Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

SAGE 2-Umkehr case study of ozone differences and aerosol effects from October 1984 to April 1989

A comparison of 1262 cases of coincident ozone profiles derived from 666 Umkehrs at 17 different stations and 901 SAGE 2 profiles within 1000 km and 12 hours between October 1984 and April 1989 indicates the following layer percentage differences with 2-sigma error bars: layer three 14.6 plus/minus 3.3 percent, layer four 17.6 plus/minus 1.1 percent, layer five -1.3 plus/minus 0.5 percent, layer six -5.7 plus/minus 0.7 percent, layer seven -1.0 plus/minus 0.7 percent, layer eight 4.2 plus/minus 0.7 percent, and layer nine 6.8 plus/minus 1.2 percent. Comparing SAGE 2-Umkehr differences to SAGE 1 version 5.5-Umkehr differences shows SAGE 2 higher than or equal to SAGE 1 relative to Umkehr in all layers except layer three. Adjustment for this bias would produce trends derived from SAGE 2-SAGE 1 differences and Umkehr observations in the 1980s more nearly equal to each other in layers six, seven, and eight. A possible explanation of these differences is a systematic shift in the reference altitude between SAGE 1 and SAGE 2, but there is no independent evidence of this. While the shape of the vertical profile of differences at 17 individual Umkehr stations (mostly in mid-latitudes) is generally consistent at all stations except at Poker Flat, Seoul, and Lauder, significant variation does exists among the stations. The profile of mean difference is similar to previously observed differences between Umkehr and both SAGE 2 and SBUV and also to an eigenvector analysis, but with site-dependent amplitude discrepancies. Because of the close correspondence of stratospheric aerosol optical depth at the SAGE 2-measured 0.525 micron wavelength and the extrapolated 0.32 Umkehr wavelength determined in this study, we use the 0.525 micron data to determine the aerosol effect of Umkehr profiles. The aerosol errors to the Umkehr ozone amounts in percent ozone amount per 0.01 stratospheric aerosol optical depth range from plus 2 percent in layer six to minus 3 percent in layer nine. These results agree with previous theoretical and empirical studies within their respective error bounds in layers nine, eight, and five. The result in layer six differs significantly from previous works. In view of the fact that SAGE 2 and Umkehr produce different ozone retrievals in layers eight and nine and because the intra-layer correlation of SAGE 2 ozone and aerosol in layers eight and nine in non-zero, one must exercise some caution in attributing the entire SAGE 2-Umkehr differences in the upper layers to an aerosol effect.

Newchurch, M. J.↗

Comparison of SBUV and SAGE II ozone profiles: Implications for ozone trends

Solar backscattered ultraviolet (SBUV) ozone profiles have been compared with Stratospheric Aerosol and Gas Experiment (SAGE) II profiles over the period October 1984 through June 1990, when data are available from both instruments. SBUV measurements were selected to closely match the SAGE II latitude/longitude measurement pattern. There are significant differences between the SAGE II sunrise and the sunset zonal mean ozone profiles in the equatorial zone, particularly in the upper stratosphere, that may be connected with extreme SAGE II solar azimuth angles for tropical sunrise measurements. Calculation of the average sunset bias between SBUV and SAGE II ozone profiles shows that allowing for diurnal variation in Umkehr layer 10, SBUV and SAGE II agree to within +/- 5% for the entire stratosphere in the northern midlatitude zone. The worst agreement is seen at southern midlatitudes near the ozone peak (disagreements of +/- 10%), apparently the result of the SBUV ozone profile peaking at a lower altitude than SAGE. The integrated ozone columns (cumulative above 15 km) agree very well, to within +/- 2.3% in all zones for both sunset and sunrise measurements. A comparison of the time dependence of SBUV and SAGE II shows that there was less than +/- 5% relative drift over the 5.5 years for all altitudes except below 25 km, where the SBUV vertical resolution is poor. The best agreement with SAGE is seen in the integrated column ozone (cumulative above 15 km), where SAGE II has a 1% negative trend relative to SBUV over the comparison period. There is a persistent disagreement of the two instruments in Umkehr layers 9 and 10 of +/- 4% over the 5.5-year comparison period. In the equatorial zone this disagreement may be caused in part by a large positive trend (0.8 K per year) in the National Meteorologica Center temperatures used to convert the SAGE II measurement of ozone density versus altitude to a pressure scale for comparison with SBUV. In the middle stratosphere (30-40 km), SBUV shows a 2-4% negative drift relative to SAGE II. If the actual ozone trends are considered, SBUV and SAGE II agree in showing little ozone change (less than 2%) between 1984 and 1990, except in layer 3 where SAGE II measures a large ozone decrease. But over 11 years, SBUV measured a 7% per decade ozone decrease between 40 and 50 km, decreasing in magnitude at lower altitudes, in good agreement with 11-year trends derived from the average of 5 Umkehr stations.

Mcpeters, R. D.↗

GEOS Constituent Data Assimilation Beyond Aura MLS: Assimilating NASA SAGE III/ISS Profiles of Stratospheric Water Vapor and Ozone

Ozone and water vapor in the lower stratosphere are important trace gases for atmospheric chemistry and radiative budget. The Stratospheric Aerosol and Gas Experiment (SAGE) missions have been crucial in monitoring the stratospheric ozone loss and the subsequent recovery as well as the trends in water vapor linked to surface temperature trends. The SAGE III instrument aboard the International Space Station (ISS) continues the SAGE mission record, with high vertical resolution profiles of ozone and water vapor available since mid 2017. The NASA GEOS Earth system model has the new capability to assimilate multi-constituents from ground and space-based instruments using the GEOS Constituent Data Assimilation System (CoDAS). The recently released MERRA-2 Stratospheric Composition Reanalysis with Aura MLS (M2-SCREAM) assimilates version 4.2 MLS ozone, water vapor and other chemically-reactive species with the NASA GEOS model coupled to a stratospheric-only chemistry mechanism and transport constrained to the MERRA-2 reanalysis. While the number of solar occultation observations a day from SAGE III/ISS is about 1% of the total number of profiles observed globally by MLS, the chemical timescales of ozone and water vapor in the lower stratosphere are long enough that the SAGE III/ISS data may provide a useful constraint on the assimilated product. Using the same GEOS CoDAS configuration as M2-SCREAM, we will present a series of experiments to investigate if ozone and water vapor trends are consistent with the assimilation of SAGE observations with and without Aura retrievals, and to determine if the assimilation of SAGE observations produces a steady product for trend analysis, especially as the end of the Aura mission nears. In our experiments, assimilating only SAGE III/ISS water vapor profiles results in water vapor fields more consistent with experiments that assimilate MLS v5; however, in the polar regions SAGE III/ISS observations are not available and the values are unconstrained. We are encouraged by the positive benefit assimilating the less frequent SAGE III/ISS observations has on stratospheric composition. Sensitivity experiments such as these will allow us to assess the added value of SAGE data for continued monitoring of the stratospheric composition for climate and ozone recovery assessments.

SAGE↗

Evaluation of SAGE II and Balloon-Borne Stratospheric Aerosol Measurements

Under funding from this proposal we evaluated measurements of stratospheric sulfate aerosols from three platforms. Two were satellite platforms providing solar extinction measurements, the Stratospheric Aerosol and Gas Experiment (SAGE) II using wavelengths from 0.386 - 1.02 microns, and the Halogen Occultation Experiment (HALOE) using wavelengths from 2.45 to 5.26 microns. The third set of measurements was from in situ sampling by balloonborne optical particle counters (OPCs). The goal was to determine the consistency among these data sets. This was accomplished through analysis of the existing measurement records, and through additional balloonborne OPC flights coinciding with new SAGE II observations over Laramie, Wyoming. All analyses used the SAGE II v 6.0 data. This project supported two balloon flights per year over Laramie dedicated to SAGE II coincidence. Because logistical factors, such as poor surface weather or unfavorable payload impact location, can make it difficult to routinely obtain close coincidences with SAGE II, we attempt to conduct nearly every Laramie flight (roughly one per month) in conjunction with a SAGE II overpass. The Laramie flight frequency has varied over the years depending on field commitments and funding sources. Current support for the Laramie measurements is from the National Science Foundation in addition to support from this NASA grant. We have also completed a variety of comparisons using aerosol measurements from SAGE II, OPCs, and HALOE. The instruments were compared for their various estimates of aerosol extinction at the SAGE II wavelengths and for aerosol surface area. Additional results, such as illustrated here, can be found in a recently accepted manuscript describing comparisons between SAGE II, HALOE, and OPCs for the period 1982 - 2000. While overall, the impression from these results is encouraging, the agreement of the measurements changes with latitude, altitude, time, and parameter. In the broadest sense, these comparisons fall into two categories: high aerosol loading (volcanic periods) and low aerosol loading (background periods and altitudes above 25 km). When the aerosol amount is low SAGE II and HALOE extinctions are higher than the OPC estimates, while the SAGE II surface areas are lower than HALOE and the OPCS. Under high loading conditions, all three instruments mutually agree to within 50%.

Source record↗

The Use of Sage Water Vapor Data for Investigating Climate Change Issues

SAGE water vapor data has proven valuable for addressing several of the important issues in climate change research. It has been used to investigate how the upper troposphere water vapor responds to warming and convection, a key question in understanding the water vapor feedback to anthropogenic global warming. In the case of summer versus winter differences, SAGE results showed that the upper tropospheric relative humidity remained approximately constant; this result was in general agreement with how a GCM handled the seasonal difference, and gave credence to the argument that the GCM was not overestimating the water vapor feedback associated with convection. In addition, the convection-water vapor relationship was investigated further using SAGE water vapor and ISCCP cloud data. The results showed that upper tropospheric drying did appear to occur simultaneously with deep convective events in the tropics, only to be replaced by moistening a few hours later, associated (most likely) with the reevaporation of moisture from anvil clouds. The total effect was, again, a moistening of the upper troposphere associated with convection. Calculation of the actual trends in upper tropospheric moisture is a potential goal for SAGE data usage; trends calculated with radiosonde data, or instruments calibrated with radiosonde data have the problem of the effect of changing radiosonde instruments. SAGE data have in effect been used to compare different radiosondes through comparisons, and could continue to do so. SAGE 3 should also help clarify the absolute accuracy of SAGE retrievals in the troposphere. and its consequences. Model results show that water vapor increases can help explain the observations of stratospheric cooling, along with increasing C02 and ozone reduction. SAGE has been shown to provide trends similar to those of some other satellite and in situ retrievals, with increasing water vapor over time. However, SAGE is impacted by aerosol contamination which must be removed from the data; approaches used in the past will be reviewed. The SAGE water vapor errors, if taken literally, would make it hard to justify using SAGE data for such trends, and the error bars must be investigated. Stratospheric water vapor increases, like tropospheric increases, would lead to noticeable warming at the surface, and their changes must be quantified.

Rind, D.↗

SAGE III solar ozone measurements: Initial results

Results from two retrieval algorithms, o3-aer and o3-mlr , used for SAGE III solar occultation ozone measurements in the stratosphere and upper troposphere are compared. The main differences between these two retrieved (version 3.0) ozone are found at altitudes above 40 km and below 15 km. Compared to correlative measurements, the SAGE II type ozone retrievals (o3-aer) provide better precisions above 40 km and do not induce artificial hemispheric differences in upper stratospheric ozone. The multiple linear regression technique (o3_mlr), however, can yield slightly more accurate ozone (by a few percent) in the lower stratosphere and upper troposphere. By using SAGE III (version 3.0) ozone from both algorithms and in their preferred regions, the agreement between SAGE III and correlative measurements is shown to be approx.5% down to 17 km. Below 17 km SAGE III ozone values are systematically higher, by 10% at 13 km, and a small hemispheric difference (a few percent) appears. Compared to SAGE III and HALOE, SAGE II ozone has the best accuracy in the lowest few kilometers of the stratosphere. Estimated precision in SAGE III ozone is about 5% or better between 20 and 40 km and approx.10% at 50 km. The precision below 20 km is difficult to evaluate because of limited coincidences between SAGE III and sondes. SAGE III ozone values are systematically slightly larger (2-3%) than those from SAGE II but the profile shapes are remarkably similar for altitudes above 15 km. There is no evidence of any relative drift or time dependent differences between these two instruments for altitudes above 15-20 km.

Wang, Hsiang-Jui↗

Three-Wavelength Approach for Aerosol-Cloud Discrimination in the Sage III/ISS Aerosol Extinction Dataset

The tropical upper troposphere and lower stratosphere (UTLS) region is dominated by aerosols and clouds affecting Earth’s radiation budget and climate. Thus, satellites’ continuous monitoring and identification of these layers is crucial for quantifying their radiative impact. However, distinguishing between aerosols and clouds is challenging, especially under the perturbed UTLS conditions during post-volcanic eruptions and wildfire events. Aerosol-cloud discrimination is primarily based on their disparate wavelength-dependent scattering and absorption properties. In this study, we use aerosol extinction observations in the tropical (15°N-15°S) UTLS from June 2017 to February 2021, available from the latest generation of the Stratospheric Aerosol and Gas Experiment (SAGE) instrument-SAGE III onboard the International Space Station (ISS) to study aerosols and clouds. During this period, the SAGE III/ISS provided better coverage over the tropics at additional wavelength channels (relative to previous SAGE missions) and witnessed several volcanic and wildfire events that perturbed the tropical UTLS. We explore the advantage of having an extinction coefficient at an additional wavelength channel (1550 nm) from the SAGE III/ISS in aerosol-cloud discrimination using a method based on thresholds of two extinction coefficient ratios, R1R1 (520 nm/1020 nm) and R2R2 (1020 nm/1550 nm). This method was proposed earlier by Kent et al. [Appl. Opt. 36, 8639 (1997) [CrossRef] ] for the SAGE III-Meteor-3M but was never tested for the tropical region under volcanically perturbed conditions. We call this method the Extinction Color Ratio (ECR) method. The ECR method is applied to the SAGE III/ISS aerosol extinction data to obtain cloud-filtered aerosol extinction coefficients, cloud-top altitude, and seasonal cloud occurrence frequency during the entire study period. Cloud-filtered aerosol extinction coefficient obtained using the ECR method revealed the presence of enhanced aerosols in the UTLS following volcanic eruptions and wildfire events consistent with the Ozone Mapping and Profiler Suite (OMPS) and space-borne lidar-Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). The cloud-top altitude obtained from the SAGE III/ISS is within 1 km of the nearly co-located observations from OMPS and CALIOP. In general, the seasonal mean cloud-top altitude from the SAGE III/ISS events peaks during the December, January, and February months, with sunset events showing higher cloud tops than the sunrise events, indicating the seasonal and diurnal variation of the tropical convection. The seasonal altitude distribution of cloud occurrence frequency obtained from the SAGE III/ISS also agrees well with CALIOP observations within 10%. We show that the ECR method is a simple approach that relies on thresholds independent of the sampling period, providing cloud-filtered aerosol extinction coefficients uniformly for climate studies irrespective of the UTLS conditions. However, since the predecessor of SAGE III did not include a 1550 nm channel, the usefulness of this approach is limited to short-term climate studies after 2017.

Clouds Aerosols↗

GEOS Constituent Data Assimilation Beyond Aura MLS: Assimilating NASA SAGE III/ISS Profiles of Stratospheric Water Vapor

Ozone and water vapor in the lower stratosphere are important trace gases for atmospheric chemistry and radiative budget. The Stratospheric Aerosol and Gas Experiment (SAGE) missions have been crucial in monitoring the stratospheric ozone loss and the subsequent recovery as well as the trends in water vapor linked to surface temperature trends. The SAGE III instrument aboard the International Space Station (ISS) continues the SAGE mission record, with high vertical resolution profiles of ozone and water vapor available since mid 2017. The NASA GEOS Earth system model has the new capability to assimilate multi-constituents from ground and space-based instruments using the GEOS Constituent Data Assimilation System (CoDAS). The recently released MERRA-2 Stratospheric Composition Reanalysis with Aura MLS (M2-SCREAM) assimilates version 4.2 MLS ozone, water vapor and other chemically-reactive species with the NASA GEOS model coupled to a stratospheric-only chemistry mechanism and transport constrained to the MERRA-2 reanalysis. While the number of solar occultation observations a day from SAGE III/ISS is about 1% of the total number of profiles observed globally by MLS, the chemical timescales of ozone and water vapor in the lower stratosphere are long enough that the SAGE III/ISS data may provide a useful constraint on the assimilated product. Using the same GEOS CoDAS configuration as M2-SCREAM, we will present a series of experiments to investigate if water vapor trends are consistent with the assimilation of SAGE observations with and without Aura retrievals, and to determine if the assimilation of SAGE observations produces a steady product for trend analysis, especially as the end of the Aura mission nears. In our experiments, assimilating only SAGE III/ISS water vapor profiles results in water vapor fields more consistent with experiments that assimilate MLS v5; however, in the polar regions SAGE III/ISS observations are not available and the modelled values are unconstrained. We are encouraged by the positive benefit assimilating the less frequent SAGE III/ISS observations has on stratospheric composition. Sensitivity experiments such as these will allow us to assess the added value of SAGE data for continued monitoring of the stratospheric composition for climate and ozone recovery assessments.

K Emma Knowland↗

Challenges of Operations in a Dynamic Environment: A Three-Year Perspective of SAGE III

The Stratospheric Aerosol and Gas Experiment~III on the International Space Station (SAGE III/ISS) was delivered to the International Space Station (ISS) on 23 February 2017. The SAGE III/ISS payload was robotically installed external to the ISS and began acquiring science measurements on 17 March 2017. The SAGE III/ISS instrument retrieves vertical profiles of atmospheric ozone, multi-wavelength aerosol extinctions, and other gaseous species. This paper will focus on the improvements made to the operations of the SAGE III/ISS payload. A key focus of the operations team following commissioning was to create robust tools that aide in the operations of the payload. A close collaboration with the SAGE III/ISS ground systems team allowed for the development of web-based tools to continuously monitor the health of the instrument. The mission operations team also worked with the SAGE III/ISS science team to gain a better sense of how the instrument works to maximize the quality and quantity of the science data collected. Another unique aspect of the SAGE III/ISS payload, that will be discussed, is the challenges of operating a hosted payload on the ISS; an active platform that has frequent attitude maneuvers, dockings, and EVA's. This active environment increases the need for the SAGE III/ISS operations team command the payload. Through coordination and teamwork, SAGE III/ISS mission has developed an operations team that has successfully managed the instrument around ISS activities and recovered from multiple instrument upsets. This has led the SAGE III/ISS payload to successfully surpass the acquisition metrics set forth prior to launch, allowing for the continued contribution to studying the atmospheric composition of the stratosphere and how it plays a role in earth’s climate.

SAGE III↗

Operations Challenges in a Dynamic Environment: A Three-Year Perspective of SAGE III

The Stratospheric Aerosol and Gas Experiment III on the International Space Station (SAGE III/ISS) was delivered to the International Space Station (ISS) on 23 February 2017. The SAGE III/ISS payload was robotically installed external to the ISS and began acquiring science measurements on 17 March 2017. The SAGE III/ISS instrument retrieves vertical profiles of atmospheric ozone, multi-wavelength aerosol extinctions, and other gaseous species. This paper will focus on the improvements made to the operations of the SAGE III/ISS payload. A key focus of the operations team following commissioning was to create robust tools that aid in the operations of the payload. A close collaboration with the SAGE III/ISS ground systems team allowed for the development of web-based tools to continuously monitor the health of the payload. The mission operations team also worked with the SAGE III/ISS science team to gain a better sense of how the instrument works to maximize the quality and quantity of the science data collected. Another unique aspect of the SAGE III/ISS payload, that will be discussed, is the challenges of operating a hosted payload on the ISS; an active platform that has frequent attitude maneuvers, dockings, and EVAs. This active environment increases the need for the SAGE III/ISS operations team command to the payload. Through coordination and teamwork, SAGE III/ISS mission has developed an operations team, tool, and procedures that have successfully managed the payload around ISS activities and recovered from multiple instrument upsets. This has led the SAGE III/ISS payload to successfully surpass the acquisition metrics set forth prior to launch, allowing for the continued contribution to studying the atmospheric composition of the stratosphere and how it plays a role in Earth’s climate.

SAGE III↗

The Stratospheric Aerosol and Gas Experiment (SAGE III) on the International Space Station (ISS) Mission

The Stratospheric Aerosol and Gas Experiment III on the International Space Station (SAGE III/ISS) mission will provide the science community with high-vertical resolution and nearly global observations of ozone, aerosols, water vapor, nitrogen dioxide, and other trace gas species in the stratosphere and upper-troposphere. SAGE III/ISS measurements will extend the long-term Stratospheric Aerosol Measurement (SAM) and SAGE data record begun in the 1970s. The multi-decadal SAGE ozone and aerosol data sets have undergone intense scrutiny and are considered the international standard for accuracy and stability. SAGE data have been used to monitor the effectiveness of the Montreal Protocol. Key objectives of the mission are to assess the state of the recovery in the distribution of ozone, to re-establish the aerosol measurements needed by both climate and ozone models, and to gain further insight into key processes contributing to ozone and aerosol variability. The space station mid-inclination orbit allows for a large range in latitude sampling and nearly continuous communications with payloads. The SAGE III instrument is the fifth in a series of instruments developed for monitoring atmospheric constituents with high vertical resolution. The SAGE III instrument is a moderate resolution spectrometer covering wavelengths from 290 nm to 1550 nm. Science data is collected in solar occultation mode, lunar occultation mode, and limb scatter measurement mode. A SpaceX Falcon 9 launch vehicle will provide access to space. Mounted in the unpressurized section of the Dragon trunk, SAGE III will be robotically removed from the Dragon and installed on the space station. SAGE III/ISS will be mounted to the ExPRESS Logistics Carrier-4 (ELC-4) location on the starboard side of the station. To facilitate a nadir view from this location, a Nadir Viewing Platform (NVP) payload was developed which mounts between the carrier and the SAGE III Instrument Payload (IP).

Cisewski, Michael↗

Developing A Continuous Ozone Record Through the SAGE and Aura Missions With NASA Reanalysis Products

During the last quarter of the 20th century, the Stratospheric Aerosol and Gas Experiment (SAGE) missions were crucial in monitoring the loss and the subsequent recovery of the stratospheric ozone layer. Due to the employed solar occultation and self-calibration method, the SAGE monitors have produced stable data throughout the lifetime of each instrument. However, over ten years passed between the end of the SAGE II and SAGE III/M3M missions in 2005 and the launch of SAGE III/ISS instrument in 2017, leaving a gap in the data that much be bridged in order to assess the trends in the ozone record. Reanalysis products, such as the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2), are attractive candidates for trend analysis due to the statistically optimized combination of multiple observing systems and the regular temporal and spatial coverage. In this study, we explore using the SAGE records to develop a stable reanalysis data product, suitable for trend analysis, from the start of the SAGE II record in 1984 through the present. Changes in the assimilated observation systems can introduce discontinuities within the MERRA-2 ozone record, such as in 2004 when the MERRA-2 system shifted from assimilating ozone retrievals collected by SBUV instruments to those collected by instruments onboard the Aura satellite. We follow the radiative transfer procedure outlined by Wargan et al. (2018) to address discontinuities in the MERRA-2 ozone dataset at the 2004 transition and during the Aura record. SAGE II ozone profiles are used to address discontinuities in upper stratospheric ozone associated with changes in the MERRA-2 meteorological observing system in 1998 and 1995. Lastly, we will use the resulting bias-corrected MERRA-2 ozone fields to assess the relative performance of the data from different SAGE sensors.

SAGE↗

SAGE (version 5.96) Ozone Trends in the Lower Stratosphere

Ozone retrievals from Stratospheric Aerosol and Gas Experiment (SAGE) II version 5.96 (v5.96) below approx. 25 km altitude are discussed. This version of the algorithm includes improved constraints on the wavelength dependence of aerosol extinctions based on the ensemble of aerosol size distribution measurements. This results in a reduction of SAGE ozone errors in the 2 years after the Mount Pinatubo eruption. However, SAGE ozone concentrations are still approx. 10% larger than ozonesonde and Halogen Occultation Experiment (HALOE) measurements below 20 km altitude under nonvolcanic conditions (and by more than this in the tropics). The analysis by Steele and Turco suggests that the SAGE ozone overpredictions are in the wrong direction to be explained by aerosol extinction extrapolation errors. Moreover, preliminary SAGE 11 v6.0a retrievals suggest that they are partially accounted for by geometric difficulties at low altitudes in v5.96 and prior retrievals. SAGE ozone trends for the 1979-1996 and 1984-1996 periods are calculated and compared, and the sources of trend errors are discussed. These calculations are made after filtering out ozone data during periods of high, local aerosol extinctions. In the lower stratosphere, below approx. 28 km altitude, there is shown to be excellent agreement in the altitudinal structure of ozone decreases at 45 deg N between SAGE and ozonesondes with the largest decrease in both between 1979 and 1996 having occurred below 20 km altitude, amounting to 0.9 +/- 0.7% yr (2sigma) at 16 km altitude. However, in contrast to the fairly steady decreases at 45 deg N, both SAGE measurements and Lauder ozonesondes show ozone increases at 45 deg S over the period from the mid-1980s to 1996 of 0.2 +/- 0.5%/yr (2sigma) from 15 to 20 km altitude. The SAGE data suggest that this increase is a wintertime phenomenon which occurs in the 15-20 km height range. Changes in dynamics are suggested as the most likely cause of this increase. These hemispheric differences in ozone trends are supported by ozone column measurements by the Total Ozone Mapping Spectrometer (TOMS).

Cunnold, D. M.↗

Earth Science With the Stratospheric Aerosol and Gas Experiment III (SAGE III) on the International Space Station

The Stratospheric Aerosol and Gas Experiment (SAGE) III is the fourth generation of solar occultation instruments operated by NASA, the first coming under a different acronym, to investigate the Earth's upper atmosphere. Three flight-ready SAGE III instruments were built by Ball Aerospace in the late 1990s, with one launched aboard the former Russian Aviation and Space Agency (now known as Roskosmos) Meteor-3M platform on 10 December 2001 (continuing until the platform lost power in 2006). Another of the original instruments was manifested for the ISS in the 2004 time frame, but was delayed because of budgetary considerations. Fortunately, that SAGE III/ISS mission was restarted in 2009 with a major focus upon filling an anticipated gap in ozone and aerosol observation in the second half of this decade. Here we discuss the mission architecture, its implementation, and data that will be produced by SAGE III/ISS, including their expected accuracy and coverage. The 52-degree inclined orbit of the ISS is well-suited for solar occultation and provides near-global observations on a monthly basis with excellent coverage of low and mid-latitudes. This is similar to that of the SAGE II mission (1985-2005), whose data set has served the international atmospheric science community as a standard for stratospheric ozone and aerosol measurements. The nominal science products include vertical profiles of trace gases, such as ozone, nitrogen dioxide and water vapor, along with multi-wavelength aerosol extinction. Though in the visible portion of the spectrum the brightness of the Sun is one million times that of the full Moon, the SAGE III instrument is designed to cover this large dynamic range and also perform lunar occultations on a routine basis to augment the solar products. The standard lunar products were demonstrated during the SAGE III/M3M mission and include ozone, nitrogen dioxide & nitrogen trioxide. The operational flexibility of the SAGE III spectrometer accomplishes the main goal of producing ozone and aerosol extinction profiles, while allowing exploration of new possibilities for the occultation technique, such as night-time aerosol extinction profiles or other trace gases not measured by SAGE in the past.

Zawodny, Joe↗