Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRESS RELAXATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Creep and stress relaxation modeling of polycrystalline ceramic fibers

A variety of high performance polycrystalline ceramic fibers are currently being considered as reinforcement for high temperature ceramic matrix composites. However, under mechanical loading above 800 C, these fibers display creep-related instabilities which can result in detrimental changes in composite dimensions, strength, and internal stress distributions. As a first step toward understanding these effects, this study examines the validity of mechanistic-based empirical model which describes primary stage tensile creep and stress relaxation of polycrystalline ceramic fibers as independent functions of time, temperature, and applied stress or strain. To verify these functional dependencies, a simple bend test is used to measure stress relaxation for four types of commercial ceramic fibers for which direct tensile creep data are available. These fibers include both nonoxide (SCS-6, Nicalon) and oxide (PRD-166, FP) compositions. The results of the bend stress relaxation (BSR) test not only confirm the stress, time, and temperature dependencies predicted by the model but also allow measurement of model empirical parameters for the four fiber types. In addition, comparison of model predictions and BSR test results with the literature tensile creep data show good agreement, supporting both the predictive capability of the model and the use of the BSR test as a simple method for parameter determination for other fibers.

Dicarlo, James A.↗
NASA NTRS1993

Stress relaxation of low pressure plasma-sprayed NiCrAlY alloys

The stress relaxation behavior of three NiCrAlY alloys that are commonly used as bond coats for thermal barrier coatings (TBCs) has been directly measured. The relaxation study was conducted at temperatures of 800-1000 C and over a wide range of stresses. It was established that all three bond coat alloys relaxed quite rapidly at temperatures of 900 C and above. Since the upper use temperatures for bond coats in gas turbine engines are between 900 and 1000 C, bond coat relaxation is expected to occur in service. Therefore, relaxation of the bond coat has the potential to affect TBC life. Furthermore, the relaxation differences observed between the three alloys offers a possible explanation for the differences in TBC life observed for these bond coats. While bond coat relaxation is expected to occur for a TBC in service, the mechanism for a relaxation effect on TBC life, if it exists, is yet to be determined.

Brindley, W. J.↗
NASA NTRS1993

Stress relaxation of low pressure plasma-sprayed NiCrAlY alloys

The stress relaxation behavior of three NiCrAlY alloys that are commonly used as bond coats for thermal barrier coatings (TBCs) has been directly measured. The relaxation study was conducted at temperatures of 800-1000 C and over a wide range of stresses. It was established that all three bond coat alloys relaxed quite rapidly at temperatures of 900 C and above. Since the upper use temperatures for bond coats in gas turbine engines are between 900 and 1000 C, bond coat relaxation is expected to occur in service. Therefore, relaxation of the bond coat has the potential to affect TBC life. Furthermore, the relaxation differences observed between the three alloys offers a possible explanation for the differences in TBC life observed for these bond coats. While bond coat relaxation is expected to occur for a TBC in service, the mechanism for a relaxation effect on TBC life, if it exists, is yet to be determined.

Brindley, W. J.↗
NASA NTRS2003

The Effect of Tungsten and Niobium on the Stress Relaxation Rates of Disk Alloy CH98

Gas turbine engines for future subsonic transports will probably have higher pressure ratios which will require nickel-base superalloy disks with 1300 to 1400 F temperature capability. Several advanced disk alloys are being developed to fill this need. One of these, CH98, is a promising candidate for gas turbine engines and is being studied in NASA s Advanced Subsonic Technology (AST) program. For large disks, residual stresses generated during quenching from solution heat treatment are often reduced by a stabilization heat treatment, in which the disk is heated to 1500 to 1600 F for several hours followed by a static air cool. The reduction in residual stress levels lessens distortion during machining of disks. However, previous work on CH98 has indicated that stabilization treatments decrease creep capability. Additions of the refractory elements tungsten and niobium improve tensile and creep properties after stabilization, while maintaining good crack growth resistance at elevated temperatures. As the additions of refractory elements increase creep capability, they might also effect stress relaxation rates and therefore the reduction in residual stress levels obtained for a given stabilization treatment. To answer this question, the stress relaxation rates of CH98 with and without tungsten and niobium additions are compared in this paper for temperatures and times generally employed in stabilization treatments on modern disk alloys.

Gayda, John↗
DOE OSTI2025

Modified 316H constitutive model updated with high temperature stress relaxation test data

This report describes the calibration of a new high temperature constitutive model for 316H stainless steel, suitable for use with the ASME Boiler & Pressure Vessel Section III, Division 5, Class A rules for design by inelastic analysis. The model retains the same mathematical form used by the reference model included in Nonmandatory Appendix Z of the Code, but refits the model to an expanded dataset including all the data used to fit the original model plus seven new stress relaxation tests. The addition of these high temperature stress relaxation tests improves the model's accuracy in predicting relaxation at temperatures greater than 700 ⁰C, without compromising the accuracy of the model versus the original calibration data.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Predicting long-term stress relaxation on Alloy 709 using the crystal plasticity finite element method

This report summarizes the results of physics-based, crystal plasticity simulations for the long-term stress relaxation behavior of Alloy 709. The purpose of the study was to provide insight into five key questions related to long-term behavior in high temperatures materials which are difficult or impossible to answer experimentally: (1) is there a threshold stress for long-term relaxation? (2) is there strain threshold for relaxation damage, below which significant damage does not accumulate? (3) does damage continue to accumulate as the material relaxes or will damage accumulation plateau under some loading conditions? (4) does stress relaxation loading inevitably lead to failure? and (5) which, if any, engineering models for relaxation damage accumulation reasonably match the simulation results? The report summarizes the numerical simulations used to address these five questions and provides at least partial answers to each question.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Intermediate time sub-diffusion and stress relaxation in ring polymer melts

The slow dynamics of non-concatenated ring melts remains a frontier problem in polymer science with implications for many soft material environments including cellular biophysics. Here, in this work, we report large-scale simulations of model ring melts that analyze the monomer and center-of-mass (CM) mean square displacements (MSD) and stress relaxation function on intermediate time and length scales. The degree of dynamical slowing down is characterized by the maximally sub-diffusive fractional time scaling exponents. The data span an exceptionally wide range of ring degrees of polymerization and stiffnesses and are not successfully organized based on the classic measure linear chain entanglement, N/N e . Rather, we find that the crossover degree of polymerization, N D , based on ring macromolecular caging that successfully allows master curves to be constructed for the long-time CM self-diffusion constant also collapses these temporal dynamic scaling exponents. Different properties display different exponents and exhibit one or two regimes of linear variation with the logarithm of N D / N . A distinct crossover of the CM-MSD and stress relaxation exponents emerges at sufficiently large N or stiffness that is not found for the monomer MSD, indicating a novel form of dynamic decoupling. This crossover aligns with the predicted critical degree of polymerization for transitioning from a weak to strong caging regime, indicative of activated transport. The latter may reflect the emergence of an intermolecular collective contribution to stress in analogy with dense soft colloidal matter. Suggestions are made for future theoretical work to address the rich patterns of behavior discovered.

Anomalous diffusion↗
NASA NTRS2007

Modeling Creep-Induced Stress Relaxation at the Leading Edge of SiC/SiC Airfoils

Anticipating the implementation of advanced SiC/SiC composites into internally cooled airfoil components within the turbine section of future aero-propulsion engines, the primary objective of this study was to develop physics-based analytical and finite-element modeling tools to predict the effects of composite creep and stress relaxation at the airfoil leading edges, which will generally experience large thermal gradients at high temperatures. A second objective was to examine how some advanced NASA-developed SiC/SiC systems coated with typical EBC materials would behave as leading edge materials in terms of long-term steady-state operating temperatures. Because of the complexities introduced by mechanical stresses inherent in internally cooled airfoils, a simple cylindrical thin-walled tube model subjected to thermal stresses only is employed for the leading edge, thereby obtaining a best-case scenario for the material behavior. In addition, the SiC/SiC composite materials are assumed to behave as isotropic materials with temperature-dependent viscoelastic creep behavior as measured in-plane on thin-walled panels. Key findings include: (1) without mechanical stresses and for typical airfoil geometries, as heat flux is increased through the leading edge, life-limiting tensile crack formation will occur first in the hoop direction on the inside wall of the leading edge; (2) thermal gradients through all current SiC/SiC systems should be kept below approx.300 F at high temperatures to avoid this cracking; (3) at temperatures near the maximum operating temperatures of advanced SiC/SiC systems, thermal stresses induced by the thermal gradients will beneficially relax with time due to creep; (4) although stress relaxation occurs, the maximum gradient should still not exceed 300oF because of residual tensile stress buildup on the airfoil outer wall during cool-down; and (5) without film cooling and mechanical stresses, the NASA-developed N26 SiC/SiC system with thru-thickness Sylramic-iBN fiber reinforcement and a typical EBC coating has the potential of offering a maximum long-term steady-state operating temperature of approx.3100 F at the surface of the EBC.

Lang, Jerry↗
NASA NTRS1981

Creep recovery and stress relaxation tests of 6061-0 aluminum

The investigation of creep recovery and stress relaxation in aluminum using a closed loop servo-hydraulic test system is described. The practicality of a computer controlled test system for constant plastic strain rate tension tests is demonstrated. The plastic strain rate and the magnitude of the initial strain are shown to have a noticeable effect on subsequent creep behavior of aluminum.

Wu, H. C.↗
NASA NTRS1981

Long-time stress relaxation of a filled elastomer in vacuum environments

Samples of a filled elastomeric ablative material were stored at 45 C and 10 to the -6th torr for 7 months. Their tensile stress-relaxation modulus at constant strain was measured throughout the 7 months. Results of the testing are discussed primarily by comparisons of the data to atmospheric-pressure moduli (determined in this work for shorter periods of time) and with moduli predicted from short-time testing. Confirmation of the strengthening effects of vacuum on this composite was obtained. The use of time-temperature superposition techniques as an approximate accelerated testing procedure for this material under these conditions was also verified.

Ward, T. C.↗
NASA NTRS1971

Long-term aging of elastomers: Chemical stress relaxation of fluorosilicone rubber and other studies

Aerospace applications of elastomers are considered, including: propellant binders, bladder materials for liquid propellant expulsion systems, and fuel tank sealants for high-speed aircraft. A comprehensive molecular theory for mechanical properties of these materials has been developed but has only been tested experimentally in cases where chemical degradation processes are excluded. Hence, a study is being conducted to ascertain the nature, extent, and rate of chemical changes that take place in some elastomers of interest. Chemical changes that may take place in the fluorosilicone elastomer, LS 420, which is regarded as a fuel and high-temperature-resistant rubber are investigated. The kinetic analysis of the chemical stress relaxation and gel permeation chromatography studies comprise the major portion of the report.

Kalfayan, S. H.↗