Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Relative accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

On the application of multifrequency polarimetric radar observations for sea-ice classification

The use of multifrequency polarimetric radar imagery to enhance the ability to separate different sea-ice types using single-frequency, single-polarization synthetic aperture radar (SAR) data is investigated. Backscatter characteristics of six radiometrically and polarimetrically distinct sea-ice types are selected in an unsupervised range-dependent analysis of multifrequency polarimetric SAR data using the maximum a posteriori (MAP) polarimetric classifier. Maximum ice discrimination is achieved with combined C- and L-band full polarimetry, and collocated passive microwave imagery suggests greater than 90 percent classification accuracy. C-band VV-pol alone achieves only 68 percent relative accuracy because it confuses multiyear and rough compressed first year ice. L-band, relative classification accuracy is 75 percent, 83 percent, and 85 percent, using HH-pol, HH- and VV-combined, or the full polarimetry, respectively. P-band is less accurate. Combinations of two frequencies at a single polarization show the greatest improvement over a single channel.

Rignot, Eric↗
NASA NTRS2002

Prelaunch Instrument Calibration in the Real World: The GOES Example

The pre-launch ground infrared calibration of the Geostationary Operational Environmental Satellite (GOES) N-Q Imager and Sounder is presented. Ground calibration provides information necessary to the accurate on-orbit calibration of these radiometers. Infrared channels are calibrated in a thermal vacuum environment, under minimum and maximum mission operation temperatures, using a variable-temperature warm target to simulate the Earth scene and a cold target to simulate the space scene. Brightness temperatures derived from observation of the instrument internal calibration target, used for on-orbit calibration, are compared to brightness temperatures of the external calibration target as a check of relative accuracy using these two sources. Changes to the GOES N-Q specification from GOES I-M are highlighted, as well as results of noise, relative calibration accuracy, and spectral response performance to date. For completeness, results of spatial and pointing performance will be presented. Enhancements to test methodology and data processing techniques are highlighted throughout.

Murphy-Morris, J.↗
NASA NTRS1991

An introduction to the global positioning system and some geological applications

The fundamental principles of the global positioning system (GPS) are reviewed, with consideration given to geological and geophysical applications and related accuracy requirements. Recent improvements are emphasized which relate to areas such as equipment cost, limitations in the GPS satellite constellation, data analysis, uncertainties in satellite orbits and propagation delays, and problems in resolving carrier phase cycle ambiguities. Earthquake processes and near-fault crustal deformation monitoring have been facilitated by advances in GPS data acquisition and analysis. Horizontal positioning capability has been improved by new satellite constellation, better models, and global tracking networks. New classes of tectonic problems may now be studied through GPS, such as kinematic descriptions of crustal deformation and the measurement of relative plate motion at convergent boundaries. Continued improvements in the GPS are foreseen.

Dixon, T. H.↗
NASA NTRS1993

Laer-induced Breakdown Spectroscopy Instrument for Element Analysis of Planetary Surfaces

One of the most fundamental pieces of information about any planetary body is the elemental and mineralogical composition of its surface materials. We are developing an instrument to obtain such data at ranges of up to several hundreds of meters using the technique of Laser-Induced Breakdown Spectroscopy (LIBS). We envision our instrument being used from a spacecraft in close rendezvous with small bodies such as comets and asteroids, or deployed on surface-rover vehicles on large bodies such as Mars and the Moon. The elemental analysis is based on atomic emission spectroscopy of a laser-induced plasma or spark. A pulsed, diode pumped Nd:YAG laser of several hundred millijoules optical energy is used to vaporize and electronically excite the constituent elements of a rock surface remotely located from the laser. Light emitted from the excited plasma is collected and introduced to the entrance slit of a small grating spectrometer. The spectrally dispersed spark light is detected with either a linear photo diode array or area CCD array. When the latter detector is used, the optical and spectrometer components of the LIBS instrument can also be used in a passive imaging mode to collect and integrate reflected sunlight from the same rock surface. Absorption spectral analysis of this reflected light gives mineralogical information that provides a remote geochemical characterization of the rock surface. We performed laboratory calibrations in air and in vacuum on standard rock powders to quantify the LIBS analysis. We performed preliminary field tests using commercially available components to demonstrate remote LIBS analysis of terrestrial rock surfaces at ranges of over 25 m, and we have demonstrated compatibility with a six-wheeled Russian robotic rover vehicle. Based on these results, we believe that all major and most minor elements expected on planetary surfaces can be measured with absolute accuracy of 10-15 percent and much higher relative accuracy. We have performed preliminary systems analysis of a LIBS instrument to evaluate probable mass and power requirements; results of this analysis are summarized.

Blacic, J.↗
NASA NTRS2007

Validation of Ozone Profiles Retrieved from SAGE III Limb Scatter Measurements

Ozone profiles retrieved from Stratospheric Aerosol and Gas Experiment (SAGE III) limb scatter measurements are compared with correlative measurements made by occultation instruments (SAGE II, SAGE III and HALOE [Halogen Occultation Experiment]), a limb scatter instrument (Optical Spectrograph and InfraRed Imager System [OSIRIS]) and a series of ozonesondes and lidars, in order to ascertain the accuracy and precision of the SAGE III instrument in limb scatter mode. The measurement relative accuracy is found to be 5-10% from the tropopause to about 45km whereas the relative precision is found to be less than 10% from 20 to 38km. The main source of error is height registration uncertainty, which is found to be Gaussian with a standard deviation of about 350m.

Rault, Didier F.↗
NASA NTRS1990

Estimation and filtering for high-precision GPS positioning applications

Estimation of GPS satellite orbits and other parameters for high-accuracy geodetic and tracking applications is carried out with a multi-satellite batch sequential pseudo-epoch state process noise filter. Both square-root information filtering and UD factorized covariance filtering and smoothing formulations are implemented in the software to enhance numerical stability. The filtering algorithms have been arranged to take advantage of sparse matrices and other characteristics of the GPS measurement scenarios. The filter includes unique error evaluation capabilities to assess effects from mismodeling. Process noise plays a key role in the orbit determination for stochastic behavior of transmitter/receiver clocks, atmospheric-induced delay fluctuations, and unmodeled spacecraft accelerations. Present GPS orbit accuracy is better than 1 m, with ground baselines determined simultaneously to relative accuracy of 1.5 parts in 10 to the 8th over several thousand km distance.

Lichten, Stephen M.↗
NASA NTRS1994

VLA stereoscopy of solar active regions. 1: Method and tests

We develop a new technique for extracting three-dimensional information from multiday solar Very Large Array (VLA) observations. While standard stereoscopic methods provide a three-dimensional view of an object by combining simultaneous observations from two different aspect angles, we relax the condition of simultaneity and exploit solar rotation to vary the aspect angle. The solar radio images are decomposed into Gaussian source components, which are then cross-correlated in maps from preceding and following days. This provides measurements of the three-dimensional position of correlated source centroids. In this first paper, we describe the stereoscopic method and perform tests with simulated and real radio maps (from the VLA at 20 cm), in order to study the accuracy of altitude measurements, and the limitations introduced by (i) source confusion, (ii) source motion, and (iii) the assumed differential rotation rate. The tests demonstrate that (i) the information content of a VLA map relevant for stereoscopic correlation can be conveniently represented in terms of a small number of Gaussian components; (ii) the fitting of the three-dimensional source position is stable within a numerical accuracy of less than or approximately equal to 0.02 map pixels, (iii) the relative accuracy of the altitude determination is uniform over the solar disk, and (iv) source confusion does not affect the accuracy of stereoscopic position measurements for sources with a signal-to-noise ratio of greater than or approximately equal to 36.

Aschwanden, Markus J.↗
NASA NTRS2023

Mesospheric and Upper Stratospheric Temperatures From OMPS-LP

We report the development of a temperature profile data set from the Ozone Mapping and Profiler Suite Limb Profiler (OMPS-LP) instrument on the Suomi NPP satellite. The data set covers a roughly 10 year period from 2012 to 2022, and temperatures are provided in the altitude range between 35 and 70 km. The algorithm uses daytime Rayleigh scattered radiation near 350 nm to estimate atmospheric density profiles, which are vertically integrated using the hydrostatic equation to estimate atmospheric pressure. Temperature profiles are then derived using the ideal gas law. Spectral structures in the OMPS-LP radiances are a source of systematic errors that limit the absolute accuracy to ±2 K. However, since the systematic errors do not change significantly over time, the relative accuracy is better than ±1 K. Our temperature data set has been designed to supplement global temperature maps produced by assimilation of data from traditional meteorological sensors, including GNSS radio occultation sensors, that provide high quality atmospheric temperature profiles up to 40–55 km. We show comparisons to other co-located temperature datasets to validate our product.

Observations of Mesospheric and Upper Stratospheri↗
NASA NTRS1984

Experiences performing conceptual design optimization of transport aircraft

Optimum Preliminary Design of Transports (OPDOT) is a computer program developed at NASA Langley Research Center for evaluating the impact of new technologies upon transport aircraft. For example, it provides the capability to look at configurations which have been resized to take advantage of active controls and provide and indication of economic sensitivity to its use. Although this tool returns a conceptual design configuration as its output, it does not have the accuracy, in absolute terms, to yield satisfactory point designs for immediate use by aircraft manufacturers. However, the relative accuracy of comparing OPDOT-generated configurations while varying technological assumptions has been demonstrated to be highly reliable. Hence, OPDOT is a useful tool for ascertaining the synergistic benefits of active controls, composite structures, improved engine efficiencies and other advanced technological developments. The approach used by OPDOT is a direct numerical optimization of an economic performance index. A set of independent design variables is iterated, given a set of design constants and data. The design variables include wing geometry, tail geometry, fuselage size, and engine size. This iteration continues until the optimum performance index is found which satisfies all the constraint functions. The analyst interacts with OPDOT by varying the input parameters to either the constraint functions or the design constants. Note that the optimization of aircraft geometry parameters is equivalent to finding the ideal aircraft size, but with more degrees of freedom than classical design procedures will allow.

Arbuckle, P. D.↗
NASA NTRS1979

Mapping of sea ice and measurement of its drift using aircraft synthetic aperture radar images

Side-looking radar images of Arctic sea ice were obtained as part of the Arctic Ice Dynamics Joint Experiment. Repetitive coverages of a test site in the Arctic were used to measure sea ice drift, employing single images and blocks of overlapping radar image strips; the images were used in conjunction with data from the aircraft inertial navigation and altimeter. Also, independently measured, accurate positions of a number of ground control points were available. Initial tests of the method were carried out with repeated coverages of a land area on the Alaska coast (Prudhoe). Absolute accuracies achieved were essentially limited by the accuracy of the inertial navigation data. Errors of drift measurements were found to be about + or - 2.5 km. Relative accuracy is higher; its limits are set by the radar image geometry and the definition of identical features in sequential images. The drift of adjacent ice features with respect to one another could be determined with errors of less than + or - 0.2 km.

Leberl, F.↗
NASA NTRS1987

Aircraft positioning using Global Positioning System carrier phase data

Results from a flight test of a GPS carrier phase tracking receiver operated on a NASA Orion P-3 aircraft are presented. The trajectory of the aircraft relative to a second, fixed receiver has been determined. The test was made over water, and the GPS vertical trajectory is compared to airborne lidar measured altitude data from the NASA Airborne Oceanographic Lidar. The two data sets compare with a relative accuracy of 12 centimeters rms, under poor GPS satellite geometry for vertical positioning. Analysis indicates that 1 to 2 centimeters relative vertical positioning is achievable with carrier phase tracking receivers and good GPS geometry.

Krabill, William B.↗
NASA NTRS2010

Potential Utility of the Real-Time TMPA-RT Precipitation Estimates in Streamflow Prediction

We investigate the potential utility of the real-time Tropical Rainfall Measuring Mission (TRMM) Multi-satellite Precipitation Analysis (TMPA-RT) data for streamflow prediction, both through direct comparisons of TMPA-RT estimates with a gridded gauge product, and through evaluation of streamflow simulations over four tributaries of La Plata Basin (LPB) in South America using the two precipitation products. Our assessments indicate that the relative accuracy and the hydrologic performance of TMPA-RT-based streamflow simulations generally improved after February 2005. The improvements in TMPA-RT since 2005 are closely related to upgrades in the TMPA-RT algorithm in early February, 2005 which include use of additional microwave sensors (AMSR-E and AMSU-B) and implementation of different calibration schemes. Our work suggests considerable potential for hydrologic prediction using purely satellite-derived precipitation estimates (no adjustments by in situ gauges) in parts of the globe where in situ observations are sparse.

Su, Fengge↗
NASA NTRS1974

GEOS observation systems intercomparison investigation results

The results of an investigation designed to determine the relative accuracy and precision of the different types of geodetic observation systems used by NASA is presented. A collocation technique was used to minimize the effects of uncertainties in the relative station locations and in the earth's gravity field model by installing accurate reference tracking systems close to the systems to be compared, and by precisely determining their relative survey. The Goddard laser and camera systems were shipped to selected sites, where they tracked the GEOS satellite simultaneously with other systems for an intercomparison observation.

Berbert, J. H.↗
NASA NTRS1981

Comments on the Leimanis solution of self-excited rigid body

An attempt is made to apply the solutions contained in a book by Leimanis (1965), which includes the Bodewadt solution, to the performance assessment of the Galileo spacecraft during spin up and spin down maneuvers. Because the Galileo is not precisely symmetric, however, the Bodewadt solution fails to achieve the desired accuracy for useful analysis. It is noted that in the case of the Leimanis solution, the analytic results are incorrect for theoretical reasons. In order to remedy this situation, analytic solutions are developed which satisfy the criterion of high accuracy and provide a useful analytic tool for the performance assessment and maneuver analysis of the Galileo spacecraft and many similar near symmetric spinning spacecraft. Simulation results suggest the relative accuracies of the Bodewadt solution and the author's solution, while the restricted regions of validity of the Leimanis solution are clearly indicated.

Longuski, J. M.↗
NASA NTRS1981

Quantitative interpretation of cloud radiances observed with a 94 GHz scanning radiometer

A description is presented of the results of a theoretical study to evaluate the remote sensing technique to determine integrated liquid water content. The considered technique uses 94 GHz passive microwave observations as applied to nonprecipitation clouds over the ocean. The study indicates that it is possible to infer the precipitable water of the atmosphere with a useful accuracy from a single 94 GHz nadir measurement and an estimated sea surface temperature. It is demonstrated that the integrated liquid water content of nonprecipitable clouds can be estimated with a relative accuracy of 20% to 30% depending on the atmospheric water vapor content from a microwave passive measurement at 94 GHz in the presence of clouds and in cloud free areas in the vicinity of the cloud in conjunction with information on the sea surface and cloud top temperatures.

Szejwach, G.↗
NASA NTRS2002

Evaluation of Small Mass Spectrometer Systems

This work is aimed at understanding the aspects of designing a miniature mass spectrometer (MS) system. A multitude of commercial and government sectors, such as the military, environmental agencies and industrial manufacturers of semiconductors, refrigerants, and petroleum products, would find a small, portable, rugged and reliable MS system beneficial. Several types of small MS systems are evaluated and discussed, including linear quadrupole, quadrupole ion trap, time of flight and sector. The performance of each system in terms of accuracy, precision, limits of detection, response time, recovery time, scan rate, volume and weight is assessed. A performance scale is setup to rank each systems and an overall performance score is given to each system. All experiments involved the analysis of hydrogen, helium, oxygen and argon in a nitrogen background with the concentrations of the components of interest ranging from 0-5000 part-per-million (ppm). The relative accuracies of the systems vary from < 1% to approx. 40% with an average below 10%. Relative precisions varied from 1% to 20%, with an average below 5%. The detection limits had a large distribution, ranging from 0.2 to 170 ppm. The systems had a diverse response time ranging from 4 s to 210 s as did the recovery time with a 6 s to 210 s distribution. Most instruments had scan times near, 1 s, however one instrument exceeded 13 s. System weights varied from 9 to 52 kg and sizes from 15 x 10(exp 3)cu cm to 110 x 10(exp 3) cu cm.

Arkin, C. Richard↗
NASA NTRS1992

A three-parameter approximation for radiative transfer in nonhomogeneous atmospheres - Application to the O3 9.6-micron band

A three-parameter scaling approximation is developed in conjunction with random models for the computation of transmittance along nonhomogeneous atmospheres. In addition to the scaled path length and pressure, a third parameter is introduced to account for intermediate absorption. With reference to the results derived from line-by-line calculations, the accuracy of this scaling approximation is assessed in different atmospheric conditions. For the O3 9.6-micron band where the Curtis-Godson and other conventional scaling methods usually produce large errors, the present model can achieve relative accuracies within about 1 percent in transmittance and the downward surface flux. Accuracy of about 0.15 K/d can be obtained in cooling rate calculations. The present three-parameter approximation is well suited for radiative transfer parameterizations in which the demand for high accuracy is required in the transmittance and flux calculations.

Fu, Qiang↗
NASA NTRS2006

Proceedings of the 2004 High Spatial Resolution Commercial Imagery Workshop

Topics covered include: NASA Applied Sciences Program; USGS Land Remote Sensing: Overview; QuickBird System Status and Product Overview; ORBIMAGE Overview; IKONOS 2004 Calibration and Validation Status; OrbView-3 Spatial Characterization; On-Orbit Modulation Transfer Function (MTF) Measurement of QuickBird; Spatial Resolution Characterization for QuickBird Image Products 2003-2004 Season; Image Quality Evaluation of QuickBird Super Resolution and Revisit of IKONOS: Civil and Commercial Application Project (CCAP); On-Orbit System MTF Measurement; QuickBird Post Launch Geopositional Characterization Update; OrbView-3 Geometric Calibration and Geopositional Accuracy; Geopositional Statistical Methods; QuickBird and OrbView-3 Geopositional Accuracy Assessment; Initial On-Orbit Spatial Resolution Characterization of OrbView-3 Panchromatic Images; Laboratory Measurement of Bidirectional Reflectance of Radiometric Tarps; Stennis Space Center Verification and Validation Capabilities; Joint Agency Commercial Imagery Evaluation (JACIE) Team; Adjacency Effects in High Resolution Imagery; Effect of Pulse Width vs. GSD on MTF Estimation; Camera and Sensor Calibration at the USGS; QuickBird Geometric Verification; Comparison of MODTRAN to Heritage-based Results in Vicarious Calibration at University of Arizona; Using Remotely Sensed Imagery to Determine Impervious Surface in Sioux Falls, South Dakota; Estimating Sub-Pixel Proportions of Sagebrush with a Regression Tree; How Do YOU Use the National Land Cover Dataset?; The National Map Hazards Data Distribution System; Recording a Troubled World; What Does This-Have to Do with This?; When Can a Picture Save a Thousand Homes?; InSAR Studies of Alaska Volcanoes; Earth Observing-1 (EO-1) Data Products; Improving Access to the USGS Aerial Film Collections: High Resolution Scanners; Improving Access to the USGS Aerial Film Collections: Phoenix Digitizing System Product Distribution; System and Product Characterization: Issues Approach; Innovative Approaches to Analysis of Lidar Data for the National Map; Changes in Imperviousness near Military Installations; Geopositional Accuracy Evaluations of QuickBird and OrbView-3: Civil and Commercial Applications Project (CCAP); Geometric Accuracy Assessment: OrbView ORTHO Products; QuickBird Radiometric Calibration Update; OrbView-3 Radiometric Calibration; QuickBird Radiometric Characterization; NASA Radiometric Characterization; Establishing and Verifying the Traceability of Remote-Sensing Measurements to International Standards; QuickBird Applications; Airport Mapping and Perpetual Monitoring Using IKONOS; OrbView-3 Relative Accuracy Results and Impacts on Exploitation and Accuracy Improvement; Using Remotely Sensed Imagery to Determine Impervious Surface in Sioux Falls, South Dakota; Applying High-Resolution Satellite Imagery and Remotely Sensed Data to Local Government Applications: Sioux Falls, South Dakota; Automatic Co-Registration of QuickBird Data for Change Detection Applications; Developing Coastal Surface Roughness Maps Using ASTER and QuickBird Data Sources; Automated, Near-Real Time Cloud and Cloud Shadow Detection in High Resolution VNIR Imagery; Science Applications of High Resolution Imagery at the USGS EROS Data Center; Draft Plan for Characterizing Commercial Data Products in Support of Earth Science Research; Atmospheric Correction Prototype Algorithm for High Spatial Resolution Multispectral Earth Observing Imaging Systems; Determining Regional Arctic Tundra Carbon Exchange: A Bottom-Up Approach; Using IKONOS Imagery to Assess Impervious Surface Area, Riparian Buffers and Stream Health in the Mid-Atlantic Region; Commercial Remote Sensing Space Policy Civil Implementation Update; USGS Commercial Remote Sensing Data Contracts (CRSDC); and Commercial Remote Sensing Space Policy (CRSSP): Civil Near-Term Requirements Collection Update.

Source record↗