SEARCH · Engineering Papers

Results for “Rigid-body dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1987

The effects of aeroelastic deformation on the unaugmented stopped-rotor dynamics of an X-Wing aircraft

A new design concept in the development of vertical takeoff and landing aircraft with high forward flight speed capability is that of the X-Wing. The X-Wing is a stiff, bearingless helicopter rotor system which can be stopped in flight and the blades used as two forward-swept wings and two aft-swept wings. Because of the unusual configuration in the fixed-wing mode, there is a high potential for aeroelastic divergence or flutter and coupling of blade vibration modes with rigid-body modes. An aeroelastic stability analysis of an X-Wing configuration aircraft was undertaken to determine if these problems could exist. This paper reports on the results of dynamic stability analyses in the lateral and longitudinal directions including the vehicle rigid-body and flexible modes. A static aeroelastic analysis using the normal vibration mode equations of motion was performed to determine the cause of a loss of longitudinal static margin with increasing airspeed. This loss of static margin was found to be due to aeroelastic 'washin' of the forward-swept blades and 'washout' of the aft-swept blades moving the aircraft aerodynamic center forward of the center of gravity. This phenomenon is likely to be generic to X-Wing aircraft.

Gilbert, Michael G.↗

NASA NTRS1987

The role of three-dimensional shapes in the break-up of charged drops

The nonlinear dynamics of nonaxisymmetric inviscid charged conducting drops near the Rayleigh charge limit (R = 4) is investigated analytically. It is shown that only axisymmetric spheroid drops bifurcate from the sphere family when the charge is increased, that oblate spheroids at R greater than 4 are unstable to nonaxisymmetric disturbances governing drop breakup, and that prolate spheroids at R less than 4 are unstable only to axisymmetric disturbances tending to increase the length of the drop along its symmetry axis. The effects of external electric fields and rigid-body rotation are also analyzed, and the solutions for the amplitude equations at R just less than 4 (equivalent to the dynamical equations of the Henon-Heiles Hamiltonian) are explored.

Natarajan, R.↗

NASA NTRS1985

A robust nonlinear attitude control law for space stations with flexible structural components

In this paper, a nonlinear attitude control law for space stations with flexible structural components is derived using a rigid-body model. This control law, depending on the Cayley-Rodriguez parameters, globally stabilizes the equilibrium of the rigid-body model. The effect of elastic deformations of the flexible structural components on the resulting feedback system dynamics is analyzed. It is found that the system's stability property is highly robust with respect to structural vibrations and inertial variations. The time-domain behavior of the feedback system is studied numerically using a model of a typical space station with flexible solar panels.

Wang, P. K. C.↗

NASA NTRS1983

A modal analysis of flexible aircraft dynamics with handling qualities implications

A multivariable modal analysis technique is presented for evaluating flexible aircraft dynamics, focusing on meaningful vehicle responses to pilot inputs and atmospheric turbulence. Although modal analysis is the tool, vehicle time response is emphasized, and the analysis is performed on the linear, time-domain vehicle model. In evaluating previously obtained experimental pitch tracking data for a family of vehicle dynamic models, it is shown that flexible aeroelastic effects can significantly affect pitch attitude handling qualities. Consideration of the eigenvalues alone, of both rigid-body and aeroelastic modes, does not explain the simulation results. Modal analysis revealed, however, that although the lowest aeroelastic mode frequency was still three times greater than the short-period frequency, the rigid-body attitude response was dominated by this aeroelastic mode. This dominance was defined in terms of the relative magnitudes of the modal residues in selected vehicle responses.

Schmidt, D. K.↗

NASA NTRS1987

Control of Spacecraft Control Laboratory Experiment (SCOLE) slew maneuvers

This is the second report of a set of two reports on the dynamics and control of slewing maneuvers of NASA Spacecraft Control Laboratory Experiment (SCOLE). The control problem of slewing maneuvers of SCOLE is developed in terms of an arbitrary maneuver about any given axis. The control system is developed for the combined problem of rigid-body slew maneuver and vibration suppression of flexible appendage. The control problem is formulated by incorporating the nonlinear equations derived in the previous report and is expressed in terms of a two-point boundary value problem utilizing a quadratic type of performance index. The two-point boundary value problem is solved as a hierarchical control problem with the overall system being split in terms of two subsystems, namely the slewing of the entire assembly and the vibration suppression of the flexible antenna. The coupling variables between the two dynamical subsystems are identified and these two subsystems for control purposes are treated independently in parallel at the first level. Then the state-space trajectory of the combined problem is optimized at the second level.

Kakad, Y. P.↗

NASA NTRS1987

Maneuvering and vibration control of flexible spacecraft

This paper is concerned with the problem of slewing a large structure in space and suppressing any vibration at the same time. The structure is assumed to undergo large rigid-body motions and small elastic deformations. A perturbation method permits a maneuver strategy independent of the vibration control. Optimal control and pole placement techniques, formulated to include first-order actuator dynamics, are used to suppress the vibration during maneuver. The theory is illustrated by simultaneous maneuvering and vibration control of the Spacecraft Control Laboratory Experiment (SCOLE) model in a space environment.

Meirovitch, L.↗

NASA NTRS1982

The Development of a Handbook for Astrobee F Performance and Stability Analysis

An astrobee F performance and stability analysis is presented, for use by the NASA Sounding Rocket Division. The performance analysis provides information regarding altitude, mach number, dynamic pressure, and velocity as functions of time since launch. It is found that payload weight has the greatest effect on performance, and performance prediction accuracy was calculated to remain within 1%. In addition, to assure sufficient flight stability, a predicted rigid-body static margin of at least 8% of the total vehicle length is required. Finally, fin cant angle predictions are given in order to achieve a 2.5 cycle per second burnout roll rate, based on obtaining 75% of the steady roll rate. It is noted that this method can be used by flight performance engineers to create a similar handbook for any sounding rocket series.

Wolf, R. S.↗

NASA NTRS1986

Dynamics and Control of Flexible Spacecraft During and After Slewing Maneuvers

The dynamics and control of slewing maneuvers of a large flexible spacecraft, namely, NASA Spacecraft Control Laboratory Experiment (SCOLE) test article are studied. The dynamical equations obtained for slewing maneuvers are highly nonlinear and coupled. The maneuver is expressed in terms of four Euler parameters and is specified as the angular displacement about an arbitrary axis. The slew maneuver control problem is developed in terms of rigid-body slewing and suppression of two elastic modes is analyzed using the method of nonlinear decoupling.

Kakad, Y. P.↗

NASA NTRS1973

Aeroelastic analysis of sounding rocket vehicles.

Rigid-body stability analysis can be extended to treat aeroelastic effects by allowing the structure to deflect under airloads as a simple beam. Linear aerodynamics and the bent shape then define the airloads. The resulting equations are indeterminant but can be manipulated to show the basic aeroelastic effects of flexibility, dynamic pressure, and angle of attack. The FLMD quasi-static program can solve these equations by iteration and compute stability for a specific vehicle/payload combination. Given the proper distributed inputs for the instant of time investigated, the FLMD predicts the center of pressure and related parameters, such as static margin.

Meyers, S. C.↗

NASA NTRS1982

Semi-implicit transient analysis procedures for structural dynamics analysis

A semi-implicit direct time integration procedure is presented which avoids factorization of the implicit difference solution matrix. The procedure, if properly implemented, requires only vectorial calculations and hence needs the same computer core space as explicit integration procedures. Guidelines for splitting the stiffness matrix into upper and lower matrices are established, which among other things are designed to satisfy a correct transmission of rigid-body motions from element (or grid) to its adjacent elements.

Park, K. C.↗

NASA NTRS1981

Dynamic Moire Methods for Detection of Loosened Space Shuttle Tiles

Moire fringe methods for detecting loose space shuttle tiles were investigated with a test panel consisting of a loose tile surrounded by four securely bonded tiles. The test panel was excited from 20 to 150 Hz with in-plane sinusoidal acceleration of 2 g (peak). If the shuttle orbiter can be subjected to periodic excitation of 1 to 2 g (peak) and rigid-body periodic displacements do not mask the change in the Moire pattern due to tile looseness, then the use of projected Moire fringes to detect out-of-plane rockin appears to be the most viable indicator of tile looseness since no modifications to the tiles are required.

Snow, W. L.↗

NASA NTRS1984

Decoupled control analysis of a large flexible space antenna with linear quadratic regulator comparisons

A decoupled-control analysis was performed for a large flexible space antenna. Control involved commanding changes in the rigid-body modes or nulling disturbances in the flexible modes. The study provides parametric-type data which could be useful in the final design of a large space antenna control system. Results are presented to illustrate the effect on control requirements of (1) the number of modes controlled; (2) the number, type, and location of control actuators; and (3) variations in the closed-loop dynamics of the control system. Comparisons are given between the decoupled-control results and those obtained by using a linear quadratic regulator approach. Time history responses are presented to illustrate the effects of the control procedures.

Young, J. W.↗

NASA NTRS1986

Solving large-scale dynamic systems using band Lanczos method in Rockwell NASTRAN on CRAY X-MP

The improved cost effectiveness using better models, more accurate and faster algorithms and large scale computing offers more representative dynamic analyses. The band Lanczos eigen-solution method was implemented in Rockwell's version of 1984 COSMIC-released NASTRAN finite element structural analysis computer program to effectively solve for structural vibration modes including those of large complex systems exceeding 10,000 degrees of freedom. The Lanczos vectors were re-orthogonalized locally using the Lanczos Method and globally using the modified Gram-Schmidt method for sweeping rigid-body modes and previously generated modes and Lanczos vectors. The truncated band matrix was solved for vibration frequencies and mode shapes using Givens rotations. Numerical examples are included to demonstrate the cost effectiveness and accuracy of the method as implemented in ROCKWELL NASTRAN. The CRAY version is based on RPK's COSMIC/NASTRAN. The band Lanczos method was more reliable and accurate and converged faster than the single vector Lanczos Method. The band Lanczos method was comparable to the subspace iteration method which was a block version of the inverse power method. However, the subspace matrix tended to be fully populated in the case of subspace iteration and not as sparse as a band matrix.

Gupta, V. K.↗

NASA NTRS1976

Free-interface methods of substructure coupling for dynamic analysis

Benfield, et al. (1972) showed that among fixed-interface, free-interface, and hybrid substructure coupling methods, the fixed-interface methods as the most accurate and the free-interface methods are the least accurate. In the present note, a substructure coupling method is proposed which employs free-interface substructure modes supplemented by 'reduced flexibility.' Substructure coupling based on the improved substructure model is discussed, and a numerical comparison with Hou's free-interface method is given. To simplify representation of the method proposed, the substructure equations are developed first for constrained substructures, and then the equations representing substructures with rigid-body modes are given. Finally, the equations for coupling of substructures are derived. Example calculations are included.

Craig, R. R., Jr.↗

NASA NTRS1977

Solar sail attitude dynamics and control

This paper describes some results of an attitude dynamics and control study for a solar sailing vehicle. This type of vehicle is currently under study and evaluation at JPL and has very high potential for interplanetary missions in and beyond the 1980s. Crucial to the success of such a vehicle would be the performance of its onboard attitude control system. Because of the vehicle's large size and its flexibility, vehicle deformations may have a potential for causing a degradation in vehicle performance. It may therefore be necessary for the control system to take into account the vehicle deformations as well as its rigid-body motions. Distributed parameter system analysis techniques are used in the paper to study certain fundamental aspects of such a control system for the sail vehicle. The techniques can, however, be more generally applicable to other large flexible vehicles.

Rodriguez, G.↗

NASA NTRS1975

A generalized tensor formulation of atmosphere and seas dynamics

A generalized mathematical model was developed for simulation of the dynamics and transport of both the atmosphere and seas. A nearly horizontal bottom coordinate surface conforms to the land-to-air interface and the sea-floor-to-water interface, which simplifies computations. General vertical motion of the other quasi-horizontal coordinate surfaces is allowed; external gravity waves can be represented by the top coordinate surface, and meteorological fronts and inversion layers in the atmosphere and refractive layers in the seas can be represented with enhanced resolution by the internal quasi-horizontal coordinate surfaces. A tensor reformulation of the standard subgrid mixing theory departs significantly from the standard theory in allowing, as a solution under adiabatic conditions, rigid-body rotation of the atmosphere.

Avis, L. M.↗

NASA NTRS1972

Dynamic characteristics of a two-stage variable-mass flexible missile with internal flow

A general formulation of the dynamical problems associated with powered flight of a two stage flexible, variable-mass missile with internal flow, discrete masses, and aerodynamic forces is presented. The formulation comprises six ordinary differential equations for the rigid body motion, 3n ordinary differential equations for the n discrete masses and three partial differential equations with the appropriate boundary conditions for the elastic motion. This set of equations is modified to represent a single stage flexible, variable-mass missile with internal flow and aerodynamic forces. The rigid-body motion consists then of three translations and three rotations, whereas the elastic motion is defined by one longitudinal and two flexural displacements, the latter about two orthogonal transverse axes. The differential equations are nonlinear and, in addition, they possess time-dependent coefficients due to the mass variation.

Meirovitch, L.↗

NASA NTRS1977

Validation of a Flexible Aircraft TakeOff and Landing Analysis /FATOLA/ computer program using flight landing data

A multiple-degree-of-freedom takeoff and landing analysis, Flexible Aircraft TakeOff and Landing Analysis computer program (FATOLA), was used to predict the landing behavior of a rigid-body X-24B reentry research vehicle and of a flexible-body modified-delta-wing supersonic YF-12 research aircraft. The analytical predictions were compared with flight test data for both research vehicles. Predicted time histories of vehicle motion and attitude, landing-gear strut stroke, and axial force transmitted from the landing gear to the airframe during the landing impact and rollout compared well with the actual time histories. Based on the comparisons presented, the versatility and validity of the FATOLA program for predicting landing dynamics of aircraft has been demonstrated.

Carden, H. D.↗