Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEISMIC DETECTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Mobile seismic exploration

Laser-Doppler-Vibrometry (LDV) is an established technique to measure vibrations in technical systems with picometer vibration-amplitude resolution. Especially good sensitivity and resolution can be achieved at an infrared wavelength of 1550 nm. High-resolution vibration measurements are possible over more than 100 m distance. This advancement of the LDV technique enables new applications. The detection of seismic waves is an application which has not been investigated so far because seismic waves outside laboratory scales are usually analyzed at low frequencies between approximately 1 Hz and 250 Hz and require velocity resolutions in the range below 1 nm/s/√Hz. Thermal displacements and air turbulence have critical influences to LDV measurements at this low-frequency range leading to noise levels of several 100 nm/√Hz. Commonly seismic waves are measured with highly sensitive inertial sensors (geophones or Micro Electro-Mechanical Sensors (MEMS)). Approaching a laser geophone based on LDV technique is the topic of this paper. We have assembled an actively vibration-isolated optical table in a minivan which provides a hole in its underbody. The laser-beam of an infrared LDV assembled on the optical table impinges the ground below the car through the hole. A reference geophone has detected remaining vibrations on the table. We present the results from the first successful experimental demonstration of contactless detection of seismic waves from a movable vehicle with a LDV as laser geophone.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Methodology for tomographic imaging ahead of mining using the shearer as a seismic source

Poor rock conditions in a coal long wall panel can result in roof collapse when a problematic zone is mined, significantly interrupting mine production. The ability to image rock conditions (stress and degree of fracturing) ahead of the face gives the miners the ability to respond proactively to such problems. This method uses the energy from mining machinery, in this case a coal shearer, to produce an image of the rock velocity ahead of the mining face without interrupting mining. Data from an experiment illustrates the concept. Geophones installed in gate-road roofs record the noise generated by the shearer after it has traversed the panel ahead of the mining face. A generalized crosscorrelation of the signals from pairs of sensors determines relative arrival times from the continuous seismic noise produced by the shearer. These relative times can then be inverted for a velocity structure. The crosscorrelations, performed in the frequency domain, are weighted by a confidence value derived from the spectral coherence between the traces. This produces stable crosscorrelation lags in the presence of noise. The errors in the time-domain data are propagated through to the relative traveltimes and then to the final tomographic velocity image, yielding an estimate of the uncertainty in velocity at each point. This velocity image can then be used to infer information about the stress and fracture state of the rock, providing advance warning of potentially hazardous zones.

01 COAL, LIGNITE, AND PEAT↗

Sandia Compact Sensor Node (SCSN) v. 1.0

The SCSN communication protocol is implemented in software and incorporates elements of Frequency Division Multiple Access (FDMA), Time Division Multiple Access (TDMA), and Carrier Sense Multiple Access (CSMA) to reduce radio message collisions, latency, and power consumption. Alarm messages are expeditiously routed to a central node as a 'star' network with minimum overhead. Other messages can be routed along network links between any two nodes so that peer-to-peer communication is possible. Broadcast messages can be composed that flood the entire network or just specific portions with minimal radio traffic and latency. Two-way communication with sensor nodes, which sleep most of the time to conserve battery life, can occur at seven second intervals. SCSN software also incorporates special algorithms to minimize superfluous radio traffic that can result from excessive intrusion alarm messages. A built-in seismic detector is implemented with a geophone and software that distinguishes between pedestrian and vehicular targets. Other external sensors can be attached to a SCSN using supervised interface lines that are controlled by software. All software is written in the ANSI C language for ease of development, maintenance, and portability.

HARRINGTON, JOHN↗

Assessing the Effectiveness of Generalized Likelihood Ratio Test Detector Schemes in Seismic Event Detection and the Avoidance of Nontarget Signals

Cross-correlation techniques have played a long-standing and pivotal role in seismic event monitoring. However, the performance of correlation-based detectors is challenged by nuisance seismicity, or nontarget signals. Such detections are a problem when the mission is to automatically map events to the correct source region. Using aftershocks of the 2014 $M_w$ 6.0 South Napa, California, earthquake, we demonstrate the effectiveness of utilizing a dynamic correlation processor framework in a generalized likelihood ratio test (GLRT) detector configuration to minimize nontarget detections. A GLRT maximizes a detection statistic with respect to one or more unknown parameters. In this case, the detection statistic is a template signal match against the waveform in a window sliding over a data stream, and the unknown parameter is an index variable indicating group membership of the template event or events. Detected events are assigned to the event group that yields the largest detection statistic. In this work, our results show that a GLRT detector will outperform a suite of independently operating correlation and subspace detectors in terms of having a lower nontarget detection rate at a given missed detection rate. We also show that a GLRT detector composed of a few high-rank subspace detectors has a slightly higher nontarget detection rate, but a significantly lower missed detection rate, than a GLRT detector composed of many low-rank subspace detectors. The high-rank GLRT configuration produced impressive results even with marginal data (single channel, single station, and very low time bandwidth product), which bodes well for the utility of building efficient aftershock classification systems and global monitoring systems at larger scales. However, future work is required to assess performance at the regional scale and to assess the performance of the system at detecting target events not used in the detector template creation.

58 GEOSCIENCES↗

Sensitivity of Seismically Cued Antineutrino Detectors to Nuclear Explosions

Here, we evaluate the sensitivity of large gadolinium-doped water detectors to antineutrinos released by nuclear-fission explosions, using updated signal and background models and taking advantage of the capacity for seismic observations to provide an analysis trigger. Under certain realistic conditions, the antineutrino signature of a 250-kton pure-fission explosion could be identified several hundred kilometers away, in a detector about the size of the largest module currently proposed for a basic physics experiment. In principle, such an observation could provide rapid confirmation that the seismic signal coincided with a fission event, possibly useful for international monitoring of nuclear-weapon tests. We discuss the limited potential for seismically cued antineutrino observations to constrain fission yield, differentiate pure fission from fusion-enhanced weapon tests, indicate that the seismic evidence of an explosion had been intentionally masked, or verify the absence of explosive testing in a targeted area. We conclude that advances in seismic monitoring and neutrino physics have made the detection of explosion-derived antineutrinos more conceivable than previously asserted, but the size and cost of sufficiently sensitive detectors continue to limit applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Intruder Detector

The shadowy prowler is attempting a break-in, unaware that his presence has already been detected and reported by the device in the lower left corner of the photo. It is part of a three-element ntruder Detecti on System developed by NASA's Ames Research Center from technology acquired in the Apollo lunar exploration program. Apollo astronauts left behind on the moon small portable seismic (shock) detectors to record subsurface vibrations and transmit to Earth data on the moon's density and thickness. A similar seismic detector is the key component of the lntruder Detection System. Encased in a stainless steel tube, the detector is implanted in the ground outside the facility being protected-home, bank, industrial or other facilities. The vibration-sensing detector picks up the footstep of anyone within a preset range. The detector is connected by cable to the transmitter, which relays the warning to a portable radio receiver. The radio alerts plant guards or home occupants by emitting an audible tone burst for each footstep.

Source record↗

Preliminary analysis of the International Data Centre pipeline.

The International Data Centre of the Comprehensive Nuclear-Test-Ban Treaty Organization relies on automatic data processing as the first step in identifying seismic events from seismic waveform data. However, more than half of the automatically identified seismic events are eliminated by IDC analysts. Here, an IDC dataset is analyzed to determine if the number of automatically generated false positives could be reduced. Data that could be used to distinguish false positives from analyst-accepted seismic events includes the number of stations, the number of phases, the signal-to-noise ratio, and the pick error. An empirical method is devised to determine whether an automatically identified seismic event is acceptable, and the method is found to identify a significant number of the false positives in IDC data. This work could help reduce seismic analyst workload and could help improve the calibration of seismic monitoring stations. This work could also be extended to address identification of seismic events missed by automatic processing.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Reply to “Comment on ‘The Reduced Detection Rate of Signals That Are Hidden by Earthquakes: Case Studies with Spotlight Detectors That Operate at Seismic Arrays,’ by Joshua D. Carmichael, Brent G. Delbridge, and Richard Alfaro-Diaz” by Paul G. Richards

We reply to a comment that Paul G. Richards (Richards, 2026) directed to an article by Carmichael et al. (2025). Richards expressed concern over two issues. The first issue relates to the size of the explosions discussed in the article. The second relates to the probability that earthquakes and explosions sourced near the same location coincide in time, by chance. We do not address the first issue because the original article does not assign significance to the size of the explosions from the point of view of an experimental party. We do respond to Richards’ comment on the second issue and claim that it can be explained through a clarification about conditional versus joint probabilities. Our present discussion, therefore, describes the difference between the conditional probability that a correlator fails, given that an explosion and earthquake coincidently occur in the same place, and the joint probability that a correlator fails while an earthquake and explosion also coincidentally occur in the same place. This latter, joint probability appears to be rare. We clarify that our original article did not treat the joint probability, only the conditional probability.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Large-Scale Test of Dynamic Correlation Processors: Implications for Correlation-Based Seismic Pipelines

Correlation detectors are of considerable interest to the seismic monitoring communities because they offer reduced detection thresholds and combine detection, location and identification functions into a single operation. They appear to be ideal for applications requiring screening of frequent repeating events. However, questions remain about how broadly empirical correlation methods are applicable. We describe the effectiveness of banks of correlation detectors in a system that combines traditional power detectors with correlation detectors in terms of efficiency, which we define to be the fraction of events detected by the correlators. This paper elaborates and extends the concept of a dynamic correlation detection framework – a system which autonomously creates correlation detectors from event waveforms detected by power detectors; and reports observed performance on a network of arrays in terms of efficiency. We performed a large scale test of dynamic correlation processors on an 11 terabyte global dataset using 25 arrays in the single frequency band 1-3 Hz. The system found over 3.2 million unique signals and produced 459,747 screened detections. A very satisfying result is that, on average, efficiency grows with time and, after nearly 16 years of operation, exceeds 47% for events observed over all distance ranges and approaches 70% for near regional and 90% for local events. This observation suggests that future pipeline architectures should make extensive use of correlation detectors, principally for decluttering observations of local and near-regional events. Our results also suggest that future operations based on correlation detection will require commodity large-scale computing infrastructure, since the numbers of correlators in an autonomous system can grow into the hundreds of thousands.

47 OTHER INSTRUMENTATION↗

Erratum to: Data Fusion to Support Integrated Nuclear Detonation Detection [Slides]

The original document (LA-UR-22-29547) contained minor equation errors that approximate correct equations that couple the multi-sensor, serial system detector thresholds for a seismic Rayleigh wave detector and an acoustic energy detector. Those errors appeared on slides 62-67. This erratum associates the following slides with the erroneous slides. The numbers of the erroneous slides are marked at the upper right in small text in orange. A result of those errors over-predict the performance of the two-sensor serial network, that is, the former document provides an optimistic estimate of system performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Covariance Modifications to Subspace Bases

Adaptive signal processing algorithms that rely upon representations of signal and noise subspaces often require updates to those representations when new data become available. Subspace representations frequently are estimated from available data with singular value (SVD) decompositions. Subspace updates require modifications to these decompositions. Updates can be performed inexpensively provided they are low-rank. A substantial literature on SVD updates exists, frequently focusing on rank-1 updates (see e.g. [Karasalo, 1986; Comon and Golub, 1990, Badeau, 2004]). In these methods, data matrices are modified by addition or deletion of a row or column, or data covariance matrices are modified by addition of the outer product of a new vector. A recent paper by Brand [2006] provides a general and efficient method for arbitrary rank updates to an SVD. The purpose of this note is to describe a closely-related method for applications where right singular vectors are not required. This note also describes the SVD updates to a particular scenario of interest in seismic array signal processing. The particular application involve updating the wideband subspace representation used in seismic subspace detectors [Harris, 2006]. These subspace detectors generalize waveform correlation algorithms to detect signals that lie in a subspace of waveforms of dimension d {ge} 1. They potentially are of interest because they extend the range of waveform variation over which these sensitive detectors apply. Subspace detectors operate by projecting waveform data from a detection window into a subspace specified by a collection of orthonormal waveform basis vectors (referred to as the template). Subspace templates are constructed from a suite of normalized, aligned master event waveforms that may be acquired by a single sensor, a three-component sensor, an array of such sensors or a sensor network. The template design process entails constructing a data matrix whose columns contain the master event waveform data, then performing a singular value decomposition on the data matrix to extract an orthonormal basis for the waveform suite. The template typically is comprised of a subset of the left singular vectors corresponding to the larger singular values. The application involves updating a subspace template when new data become available, i.e. when new defining events are detected for a particular source. It often is the case that the waveforms corresponding to a particular source drift over time [Harris, 2001]. The Green's functions describing propagation can be altered because of changes in the source region. For example, if the source is a mine, signals from explosions may change gradually as a pit is extended (the source moves) or the scattering topography is altered by excavation. This motivates a tracking adjustment to a subspace representation. This note also comments on SVD updates for a related problem. In realistic pipeline operations it often is the case that data from one or more channels of an array are unusable (dead channels, channels with prolific dropouts, etc.). In such cases it is desirable to modify an array subspace template to operate on data only from the remaining usable channels. Furthermore, it is desirable to modify the templates directly without recourse to the original data matrix. Usually the template design process is separate from the application of the template in a detector to a continuous data stream. Consequently, the original data matrix may not be available for template modification at detector run time.

58 GEOSCIENCES↗

New portable sensor system for rotational seismic motion measurements

A new mechanical sensor system for recording the rotation of ground velocity has been constructed. It is based on measurements of differential motions between paired sensors mounted along the perimeter of a rigid (undeformable) disk. The elementary sensors creating the pairs are sensitive low-frequency geophones currently used in seismic exploration to record translational motions. The main features of the new rotational seismic sensor system are flat characteristics in the wide frequency range from 1 to 200 Hz and sensitivity limit of the order of 10{sup -8} rad/s. Notable advantages are small dimensions, portability, easy installation and operation in the field, and the possibility of calibrating the geophones in situ simultaneously with the measurement. An important feature of the instrument is that it provides records of translational seismic motions together with rotations, which allows many important seismological applications. We have used the new sensor system to record the vertical rotation velocity due to a small earthquake of M{sub L}=2.2, which occurred within the earthquake swarm in Western Bohemia in autumn 2008. We found good agreement of the rotation record with the transverse acceleration as predicted by theory. This measurement demonstrates that this device has a much wider application than just to prospecting measurements, for which it was originally designed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Note: Rotaphone, a new self-calibrated six-degree-of-freedom seismic sensor

We have developed and tested (calibration, linearity, and cross-axis errors) a new six-degree-of-freedom mechanical seismic sensor for collocated measurements of three translational and three rotational ground motion velocity components. The device consists of standard geophones arranged in parallel pairs to detect spatial gradients. The instrument operates in a high-frequency range (above the natural frequency of the geophones, 4.5 Hz). Its theoretical sensitivity limit in this range is 10{sup -9} m/s in ground velocity and 10{sup -9} rad/s in rotation rate. Small size and weight, and easy installation and maintenance make the instrument useful for local-earthquake recording and seismic prospecting.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Delineating Bukit Bunuh impact crater boundary by geophysical and geotechnical investigation

Evidences of crater morphology and shock metamorphism in Bukit Bunuh, Lenggong, Malaysia were found during the archaeological research conducted by the Centre for Global Archaeological Research Malaysia, Universiti Sains Malaysia. In order to register Bukit Bunuh as one of the world meteorite impact site, detailed studies are needed to verify the boundary of the crater accordingly. Geophysical study was conducted utilising the seismic refraction and 2-D electrical resistivity method. Seismic refraction survey was done using ABEM MK8 24 channel seismograph with 14Hz geophones and 40kg weight drop while 2-D electrical resistivity survey was performed using ABEM SAS4000 Terrameter and ES10-64C electrode selector with pole-dipole array. Bedrock depths were digitized from the sections obtained. The produced bedrock topography map shows that there is low bedrock level circulated by high elevated bedrock and interpreted as crater and rim respectively with diameter approximately 8km. There are also few spots of high elevated bedrock appear at the centre of the crater which interpreted as rebounds zone. Generally, the research area is divided into two layers where the first layer with velocity 400-1100 m/s and resistivity value of 10-800 Om predominantly consists of alluvium mix with gravel and boulders. Second layer represents granitic bedrock with depth of 5-50m having velocity >2100 m/s and resistivity value of >1500 Om. This research is strengthen by good correlation between geophysical data and geotechnical borehole records executed inside and outside of the crater, on the rim, as well as at the rebound area.

58 GEOSCIENCES↗

Design and development of digital seismic amplifier recorder

A digital seismic recording is a recording technique of seismic data in digital systems. This method is more convenient because it is more accurate than other methods of seismic recorders. To improve the quality of the results of seismic measurements, the signal needs to be amplified to obtain better subsurface images. The purpose of this study is to improve the accuracy of measurement by amplifying the input signal. We use seismic sensors/geophones with a frequency of 4.5 Hz. The signal is amplified by means of 12 units of non-inverting amplifier. The non-inverting amplifier using IC 741 with the resistor values 1KΩ and 1MΩ. The amplification results were 1,000 times. The results of signal amplification converted into digital by using the Analog Digital Converter (ADC). Quantitative analysis in this study was performed using the software Lab VIEW 8.6. The Lab VIEW 8.6 program was used to control the ADC. The results of qualitative analysis showed that the seismic conditioning can produce a large output, so that the data obtained is better than conventional data. This application can be used for geophysical methods that have low input voltage such as microtremor application.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Newberry Seismic Deployment Fieldwork Report

This report summarizes the seismic deployment of Lawrence Livermore National Laboratory (LLNL) Geotech GS-13 short-period seismometers at the Newberry Enhanced Geothermal System (EGS) Demonstration site located in Central Oregon. This Department of Energy (DOE) demonstration project is managed by AltaRock Energy Inc. AltaRock Energy had previously deployed Geospace GS-11D geophones at the Newberry EGS Demonstration site, however the quality of the seismic data was somewhat low. The purpose of the LLNL deployment was to install more sensitive sensors which would record higher quality seismic data for use in future seismic studies, such as ambient noise correlation, matched field processing earthquake detection studies, and general EGS microearthquake studies. For the LLNL deployment, seven three-component seismic stations were installed around the proposed AltaRock Energy stimulation well. The LLNL seismic sensors were connected to AltaRock Energy Gueralp CMG-DM24 digitizers, which are powered by AltaRock Energy solar panels and batteries. The deployment took four days in two phases. In phase I, the sites were identified, a cavity approximately 3 feet deep was dug and a flat concrete pad oriented to true North was made for each site. In phase II, we installed three single component GS-13 seismometers at each site, quality controlled the data to ensure that each station was recording data properly, and filled in each cavity with native soil.

15 GEOTHERMAL ENERGY↗

Auto-Curation of Seismic Event Data for Signal Denoising

Denoising contaminated seismic signals for later processing is a fundamental problem in seismic signals analysis. Neural network approaches have shown success denoising local signals when trained on short-time Fourier transform spectrograms. One challenge of this approach is the onerous process of hand-labeling event signals for training. By leveraging the SCALODEEP seismic event detector, we develop an automated set of techniques for labeling event data. Despite region specific challenges, training the neural network denoiser on machine curated events shows comparable performance to the neural network trained on hand curated events. We showcase our technique with two experiments, one using Utah regional data and one using regional data from the Korean peninsula.

58 GEOSCIENCES↗