Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SSPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Role of long-wavelength degrees of freedom in the rod-to-coil transition in polymers

An analytical model is fitted to experimental data to show that rod-to-coil (RTC) transformations in single strand polymers (SSPs) are close to true phase transitions. The RTC are known to occur when the temperature or pH of a solvent in which the SSP is immersed is varied abruptly. Long wavelength degrees of freedom in the SSPs induce long range interactions in the molecule which lead to a first order phase transition. The Landau formalism suggests that a long-range ordered state can appear at a low temperature. A microscopic model of the phonon degrees of freedom identifies the nonzero temperature threshold at which the phase transition will occur. The phenomenology described is similar to a previous model for transitions in double-strand polymers.

Goldenfeld, N.↗
NASA NTRS2002

Single Source Precursors for Thin Film Solar Cells

The development of thin film solar cells on flexible, lightweight, space-qualified substrates provides an attractive cost solution to fabricating solar arrays with high specific power, (W/kg). The use of a polycrystalline chalcopyrite absorber layer for thin film solar cells is considered as the next generation photovoltaic devices. At NASA GRC we have focused on the development of new single source precursors (SSP) and their utility to deposit the chalcopyrite semi-conducting layer (CIS) onto flexible substrates for solar cell fabrication. The syntheses and thermal modulation of SSPs via molecular engineering is described. Thin-film fabrication studies demonstrate the SSPs can be used in a spray CVD (chemical vapor deposition) process, for depositing CIS at reduced temperatures, which display good electrical properties, suitable for PV (photovoltaic) devices.

Banger, Kulbinder K.↗
NASA NTRS2003

CuInS2 Films Deposited by Aerosol-Assisted Chemical Vapor Deposition Using Ternary Single-Source Precursors

Polycrystalline CuInS2 films were deposited by aerosol-assisted chemical vapor deposition using both solid and liquid ternary single-source precursors (SSPs) which were prepared in-house. Films with either (112) or (204/220) preferred orientation, had a chalcopyrite structure, and (112)-oriented films contained more copper than (204/220)-oriented films. The preferred orientation of the film is likely related to the decomposition and reaction kinetics associated with the molecular structure of the precursors at the substrate. Interestingly, the (204/220)-oriented films were always In-rich and were accompanied by a secondary phase. From the results of post-growth annealing, etching experiments, and Raman spectroscopic data, the secondary phase was identified as an In-rich compound. On the contrary, (112)-oriented films were always obtained with a minimal amount of the secondary phase, and had a maximum grain size of about 0.5 micron. Electrical and optical properties of all the films grown were characterized. They all showed p-type conduction with an electrical resistivity between 0.1 and 30 Omega-cm, and an optical band gap of approximately 1.46 eV +/- 0.02, as deposited. The material properties of deposited films revealed this methodology of using SSPs for fabricating chalcopyrite-based solar cells to be highly promising.

Jin, Michael↗
NASA NTRS2004

CuInS2 Films Deposited by Aerosol-Assisted Chemical Vapor Deposition Using Ternary Single-Source Precursors

Polycrystalline CuInS2 films were deposited by aerosol-assisted chemical vapor deposition using both solid and liquid ternary single-source precursors (SSPs) prepared in-house. Films with either (112) or (204/220) preferred orientation were obtained, and compositional analysis showed that (112)-oriented films contained more copper than (204/220)-oriented films. Using X-ray diffraction, the signature of chalcopyrite structure was often confirmed for (112)-oriented films. The preferred orientation of the film is likely related to the decomposition and reaction kinetics associated with the molecular structure of the precursors at the substrate. Interestingly, the (204/220)-oriented films were always accompanied by a secondary phase, which was identified as an unknown In-rich compound from the results of post-growth annealing, etching experiments, and Raman spectroscopic data. By increasing Cu to In ratio in the film, (112)-oriented films were obtained with a maximum grain size of about 0.5 micrometers, and their X-ray diffractions did not show any observable signature of the In secondary phase. Electrical and optical properties of all the films grown were characterized. They all showed p-type conduction with an electrical resistivity between 0.1 omega cm and 30 omega cm, and an optical band gap of 1.46eV +/- 0.02, as deposited. The material properties of deposited films revealed this methodology of using SSPs for fabricating chalcopyrite-based solar cells to be highly promising.

Jin, Michael H.-C.↗
NASA NTRS2017

Invariant Imbedded T-Matrix Method for Axial Symmetric Hydrometeors with Extreme Aspect Ratios

The single-scattering properties (SSPs) of hydrometeors are the fundamental quantities for physics-based precipitation retrievals. Thus, efficient computation of their electromagnetic scattering is of great value. Whereas the semi-analytical T-Matrix methods are likely the most efficient for nonspherical hydrometeors with axial symmetry, they are not suitable for arbitrarily shaped hydrometeors absent of any significant symmetry, for which volume integral methods such as those based on Discrete Dipole Approximation (DDA) are required. Currently the two leading T-matrix methods are the Extended Boundary Condition Method (EBCM) and the Invariant Imbedding T-matrix Method incorporating Lorentz-Mie Separation of Variables (IITM+SOV). EBCM is known to outperform IITM+SOV for hydrometeors with modest aspect ratios. However, in cases when aspect ratios become extreme, such as needle-like particles with large height to diameter values, EBCM fails to converge. Such hydrometeors with extreme aspect ratios are known to be present in solid precipitation and their SSPs are required to model the radiative responses accurately. In these cases, IITM+SOV is shown to converge. An efficient, parallelized C++ implementation for both EBCM and IITM+SOV has been developed to conduct a performance comparison between EBCM, IITM+SOV, and DDSCAT (a popular implementation of DDA). We present the comparison results and discuss details. Our intent is to release the combined ECBM IITM+SOV software to the community under an open source license.

Pelissier, Craig↗
NASA NTRSDate not supplied

Anthropogenic Pathways for Modeling and Managing Future Arctic Fires

Wildland fires, including extreme fire events and seasons, are becoming more common in the boreal and Arctic regions due to climate change. Current climate modeling approaches do not include country- or region-specific socioeconomic pathways that specifically address the drivers of and potential mitigation techniques for wildland fires. Forest management, energy extraction, and tourism, together with firefighting capacity and readiness as well as fuels treatment, can have a significant impact on future wildland fire risks and impacts. To assess the impacts of anthropogenic factors and to align with previous work done on shared socioeconomic pathways (SSPs), climate pathways for future wildfires up to 2050 were created for the states that compose the original Arctic Council countries: Canada, the United States, the Kingdom of Denmark, Iceland, Sweden, Norway, and Finland as well as the Russian Federation (with whom the other seven countries withdrew participation from in May 2022 due to the invasion and ongoing war in Ukraine). High and low fire activity and risk pathways for all states comprising the Arctic were made, with expert ‘best guess’ pathways for each state created separately to represent the middle of road. The low activity and low fire risk pathways, named “We Got This”, assume active fire suppression via citizenry participation and official land management, efficient and extensive fuel treatments, and consistent and active wildland firefighting for each new ignition. The high activity and high fire risk pathways, named “Let It Burn”, assume nearly the opposite, due to lack of government and community response and no action on climate change drivers that increase wildland fire risk. The ‘best guess’ pathway, named “The Fire Will Come”, indicates that some countries are currently on the pathway for less fire compared to other Arctic and Boreal states but not a ‘no-fire’ future. For example, in the Nordic countries, human ignition sources from tourism, timber and energy extraction, summer cottages, and expanding wildland-urban intermix due to exurban growth may increase. In North America, these same risks will apply but also may see an expansion of agriculture that increases the likelihood of open burning in croplands. Drier fuel condition and extreme heat events due to climate change create favorable conditions for extreme wildfires from any ignition source. Throughout the Arctic and boreal lightning is expected to increase, increasing the risk of tundra fires in addition to forest fires in hard-to-reach locations that are more difficult to coordinate and execute wildland firefighting. To move the future Arctic fire SSPs forward, several short-term and long-term actions must be completed. Certain data needs are required, like a harmonized pan-Arctic and pan-boreal fuels geospatial product, while also a need to refine and socialize current definitions of fire seasons and fire management – including developing an open-source system to track and share innovation, mitigation, and adaptation strategies across Arctic states.

Arctic↗
NASA NTRS1994

Development of a Solid State Power Switch for the Cassini Spacecraft

The Cassini spacecraft uses a new hybrid device to replace the load switching relays used on previous missions. These hybrid devices provide additional functions such as circuit breaking, controlled voltage turn-on and current limiting features. The current limiting function makes an uninterruptible power system possible. This hybrid, the Solid State Power Switch (SSPS), performs the function of connecting the 192 Cassini loads to the spacecraft power bus in response to commands from the Command and Data subsystem.

Cassini↗
DOE OSTI2025

Second-generation downscaled earth system model data using generative machine learning

The second-generation Sup3rCC dataset provides high-resolution meteorological data generated through the downscaling of multiple earth system models (ESMs) from the Coupled Model Intercomparison Project Phase 6 (CMIP6). This downscaling is performed through application of a generative machine learning approach called Super-Resolution for Renewable Resource Data (sup3r). This dataset builds on the first-generation Sup3rCC data by applying improved bias correction methods and adding downscaled precipitation to the output variables. As with the first Sup3rCC version, the data still include temperature, wind speed and direction at multiple heights, pressure, three components of downwelling solar radiation, and relative humidity—all at 4-kilometer (km) hourly resolution over the contiguous United States. This is a 25x spatial enhancement and 24x temporal enhancement of the source 100-km daily-average ESM data. This extension of the Sup3rCC dataset includes data from six ESMs from two shared socioeconomic pathways (SSPs) totaling 400 years of data with multiple future projections of changing meteorological conditions. The scenario selection was based on a structured evaluation of historical ESM skill and comprehensive representation of possible trajectories of future climate change in temperature, humidity, precipitation, solar irradiance, and near-surface wind speeds. The inclusion of multiple future projections is intended to enable users to assess key drivers of un 36 certainty and variability. All data are double-bias corrected, resulting in a product that can be used out-of-the-box for energy system analysis with minimal historical bias. The potential applications of Sup3rCC data extend to various topics in renewable energy resource assessment, energy systems modeling, and grid resilience studies. High-resolution future meteorological projections are critical for evaluating the effects of changing meteorological conditions on renewable energy generation, energy demand, and for optimizing energy storage and grid infrastructure. The 4-km hourly resolution of the downscaled data enables understanding of spatial and temporal variability at the scales necessary for energy system operational planning. In addition, the dataset can support risk assessments by providing detailed information on possible future extreme weather events and long-term meteorological variability at scales relevant to energy infrastructure. By offering an enhanced representation of possible future meteorological conditions, the second-generation Sup3rCC dataset enables more precise modeling of energy resilience and adaptation strategies in response to changing meteorological conditions.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Climate change is intensifying rainfall erosivity and soil erosion in West Africa

Soil erosion is a critical environmental challenge with significant implications for agriculture, water quality, and ecosystem stability. Understanding its dynamics is essential for sustainable environmental management and societal welfare. Here, we analyze rainfall erosivity and erosion patterns across West Africa (WAF) during the historical (1982–2014), near future (2028–2060), and far future (2068–2100) periods under Shared Socioeconomic Pathways (SSPs 370 and 585). Using bias-corrected-downscaled (BCD) climate models validated against reference data, we ensure an accurate representation of rainfall—a key driver of erosivity (R-factor) and soil erosion. We compare Renard's approach and the Modified Fournier Index (MFI) to calculate the R-factor and note a strong correlation. However, Renard's method shows slightly lower accuracy in Sierra Leone, Guinea, and The Gambia, likely due to its inability to capture high-intensity, short-duration rainfall events. In contrast, the MFI, utilizing continuous rain gauge data, proves more reliable for these regions. We also attribute fluctuations in erosivity, such as those seen during the 2003 West Africa floods, to synoptic weather patterns influenced by multiple climate processes. Furthermore, our analysis reveals regions where future soil erosion could exceed 20 t/ha/yr due to climate change. Under the SSP 370 scenario, soil erosion in WAF is projected to rise by 14.84 % in the near future and 18.65 % in the far future, increasing further under SSP 585 to 19.86 % and 23.49 %, respectively. The most severe increases are expected in Benin and Nigeria, with Nigeria potentially facing a 66.41 % rise in erosion by the far future under SSP 585. These findings highlight the region's exposure to intensified climatic conditions and underscore the urgent need for targeted soil management and climate adaptation strategies to mitigate erosion's ecological and socioeconomic impacts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Future Climate Projections for South Florida: Improving the Accuracy of Air Temperature and Precipitation Extremes With a Hybrid Statistical Bias Correction Technique

Projecting future climate variables is essential for comprehending the potential impacts on hydroclimatic hazards like floods and droughts. Evaluating these impacts is challenging due to the coarse spatial resolution of global climate models (GCMs); therefore, bias correction is widely used. Here, we applied two statistical methods—standard empirical quantile mapping (EQM) and a hybrid approach, EQM with linear correction (EQM-LIN)—to bias correct precipitation and air temperature simulated by nine GCMs. We used historical observations from 20 weather stations across South Florida to project future climate under three shared socioeconomic pathways (SSPs). Compared to the EQM, the hybrid EQM-LIN method improved R 2 of daily quantiles by up to 30% over the historical period and improved MAE up to 70% in months that contain most extreme values. Projected extreme precipitation at the weather stations showed that, compared to the EQM-LIN, the EQM method underestimates the high quantiles by up to 26% in SSP585. The projected changes in annual maximum precipitation from historical period (1985–2014) to near future (2040–2069) and far future (2070–2100) were between 2% and 16% across the study area. Projected future precipitation suggested a slight decrease during summer but an increase in fall. This, along with rising summer temperatures, suggested that South Florida can experience rapid oscillations from warmer summers and increased flooding in fall under future climate. Additionally, our comparative analyses with globally and nationally downscaled studies showed that such coarse scale studies do not represent the climatic extremes well, particularly for high quantile precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Downscaled Daily 1 km Climate Data (NEX-GDDP-CMIP6) for Southeast Texas. Full ensemble of downscaled CMIP6 climate projections at 1 km daily resolution.

For the SETx-UIFL, the daily NASA Earth Exchange Global Daily Downscaled Projections (NEX-GDDP-CMIP6) dataset climate projections were downscaled from approximately 27 km to 1 km. The SETx dataset provides very high-resolution climate data for the historical period (1950–2014) and future scenarios derived from CMIP6 global models under the four Tier 1 Shared Socioeconomic Pathways (SSPs 1.26, 2.45, 3.70, and 5.85), developed for the IPCC Sixth Assessment Report. A subset of ten NEX-GDDP-CMIP6 models was selected to represent a balance of model families, climate sensitivities, and availability across scenarios, ensuring a diverse and reliable ensemble for regional analysis. Selected models: BCC-CSM2-MR, CESM2, CMCC-ESM2, CNRM-ESM2-1, EC-Earth3, FGOALS-g3, GFDL-CM4, MPI-ESM1-2-HR, MRI-ESM2-0, NorESM2-MM. Daily variables downscaled include tasmax, tasmin, tas, pr, hurs, huss, rsds, rlds, and sfcWind.

Persad, Geeta↗
DOE OSTI2024

GCAM-USA: IM3 Phase 2 Official Simulations

Overview GCAM-USA simulates 21st century energy-water-land interactions in global regions with sub-national detail in the United States (US). The IM3 project is focused on US multisector dynamics and has created eight GCAM-USA simulations by combining two Shared Socioeconomic Pathways (SSP3 and SSP5) with four high-resolution climate projections specific to the United States (see https://tgw-data.msdlive.org/). These climate projections include "hotter" and "cooler" variants for two Representative Concentration Pathways (RCP4.5 and RCP8.5). The resulting eight GCAM-USA simulations are named: rcp45cooler_ssp3 rcp45cooler_ssp5 rcp45hotter_ssp3 rcp45hotter_ssp5 rcp85cooler_ssp3 rcp85cooler_ssp5 rcp85hotter_ssp3 rcp85hotter_ssp5 Detailed Assumptions The SSPs describe alternative socioeconomic futures and their implications for both the US and global environmental challenges. As implemented in GCAM-USA, the primary difference between SSP3 and SSP5 in the US is their population growth projections, with SSP3 foreseeing lower growth and SSP5 projecting higher growth. The four climate projections explore moderate (RCP4.5) and high (RCP8.5) greenhouse gas emission (GHG) trajectories, each with a hotter and cooler climate variation based on the range of global climate model simulations in CMIP6s. These four climate projections are used in precursor models to develop climate impacts on building heating and cooling degree-hours, water availability, and agricultural yields that are provided as inputs to GCAM-USA. GCAM-USA reproduces the RCP4.5 and RCP8.5 GHG emissions trajectories consistent with each climate projection, using dynamic carbon prices to achieve RCP4.5. When the four climate projections are combined with the two SSP projections, the resulting eight scenarios allow GCAM-USA to explore how a wide, yet plausible, range of climate and socioeconomic impacts affects the interconnected energy, water, and land systems across the contiguous United States. Technical Details IM3 uses a version of GCAM-USA v5.3 that has an enhanced electricity sector and an updated data system needed to represent regional to local scale dynamics.

IM3↗
DOE OSTI2024

Hourly Electricity Demand Projections for Eight Combined Climate and Socioeconomic Scenarios

This dataset contains 40 years (1980-2019) of simulated historical hourly electricity demand (i.e., loads) and 80 years (2020-2099) of projected hourly loads for 54 Balancing Authorities (BAs) and 48 states plus the District of Columbia. Details about the scenarios and variables included in this dataset are in the readme.pdf file. The two primary models that created the dataset are a version of the Global Change Analysis Model with detailed sectoral resolution over the United States (GCAM-USA) and the Total ELectricity Loads (TELL) model. Links to the model source code and workflow for deriving the dataset are provided in an accompanying meta-repository: https://github.com/IMMM-SFA/burleyson-etal_2024_applied_energy. Projections are for four future climate scenarios that represent combinations of Representative Concentration Pathways (RCPs) 4.5 and 8.5 combined with two levels of climate model sensitivities: rcp45cooler, rcp45hotter, rcp85cooler, and rcp85hotter. The four climate scenarios are crossed with Shared Socioeconomic Pathways (SSPs) 3 and 5 to yield eight different future load projections: rcp45cooler_ssp3, rcp45cooler_ssp5, rcp45hotter_ssp3, rcp45hotter_ssp5, rcp85cooler_ssp3, rcp85cooler_ssp5, rcp85hotter_ssp3, and rcp85hotter_ssp5. The climate scenarios are from the IM3 Thermodynamic Global Warming (TGW) dataset which is linked below in the related metadata. The related metadata also contains links to a repository containing the raw GCAM-USA output files.

Climate Change↗
DOE OSTI2024

County Level Annual Population Projections for SSP3 and SSP5

This dataset consist of annual (2020-2100) county-level population projections for the United States (U.S.) for Shared Socioeconomic Pathways (SSPs) 3 and 5. The original decadal state-level data is used as an input to the gridded population data model to downscale the state-level projections for each SSP to a 1 km grid. The 1 km data is then aggregated to the county-level using the 2020 TIGER/Line county shapefiles from the U.S. Census Bureau. The two data files are shared as .csv files with the following structure: Rows = Data for individual counties which are identified using their Federal Information Processing Standard (FIPS) code. The FIPS code is stored in the first column. Columns = Each year from 2020-2100 is an individual column. For easier reference, the state name associated with each row is stored in the last column. Values in each cell are the downscaled estimated population for that county-year combination. Values are fractional due to the weighting scheme used in the downscaling. The paper and model source code cited in the "Related Works" section describes the initial source of the population projections.

FIPS↗
DOE OSTI2025

Extending Shared Socioeconomic Pathways to Future Water Supply In-frastructure Scenarios: A Case Study of San Antonio, TX

Datasets supporting findings and visualization behind Okoye and McManamay (2025) Extending Shared Socioeconomic Pathways to Future Water Supply Infrastructure Scenarios: A Case Study of San Antonio, TX. Environmental Research Communications, DOI: 10.57931/2563186 These datasets contains the results of a site selection analysis for municipal water supply planning across multiple Shared Socioeconomic Pathways (SSPs 1–5) and hard scenario classification of water systems in San Antonio, TX. It includes data at the resolution of individual surface water supply sources (COMIDs) and integrates a wide range of hydrologic, socioeconomic, infrastructural, and scenario-based planning variables. Please refer to the README file provided in Files for more details. Descriptions of the datasets are provided below. Dataset(s) Descriptions: Dataset_SSP1_SSP4.xlsx - Contains data used for site selection optimization under SSP1 to SSP4. This dataset was generated based on multi-indicator computations (e.g., WAI, WQI, ERI, WTC, WIC), scenario demand projections, and resource and spatial constraints, excluding new reservoir values. Dataset_SSP5.xlsx - Used for site optimization under SSP5. Unlike Dataset_SSP1_SSP4, this dataset includes new reservoir features with updated calculations of WAI, WTC, and WIC to reflect the added infrastructure and supply potential. hard_classification.xlsx - Provides the scenario classification output for each site. Includes both the initial scenario classification based on Euclidean Distance and adjusted classifications based on 30% change reduction BAU.zip - Zipped folder of .shp files showing spatially optimized water supply sites per SSP under the Business-As-Usual (BAU) water demand strategy LowGW.zip - Zipped folder of .shp files showing optimized site selections under the Low Groundwater strategy

geospatial↗
DOE OSTI2025

Applying a Multisector Scenario Framework to Evaluate Past and Future Public Surface Water Supply Infrastructure Strategies in Texas

Datasets supporting the index model and scenario analysis used in evaluating surface water supply strategies across different water system types in Texas. These data underpin the scenario development and application of five key indicators: Water Availability Index (WAI), Water Quality Index (WQI), Energy Requirement Index (ERI), Water Treatment Cost (WTC), and Water Infrastructure Cost (WIC). The datasets are organized by system type—stream reaches (flowlines), waterbodies, and reservoirs—and include both raw and standardized index values. The integrated datasets also provide scenario classifications (original and adjusted) based on infrastructure and planning priorities, enabling comparison across Shared Socioeconomic Pathways (SSPs). Additional strategy-level data are included to support evaluation of state-level new reservoir projects in relation to cost and availability tradeoffs. Please refer to the README file provided in Files for more details. Descriptions of the datasets are provided below. Dataset(s) Descriptions Folder: Index_model_database.zip Subfolder: Stream_reach.zip Fl_wf.csv, Fl_wq.csv, Fl_er.csv, Fl_wf_wtcUV.csv, Fl_wf_wtcnoUV.csv, Fl_allfac_wic1.csv, Fl_allfac_wic2.csvDatasets for computing WAI, WQI, ERI, WTC, and WIC for surface water systems classified as stream reaches (flowlines). Subfolder: Waterbody.zip Wb_wf.csv, Wb_wq.csv, Wb_er.csv, Wb_wf_wtcUV.csv, Wb_wf_wtcnoUV.csv, Wb_allfac_wic1.csv, Wb_allfac_wic2.csvEquivalent index model datasets for waterbodies, reflecting hydrologic and infrastructure attributes specific to impounded natural systems. Subfolder: Reservoir.zip Rs_wf.csv, Rs_wq.csv, Rs_er.csv, Rs_wf_wtcUV.csv, Rs_wf_wtcnoUV.csv, Rs_allfac_wic1.csv, Rs_allfac_wic2.csvIndex model datasets specific to regulated reservoir systems, incorporating both resource indicators and cost parameters. Folder: Integrated data.zip combined_merged_data.csv, combined_merged_data_scenario.csvDatasets integrating index model indicators (both raw and scaled) with scenario classifications, including adjustments reflecting SSP-aligned transitions and planning shifts. Folder: Additional data.zip wai_supplystrat_wic_merged.csvCurated dataset capturing proposed major reservoir-based municipal water supply strategies in Texas. Integrates site-level planning data with estimated capital infrastructure costs and water availability scores for comparative assessment.

geospatial↗
DOE OSTI2026

Public water supply infrastructure extensification and diversification in surface waters is insufficient to meet future demands in Texas

The data were developed to evaluate the capacity of existing and potential new surface water supply infrastructure to meet projected public water demands across districts in Texas under multiple future socioeconomic and climate scenarios. The database integrates hydrologic, water quality, infrastructure, energy, cost, demographic, and demand-projection information for candidate surface water supply locations. Candidate sites include stream reaches, waterbodies, reservoir surplus locations, and potential new reservoir sites. Water availability is characterized using historical and projected flow conditions, while site suitability is evaluated using five indicators: Water Availability Index (WAI), Water Quality Index (WQI), Energy Requirement Index (ERI), Water Treatment Cost (WTC), and Water Infrastructure Cost (WIC). The datasets include statewide candidate-site information, district-level demand projections under Shared Socioeconomic Pathways (SSPs), runoff-based allocation constraints, climate-stress metrics, and optimization outputs evaluating alternative infrastructure planning strategies. Optimization results compare Business-as-Usual (BAU) and All Surface Water (AllSW) demand-management approaches under both scaled and fixed cost-cap strategies. Associated validation datasets provide district-level feasibility assessments, infrastructure selection outcomes, cost-cap utilization, demand satisfaction metrics, and constraint diagnostics. Additional datasets quantify projected changes in storage and flow conditions as well as water availability stress for both existing and newly selected intake locations under the SSP5 scenario for mid-century and late-century climate conditions. Together, these datasets support assessment of the extent to which surface-water infrastructure expansion and diversification strategies can satisfy future public water demands while accounting for hydrologic, economic, and planning constraints across Texas. Dataset(s) Description Dataset_preoptimization.xlsx Comprehensive pre-optimization dataset containing candidate water-supply sites and associated hydrologic, water-quality, infrastructure, climate, demographic, runoff, and demand-projection variables used as inputs to the optimization analyses. Includes variable descriptions and the full statewide candidate-site database. District_level_site_selection.zip - Compressed archive containing all SSP-specific district-level optimization result files MESIO_ssp1_results.xlsx District-level site selection results for SSP1 (MESIO). Includes variable descriptions, BAU and AllSW site-selection results under scaled and fixed cost strategies, and district-level validation diagnostics. MESID_ssp2_results.xlsx District-level site selection results for SSP2 (MESID). Includes variable descriptions, BAU and AllSW site-selection results under scaled and fixed cost strategies, and district-level validation diagnostics. LCMRD_ssp3_results.xlsx District-level site selection results for SSP3 (LCMRD). Includes variable descriptions, BAU and AllSW site-selection results under scaled and fixed cost strategies, and district-level validation diagnostics. IRDev-Low_ssp4l_results.xlsx District-level site selection results for SSP4-Low (IRDev-Low). Includes variable descriptions, BAU and AllSW site-selection results under scaled and fixed cost strategies, and district-level validation diagnostics. IRDev-High_ssp4h_results.xlsx District-level site selection results for SSP4-High (IRDev-High). Includes variable descriptions, BAU and AllSW site-selection results under scaled and fixed cost strategies, and district-level validation diagnostics. RSIM_ssp5_results.xlsx District-level site selection results for SSP5 (RSIM). Includes variable descriptions, BAU and AllSW site-selection results under scaled and fixed cost strategies, and district-level validation diagnostics. tx_hydrological_stress.xlsx Hydrological stress dataset for existing and newly selected intake locations. Includes projected mid-century and late-century changes, gain/loss classifications, planning strategy information, and accompanying variable descriptions. Also includes water-stress metrics derived from historical and projected low-flow conditions.

Okoye, Perpetua I. (ORCID:0000000215545033)↗
NASA NTRS1975

Overcoming two significant hurdles to space power generation Transportation and assembly

The design of large, space-based power generation satellites is strongly influenced by the transportation modes available and the assembly methods adopted. Flight plans for assembly are explored using the Space Shuttle as the transport vehicle. Future heavy-lift launch systems are postulated, and their impact on assembly cost of operational Solar Satellite Power Stations (SSPS) presented. Sensitivity to various levels of ground detail parts prefabrication are compared to corresponding levels of orbital fabrication. Assumptions concerning the degree of human skills are outlined, and related to the method of assembly. Cost comparisons and recommendations for continued studies are developed.

Kline, R.↗