock front in a helium gas mixture (90% helium, 10% neon) and a pure neon gas was spatially resolved using an imaging spectrometer. We observe that the shock width in the helium mixture gas is about twice as large as in the pure neon gas. Moreover, they exhibit different precursor layers, where electron temperature greatly exceeds ion temperature, extending for more than ~350 µm with the helium gas mixture but less than 30 µm in the pure neon. At the shock front, calculations show that the electrons are strongly collisional with mean-free path two orders of magnitude shorter than the characteristic length of the shock. However, the helium ions can reach a kinetic regime as a consequence of their mean-free path being comparable to the scale of the shock. A radiation-hydrodynamic simulation demonstrates the impact of thermal conduction on the formation of the precursors with charge state, Z, playing a major role in heat flow and the precursor formation in both the helium mixture and the pure neon gases. Particle-in-cell simulations are also performed to study the ion kinetic effects on the formation of the observed precursors. A group of fast-streaming ions is observed leading the shock only in the helium gas mixture. Additionally, both effects explain the longer precursor layer in the helium shock.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Solitary Magnetic Structures at Quasi–Parallel Collisionless Shocks: Formation

Solitary magnetic structures known as SLAMS (short large-amplitude magnetic structures) have been considered as essential elements of collisionless shocks with quasi-parallel geometries. Yet the physics underlying their formation remains an open question. In this paper, we use measurements from the magnetospheric multiscale mission combined with fully kinetic simulations to study the formation of SLAMS. We find that gyro-resonance between solar wind ions and right-hand circularly polarized electromagnetic waves results in magnetic field amplification. Gyro-trapping by the growing magnetic field builds up the plasma density that further enhances the current and field. The solitary nature of SLAMS stems from a beat-like magnetic field envelope where the maximum sets the initial location for nonlinear growth. Our results present a conceptual advance on SLAMS, and may shed new light on the open question of magnetic field amplification at astrophysical shocks.

58 GEOSCIENCES↗
DOE OSTI2020

A description of structured waves in shock compressed particulate composites

Dynamic compression of composite materials is of scientific interest because the mechanical mismatch between internal phases challenges continuum theories. Typical assumptions about steady wave propagation and quasi-instantaneous state changes require reexamination along with the need for time-dependent models. To that end, data and models are presented here for the shock compression of an idealized particulate composite. To serve as a generic representative of this material class, a polymer matrix was filled with tungsten particles, ranging from 1 to 50 vol. %. This creates a simple microstructure containing randomly scattered particles with an extreme impedance mismatch to the binding matrix. These materials were parallel plate impact loaded by Al flyers traveling at 1.8–5.0 km/s. Velocimetry provided records of the equilibrium state and the compression wave structure for each case with trends quantified by an empirical fit. The same quantities were also studied as a function of the wave's propagation distance. A homogenized viscoelastic model then made it possible to progress from cataloging trends to making predictions. Starting from a Mie–Gruneisen equation of state, additional time varying terms were added to capture the transient response. After calibration, accurate predictions of the steady wave structure were possible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Finite scale theory: Predicting nature’s shocks

In this paper, we describe a continuum model that accurately reproduces the experimentally measured structure of physical shocks in a perfect gas. In this work, we begin by presenting a history of shock structure research, theoretical, experimental and numerical, to quantify the significant discrepancies between Navier–Stokes predictions and laboratory measurements. In our first main result, we discuss modifications that generalize the Chapman–Enskog approximation and lead to a new continuum model termed the Finite Scale Equations. In our second main result, we use this continuum model to calculate shock structure with results comparable in accuracy to numerical simulations based on the Boltzmann equation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Demonstration of CFD to support the coupled analysis of a reactor pressure vessel subjected to pressurized thermal shock

The structural components that comprise nuclear reactors and their supporting structures are subjected to harsh operating environments that can challenge their integrity, especially after exposure for extended duration or under accident condition. As one of the most significant components of a reactor, the Reactor Pressure Vessel (RPV) is exposed to an aggressive environment during the operation time (e.g. more than 40 years). Aging degradation mechanisms (e.g. thermo-fatigue) could grow initial defects up to a critical size, increasing the susceptibility to failure in the RPV. The conventional methods are mostly based on simple crack and structure geometries. Very limited studies consider the real conditions of the RPV subjected to a thermal shock due to a Loss of Coolant Accident (LOCA). During a LOCA event, the most severe conditions take place when the emergency core cooling (ECC) water is injected inside the cold legs filled initially with hotter water and/or steam. The rapid cooling of the down-comer and the internal RPV surface followed probably by re-pressurization of the RPV causes large temperature gradients and variation of pressure which induces thermal-mechanical stresses. In order to develop the model for integrity assessment of a reactor pressure vessel (RPV) subjected to pressurized thermal shock (PTS), a multi-physics simulation, which includes the thermo-hydraulic, thermo-mechanical and fracture mechanics analyses is necessary. The prediction of the temperature field is achieved by using computational fluid dynamics (CFD) simulation. In this report, a demonstration CFD standalone simulation is performed to support coupled analysis for Reactor Pressure Vessel (RPV) subjected to Pressurized Thermal Shock (PTS). The study use a simplified computational domain to represents a real RPV. The purpose of the study is to demonstrate the transient temperature response of RPV to ECC injection. The CFD model is built in a robust and efficient way for further coupled calculation. The next steps of this work, including the coupled thermal and tensor mechanics capabilities using Cardinal are expected to be complete by the end of FY21 for the demo problem. After this, into FY22, the capability will be demonstrated for a realistic RPV.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Polysulfone shock compressed above the decomposition threshold: Velocimetry and modeling of two-wave structures

Polysulfone was shock loaded to pressures of 14.6–26.2 GPa in a series of gas gun-driven plate-impact experiments measuring material response with embedded electro-magnetic particle velocity gauges and optical velocimetry. The embedded electro-magnetic particle velocity gauges did not show a distinct two-wave structure but did show rounding that suggested a reaction but not a distinct separation of the reactants and product waves. In contrast, the transmission experiments fielded with optical velocimetry, with product pressures ranging from 21.0 to 26.2 GPa, showed well-defined two-wave structures due to shock-driven chemical decomposition of the polymer to products at a higher density. Distinct two-wave structures have not previously been published in literature during polymer compression; here, we observed these two-wave structures at both the polymer/lithium fluoride and polymer/polymethylmethacrylate interfaces. Hydrodynamic simulations of the experiments were performed using a newly constructed SESAME equation of state (EOS) for the polymer, a thermochemical EOS for the decomposition products, and an Arrhenius reaction rate model for the kinetics of the reaction. Finally, simulation results also demonstrated two-wave structures but were unable to quantitatively reproduce either the embedded gauge or optical velocimetry data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

The structure of cluster merger shocks: turbulent width and the electron heating time-scale

We present a new 2MsChandra observation of the cluster merger Abell 2146, which hosts two huge M ~ 2 shock fronts each ~500 kpc across. For the first time, we resolve and measure the width of cluster merger shocks. The best-fitting width for the bow shock is 17 ± 1kpc and for the upstream shock is 10.7 ± 0.3 kpc. A narrow collisionless shock will appear broader in projection if its smooth shape is warped by local gas motions. We show that both shock widths are consistent with collisionless shocks blurred by local gas motions of 290 ± 30 km s –1 . The upstream shock forms later on in the merger than the bow shock and is therefore expected to be significantly narrower. From the electron temperature profile behind the bow shock, we measure the time-scale for the electrons and ions to come back into thermal equilibrium. We rule out rapid thermal equilibration of the electrons with the shock-heated ions at the 6σ level. The observed temperature profile instead favours collisional equilibration. For these cluster merger shocks, which have low sonic Mach numbers and propagate through a high β plasma, we find no evidence for electron heating over that produced by adiabatic compression. Our findings are expected to be valid for collisionless shocks with similar parameters in other environments and support the existing picture from the solar wind and supernova remnants. Furthermore, the upstream shock is consistent with this result but has a more complex structure, including a ~2ke V increase in temperature ~50 kpc ahead of the shock.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

ALEGRA Parallel Scaling for Shock in a Heterogeneous Structure

We investigate the strong and weak parallel scaling performance of the ALEGRA multiphysics finite element program when solving a problem involving shock propagation through a heterogeneous material. We determine that ALEGRA scales well over a wide range of problem sizes, cores, and element sizes, and that scaling generally improves as the minimum element size in the mesh increases.

36 MATERIALS SCIENCE↗