Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ScO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

The interaction of Sco X-1 with its environment.

Analytic discussion of the ionization produced in a uniform medium by a bremsstrahlung X-ray source. In particular, the ionization of interstellar gas in the vicinity of Sco X-1 is considered, and the analysis is formulated in terms of the specific parameters associated with this source. A constant temperature in the medium surrounding Sco X-1 is assumed, and simple numerical and analytic solutions are obtained for electron density and emitted radiation variation with distance from the X-ray source.

Silk, J.↗

Long-term X-ray studies of Sco X-1

No modulation of the 3-6 keV X-ray intensity of Sco X-1 at a level of excess of 1% was observed at the optical period of .787313d. Evidence is found for shot-noise character in a large fraction of the X-ray emission. Almost all of the Sco X-1 emission can be synthesized in terms of approximately 200 shots per day, each with a duration of approximately 1/3 day. A pinhole camera was used to obtain data and the data were statistically analyzed.

Holt, S. S.↗

Long term X-ray studies of Sco X-1

No modulation of the 3-6 keV X-ray intensity of Sco X-1 at a level of excess of 1% is observed at the optical period of .787313d. Evidence is found for shot-noise character in a large fraction or the X-ray emission. Almost all of the Sco X-1 emission can be synthesized in terms of approximately 200 shots per day, each with a duration of approximately 1/3 day.

Holt, S. S.↗

On high-velocity interstellar gas toward Delta Sco

Independent observations of the Na I D2 line toward Delta Sco are described which show that the two high-velocity absorption components reported by Hicks et al. (1975) are not of normal interstellar origin. A portion of the spectrum of Delta Sco near the D2 line is presented, and it is proposed that the two absorption components may have been of atmospheric origin, although their separation and relative intensities do not suggest any obvious counterparts within the observed telluric spectrum.

Hobbs, L. M.↗

Observation of the X-ray source Sco X-1 from Skylab

An attempt to observe the discrete X-ray source Sco X-1 on 20 September 1973 between 0856 and 0920 UT is reported. Data obtained with the ATM/S-056 X-ray event analyzer, in particular the flux observed with the 1.71 to 4.96 KeV counter, is analyzed. No photographic image of the source was obtained because Sco X-1 was outside the field of view of the X-ray telescope.

Wilson, R. M.↗

The expanding envelope of Tau Sco /B0 V/

Results are reported for an analysis of the UV spectrum of Tau Sco as observed by Copernicus. It is found that the spectrum exhibits a number of resonance lines of C III, C IV, N III, N V, O VI, Si IV, and P V, all of which have extended violet absorption wings that reach several different velocities. The UV lines of Tau Sco are compared with those of Zeta Pup, the line profiles are studied by a comparison with predicted profiles, and the optical depth of the lines is derived as a function of velocity in the envelope by means of line fitting. The velocity-height relation is examined, the mass-loss rate is derived, and the ionization equilibrium in the envelope is investigated. The data are then evaluated in light of three proposed mass-loss mechanisms. The mass-loss rate is estimated to be about 7 billionths of a solar mass per year, and the observed rapid acceleration of the stellar wind is attributed to radiation pressure in the envelope. It is shown that an imperfect-flow model for the stellar wind gives qualitative agreement with the observations.

Lamers, H. J. G. L. M.↗

Interstellar absorption lines in the spectrum of sigma Sco using Copernicus observations

Since the launch of Copernicus in 1972, studies have been made of the depletion of gas-phase elements onto dust grains. A few stars have been studied in detail, resulting in a standard depletion pattern which has since been used for comparison. Recent developments, however, have suggested that this standard pattern may need to be re-examined. Some weak, semi-forbidden lines were detected recently which may be able to resolve some of the ambiguities. Studies of single elements have shown that depletion of carbon and oxgyen are much smaller than previously determined. The high resolution ultraviolet spectral scans of sigma Sco were originally made in 1973, but have only recently been analyzed. All these stars are bright and moderately reddened. All four stars will be analyzed in detail, but sigma Sco is the first one completed. The data has broad coverage of ions, making these stars excellent candidates for determination of accurate depletions. A profile-fitting analysis was used rather than curves-of-growth in order to determine separate abundances and depletions in components separated by several km/sec.

Allen, M. M.↗

Theoretical studies of the low-lying states of ScO, ScS, VO, and VS

Bonding in the low-lying states of ScO, ScS, VO, and VS is theoretically studied. Excellent agreement is obtained with experimental spectroscopic constants for the low-lying states of ScO and VO. The results for VS and ScS show that the bonding in the oxides and sulfides is similar, but that the smaller electronegativity in S leads to a smaller ionic component in the bonding. The computed D0 of the sulfides are about 86 percent of the corresponding oxides, and the low-lying excited states are lower in the sulfides than in the corresponding oxides. The CPF method is shown to be an accurate and cost-effective method for obtaining reliable spectroscopic constants for these systems.

Bauschlicher, Charles W., Jr.↗

Observations and simulations of recurrent novae: U Sco and V394 CrA

Observations and analysis of the Aug. 1987 outburst of the recurrent nova V394 CrA are presented. This nova is extremely fast and its outburst characteristics closely resemble those of the recurrent nova U Sco. Hydrodynamic simulations of the outbursts of recurrent novae were performed. Results as applied to the outbursts of V394 CrA and U Sco are summarized.

Starrfield, S.↗

A search for gamma-ray line and low energy continuum emission from Sco X - 1

Results are presented from the analysis of the first high-resolution gamma-ray observations of Sco X - 1 by the HEAO 3 experiment. Flux upper limits are presented for line emission at 511 keV (positron annihilation), 0.847 (Fe-56), 1.23 (Fe-56), 2.2 (deuterium formation), 4.4 (C-12) and 6.2 (O-16) MeV. The 2sigma upper flux limits on continuum emission are also given. The relevance of the results within the context of the low-mass X-ray binary model of Sco X - 1 is discussed. The possibility of detecting gamma-rays from this source using the instruments on board the Gamma-Ray Observatory is discussed.

Bhattacharya, Dipen↗

Highly Significant Detection of X-Ray Polarization from the Brightest Accreting Neutron Star Sco X-1

The Imaging X-ray Polarimetry Explorer measured with high significance the X-ray polarization of the brightest Z-source, Sco X-1, resulting in the nominal 2–8 keV energy band in a polarization degree of 1.0% ± 0.2% and a polarization angle of 8° ± 6° at a 90% confidence level. This observation was strictly simultaneous with observations performed by NICER, NuSTAR, and Insight-HXMT, which allowed for a precise characterization of its broadband spectrum from soft to hard X-rays. The source has been observed mainly in its soft state, with short periods of flaring. We also observed low-frequency quasiperiodic oscillations. From a spectropolarimetric analysis, we associate a polarization to the accretion disk at <3.2% at 90% confidence level, compatible with expectations for an electron scattering dominated optically thick atmosphere at the Sco X-1 inclination of ∼44°; for the higher-energy Comptonized component, we obtain a polarization of 1.3% ± 0.4%, in agreement with expectations for a slab of Thomson optical depth of ∼7 and an electron temperature of ∼3 keV. A polarization rotation with respect to previous observations by OSO-8 and PolarLight, and also with respect to the radio-jet position angle, is observed. This result may indicate a variation of the polarization with the source state that can be related to relativistic precession or a change in the corona geometry with the accretion flow.

Fabio La Monaca↗

Start-up and Emergency Shutdown Modeling for a Coal-fired 10MWe sCO₂ Power Plant

As part of a Phase II Front End Engineering Design (FEED) study for the DOE Fossil Fuel Large Scale Pilots program, investigations of novel start-up and emergency shutdown methods for a stoker-fed, coal-fired, 10MWe sCO₂ power plant proposal were performed. These investigations were performed using 1D transient system models of the plant created within the GT-SUITE system modeling platform. The system model components were created using vendor quotation data (heat exchangers), performance maps (turbomachines), or FMU models (fired heater). Previously, Echogen Power Systems (Echogen) has used a sCO₂ power cycle start-up method that fills the system with liquid CO₂ to facilitate easy use of an electrically-driven start pump to transition the system from initial CO₂ fill to turbo-compressor initialization. The novel start-up method presented attempts this transition with a minimal filling of the system with liquid CO₂, to reduce the total CO₂ inventory required. This method leaves the start pump vulnerable to a two phase inlet condition as system pressure is below the CO₂ saturation pressure for the condenser cooling water temperature (Tcw). System model cases at Tcw of 18°C, 26°C, and 32°C, corresponding to cold, design, and hot ambient days, were analyzed to determine if the SP inlet condition could be kept as a subcooled liquid and estimate the CO₂ inventory reduction amount./p> Stoker-fed, coal-fired heaters continue to emit heat for some time even after emergency shutdown from events such as a power failure. This heat emission would lead to a failure of the fired heater, as the metal overheats, if the CO₂ flow is shut off. The emergency shutdown method presented utilizes CO₂ vented by a controllable vent valve (CRV) to provide CO₂ cooling flow to the fired heater. To determine the effectiveness of this method at keeping the fired heater peak tubing metal temperature below the ASME material temperature limit, for pressures below 5 MPa, of 816 °C, system model cases with CRV diameters ranging from 4” to 10”, and an alternative CO₂ vent routing with CRV size of 6”, were investigated./p>

01 COAL, LIGNITE, AND PEAT↗

Materials Data on ScO by Materials Project

ScO is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. Sc2+ is bonded to six equivalent O2- atoms to form a mixture of edge and corner-sharing ScO6 octahedra. The corner-sharing octahedral tilt angles are 0°. All Sc–O bond lengths are 2.24 Å. O2- is bonded to six equivalent Sc2+ atoms to form a mixture of edge and corner-sharing OSc6 octahedra. The corner-sharing octahedral tilt angles are 0°.

36 MATERIALS SCIENCE↗

ECAR-5021 Source Term Estimates for SCO Micro-Reactor Designs

The purpose of this document is to provide source term estimates and the associated technical basis for Strategic Capabilities Office (SCO) microreactor designs that use TRISO fuel. This estimate can be used for relevant environmental and safety analyses that will be done as part of the project for all of the selected suppliers for a safety design strategy. This is a combined quantitative and qualitative analysis.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Design of a 2 MW ZrC/W-based molten-salt-to-sCO 2 PCHE for concentrated solar power

To increase the power cycle efficiency and lower the levelized cost of electricity (LCOE) of concentrated solar power (CSP) plants, printed circuit heat exchangers (PCHEs) capable of operating above 700 °C with molten chloride salt and a sCO 2 -based fluid are needed. In this paper, the design of a high-pressure, high-temperature, 2 MW PCHE comprised of a thermomechanically-robust, zirconium carbide/tungsten (ZrC/W) composite is conducted for CSP plants. The ZrC/W composite is a material with high thermal conductivity, high stiffness, and high failure strength at high temperatures, along with excellent resistance to thermal cycling and thermal shock. In this work, a thermomechanical design analysis was conducted to select appropriate material thicknesses of the ZrC/W plates, and to determine the geometrical dimensions and the thermal performance of the PCHE. The influences of the plate number and heat exchanger length on power density and pressure drop have also been systematically investigated. Economic analyses were conducted to compare the cost of ZrC/W-based PCHEs to those comprised of IN740H (a state-of-the-art, nickel-based superalloy) and 316 stainless steel (316SS). Finally, at a sufficiently high plate production rate, the manufacturing cost of ZrC/W-based PCHEs can be significantly lower, while achieving a much higher power density, compared with state-of-the-art, nickel alloy-based and stainless steel-based PCHEs.

14 SOLAR ENERGY↗

Dry cooler contribution to LCOE in a sCO 2 power cycle for CSP

In order to maintain viability as a future power-generating technology, concentrating solar power (CSP) must reduce its levelized cost of electricity (LCOE). One component of solving this problem is reducing the cost of the power block while simultaneously increasing the efficiency of the thermodynamic cycle. One disruptive technology that has the promise to accomplish this is supercritical CO 2 (sCO 2 ) based power cycles. Here, these cycles are conceptually similar to steam cycles; however, they have substantially smaller turbomachinery at equivalent power while also delivering more efficiency at turbine inlet temperatures of 500-700 °C.

14 SOLAR ENERGY↗

Towards modelling AR Sco: generalized particle dynamics and strong radiation-reaction regimes

Numerical simulations of relativistic plasmas have become more feasible, popular, and crucial for various astrophysical sources with the availability of computational resources. The necessity for high-accuracy particle dynamics is especially highlighted in pulsar modelling due to the extreme associated electromagnetic fields and particle Lorentz factors. Including the radiation-reaction force in the particle dynamics adds even more complexity to the problem, but is crucial for such extreme astrophysical sources. We have also realized the need for such modelling concerning magnetic mirroring and particle injection models proposed for AR Sco, the first white dwarf pulsar. This paper demonstrates the benefits of using higher-order explicit numerical integrators with adaptive time-step methods to solve the full particle dynamics with radiation-reaction forces included. We show that for standard test scenarios, namely various combinations of uniform E- and B-fields and a static dipole B-field, the schemes we use are equivalent to and in extreme field cases outperform standard symplectic integrators in accuracy. We show that the higher-order schemes have massive computational time improvements due to the adaptive time-steps we implement, especially in non-uniform field scenarios and included radiation reaction where the particle gyro-radius rapidly changes. When balancing accuracy and computational time, we identified the adaptive Dormand–Prince eighth-order scheme to be ideal for our use cases. The schemes we use maintain accuracy and stability in describing the particle dynamics and we indicate how a charged particle enters radiation-reaction equilibrium and conforms to the analytical Aristotelian Electrodynamics expectations.

79 ASTRONOMY AND ASTROPHYSICS↗