SEARCH · Engineering Papers

Results for “SCaN Architecture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS2004

The Hydrosphere State (HYDROS) Mission

The Hydrosphere State (HYDROS) Mission has been selected for the National Aeronautics and Space Administration (NASA) Earth System Science Pathfinder (ESSP) program. The objectives of HYDROS are to provide frequent, global measurements of surface soil moisture and surface freeze/thaw state. In order to adequately measure these geophysical parameters, a system capable of simultaneously measuring L-Band radiometer brightness temperatures at 40 km resolution and L-Band radar backscatter at 3 km resolution over a very wide swath is required. In addition, these science requirements must be satisfied under the stringent cost-cap imposed on all ESSP missions. As a solution to this challenging set of requirements, a relatively large, six meter, conically-scanning reflector antenna architecture was selected for the mission design. The HYDROS instrument will fly on a General Dynamics SA-200HP spacecraft bus. Although large deployable mesh antennas have been used in communication applications, this will mark the first time such technology is applied in a rotating configuration for high-resolution remote sensing.

radar↗

NASA NTRS2004

The HYDROS Radiometer/Radar Instrument

The science objectives of the HYDROS mission are to provide frequent, global measurements of surface soil moisture and surface freeze/thaw state. In order to adequately measure these geophysical quantities, the key instrument requirements were determined by the HYDROS science team to be: 1) Dual-polarization L-Band passive radiometer measurements at 40 km resolution, 2) Dual-polarization L-Band active radar measurements at 3 km resolution, and 3) A wide swath to insure global three day refresh time for these measurements (1000 km swath at the selected orbit altitude of 670 km). As a solution to this challenging set of instrument requirements, a relatively large, 6 meter, conically-scanning reflector antenna architecture was selected for the instrument design. The deployable mesh antenna is shared by both the radiometer and radar electronics by employing a single L-Band feed.

freeze thaw↗

NASA NTRS2015

Bone Loss During Spaceflight: Available Models and Counter-Measures

There is ongoing concern for human health during spaceflights. Of particular interest is the uncoupling of bone remodeling and its resultant effect on calcium metabolism and bone loss. The calculated average loss of bone mineral density (BMD) is approximately 1-1.5% per month of spaceflight. The effect of decreased BMD on associated fractures in astronauts is not known. Currently on the International Space Station (ISS), bone loss is managed through dietary supplements and modifications and resistance exercise regimen. As the duration of space flights increases, a review of the current methods available for the prevention of bone loss is warranted. The goal of this project is to review and summarize recent studies that have focused on maintaining BMD during exposure to microgravity. Interventions were divided into physical (Table 1), nutritional (Table 2), or pharmacologic (Table 3) categories. Physical modalities included resistance exercise, low level vibration, and low intensity pulsed ultrasound. Nutritional interventions included altering protein, salt, and fat intake; and vitamin D supplementation. Pharmacologic interventions included the use of bisphosphonates and beta blockers. Studies reported outcomes based on bone density determined by DXA bone scan, micro-architecture of histology and microCT, and serum and urine markers of bone turnover. The ground analog models utilized to approximate osseous physiology in microgravity included human patients previously paralyzed or subjects confined to bedrest. Ground analog animal models include paralysis, immobilization and ovariectomies. As a result of the extensive research performed there is a multi-modality approach available for the management of BMD during spaceflight that includes resistance training, nutrition and dietary supplements. However, there is a paucity of literature describing a formalized tiered protocol to guide investigators through the progression from animal models to human patient ground analogs to experiments on the ISS. With regards to testing, further evaluation to determine the association between non-invasive tests and fracture during and after spaceflight needs to be performed.

Morris, Jonathan↗

NASA NTRSDate not supplied

A New Architecture for Parallelization of Complex Spacecraft Trajectory Optimization Scans

This paper describes CopScanner, a new component of the Copernicus ecosystem for spacecraft trajectory design and optimization. CopScanner is a Python library being developed at the NASA JSC which enables easy parallelization of Copernicus scans. CopScanner is currently being developed and implemented for production of Copernicus trajectory scans for upcoming Artemis Missions (Artemis II and beyond). On the backend, CopScanner utilizes Dask, an open-source Python library for parallel computing which enables parallelization over both multi-core local machines and large-scale distributed computing clusters. CopScanner abstracts the trajectory scanning process into a DAG which is constructed using a chain of individual subscans. Each node in the DAG executes a python module, called the callable, for which there are built-in defaults, or users may specify their own. Support for custom callables makes CopScanner a versatile trajectory optimization software. All output files and associated metadata from a CopScanner scan are compressed and stored in a two-file output, collectively called the FileStore, consisting of a SQLite database and a compressed JSON MessagePack file, for which CopScanner provides a Python class for interaction.

Quentin Moore↗

NASA NTRS2012

Performance Analysis of a NASA Integrated Network Array

The Space Communications and Navigation (SCaN) Program is planning to integrate its individual networks into a unified network which will function as a single entity to provide services to user missions. This integrated network architecture is expected to provide SCaN customers with the capabilities to seamlessly use any of the available SCaN assets to support their missions to efficiently meet the collective needs of Agency missions. One potential optimal application of these assets, based on this envisioned architecture, is that of arraying across existing networks to significantly enhance data rates and/or link availabilities. As such, this document provides an analysis of the transmit and receive performance of a proposed SCaN inter-network antenna array. From the study, it is determined that a fully integrated internetwork array does not provide any significant advantage over an intra-network array, one in which the assets of an individual network are arrayed for enhanced performance. Therefore, it is the recommendation of this study that NASA proceed with an arraying concept, with a fundamental focus on a network-centric arraying.

Nessel, James A.↗

DOE OSTI2021

Deep learning approaches to semantic segmentation of fatigue cracking within cyclically loaded nickel superalloy

Improvements to synchrotron-based micro-computed tomography scanning capabilities have gifted researchers the ability to characterize 4D material thermomechanical responses more thoroughly than ever before. These advancements, however, have brought about new challenges in analyzing the resulting deluge of data. We report on a nickel-based superalloy specimen imaged 26 times in-situ during cyclic loading at Argonne National Laboratory Advanced Photon Source beamline 1ID, in order to monitor crack growth within the microstructure. Therefore, several deep learning approaches which utilize convolutional neural networks are implemented to segment crack features from reconstructed tomography scans. U-Net architecture implementations are found to be especially effective, achieving IoU = 0.995 +/- 0.004 and Matthews correlation coefficient scores of Φ = 0.826 +/- 0.085. These advancements broaden possibilities for scientists seeking to automate segmentation analyses of similar large datasets.

36 MATERIALS SCIENCE↗

NASA NTRS2008

Architecture Modeling and Performance Characterization of Space Communications and Navigation (SCaN) Network Using MACHETE

As future space exploration missions will involve larger number of spacecraft and more complex systems, theoretical analysis alone may have limitations on characterizing system performance and interactions among the systems. Simulation tools can be useful for system performance characterization through detailed modeling and simulation of the systems and its environment...This paper reports the simulation of the Orion (Crew Exploration Vehicle) to the International Space Station (ISS) mission where Orion is launched by Ares into orbit on a 14-day mission to rendezvous with the ISS. Communications services for the mission are provided by the Space Communication and Navigation (SCaN) network infrastructure which includes the NASA Space Network (SN), Ground Network (GN) and NASA Integrated Services Network (NISN). The objectives of the simulation are to determine whether SCaN can meet the communications needs of the mission, to demonstrate the benefit of using QoS prioritization, and to evaluate network-key parameters of interest such as delay and throughout.

space based networking↗

NASA NTRS2001

Optimizing Orbit-Instrument Configuration for Global Precipitation Mission (GPM) Satellite Fleet

Following the scientific success of the Tropical Rainfall Measuring Mission (TRMM) spearheaded by a group of NASA and NASDA scientists, their external scientific collaborators, and additional investigators within the European Union's TRMM Research Program (EUROTRMM), there has been substantial progress towards the development of a new internationally organized, global scale, and satellite-based precipitation measuring mission. The highlights of this newly developing mission are a greatly expanded scope of measuring capability and a more diversified set of science objectives. The mission is called the Global Precipitation Mission (GPM). Notionally, GPM will be a constellation-type mission involving a fleet of nine satellites. In this fleet, one member is referred to as the "core" spacecraft flown in an approximately 70 degree inclined non-sun-synchronous orbit, somewhat similar to TRMM in that it carries both a multi-channel polarized passive microwave radiometer (PMW) and a radar system, but in this case it will be a dual frequency Ku-Ka band radar system enabling explicit measurements of microphysical DSD properties. The remainder of fleet members are eight orbit-synchronized, sun-synchronous "constellation" spacecraft each carrying some type of multi-channel PMW radiometer, enabling no worse than 3-hour diurnal sampling over the entire globe. In this configuration the "core" spacecraft serves as a high quality reference platform for training and calibrating the PMW rain retrieval algorithms used with the "constellation" radiometers. Within NASA, GPM has advanced to the pre-formulation phase which has enabled the initiation of a set of science and technology studies which will help lead to the final mission design some time in the 2003 period. This presentation first provides an overview of the notional GPM program and mission design, including its organizational and programmatic concepts, scientific agenda, expected instrument package, and basic flight architecture. Following this introduction, we focus specifically on the last topic, that being an analysis which leads to an optimal flight architecture dictated in part by science requirements but constrained by allowable orbital mechanics, instrument scan patterns, and antenna aperture properties. Because the optimal architecture involves an interplay between orbit mechanics and instrument specifications, it is important to recognize that in attempting to serve various scientific themes, the final optimal architecture will represent a compromise concerning dynamic range, spatial resolution, sampling interval, pointing, beam coincidence, and measurement uncertainty. Moreover, cost becomes a major factor in seeking the optimal architecture through the pathways of antenna and instrument scan designs, as well as propulsion requirements associated with the orbit heights of various "constellation" members. Although the results presented at the IGARSS-2001 meeting will likely not be the fully refined flight architecture specifications, they are expected to be nearly complete.

Smith, Eric A.↗

NASA NTRS2017

On the Development and Application of High Data Rate Architecture (HiDRA) in Future Space Networks

Historically, space missions have been severely constrained by their ability to downlink the data they have collected. These constraints are a result of relatively low link rates on the spacecraft as well as limitations on the time during which data can be sent. As part of a coherent strategy to address existing limitations and get more data to the ground more quickly, the Space Communications and Navigation (SCaN) program has been developing an architecture for a future solar system Internet. The High Data Rate Architecture (HiDRA) project is designed to fit into such a future SCaN network. HiDRA's goal is to describe a general packet-based networking capability which can be used to provide assets with efficient networking capabilities while simultaneously reducing the capital costs and operational costs of developing and flying future space systems.Along these lines, this paper begins by reviewing various characteristics of modern satellite design as well as relevant characteristics of emerging technologies (such as free-space optical links capable of working at 100+ Gbps). Next, the paper describes HiDRA's design, and how the system is able to both integrate and support the operation of not only today's high-rate systems, but also the high-rate systems likely to be found in the future. This section also explores both existing and future networking technologies, such as Delay Tolerant Networking (DTN) protocol (RFC4838 citeRFC:1, RFC5050citeRFC:2), and explains how HiDRA supports them. Additionally, this section explores how HiDRA is used for scheduling data movement through both proactive and reactive link management. After this, the paper moves on to explore a reference implementation of HiDRA. This implementation is currently being realized based on a Field Programmable Gate Array (FPGA) memory and interface controller that is itself controlled by a local computer running DTN software. Next, this paper explores HiDRA's natural evolution, which includes an integration path for software-defined networking (SDN) switches. This section also describes considerations for both near-Earth and deep-space instantiations of HiDRA, describing how differences in latencies between the environments will necessarily influence how the system is configured and the networks operate. Finally, this paper describes future work. This section includes a description of a potential ISS implementation which will allow rapid advancement through the technology readiness levels (TRL). This section also explores work being done to support HiDRA's successful implementation and operation in a heterogeneous network: such a network could include communications equipment spanning many vintages and capabilities, and one significant aspect of HiDRA's future development involves balancing compatibility with capability.

DTN↗

NASA NTRS2012

NASA Integrated Network Monitor and Control Software Architecture

The National Aeronautics and Space Administration (NASA) Space Communications and Navigation office (SCaN) has commissioned a series of trade studies to define a new architecture intended to integrate the three existing networks that it operates, the Deep Space Network (DSN), Space Network (SN), and Near Earth Network (NEN), into one integrated network that offers users a set of common, standardized, services and interfaces. The integrated monitor and control architecture utilizes common software and common operator interfaces that can be deployed at all three network elements. This software uses state-of-the-art concepts such as a pool of re-programmable equipment that acts like a configurable software radio, distributed hierarchical control, and centralized management of the whole SCaN integrated network. For this trade space study a model-based approach using SysML was adopted to describe and analyze several possible options for the integrated network monitor and control architecture. This model was used to refine the design and to drive the costing of the four different software options. This trade study modeled the three existing self standing network elements at point of departure, and then described how to integrate them using variations of new and existing monitor and control system components for the different proposed deployments under consideration. This paper will describe the trade space explored, the selected system architecture, the modeling and trade study methods, and some observations on useful approaches to implementing such model based trade space representation and analysis.

Next Generation Uplink↗

NASA NTRS1981

An advanced programmable/reconfigurable color graphics display system for crew station technology research

The hardware configuration, software organization, and applications software for the NASA IKONAS color graphics display system are described. The systems were created at the Langley Research Center Display Device Laboratory to develop, evaluate, and demonstrate advanced generic concepts, technology, and systems integration techniques for electronic crew station systems of future civil aircraft. A minicomputer with 64K core memory acts as a host for a raster scan graphics display generator. The architectures of the hardware system and the graphics display system are provided. The applications software features a FORTRAN-based model of an aircraft, a display system, and the utility program for real-time communications. The model accepts inputs from a two-dimensional joystick and outputs a set of aircraft states. Ongoing and planned work for image segmentation/generation, specialized graphics procedures, and higher level language user interface are discussed.

Montoya, R. J.↗

NASA NTRS2021

A Distributed Approach to High-Rate Delay Tolerant Networking Within a Virtualized Environment

The High-Rate Delay Tolerant Networking (HDTN) project has taken a distributed service-based approach to the development of a highly efficient delay tolerant networking (DTN) implementation. Through the analysis of many DTN implementations, system and mission requirements as well as the DTN protocol specifications, HDTN has worked to infuse modern computing technologies into the NASA approach to interplanetary networking. The initial use case of the HDTN software runs on a hypervisor representative of the International Space Station (ISS) DTN Gateway. In this scenario, multiple emulated payloads will send science data through HDTN to a mission operations center. HDTN will provide store and forward capability as well as network flow management. This paper discusses the infusion path of cognitive networking technologies in the NASA SCaN networks using the DTN architecture and protocols as the basis for cognitive routing and network management capabilities. HDTN has been developing the Bundle Protocol encoding and decoding mechanisms and messaging framework that can be used as the basis for integrating DTN with various learning and decision-making processes. The concepts of distributed computing, network virtualization, software defined networking and delay tolerant networking are basic building blocks which will further the development of cognitive networking. In addition to discussion of the HDTN software development and testing, this paper examines the role that each of these technologies play in the evolution of the current state of space networking into an intelligent network of networks.

Delay Tolerant Networking↗

NASA NTRSDate not supplied

A Distributed Approach to High-Rate Delay Tolerant Networking Within a Virtualized Environment

The High-Rate Delay Tolerant Networking (HDTN) project has taken a distributed service-based approach to the development of a highly efficient delay tolerant networking (DTN) implementation. Through the analysis of many DTN implementations, system and mission requirements as well as the DTN protocol specifications, HDTN has worked to infuse modern computing technologies into the NASA approach to interplanetary networking. The initial use case of the HDTN software runs on a hypervisor representative of the International Space Station (ISS) DTN Gateway. In this scenario, multiple emulated payloads will send science data through HDTN to a mission operations center. HDTN will provide store and forward capability as well as network flow management. This paper discusses the infusion path of cognitive networking technologies in the NASA Space Communications and Navigation (SCaN) networks using the DTN architecture and protocols as the basis for cognitive routing and network management capabilities. HDTN has been developing the Bundle Protocol encoding and decoding mechanisms and messaging framework that can be used as the basis for integrating DTN with various learning and decision-making processes. The concepts of distributed computing, network virtualization, software defined networking and delay tolerant networking are basic building blocks which will further the development of cognitive networking. In addition to discussion of the HDTN software development and testing, this paper examines the role that each of these technologies play in the evolution of the current state of space networking into an intelligent network of networks.

Rachel Mary Dudukovich↗

DOE OSTI2020

Intra- and Intermolecular Self-Assembly of a 20-nm-Wide Supramolecular Hexagonal Grid.

For the past three decades, the coordination-driven self-assembly of three-dimensional structures has undergone rapid progress; however, parallel efforts to create large discrete two-dimensional architectures-as opposed to polymers-have met with limited success. The synthesis of metallo-supramolecular systems with well-defined shapes and sizes in the range of 10-100 nm remains challenging. Here we report the construction of a series of giant supramolecular hexagonal grids, with diameters on the order of 20 nm and molecular weights greater than 65 kDa, through a combination of intra- and intermolecular metal-mediated self-assembly steps. The hexagonal intermediates and the resulting self-assembled grid architectures were imaged at submolecular resolution by scanning tunnelling microscopy. Characterization (including by scanning tunnelling spectroscopy) enabled the unambiguous atomic-scale determination of fourteen hexagonal grid isomers.

Zhang, Zhe↗

NASA NTRS2014

TBS (Trabecular Bone Score) Expands Understanding of Spaceflight Effects on the Lumbar Spine of Long-Duration Astronauts

Bone loss due to long‐duration spaceflight has been characterized by both DXA and QCT serial scans. It is unclear if these spaceflight‐induced changes in bone mineral density (BMD) and structure result in increased fracture incidence. NASA astronauts currently fly 5 to 6‐month missions on the International Space Station (ISS) and at least one 12‐month mission is planned. While NASA has measured areal BMD (by DXA) and volumetric BMD (by QCT) and has estimated hip strength (by finite element models of QCT data, no method has yet been used to examine bone micro‐architecture from lumbar spine (LS). DXA scans are routinely performed pre‐ and postflight on all ISS astronauts to follow BMD changes associated with spaceflight. Trabecular Bone Score (TBS) is a relatively new method that measures grey‐scale‐level texture information extracted from LS DXA images and correlates with 3D parameters of bone micro‐architecture. We evaluated the ability of LS TBS to discriminate changes in astronauts who have flown on ISS missions and to determine if TBS can provide additional information compared to DXA. Methods: Lumbar Spine (L1‐4) DXA scans from 51 astronauts (mean age, 47 +/- 4 yrs) were divided into 3 groups based on the exercise regimens performed onboard the ISS. "Pre‐ARED" (exercise using a load‐limited resistive exercise device, <300 lb), "ARED" (exercise with a high‐load resistive exercise device, up to 600 lb) and "Bisphos+ARED" group (ARED exercise and a 70‐mg alendronate tablet once a week before and during flight, starting 17 days before launch). DXA scans were performed and analyzed on a Hologic Discovery W using the same technician for the pre‐ and post‐flight scans. LSC for the LS in our laboratory is 0.025 g/sq. cm. TBS was performed at the Mercy Hospital, Cincinnati, Ohio on a similar Hologic computer. Data were analyzed using a paired, 2‐tailed Student's t‐test for the difference between pre‐ and postflight means. Percent change and % change per month are noted. Interpretation: Our data suggest that: TBS and DXA both detected significant decrements in the LS in these pre‐ ARED astronauts, not unexpected given the insufficient loads provided by this early exercise device. TBS did not detect significant changes in the ARED or Bisphos+ARED groups while DXA did detect significant changes in the ARED astronauts. These findings suggest that DXA and TBS are detecting independent effects of bone loss interventions tested in ISS astronauts in space, which may be due to distinct effects of interventions on mineral content of separate cortical vs. trabecular bone. Conclusion: TBS, in conjunction with DXA BMD, may provide additional insight into the nature of changes (or lack thereof) in the microstructure of trabecular bone and the areal BMD of vertebral bodies.

Smith, Scott A.↗

DOE OSTI2023

Ionic Liquid-Mediated Scanning Probe Electro-Oxidative Lithography as a Novel Tool for Engineering Functional Oxide Micro- and Nano-Architectures

Functional oxides have extensively been investigated as a promising class of materials in a broad range of innovative applications. Harnessing the novel properties of functional oxides in micro- to nano-scale applications hinges on establishing advanced fabrication and manufacturing techniques able to synthesize these materials in an accurate and reliable manner. Oxidative scanning probe lithography (o-SPL), an atomic force microscopy (AFM) technique based on anodic oxidation at the water meniscus formed at the tip/substrate contact, not only combines the advantages of both “top-down” and “bottom-up” fabrication approaches, but also offers the possibility of fabricating oxide nanomaterials with high patterning accuracy. While the use of self-assembled monolayers (SAMs) broadened the application of o-SPL, significant challenges have emerged owing to the relatively limited number of SAM/solid surface combinations that can be employed for o-SPL, which constrains the ability to control the chemistry and structure of oxides formed by o-SPL. Here, in this work, a new o-SPL technique that utilizes room-temperature ionic liquids (RTILs) as the functionalizing material to mediate the electrochemistry at AFM tip/substrate contacts is reported. The results show that the new IL-mediated o-SPL (IL-o-SPL) approach allows sub-100 nm oxide features to be patterned on a model solid surface, namely steel, with an initiation voltage as low as -2 V. Moreover, this approach enables high tunability of both the chemical state and morphology of the patterned iron oxide structures. Owing to the high chemical compatibility of ILs, which derives from the possibility of synthesizing ILs able to adsorb on a wide variety of solid surfaces, IL-o-SPL can be extended to other material surfaces and provide the opportunity to accurately tailor the chemistry, morphology, and electronic properties within nanoscale domains, thus opening new pathways to the development of novel micro- and nano-architectures for advanced integrated devices.

36 MATERIALS SCIENCE↗

NASA NTRS1992

Future benefits and applications of intelligent on-board processing to VSAT services

The trends and roles of VSAT services in the year 2010 time frame are examined based on an overall network and service model for that period. An estimate of the VSAT traffic is then made and the service and general network requirements are identified. In order to accommodate these traffic needs, four satellite VSAT architectures based on the use of fixed or scanning multibeam antennas in conjunction with IF switching or onboard regeneration and baseband processing are suggested. The performance of each of these architectures is assessed and the key enabling technologies are identified.

Price, Kent M.↗

NASA NTRS1992

Technology requirements for mesh VSAT applications

This paper first examines the trends and the roles of VSAT services in the year 2010 time frame based on an overall network and service model for that period. An estimate of the VSAT traffic is then made and the service and general network requirements are identified. In order to accommodate these traffic needs, four satellite VSAT architectures based on the use of fixed or scanning multibeam antennas in conjunction with IF switching or onboard regeneration and baseband processing are suggested. The performance of each of these architectures is assessed and the key enabling technologies are identified.

Kwan, R. K.↗