Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SOL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Modeling turbulent impurity transport in the SOL of DIII-D with a reduced model

A novel impurity transport model that approximates SOL turbulence as a fluctuating poloidal electric field is shown to be an acceptable replacement for the traditional approach of assigning an arbitrary radial diffusion coefficient to the impurity ions. The model is implemented in the DIVIMP impurity transport code and applied to an L-Mode tungsten divertor experiment on DIII-D. The poloidal electric field is represented as fluctuating between ±1000 V m –1 based on previous measurements. The resulting intermittent v r = E θ × B T transport causes ions to transport both into the core as well as into the far-SOL. Simultaneous agreement with estimates of the W density just inside the separatrix as well as in the far-SOL is obtained (n W ~ 10 14 m –3 and n W ~ 10 12 m –3 , respectively). Prompt re-deposition of the W ions was necessary to obtain agreement (f redep ~ 99%). Here, we conclude that simulating impurity transport using a physics-based approximation for turbulence in the SOL, versus arbitrarily assigning diffusion coefficients, may enable better reactor scale predictions of core impurity contamination.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

How turbulent transport broadens the heat flux width: local SOL production or edge turbulence spreading?

This paper uses data from limited HL-2A Ohmic-plasma to answer the question of how turbulent transport broadens the heat flux width. A key issue in this study is the determination of the origin of scrape-off layer (SOL) turbulence. We develop the concept of the energy production ratio ${R_a}$, which compares the flux of turbulence energy across the last closed flux surface (LCFS) to the net, integrated energy production in the SOL. The flux of turbulence energy (i.e. spreading) is measured directly, using Langmuir probes. Experimental data is used to evaluate ${R_a}$. Results show that usually ${R_a} > 1$, indicating that SOL turbulence is energized primarily by edge turbulence spreading. The exceptions—cases where ${R_a} < 1$—are those with relatively stronger ${\mathbf{E}} \times {\mathbf{B}}$ shear near the LCFS. The latter inhibits both turbulence spreading and local SOL production, but has greater effects on spreading. High blob fraction in the turbulence correlates with large values of ${R_a}$. The implications for heat flux width physics are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Boundary, SOL, and Divertor Physics Studies on TCV (Final Report for Research Funded by DoE Award DE-SC0020327)

Research supported under this grant was organized around two diagnostic systems installed on the TCV tokamak located at EPFL in Lausanne, Switzerland: Multi-Spectral Imaging (MSI) and Gas-Puff Imaging (GPI). MSI monitors 2-d time-history images of up to 10 spectral lines, in the visible, using identical views for all wavelengths. The primary application of MSI is to infer 2-d time histories of electron temperature and density in the Scrape-Off-Layer (SOL) of diverted plasmas, utilizing ratios of emission from multiple neutral helium lines. The atomic models are validated against 1-d Thomson scattering measurements. SOL density and temperature maps are analyzed to infer divertor dynamics, including particle and power flows, for a variety of divertor configurations, and specifically as flux expansion along the long-legged outboard divertor is systematically varied. GPI is used to measure details of edge fluctuations in the SOL, particularly as a function of plasma triangularity (δ), including both positive and negative δ. A threshold is found, whereby for δ<-0.3, edge turbulence in the far SOL is completely suppressed. Dynamics of the filamentary turbulence was also analyzed using advance machine learning techniques. Research in support of four PhD theses was carried out within the scope of this Award, including 2 at MIT and 2 at EPFL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

3D full wave fast wave modeling with realistic antenna geometry and SOL plasma

This paper reports the significant advancement of our ability to model and to understand how RF waves interact with the SOL plasma, by simulating the full torus 3D SOL plasma together with the antenna and core plasma. We introduce and use a recently developed and open source code, Petra-M, which was constructed on the scalable MFEM C++ finite element library, and performed 3D full wave simulations in the HHFW regime for both NSTX-U and LAPD plasmas. A first full wave simulation for a full 3D torus including a realistic antenna geometry and SOL plasma region for NSTX-U is presented. A scan of the antenna phasing shows a strong interaction between FWs and the SOL plasma for lower antenna phasing, which is consistent with previous NSTX HHFW observations. The effect of the 3D wave field on the fast ion population from NBI beams in NSTX-U is also discussed by using the 3D field obtained from the Petra-M simulations in the full-orbit following particle SPIRAL code. On LAPD, 3D full wave simulations of a new HHFW 4-strap antenna recently installed by TAE Technologies on LAPD are performed showing a qualitative agreement with experimental data.

Bertelli, Nicola↗
DOE OSTI2024

Investigating sol–gel matrix loading capacity toward producing surrogate nuclear explosive debris with realistic composition

Post detonation nuclear forensic materials which resemble the size, color, elemental composition, and radionuclide content of real nuclear debris would be valuable for developing and validating new nuclear forensic techniques. As nuclear fallout types vary significantly, the ability to tailor each of these parameters accurately is desired to produce materials capable of testing analytical methods under a wide array of forensic scenarios. Sol–gel synthesis techniques can provide tunability of size, shape and composition for producing a wide variety of solid nuclear forensics benchmarking materials. Further, the sol–gel process consists of forming a metal oxide material, often silica, through polymerization of a metal-alkoxy precursor. In this work, we characterize the ability to load sol–gel particles with secondary elemental components such as iron, aluminum, and calcium toward producing benchmarking materials approximating the elemental composition of historic nuclear debris from the Nevada National Security Site. We also demonstrate quantitative radionuclide encapsulation toward producing benchmarking materials with controllable radionuclide content. Finally, we employ these techniques to produce nuclear debris benchmarking materials with controllable elemental matrix composition and radionuclide content and compare these samples with the composition of a historic fallout sample previously reported from the Nevada National Security Site.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ce nanoparticles and sol-gel hybrid organic-inorganic coatings maximize corrosion protection in the anodized AA2024-T3

Herein we demonstrate that the corrosion resistance of the AA2024-T3 alloy can be maximized with the application of top protective sol-gel hybrid organic-inorganic coatings. Samples combining Ce nanoparticles within the pores of the anodic layer with the top sol-gel coatings were observed to outperform samples featuring only the coating. This research unravels the self-healing capability against corrosion of the sol-gel coating when Ce nanoparticles are present, as well as a good coverage of defective regions within the oxide by the hybrid layer. This research opens a paradigm aiming at maximizing the corrosion resistance for non-ferrous anodized alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2026

On how avalanches penetrate the SOL and broaden heat loads

Recent experiments reported a correlation between power law core temperature spectra and Dα emission, suggesting that heat avalanches penetrate the SOL. This paper derives a threshold criterion for avalanche penetration using a reduced model. Avalanches with ($\bigtriangledown$$\tilde{T}$) rms > $\bigtriangledown$$\tilde{T}$ crit at the separatrix are predicted to penetrate, and so broaden the SOL and heat load distribution. $\bigtriangledown$$\tilde{T}$ crit is ~ 1/$τ$ ∥ , where $τ$ ∥ is the parallel heat flow time through the SOL. Penetration occurs when avalanches are strong enough to steepen sufficiently to shock at the separatrix. A positive correlation is found between the nonlinear drive for steepening and the penetration depth. In particular, penetration depth exceeds that of the heuristic drift limit when shocks form. Implications for numerical and physical experiments are also discussed.

SOL heat load↗
DOE OSTI2022

Photopolymerizable Sol-gel Synthesis for Faster Manufacturing of Surrogate Nuclear Debris

Simulated debris is used to train first responders for potential nuclear detonations. Sol gel chemistry has been used to produce surrogate material for these training exercises, but the current average production time is 4 hours. Optimization using UV-polymerizable sol gel precursors can potentially decrease time as well as cost of the production process. FT-IR spectroscopy was used to measure and compare gelation kinetics of the standard and photopolymerizable sol gel synthetic procedures. Addition of the UV-polymerizable precursors and controlling the aqueous phase volume resulted in a 120-fold decrease in vitrification time.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

An implicit-explicit time splitting strategy for the far SOL plasma fluid model with DG-FEM discretization

We consider a far scrape-off layer (SOL) plasma fluid model of ions that is governed by a Braginskiitype model: a one-dimensional, nonlinear system of advection-diffusion equations coupled with a diffusion equation for neutral particles. Our motivation for studying this system arises from the coupling between the edge plasma and radio-frequency (RF) heating, where solving a far SOL plasma fluid model provides critical insights into edge plasma dynamics. Numerical simulations of plasma fluid models require advanced computational techniques to achieve both efficiency and accuracy, especially when resolving the boundary layer in magnetically confined plasmas. In this work, we propose an implicit-explicit time operator splitting strategy that allows for an efficient solution algorithm, where the diffusive terms are treated semi-implicitly requiring only a linear solve, while the advection part is handled explicitly using a strong-stability-preserving Runge-Kutta (SSP-RK3) scheme. This leads to a fully decoupled system in which the diffusion and advection sub-problems can be solved separately, simplifying the overall solution procedure and allowing for efficient parallelization, which is particularly relevant for exploring the impact of RF heating on the SOL plasma. The main challenge of the discretization is due to the strong coupling between diffusion and advection, particularly through the boundary conditions. This makes implementation of such a scheme in an accurate and stable manner nontrivial. We discuss in detail how to split the equations and manage boundary conditions to maintain stability and well-posedness for each subsystem. We also describe a spatial discretization approach, based on the discontinuous Galerkin finite element method (DG-FEM) and present numerical results for a one-dimensional system.

Burkovska, Olena [ORNL] (ORCID:0000000163101130)↗
DOE OSTI2022

3D full wave fast wave modeling with realistic HHFW antenna geometry and SOL plasma in NSTX-U

This paper reports the significant advancement of our ability to model and to understand how RF waves interact with the SOL plasma, by developing for the full torus 3D scrape-off layer (SOL) plasma simulation together with the antenna and core plasma in the NSTX-U device in HHFW frequency regime for a cold plasma model. The present paper extends the previous modeling (Bertelli et al 2020 AIP Conf. Proc. 2254 030001) to a full 3D device geometry including realistic antenna geometry in order to capture a more realistic experimental situation including the fully 3D wave field effects and the antenna plasma interaction in the SOL plasma, and, at the same time, resulting core wave propagation. Here, the central tool of the present work is the Petra-M code, which is a newly developed state-of-the-art generic electromagnetic simulation tool for modeling RF wave propagation based on MFEM (http://mfem.org), an open source scalable C++ finite element method library.

3D RF modeling↗
DOE OSTI2024

Turbulent drifts of impurity ions as an explanation for anomalous radial transport in the far-SOL of DIII-D

Abstract Successful fusion reactor operation relies on minimal core contamination by impurities, otherwise too much power may be radiated and harm performance. This requires reliable predictions of impurity transport from the scrape-off layer (SOL) into the core, beyond the traditional ‘anomalous’ diffusion approach. We report a set of far-SOL tungsten transport simulations that demonstrate the role of turbulent drifts on radial impurity transport. A turbulent plasma background is simulated using the gyrokinetic SOL code Gkeyll. Tungsten ions are followed within the plasma background using only their drifts. We find that tungsten tends to travel radially outwards with velocities between v r = 300–1200 m s −1 primarily due to polarization drift. We also extract an anomalous radial diffusion coefficient that varies from D r anom = 5–20 m 2 s −1 . These results are compared to and agree with previous interpretive modeling results. We also show how the turbulent polarization drift can transport some tungsten ions from the wall inwards with effective pinch velocities up to 10 000 m s −1 . We conclude that turbulent drifts are a likely explanation for historically anomalous radial impurity transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Electric fields and stationary drift flows in the island divertor SOL of Wendelstein 7-X

Abstract In the island divertor scrape-off layer (SOL) of the Wendelstein 7-X stellarator, 2D-resolved Langmuir probe measurements uncover a complex spatial structure of electron temperature, density, and floating potential. Depending on details of magnetic island size and position, significant poloidal gradients and non-monotonic radial profiles are observed. The resulting electric fields imply the presence of sheared stationary drift flows with poloidal velocities of a few km/s, with flow channels as narrow as one cm. Such flows are observed with a gas puff imaging diagnostic in qualitative agreement with the probe results and imply a significant transport channel in the SOL. The 2D distribution of plasma parameters is intricately associated to the unique magnetic structure of the island divertor SOL and highlights the necessity for more accurate magnetic field reconstructions.

Killer, Carsten (ORCID:0000000177473066)↗
DOE OSTI2025

Exploring the transition from continuous turbulence fluctuations to bursting ELMs in high SOL density regimes

BOUT++ turbulence simulations of the DIII-D reveal that the density profile between the separatrix and pedestal plays a crucial role in the dynamics of edge localized modes (ELMs) and edge plasma turbulent transport. Nonlinear simulations demonstrate that small ELMs in the DIII-D hybrid scenario under high SOL density conditions are predominantly driven by local ballooning modes near the separatrix, stabilizing global instabilities while enhancing localized pressure fluctuations. A key control parameters for ELM dynamics is the separatrix-to-pedestal density ratio, n e,sep /n e,ped . A high ratio indicates a shallow gradient, favoring small ELMs, while a lower ratio signals a steep gradient, which increases the likelihood of large ELMs. Comprehensive parameter scans, including n e,sep /n e,ped , density gradient profiles near the separatrix, and resistivity, reveal the critical role of these parameters in shaping transitions between turbulence-driven transport and ELM bursting. The scans demonstrate that in high SOL density regimes, small ELMs can result from either global resistive MHD instabilities or local ballooning modes near the separatrix, depending on the steepness of the separatrix density gradient. These findings also highlight the transition from continuous turbulence to small ELMs. The post-crash peak in pressure fluctuations, δP rms serves as a critical metric for identifying transition from continuous turbulence fluctuations to ELM bursting. Larger δP rms values correlate with ELM bursts driven by local or global instabilities, whereas smaller values indicate turbulence-dominated transport. Drift-Alfvén and resistive ballooning turbulence enhance the entrainment of fluctuations from the pedestal to the SOL, contributing to the complex interplay of dynamics in this regime. These findings emphasize the importance of separatrix density shaping and pedestal gradient control for optimizing ELM behavior in ITER and future fusion devices.

Li, Nami [Lawrence Livermore National Laboratory (↗
DOE OSTI2022

Stable Element Doping of Sol-gel Toward Simulating Environmental Matrix in Surrogate Explosive Nuclear Debris

Training nuclear forensic analysis personnel in post-detonation scenarios is of critical importance to nuclear threat response capabilities. Thus, realistic nuclear debris simulants which resemble the size, color, elemental composition, and radionuclide content of actual nuclear fallout from a recent detonation would be valuable for training nuclear first responders in realistic scenarios. As nuclear fallout types vary significantly in each of these parameters based on detonation environment (rural, urban, maritime etc.) and collection location, the ability to tailor each of these parameters accurately in simulated debris would be of immense benefit to the post-detonation analysis community for training both in-field collections and triage and the validation of laboratory level nuclear forensic techniques. Sol-gel synthesis techniques can provide the tunability of size, shape and composition required for producing surrogate nuclear debris of a wide variety. The sol-gel process consists of forming a metal oxide material, often silica, through polymerization of a metal-alkoxy precursor. In this work, we characterize the ability to load the sol-gel particles with secondary elemental components such as iron, aluminum, and calcium toward approximating the elemental composition of debris from various detonation environments and demonstrate the ability to produce particles with controllable size, shape, and color. We also demonstrate quantitative radionuclide encapsulation toward reproducing the radionuclide content of actual fallout from a recent detonation. Finally, we then employ these techniques in producing simulated aerodynamic debris samples with realistic elemental matrix composition and radionuclide content simulating a recent uranium-fueled detonation taking place in a rural desert environment and compare it to historic fallout from the Nevada Nuclear Security Site.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Stable Element Doping of Sol-gel Toward Simulating Environmental Matrix in Surrogate Explosive Nuclear Debris

Training nuclear forensic analysis personnel in post-detonation scenarios is of critical importance to nuclear threat response capabilities. Thus, realistic nuclear debris simulants which resemble the size, color, elemental composition, and radionuclide content of actual nuclear fallout from a recent detonation would be valuable for training nuclear first responders in realistic scenarios. As nuclear fallout types vary significantly in each of these parameters based on detonation environment (rural, urban, maritime etc.) and collection location, the ability to tailor each of these parameters accurately in simulated debris would be of immense benefit to the post-detonation analysis community for training both in-field collections and triage and the validation of laboratory level nuclear forensic techniques. Sol-gel synthesis techniques can provide the tunability of size, shape and composition required for producing surrogate nuclear debris of a wide variety. The sol-gel process consists of forming a metal oxide material, often silica, through polymerization of a metal-alkoxy precursor. In this work, we characterize the ability to load the sol-gel particles with secondary elemental components such as iron, aluminum, and calcium toward approximating the elemental composition of debris from various detonation environments and demonstrate the ability to produce particles with controllable size, shape, and color. We also demonstrate quantitative radionuclide encapsulation toward reproducing the radionuclide content of actual fallout from a recent detonation. Finally, we then employ these techniques in producing simulated aerodynamic debris samples with realistic elemental matrix composition and radionuclide content simulating a recent uranium-fueled detonation taking place in a rural desert environment and compare it to historic fallout from the Nevada Nuclear Security Site.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Retention of radionuclides in sol–gel surrogate nuclear explosive debris

Sol–gel vitrification can be used to rapidly produce solid, vitreous materials to support nuclear forensics research. Here, this work investigates three sol–gel synthetic approaches’ ability to retain fission products within the glass as a function of drying temperature. Eight of the ten fission products studied were quantitatively retained (less than 5% losses) at temperatures up to 600 °C for glasses prepared using an acidic catalyst and at temperatures up to 300 °C for glasses prepared using a basic catalyst. Both systems show partial loss of ruthenium and complete loss of iodine at temperatures above 300 and 100 °C, respectively.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Quantitative Encapsulation and Homogeneity Assessment of Sol–Gel Based Nuclear Explosive Debris Simulants

Nuclear explosive debris simulants are an important material in training and validating aspects of post-detonation nuclear forensic processes. Realistic simulants should replicate several aspects of nuclear explosive debris such as the size, shape, color, density, and chemical and radiological properties. Silica particles produced via sol-gel synthesis have recently been found to successfully reproduce many of these parameters including the controllable incorporation of radionuclide content. However, to be useful as a benchmarking material for validation and verification of laboratory methodologies, radionuclide content from batch-to-batch must be reproducible. Here, in this work, we explore the variance in radionuclide distribution incorporated into sol-gel benchmarking materials with respect to sample subdivision. Results will help inform the sample sizes required to minimize variance between samples.

36 - MATERIALS SCIENCE↗
DOE OSTI2023

Covalent Triazine Framework-Derived Membranes: Engineered Sol–Gel Construction and Gas Separation Application

Covalent triazine frameworks (CTFs) represent one of the most extensively studied organic networks characterized by graphitic π-conjugated structures linked by aza-fused rings, possessing unique features such as compositions of light elements (e.g., C, H, and N), porous architectures abundant heteroatom involvement, and extensively conjugated structures. In addition, the textural and chemical structures of CTFs could be engineered via synthesis control to accommodate diverse applications. CTF materials with notable characteristics, including plentiful (ultra-)micropores, high surface areas, and the presence of CO 2 -philic functional groups involving nitrogen (N), oxygen (O), and fluorine (F), hold great promise as potential candidates for anthropogenic CO 2 capture and sequestration (CCS) applications. However, the conventional high-temperature involved ionothermal procedures and the solution-based coupling pathway only afforded CTF materials in powder form, which is difficult to be processed toward membrane formation. Successful fabrication of CTF-derived membranes will rely on the development of alternative polymerization approaches as well as structural engineering to afford membrane architectures with controllable porosity distribution and active interaction sites with CO 2 benefiting the CO 2 separation procedure. In this Account, a demonstration of the latest progress in the development of CTF-derived membranes was provided. The CTF membranes were mainly synthesized via a superacid (e.g., CF 3 SO 3 H)-promoted sol–gel approach involving the polymerization of aromatic nitrile monomers. The formation of the triazine unit through the trimerization of cyano groups served as the cross-linkers, resulting in the creation of π-conjugated networks alongside the arenes present in the starting materials. The aromatic nitrile monomers with rigid and sterically hindered structures were required to afford CTF membranes with nanoporous architectures. The acidity of the superacid and reactivity of the aromatic monomers played critical roles in the polymerization efficiency. The monomer diversity and synthesis tunability endowed the introduction of CO 2 -philic functionalities (e.g., pyrazole and fluorine) within the CTF skeletons, and integration of ionic moieties was achieved by adopting FSO 3 H with stronger acidity as the catalyst and aromatic nitrile monomers with pyrazine structures. To ensure the successful construction of fluorinated CTF membranes, it is important to avoid any fluorines on the ortho-position of the cyano groups on the benzene ring. Through control over the monomers and reaction conditions, flexible, transparent, and insoluble CTF membranes could be fabricated. The sol–gel method could be further expanded to membrane fabrication through acetyl-to-benzene transformation through synthesis control. The mild oxidation-exfoliation-filtration method was also demonstrated to fabricate substrate-supported CTF membranes. The as-afforded membranes are well characterized to determine the structural features and provide information to study the structure-performance relationship. Here, the application of CTF membranes in CO 2 separation was summarized, focusing on the approaches being developed to enhance CO 2 uptake and separation performance. In addition to utilizing the pristine CTF membranes for gas separation, functionalized carbon molecular sieve membranes could be obtained from the pyrolysis of thermally stable CTF membrane precursors toward efficient CO 2 separation, benefiting from the abundant ultramicropores being created during the pyrolysis/decomposition procedure and involvement of CO 2 -philic functionalities such as fluorine and nitrogen-containing moieties. Based on these achievements, unsolved issues in CTF membrane-related fabrication and applications, including the potential solution approaches, have been proposed to advance the application of CTF membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗