Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SBr”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Materials Data on CeSb(SBr)2 by Materials Project

CeSbS2Br2 crystallizes in the monoclinic P2_1/c space group. The structure is two-dimensional and consists of two CeSbS2Br2 sheets oriented in the (0, 0, 1) direction. there are two inequivalent Ce3+ sites. In the first Ce3+ site, Ce3+ is bonded in a 9-coordinate geometry to three S2- and six Br1- atoms. There are a spread of Ce–S bond distances ranging from 2.96–3.34 Å. There are a spread of Ce–Br bond distances ranging from 3.10–3.39 Å. In the second Ce3+ site, Ce3+ is bonded in a 9-coordinate geometry to five S2- and four Br1- atoms. There are a spread of Ce–S bond distances ranging from 3.00–3.18 Å. There are a spread of Ce–Br bond distances ranging from 3.09–3.21 Å. There are two inequivalent Sb3+ sites. In the first Sb3+ site, Sb3+ is bonded in a 3-coordinate geometry to three S2- atoms. There are a spread of Sb–S bond distances ranging from 2.46–2.57 Å. In the second Sb3+ site, Sb3+ is bonded in a distorted T-shaped geometry to three S2- atoms. There are a spread of Sb–S bond distances ranging from 2.44–2.55 Å. There are four inequivalent S2- sites. In the first S2- site, S2- is bonded in a 4-coordinate geometry to three Ce3+ and one Sb3+ atom. In the second S2- site, S2- is bonded in a 3-coordinate geometry to one Ce3+ and two Sb3+ atoms. In the third S2- site, S2- is bonded in a 2-coordinate geometry to one Ce3+ and two Sb3+ atoms. In the fourth S2- site, S2- is bonded in a 4-coordinate geometry to three Ce3+ and one Sb3+ atom. There are four inequivalent Br1- sites. In the first Br1- site, Br1- is bonded in a 3-coordinate geometry to three Ce3+ atoms. In the second Br1- site, Br1- is bonded in an L-shaped geometry to two Ce3+ atoms. In the third Br1- site, Br1- is bonded in an L-shaped geometry to two Ce3+ atoms. In the fourth Br1- site, Br1- is bonded in a 3-coordinate geometry to three Ce3+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Cu3P4(SBr)3 by Materials Project

(CuBr)3P4S3 crystallizes in the orthorhombic Pnma space group. The structure is two-dimensional and consists of four tetraphosphorus trisulfide molecules and two CuBr sheets oriented in the (0, 0, 1) direction. In each CuBr sheet, there are two inequivalent Cu+1.67+ sites. In the first Cu+1.67+ site, Cu+1.67+ is bonded in a distorted trigonal non-coplanar geometry to three Br1- atoms. There are one shorter (2.46 Å) and two longer (2.51 Å) Cu–Br bond lengths. In the second Cu+1.67+ site, Cu+1.67+ is bonded in a distorted trigonal non-coplanar geometry to three Br1- atoms. There are a spread of Cu–Br bond distances ranging from 2.48–2.54 Å. There are two inequivalent Br1- sites. In the first Br1- site, Br1- is bonded in a trigonal non-coplanar geometry to three Cu+1.67+ atoms. In the second Br1- site, Br1- is bonded in a distorted trigonal non-coplanar geometry to three Cu+1.67+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

BioGeoChemistry of Actinides (LLNL SFA OBER - SBR FY20 Program Management and Performance Report)

The focus of the BioGeoChemistry of Actinides SFA is to identify and quantify the biogeochemical processes and the underlying mechanisms that control actinide mobility in an effort to reliably predict and control the cycling and migration of actinides in the environment. The research approach includes: (1) Field Studies (Research Thrust 1) that capture actinide behavior on the timescale of decades and (2) Fundamental Laboratory Studies (Research Thrust 2) that isolate specific biogeochemical processes observed in the field. These research thrusts are underpinned by the unique capabilities and staff expertise at Lawrence Livermore National Laboratory (LLNL), allowing the BioGeoChemistry of Actinides SFA to advance our understanding of actinide migration behavior in the environment, and serve as an international resource for environmental radiochemistry research (Figure 1). Research Thrusts 1 and 2 are guided by broad central hypotheses: Thrust 1 Hypothesis: Biogeochemical processes occurring on the timescale of years to decades lead to greater actinide recalcitrance in sediments and limit their migration in surface and groundwater. Thrust 2 Hypothesis: Long-term biogeochemical processes include mineral and surface alteration, which leads to stabilization of actinide surface associations or incorporation into mineral precipitates. Our strategic goal is to use the knowledge gained from our Science Plan to advance our understanding of the behavior of actinides, providing DOE with the scientific basis for remediation and long-term stewardship of DOE’s legacy sites and, more broadly, increasing our understanding of transport phenomena in environmental systems sciences with a particular emphasis on environmentally relevant (long-term) timescales. Although our focus is on actinide biogeochemistry, the increased focus on biogeochemistry at unique Test Bed locations associated with this SFA is providing fundamental information on redox processes and associated microbiological processes that control the cycling of redox sensitive metals under dynamic and transient biogeochemical conditions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Styrene-Based Elastomer Composites with Functionalized Graphene Oxide and Silica Nanofiber Fillers: Mechanical and Thermal Conductivity Properties

The mechanical and thermal conductivity properties of two composite elastomers were studied. Styrene–butadiene rubber (SBR) filled with functionalized graphene oxide (GO) and silica nanofibers, and styrene–butadiene–styrene (SBS) block copolymers filled with graphene oxide. For the SBR composites, GO fillers with two different surface functionalities were synthesized (cysteamine and dodecylamine) and dispersed in the SBR using mechanical and liquid mixing techniques. The hydrophilic cysteamine-based GO fillers were dispersed in the SBR by mechanical mixing, whereas the hydrophobic dodecylamine-based GO fillers were dispersed in the SBR by liquid mixing. Silica nanofibers (SnFs) were fabricated by electrospinning a sol–gel precursor solution. The surface chemistry of the functionalized fillers was studied in detail. The properties of the composites and the synergistic improvements between the GO and SnFs are presented. For the SBS composites, GO fillers were dispersed in the SBS elastomer at several weight percent loadings using liquid mixing. Characterization of the filler material and the composite elastomers was performed using x-ray photoelectron spectroscopy, x-ray diffraction, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, dynamic mechanical analysis, tensile testing, nanoindentation, thermal conductivity and abrasion testing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Long-term effects of cycle time and volume exchange ratio on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) production from food waste digestate by Haloferax mediterranei cultivated in sequencing batch reactors for 450 days

Food waste digestate was fed into a sequencing batch reactor (SBR) for Haloferax mediterranei (HM) to produce poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). This SBR was operated uninterruptedly for 450 days to test its stability, during which the cycle time and volume exchange ratio were varied to understand their impacts on the PHBV fermentation performance under ranged organic loading rates (OLR). Results showed that 1) PHBV productivity was proportional to OLR of food waste digestate; 2) substrate and product inhibitions were two limiting factors constraining substrate utilization and PHBV yields; 3) PHBV titer was dependent on the hydraulic retention time of the SBR while a volume exchange ratio lower than 0.5 is unfavorable due to the product inhibitor accumulation. Furthermore, this study for the first time demonstrated that the long-term stability of food waste-fed PHBV production by HM and revealed that inhibition effects could be barriers in SBR limiting the full-scale application of the technology.

09 BIOMASS FUELS↗
DOE OSTI2021

Mechanical Characterization of Low Modulus Polymer-Modified Calcium-Silicate-Hydrate (C-S-H) Binder

Calcium-silicate-hydrate (C-S-H) represents a key microstructural phase that governs the mechanical properties of concrete at a large scale. Defects in the C-S-H phase are also responsible for the poor ductility and low tensile strength of concrete. Manipulating the microstructure of C-S-H can lead to new cementitious materials with improved structural performance. This paper presents an experimental investigation aiming to characterize a new synthetic polymer-modified synthetic calcium-silicate-hydrate (C-S-H)/styrene-butadiene rubber (SBR) binder. The new C-S-H/SBR binder is produced by calcining calcium carbonate and mixing this with fumed silica (SiO 2 ), deionized water and SBR. Mechanical, physical, chemical and microstructural characterization was conducted to measure the properties of new hardened C-S-H binder. Results from the experimental investigation demonstrate the ability to engineer a new C-S-H binder with low elastic modulus and improved toughness and bond strength by controlling the SBR content and method of C-S-H synthesis. The new binder suggests the possible development of a new family of low-modulus silica-polymer binders that might fit many engineering applications such as cementing oil and gas wells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Analytical characterization of laser induced plasmas towards uranium isotopic analysis in gaseous uranium hexafluoride

To perform direct enrichment assay on gaseous uranium hexafluoride (UF 6 ) with laser induced breakdown spectroscopy (LIBS), the dominant spectral-line features, evolution of the signal and background of the U II 424.437 nm line, and its Stark width and shift, were studied as a function of UF 6 gas pressure and pulse energy of a nanosecond Nd:YAG laser. In this work, vapor pressure of UF 6 was found to be the most important parameter for LIBS analysis of gaseous UF 6 . Spectral congestion with numerous U lines of high excitation potential was observed and signal-to-background ratio (SBR) was low for measurements with 80 Torr UF 6 . Only when both UF 6 vapor pressure and laser pulse energy were low, for example, less than 20 Torr pressure and 30 mJ pulse energy, the resultant LIBS spectra from gaseous UF 6 resembled those obtained from solid U samples. The experimental data also suggest that U and F atoms recombine back to UF 6 after the laser pulse. The U emission was found to decay fast with a persistent background signal, degrading SBR with delay time. Systematic positive biases were found for UF 6 enrichment assays performed with the 235 U– 238 U line pair at 424.412–424.437 nm, which was confirmed to be caused by self-absorption. Even with optimization of experimental parameters and incorporation of a self-absorption term into the spectral-fitting algorithm, to reduce and compensate for self-absorption, self-absorption is still a main factor limiting accurate UF 6 enrichment assay. The use of another spectral window which contains no resonance lines is a prospective solution for the self-absorption issue.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Materials Data on S3Br by Materials Project

(S)2SBr crystallizes in the tetragonal I4/mmm space group. The structure is two-dimensional and consists of two S sheets oriented in the (0, 0, 1) direction and two SBr sheets oriented in the (0, 0, 1) direction. In each S sheet, S+1.67- is bonded in a square co-planar geometry to four equivalent S+1.67- atoms. All S–S bond lengths are 2.50 Å. In each SBr sheet, S+1.67- is bonded in a square co-planar geometry to four equivalent Br5+ atoms. All S–Br bond lengths are 2.50 Å. Br5+ is bonded in a square co-planar geometry to four equivalent S+1.67- atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Organic Solvent Free Process to Fabricate High Performance Silicon/Graphite Composite Anode

Cycling stability is a key challenge for application of silicon (Si)-based composite anodes as the severe volume fluctuation of Si readily leads to fast capacity fading. The binder is a crucial component of the composite electrodes. Although only occupying a small amount of the total composite mass, the binder has major impact on the long-term electrochemical performance of Si-based anodes. In recent years, water-based binders including styrene-butadiene rubber (SBR) and carboxymethyl cellulose (CMC) have attracted wide research interest as eco-friendly and low-cost alternatives for the conventional poly(vinylidene difluoride) (PVDF) binder in Si anodes. In this study, Si-based composite anodes are fabricated by simple solid mixing of the active materials with subsequent addition of SBR and CMC binders. This approach bypasses the use of toxic and expansive organic solvents. The factors of binder, silicon, and graphite materials have been systematically investigated. It is found that the retained capacities of the anodes are more than 440 mAh/g after 400 cycles. These results indicate that organic solvent free process is a facile strategy for producing high performance silicon/graphite composite anodes.

Fang, Chen (ORCID:0000000321011991)↗
DOE OSTI2021

Swell Behavior of Elastomers with a Hydrothermal Liquefaction Bio-Crude and a Fast Pyrolysis Bio-Oil

The compatibility of seventeen elastomer materials with two heavy biofuels (fast pyrolysis bio-oil and hydrothermal liquefaction (HTL) bio-crude) and diesel was assessed through volume change measurements. The elastomers included two fluorocarbons, six acrylonitrile rubbers (NBRs), and one each of fluorosilicone, neoprene, polyurethane, silicone, epichlorohydrin rubber (ECO), a blend of polyvinyl chloride and NBR (OZO), styrene butadiene rubber (SBR), hydrogenated NBR (HNBR) and ethylene propylene diene monomer (EPDM). The specimens were immersed in each test fuel for four weeks at 50°C and then measured for volume change. Afterwards, the specimens were dried, and the volume was remeasured. Ingeneral, the bio-oil produced unacceptable swelling in the fluoroelastomers, ECO, OZO, neoprene, polyurethane, SBR, HNBR, EPDM, silicone and five of the NBRs. In most cases, the HTL bio-crude produced lower (though still unacceptable) swelling than the bio-oil. Materials that showed good compatibility with the HTL biocrude were the fluoroelastomers, OZO, and silicone.

Kass, Michael↗
DOE OSTI2022

Interfacial Effects on the Dielectric Properties of Elastomer Composites and Nanocomposites

Elastomer-based composites and nanocomposites are discussed, with the emphasis on the filler and interfacial effects on their dynamics, and the resulting manifestation in their macroscopic dielectric or mechanical response. Specifically, selected polydimethylsiloxane (PDMS)/barium-titanate and styrene-butadiene rubber (SBR)/graphene oxide nanocomposites are discussed, as examples where controlled spatial distribution of filler (structured composites) gives rise to significantly different dielectric and thermomechanical behaviors. Also, ethylene–propylene–diene (EPDM)/carbon black (CB) composites are presented, as examples of systems that exhibit an abnormal temperature dependence of dielectric relaxation; and this response is discussed in the context of CB cluster polarization and quantified through a simple scaling model of the same. Finally, multi-filler EPDM/CB/ceramic elastomer nanocomposites are discussed, as examples of systems with antagonistic interfacial effects between conductive and dielectric fillers, as well as with strong interphase responses that can overwhelm the dielectric contributions from the fillers; in these systems, interphasial responses result in counter-intuitive dielectric behaviors and in strong deviations from standard design principles typically employed in the design of dielectric composite systems.

Li, Bo↗
DOE OSTI2022

Dispersion of modified fumed silica in elastomeric nanocomposites

In polymer nanocomposites, surface modification of silica aggregates can shield Coulombic interactions that inhibit agglomeration and formation of a network of agglomerates. Surface modification is usually achieved with silane coupling agents although carbon-coating during pyrolytic silica production is also possible. Pyrogenic silica with varying surface carbon contents were dispersed in styrene-butadiene (SBR) rubber to explore the impact on hierarchical dispersion, the emergence of meso-scale structures, and the rheological response. Pristine pyrogenic silica aggregates at concentrations above a critical value (related to the Debye screening length) display correlated meso-scale structures and poor filler network formation in rubber nanocomposites due to the presence of silanol groups on the surface. Here, in the present study, flame synthesized silica with sufficient surface carbon monolayers can mitigate the charge repulsion thereby impacting network structural emergence. The impact of the surface carbon on the van der Waals enthalpic attraction, a * , is determined. The van der Waals model for polymer nanocomposites is drawn through an analogy between thermal energy, k B T, and the accumulated strain, γ. The rheological response of the emergent meso-scale structures depends on the surface density of both carbon and silanol groups.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Spectral emission characteristics near 646 nm and plasma properties of laser-induced plasma of gaseous uranium hexafluoride

We present a detailed investigation of the temporal evolution of line and continuum emissions in laser-induced breakdown spectroscopy (LIBS) of gaseous uranium hexafluoride (UF 6 ), focusing on the spectral region near 646 nm. Spectral emission features, signal-to-background ratios (SBRs) of selected uranium lines, and spectral linewidths were examined under varying UF 6 pressures (15–60 Torr) and laser pulse energies (10–60 mJ). Higher pressures and pulse energies enhanced continuum emission and reduced SBRs but did not cause significant spectral congestion. Additional studies with the use of different laser systems, including nanosecond-pulsed Nd:YAG lasers (at fundamental and various harmonics) and a femtosecond-pulsed Ti:sapphire laser, revealed long-lived plasma continua in all cases. This persistent continuum is attributed to a pseudo-continuum from overlapping molecular emissions, as its intensity scales linearly with electron number density, deviating from the expected quadratic dependence of classical ion–electron interactions for free-free and free-bound continuum emission. Based on plasma persistence time, SBR, U II/U I intensity ratios, and electronic excitation temperature, no fundamental advantage was found for femtosecond-pulsed lasers over conventional nanosecond-pulsed ones for UF 6 enrichment assay with direct LIBS measurement.

Laser-induced breakdown spectroscopy↗
DOE OSTI2026

Using Novosphingobium aromaticivorans for Concurrent Production of Intracellular and Extracellular Products from Aromatics Extracted from Poplar Biomass

Achieving high biochemical production in biotransformations of renewable resources requires using concentrated cultures that not only generate the product of interest but also produce abundant microbial cell waste. We explored the concept of gaining value from microbial cells by producing intracellular products in tandem with a desired extracellular product. Specifically, we engineered a strain ofNovosphingobium aromaticivorans to extracellularly produce 2-pyrone-4,6-dicarboxylic acid (PDC) from aromatic substrates and to intracellularly accumulate astaxanthin along with coenzyme Q 10 , all of which are products of industrial interest. Achieving the goal of concurrent production of intracellular and extracellular products required the creative application of bioreactor engineering principles. Although a continuously fed membrane bioreactor (MBR) maximized extracellular product biosynthesis, it had a negative effect on intracellular product accumulation. However, operating the MBR as a sequencing batch reactor (MBR-SBR) with a step-feed resulted in stable concurrent production of both extracellular and intracellular products. With aromatics extracted from poplar biomass, we achieved productivities of 1.14 g of PDC/L-h for the extracellular product and 0.04 mg of astaxanthin/L-h and 0.64 mg of CoQ 10 /L-h for intracellular products, respectively. Our findings demonstrate that the mode of operation of a bioreactor impacts the simultaneous production of intracellular and extracellular products byN. aromaticivorans.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The compatibility performance of fuel system elastomers with two dioxolane molecules as blends with diesel

The compatibility of 17 elastomers with two dioxolane molecules was assessed by volume change and hardness measurements. Each molecule was blended with diesel in concentrations of 0, 10, 20 and 30 wt.%. The elastomers included two fluorocarbons, six acrylonitrile butadiene rubbers (NBRs), and one each of fluorosilicone, chloroprene rubber (CR), polyurethane, styrene butadiene rubber (SBR), hydrogenated NBR (HNBR), a blend of NBR and PVC (OZO), epichlorohydrin/ ethylene oxide (ECO), ethylene propylene diene monomer (EPDM), and silicone. Specimens of each elastomer were immersed in the test fuels for a period of 4 weeks and measured for property change. Afterwards they were dried at 60°C for 20 h and remeasured. The results showed that the dioxolanes were suitable with many of the elastomers and that the performances were essentially the same for both molecules. The dioxolanes were found to either have negligible impact beyond neat diesel or they produced a small increase in swell. This minimal impact is attributed to the fact that the solubility parameters (especially those associated with polarity and hydrogen bonding) of the dioxolanes are similar to those of diesel. As a result, little change in solubility and hence swell occurred when dioxolane was added to the diesel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

River and hyporheic zone water geochemical data from OsmoSamplers, East River Pumphouse, Colorado, Nov 2017-Sept 2018

This data package contains geochemical and river water temperature data from OsmoSamplers deployed at East River, Colorado pump house. There are three data files. The first one contains sulfate (SO4) and chloride (Cl) concentrations from riverwater and hyporheic zone (sediment water interface (SWI), 4 cm below seafloor (cmbsf), and 12 (cmbsf)). The second file contains methane concentrations, methane stable carbon isotope ratios and water isotopes from hyporheic zone porewaters. And the third is from a temperature logger during the deployment. Files are provided as .xls or .csv. This research was performed as part of the SBR funded project “Quantifying Subsurface Biogeochemical Variability in a High Altitude Watershed During Winter Isolation” DE-SC0018328. The novel part of this dataset is that we quantify these geochemical parameters throughout the winter isolation period, which is difficult to measure, as well as within the hyporheic zone. The data files were updated 3/1/2021 because the column label for the water isotopes was incorrect. Also, the csv files were also updated since they were not formatted correctly.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

East River Surface and Pore Water FTICR-MS Data Associated with “Implications of sample treatment on characterization of the riverine environmental metabolome”

Surface and pore water samples were collected from distributed locations around Meander A in East River (Crested Butte, CO, USA) during the summer of 2018. This dataset consists of the characterization of dissolved organic matter using 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS; in .xml format) analyzed through the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory) using two different sample pre-treatment methods (solid phase extraction, no solid phase extraction) and two electrospray ionization methods (ESI-positive, ESI-negative) to identify the impacts of these choices on the final dataset. This study aimed to understand how the different sample processing methods influence the resulting FTICR-MS dataset. Any published work that utilizes data presented in this dataset should cite the dataset using the DOI number. If using the dataset, please acknowledge the U.S. Department of Energy (DOE) Office of Science (BER) Subsurface Biogeochemical Research (SBR) program, the Environmental Molecular Sciences Laboratory (EMSL), and Worldwide Hydrobiogeochemical Observation Network for Dynamic River Systems (WHONDRS). The publication DOI will be added to this abstract when available.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

East River Pore Water FTICR-MS Data associated with "Geomorphic and Hydrogeochemical Controls on Fine-Scale Hyporheic Microbiome Assembly and Function"

Pore water samples were collected from distributed locations around Meander A in East River (Crested Butte, CO, USA) during the summer of 2018. This dataset consists of the characterization of dissolved organic matter using 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS; in .xml format) analyzed through the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory).This study aimed to understand organic matter assemblages differ within a streambed with differing geomorphology and the interplay between streambed organic matter and microbiome function. Any published work that utilizes data presented in this dataset should cite the dataset using the DOI number. If using the dataset, please acknowledge the U.S. Department of Energy (DOE) Office of Science (BER) Subsurface Biogeochemical Research (SBR) program, the Environmental Molecular Sciences Laboratory (EMSL), and Worldwide Hydrobiogeochemical Observation Network for Dynamic River Systems (WHONDRS). The publication DOI will be added to this abstract when available.

54 ENVIRONMENTAL SCIENCES↗