Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RUPTURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Dynamic Rupture Modeling of the M7.1, 2019 Ridgecrest, California, Earthquake

An important part of the simulation technique implemented in the strong motion prediction recipe developed in Japan, originally proposed by Irikura and Miyake (2011) is the earthquake rupture characterization that is based on established empirical scaling relationships between source parameters and seismic moment. These scaling relationships and rupture characterization are derived from recorded data and are tested by simulations. Recent analysis of results obtained with the Recipe for the 2016 M7.1 Kumamoto earthquake performed by several researchers, indicate that in order to reproduce near-fault long-period ground motions with permanent displacements, typical for earthquakes with surface rupturing, the recipe needs modifications. In particular, improvements are required in characterizing the rupture kinematics at shallow depths, above the seismogenic zone (Irikura et al., 2019). Modeling of rupture dynamics for recorded earthquakes, and numerical simulations for different rupture scenarios, provides physical constrains on slip evolution in time and space, which can be used in adjustments of empirical source scaling relationships for large crustal earthquakes. In this study we mainly focused on rupture dynamics modeling of the 2019 M7 Ridgecrest, California earthquake. The characterization of the kinematic rupture model derived from the dynamic rupture models of this earthquake can inform further refinements of rupture modeling proposed by the Recipe. Through different rupture scenarios we investigated potential relationships between characteristics of Long Period Ground Motion Generation Area (LMGA), used in the Recipe, and asperity depth and rupture initiation.

58 GEOSCIENCES↗

MECHANISTIC MULTIPHYSICS MODELING OF CLADDING RUPTURE IN NUCLEAR FUEL RODS DURING LOSS-OF-COOLANT ACCIDENT CONDITIONS

The Loss of Coolant Accident (LOCA) is a design basis accident that is included as part of the safety analysis of nuclear power plants. As the nuclear industry desires to increase the cycle length and discharge burnup of existing nuclear power plants they must demonstrate safe operation during a LOCA on high burnup fuel. During a LOCA transient on high burnup fuel rods, the rods may undergo a process known as fuel fragmentation, relocation, and dispersal (FFRD). To permit dispersal, the cladding encapsulating the fuel must rupture with an opening size large enough to allow the fragmented fuel particles to release. Current licensing tools used by industry and the United States Nuclear Regulatory Commission are limited in geometric fidelity and materials that can be analyzed. These simulation tools generally employ a quasi-two-dimensional (1.5D or Layered1D) or 2D-RZ axisymmetric geometric representations exclusively. While a valid approach under some instances, there are times when important physics have an asymmetric behavior in the fuel rod. Examples include fuel fragmentation, thermal-hydraulic boundary conditions, and cladding rupture, all of which are important for LOCA analysis. As industry pursues burnup extensions it must be demonstrated that fuel dispersal can be mitigated or eliminated. To do this, an understanding of the rupture opening after cladding failure is required. This work presents the development of a model for predicting the size and location of the rupture opening in failed fuel rods during LOCA conditions using advanced modeling and simulation tools. In order to supply the rupture model with appropriate boundary conditions, improvements to fuel fragmentation, axial relocation and oxidation modeling were required. First, the eXtended Finite Element Method (XFEM) is used to mechanistically predict the number of fuel fragments that form due to material strength randomization, criteria for strength randomization, mesh density, power ramping rates and irradiation effects. These predictions with associated uncertainty were compared to empirical correlations developed for UO2 verifying that they can be used with increased confidence in subsequent axial relocation analyses. Secondly, a new first-of-its-kind Layered2D computational framework was developed that provides the ability to apply azimuthally varying boundary conditions while providing discrete layers to track fuel movement during the LOCA. An existing fuel axial relocation model developed for Layered1D was extended to work within the Layered2D framework. A large sensitivity study was performed on the initial version of the model to identify modeling parameters of particular importance, with the emissivity used for radiation after blowdown being the primary source of uncertainty. Then, a simplistic approach to incorporate mechanical degradation of the cladding due to oxidation was also developed to investigate the impact of reduced cladding thickness on predictions of the time to failure of cladding tubes. It was found that the cladding will typically rupture prior to a reduction in thickness that is sufficient to impact the rupture behavior. A model was then developed for predicting cladding rupture that transfers the cladding surface temperatures, rod internal and external pressures, fast neutron fluence, and fast neutron flux from a more detailed Layered1D, Layered2D, or 2D-RZ analysis to a 3D cladding only analysis. Comparisons of the rupture model to a few experiments indicate reasonable predictions. The rupture model was then applied to two accident tolerant fuel concepts (FeCrAl and Cr-coated Zircaloy) where it predicted that both ATF concepts would have smaller rupture openings and delayed rupture times than the standard Zircaloy-4 cladding material under identical loading conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Model for determining rupture area in Zircaloy cladding under LOCA conditions

The dispersal of nuclear fuel through a cladding rupture opening during a transient event is the primary safety concern preventing the United States nuclear industry from extending burnup beyond a peak rod average burnup of 62 GWd/tU. The majority of research thus far has prioritized understanding, or at a minimum prioritized quantifying, fuel fragmentation and pulverization as a function of burnup and to a lesser extent onset temperature. Early high burnup loss-of-coolant accident tests performed at the Halden Boiling Water Reactor evaluated the impact of relocation on cladding temperature, whereas historical and recent cladding burst tests focused primarily on generating data related to cladding balloon and burst timing. However, very little effort has been put forth to develop a relationship for determining the rupture opening dimensions for Zircaloy cladding tubes bursting during a simulated light water reactor loss-of-coolant accident. This is significant because high burnup loss-of-coolant accident data suggest dispersal could be limited by the size of the rupture opening or rupture dimensions, thereby minimizing the safety concern. Therefore, the purpose of this research is to build a database composed of all simulated loss-of-coolant accident data to develop an empirical model that conservatively captures the rupture opening dimensions and translates those dimensions to rupture area. Analysis of the experimental data indicates the rupture dimensions are strongly correlated to the peak balloon strain. This relationship is leveraged to develop a rupture length empirical correlation as a function of peak balloon strain and a rupture width empirical correlation as a function of rupture length. Outliers in the experimental data are identified and discussed. Finally, the rupture opening empirical model is presented in such a way for general implementation into high fidelity fuel performance codes or fuel performance codes used for safety analyses.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Geologic investigations of a 'slip gap' in the surficial ruptures of the 1992 Landers earthquake, southern California

A 3-km-long gap in the dextral surficial rupture of the 1992 M(sub W) = 7.3 Landers earthquake occurs at the north end of a major fault stepover between the Johnson Valley and Homestead Valley faults. This gap is situated along a segment of the Landers rupture that has been modeled geophysically as having a deficit in average slip at depth. To better evaluate the nature of the slip gap, we document in detail the character and distribution of surficial rupture within it. Along the gap, is a northwest trending thrust fault rupture with an average of less than 1 m of northeast directed reverse-slip and nearly no oblique right slip. We interpret this rupture to be limited to the shallow crust of the northern end of the stepover and to have been the secondary result of dextral shear, rather than a mechanism of rigid-block slip-transfer from the Landers-Kickapoo fault. A zone of en echelon extensional ruptures also occurs along the slip gap, which we interpret as the secondary result of diffuse dextral shear that accommodated less than 0.5 m of west-northwest extension. These secondary ruptures represent a discontinuity in the surficial dextral ruptre of the Landers earthquake, which we propose resulted from the lack of a mature fault connection between the Johnson Valley and Homestead Valley faults. The rupture pattern of the slip gap implies a significant deficit in net surficial slip, which compares favorably with some geophysical models. Aspects of this rupture pattern also suggest a temporal sequence of rupture that compares favorably with geophysical interpretations of the dynamic rupture propagation.

Spotila, James A.↗

Simulating the Transport and Rupture of Pollen in the Atmosphere

Pollen, one type of primary biological aerosol particle (PBAP), is emitted from the terrestrial biosphere and can undergo physical changes in the atmosphere via particle rupture. To examine the fate of pollen and its atmospheric processing, a pollen emission and transport scheme is coupled to the Weather Research and Forecasting Model with Chemistry (WRF-Chem). We simulate the emission of pollen and its impacts on the cloud properties and precipitation in the Southern Great Plains from 12 to 19 April 2013, a period with both high pollen emissions and convective activity. We conduct a suite of ensemble runs that simulate primary pollen and three different pollen rupture mechanisms that generate subpollen particles, including (a) high humidity-induced surface rupture, (b) high humidity-induced in-atmosphere plus surface rupture, and (c) lightning-induced rupture, where in-cloud and cloud-to-ground lightning strikes trigger pollen rupture events. When relative humidity is high (>80%), coarse primary pollen (~1 μg m –3 ) is converted into fine subpollen particles (~1.2e –4 μg m –3 ), which produces 80% more subpollen particles than lightning-induced rupture. The in-atmosphere humidity-driven rupture predominantly produces subpollen particles, which is further enhanced during a frontal thunderstorm. During strong convection, vertical updrafts lift primary pollen and subpollen particles (~0.5e –4 μg m –3 ) to the upper troposphere (~12 km) and laterally transports the ruptured pollen in the anvil top outflow. In regions of high pollen and strong convection, ruptured pollen can influence warm cloud formation by decreasing low cloud (<4 km) cloud water mixing ratios and increasing ice phase hydrometeors aloft (>10 km)

54 ENVIRONMENTAL SCIENCES↗

3-D Simulations of earthquakes rupture jumps: 1. Homogeneous pre-stress conditions

SUMMARY Observational and modelling studies indicate that earthquake ruptures can jump between fault sections as large as ∼3 and ∼5 km for compressional and extensional offsets, respectively. Here, we compare characteristics of the rupture jump process on parallel but offset fault sections from traditional 3-D dynamic rupture simulations governed by slip weakening friction using the finite element code, FaultMod, to those from quasi-dynamic simulations governed by rate- and state-dependent friction (rate-state friction) using the code RSQSim. These simulations use spatially uniform initial stresses. For a variety of measures the rupture renucleation position on the offset fault, the rate-state friction and slip weakening friction models produce very similar results. The principal difference is the additional occurrence of delayed rupture jumps that arise from the time- and stress-dependent nucleation that is characteristic of rate-state friction. For immediate rupture jumps, models with slip weakening friction span greater offsets than those with rate-state friction. However the jump distances are nearly identical when delayed rupture jumps are included in the comparisons. We propose that delayed rupture jumps are the likely mechanism for adjacent large-earthquake pairs and clusters. Based on the similarity of renucleation positions with both dynamic and quasi-dynamic models, we conclude that the renucleation positions for rupture initiation on the receiver fault (separated by less than ∼3 km from the source fault) are primarily controlled by static stress changes induced by slip on the initiating fault. However, in light of the slightly greater maximum jump distances (>3 km) seen with the dynamic slip weakening friction model, dynamic stress changes from seismic waves play an increasingly important role as offset distances increase.

, RSQSim↗

Refinements to the Graves–Pitarka Kinematic Rupture Generator, Including a Dynamically Consistent Slip-Rate Function, Applied to the 2019 Mw 7.1 Ridgecrest Earthquake

The main objective of this study is to develop physics–based constraints on the spatiotemporal variation of the slip–rate function using a simplified dynamic rupture model. First, we performed dynamic rupture modeling of the 2019 M w 7.1 Ridgecrest, California, earthquake, to analyze the effects of depth–dependent stress and material friction on slip rate. Then, we used our modeling results to guide refinements to the slip–rate function that were implemented in the Graves–Pitarka kinematic rupture generation technique. The dynamic ruptures were computed on a surface–rupturing, planar strike–slip fault that includes a weak (negative to low–stress–drop) zone in the upper 4 km of the crust. Below the weak zone, we placed high–stress–drop patches designed to mirror the large–slip areas seen in various rupture model inversions of the event. The locations of the high–stress–drop patches and the hypocenter were varied in multiple realizations to investigate how changing the dynamic conditions affected the resulting rupture kinematics, in particular, the slip rate. From these simulations, we observed a systematic change in the shape of the slip–rate function from Kostrov type below the weak zone to a predominantly symmetric shape within the weak zone, along with a depth–dependent reduction of peak slip rate. We generalized these shallow rupture features into a depth–dependent parametric variation of the slip–rate function and implemented it in the Graves–Pitarka kinematic rupture model generator. The performance of the updated kinematic approach was then verified in 0–4 Hz simulations of the M w 7.1 Ridgecrest earthquake, which showed that incorporating the depth–dependent variation in the shape of the slip–rate function improves the fit to the observed near–fault ground motions in the 0.5–3 s period range.

58 GEOSCIENCES↗

Rupture Dynamics Simulations of Shallow Crustal Earthquakes on Reverse Slip Faults

The main goal of this study was to perform dynamic rupture simulations in order constrain the characterization of kinematic rupture models implemented in techniques for simulating strong ground motion for crustal earthquakes. First, we investigated the rupture process of the 2008 Iwate-Miyagi Nairiku earthquake by developing a dynamic rupture model on a reverse fault using a trial-and-error technique that produced a slip distribution and near-fault ground motion that matched the recorded ones. The simulations were performed in the frequency range 0-2 Hz, using a 3D staggered grid finite-difference method and a linear slip weakening friction law. Constrained by the observed slip distribution and consistent with dynamic rupture models, the derived kinematic rupture model of the Iwate-Miyagi Nairiku earthquake contains areas with relatively large slip rate, representing strong motion generation areas, set against lower amplitude heterogeneous background slip, and a relatively low slip rate in the weak zone of the top-most crust (upper 3km). Second, we performed rupture dynamics modeling to constrain shallow slip characterization in rupture models for strike-slip crustal earthquakes. The objective was to establish general rules about the characterization of slip rate function and slip at shallow depths and in the strong motion generation areas (SMGAs). The simulations of spontaneous rupture were performed in the frequency range 0-2.0Hz, using a 3D staggered-grid finite-difference method and a layer over half-space 1D crustal velocity model with a minimum shear-wave velocity of 2.8 km/s. In order to account for changes in material ductility and reduction of stress drop, observed in the shallow crust (upper 3-5 km), and the transition from ductile state to brittle state in the upper seismogenic zone, in our stress models we included a shallow weak zone (<4km). In this zone the stress drop was set to zero at the free surface and gradually increased with depth, while the slip weakening distance was set to 75 cm at the free surface and decreased to 50 cm at the base of the weak zone. As in the case of reverse faulting during the Iwate-Miyagi Nairiku earthquake, from these computations we found a systematic change in the shape of the slip-rate function, from Kostrov-type in the deeper part of the fault to a more symmetric cosine-type in the upper few kilometers, near the free-surface. Moreover, the average slip duration in the weak zone, with respect to slip duration in the deeper parts of the fault, increases by at most a factor of 1.5. We found a systematic and gradual change in the shape of the slip-rate function from Kostrov-type in the asperity areas (SMGAs), to more symmetric cosine-type in the upper few km near the free-surface, on the long period motion generation area (LMGA). The effective rise time in the LMGA, with respect to that in the SMGAs, increases by at most a factor of 2. Effective rise time is the time difference between the time at which the slip rate drops to a level that is equal to 25% of its peak and the onset time of the signal. In addition, the slip in the LMGA located above the SMGAs is almost the same as the one in the SMGAs, and about 1.5 times larger than the average slip.

58 GEOSCIENCES↗

Testing Dynamic Earthquake Rupture Models Generated With Stochastic Stress Drop

In this study we investigate the performance of rupture dynamics modeling using heterogenous stress for a M6.5 crustal earthquake on a strike slip vertical fault. In our simulations we used heterogenous stress drop models with correlated stochastic perturbations following the work of Pitarka et al. (2009). The stress model with multiscale variability is designed to accommodate high-stress drop asperity areas and small-scale spatial stress variations. The stress drop and size of asperities are estimated following the IM2011 (Irikura and Miyake, 2011) recipe. In our spontaneous rupture modeling we use a linear slip weakening friction law, with depth depend strength excess, dynamic stress drop and slip weakening distance Dc. Our strategy in preparing the model parameters with vertical and lateral variability is in agreement with observations of earthquake rupture that have confirmed the existence of a shallow weak rupture zone consisting of ductile crustal material, located in the upper 4 km of the crust, and brittle seismogenic zone, underlying the weak zone. The primary objective of our study is to develop a procedure for preparing dynamic rupture models with multiscale variability, and validate spontaneous rupture modeling of strike-slip faults by comparing the resulting rupture kinematics and near-fault ground motion with empirical models for this type of rupture.

58 GEOSCIENCES↗

Multi Segment Fault Rupture Modeling and Strong Ground Motion Simulation Using Irikura, Japan Recipe: Implementation in the in SCEC BB Platform

The project had two main objectives. The first objective was to complete the implementation of an earthquake rupture generator based on the method proposed by Irikura and Miyake, also known as Irikura recipe (IM2011 method hereafter), in the BBP by extending its formulation to multi-segment rupture, and developing the software infrastructure. The second objective was to investigate the possibility of using the earthquake rupture generator as a standalone BBP rupture module that can be attached to other strong ground motion simulation methods already in use in the BBP. We successfully tested and validated the IM2011 multi-segment rupture generator in conjunction with Graves and Pitarka method (GP, hereafter) one of the BBP methods, and performed simulations of the M7.0 2016 Kumamoto, Japan earthquake. IM2011 is the most popular method in Japan that is used to simulate strong ground motion from Japanese crustal earthquakes. In response to technical requirements of the BBP, we made Irikura’s rupture generator procedure compatible with multi-segment rupture modeling approach, currently being adopted by BBP. The recipe is now fully functional on the BBP. This project benefited from the collaboration of the PI with professor Kojiro Irikura of Aichi Institute of Technology, Japan, assistant professor Hiroe Miyake of University of Tokyo, head of the Japanese side of collaboration with SCEC, and Dr.Iwaki and Dr. Morikawa, researchers at NIED, during which we identified rupture parameters that needed to be adjusted and investigated.

58 GEOSCIENCES↗

Cyclic creep-rupture behavior of three high-temperature alloys.

Study of some important characteristics of the cyclic creep-rupture curves for the titanium alloy 6Al-2Sn-4Zr-2Mo at 900 and 1100 F (755 and 865 K), the cobalt-base alloy L-605 at 1180 F (910 K), and for two hardness levels of 316 stainless steel at 1300 F (980 K). The cyclic creep-rupture curve relates tensile stress and tensile time-to-rupture for strain-limited cyclic loading and has been found to be independent of the total strain range and the level of compressive stress employed in the cyclic creep-rupture tests. The cyclic creep-rupture curve was always found to be above and to the right of the conventional (constant load) monotonic creep-rupture curve by factors ranging from 2 to 10 in time-to-rupture. This factor tends to be greatest when the creep ductility is large. Cyclic creep acceleration was observed in every cyclic creep-rupture test conducted. The phenomenon was most pronounced at the highest stress levels and when the tensile and compressive stresses were completely reversed. In general, creep rates were found to be lower in compression than in tension for equal true stresses. The differences, however, were strongly material-dependent.

Halford, G. R.↗

Intermediate Temperature Stress Rupture of Woven SiC Fiber, BN Interphase, SiC Matrix Composites in Air

Tensile stress-rupture experiments were performed on woven Hi-Nicalon reinforced SiC matrix composites with BN interphases in air. Modal acoustic emission (AE) was used to monitor the damage accumulation in the composites during the tests and microstructural analysis was performed to determine the amount of matrix cracking that occurred for each sample. Fiber fractograph), was also performed for individual fiber failures at the specimen fracture surface to determine the strengths at which fibers failed. The rupture strengths were significantly worse than what would have been expected front the inherent degradation of the fibers themselves when subjected to similar rupture conditions. At higher applied stresses the rate of rupture "?as larger than at lower applied stresses. It was observed that the change in rupture rate corresponded to the onset of through-thickness cracking in the composites themselves. The primary cause of the sen,ere degradation was the ease with which fibers would bond to one another at their closest separation distances, less than 100 nanometers, when exposed to the environment. The near fiber-to-fiber contact in the woven tows enabled premature fiber failure over large areas of matrix cracks due to the stress-concentrations created b), fibers bonded to one another after one or a few fibers fail. i.e. the loss of global load sharing. An@, improvement in fiber-to-fiber separation of this composite system should result in improved stress- rupture properties. A model was den,eloped in order to predict the rupture life-time for these composites based on the probabilistic nature of indin,idual fiber failure at temperature. the matrix cracking state during the rupture test, and the rate of oxidation into a matrix crack. Also incorporated into the model were estimates of the stress-concentration that would occur between the outer rim of fibers in a load-bearing bundle and the unbridged region of a matrix crack after Xia et al. For the lower stresses, this source of stress-concentration was the likely cause for initial fiber failure that would trigger catastrophic failure of the composite.

Morscher, Gregory N.↗

Self-Rupturing Hermetic Valve

For commercial, military, and aerospace applications, low-cost, small, reliable, and lightweight gas and liquid hermetically sealed valves with post initiation on/off capability are highly desirable for pressurized systems. Applications include remote fire suppression, single-use system-pressurization systems, spacecraft propellant systems, and in situ instruments. Current pyrotechnic- activated rupture disk hermetic valves were designed for physically larger systems and are heavy and integrate poorly with portable equipment, aircraft, and small spacecraft and instrument systems. Additionally, current pyrotechnically activated systems impart high g-force shock loads to surrounding components and structures, which increase the risk of damage and can require additional mitigation. The disclosed mechanism addresses the need for producing a hermetically sealed micro-isolation valve for low and high pressure for commercial, aerospace, and spacecraft applications. High-precision electrical discharge machining (EDM) parts allow for the machining of mated parts with gaps less than a thousandth of an inch. These high-precision parts are used to support against pressure and extrusion, a thin hermetically welded diaphragm. This diaphragm ruptures from a pressure differential when the support is removed and/or when the plunger is forced against the diaphragm. With the addition of conventional seals to the plunger and a two-way actuator, a derivative of this design would allow nonhermetic use as an on/off or metering valve after the initial rupturing of the hermetic sealing disk. In addition, in a single-use hermetically sealed isolation valve, the valve can be activated without the use of potential leak-inducing valve body penetrations. One implementation of this technology is a high-pressure, high-flow-rate rupture valve that is self-rupturing, which is advantageous for high-pressure applications such as gas isolation valves. Once initiated, this technology is self-energizing and requires low force compared to current pyrotechnic-based burst disk hermetic valves. This is a novel design for producing a single-use, self-rupturing, hermetically sealed valve for isolation of pressurized gas and/or liquids. This design can also be applied for single-use disposable valves for chemical instruments. A welded foil diaphragm is fully supported by two mated surfaces that are machined to micron accuracies using EDM. To open the valve, one of the surfaces is moved relative to the other to (a) remove the support creating an unsupported diaphragm that ruptures due to over pressure, and/or (b) produce tension in the diaphragm and rupture it.

Tucker, Curtis E., Jr.↗

Ultrasound-guided percutaneous catheter drainage of various types of ruptured amebic liver abscess: a report of 117 cases from a highly endemic zone of India

Objective: To determine the efficacy and safety ultrasound-guided percutaneous catheter drainage (US-PCD) in management of various types of ruptured amebic liver abscess including free rupture (FR) with diffuse intraperitoneal fluid collections (DIFC). Methods: This study analyzed 117 patients with ruptured ALA who underwent US-PCD. The indication for US-PCD was failure to respond to conservative treatment and/or percutaneous needle aspiration. Results: Majority of patients were locally fermented alcohol abusers (95%), and malnourished (75%). Ninety-eight patients had intraperitoneal rupture including 66 contained rupture (CR) with localized intraperitoneal fluid collection (LIFC) and 32 FR with DIFC. Pleuropulmonary complication was found in 19 patients including 13 pleural and 6 pulmonary. A total of 333 catheters were used to drain 202 abscess cavities and associated fluid collections. US-PCD was technically and clinically successful in all cases. Multiple sessions (median 2; range 2–5) of PCD required with upsizing the catheter (median 14 F; range 14–20 F) and placement of additional catheter in 26 (22%) patients. The patients with FR with DIFC required more number of catheters (p = 0.01) and had longer hospital stay (p = 0.01). No major procedure related complication was observed. Six patients developed secondary bacterial infection; two of them presented with cavito-cutaneous fistula at catheter insertion site, and one with cholangitis due to biliary stricture formation necessitating subsequent endoscopic treatment. Post-procedural death occurred from sepsis in a patient with FR. Conclusion: US-PCD is a safe and effective mode of treatment for ruptured ALA including FR with DIFCs. We recommend PCD as a first-line therapy for ruptured ALA.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Dynamics, Radiation, and Overall Energy Budget of Earthquake Rupture With Coseismic Off-Fault Damage

Earthquake ruptures dynamically activate coseismic off–fault damage around fault cores. Systematic field observation efforts have shown the distribution of off–fault damage around main faults, while numerical modeling using elastic–plastic off–fault material models have demonstrated the evolution of coseismic off–fault damage during earthquake ruptures. Laboratory–scale microearthquake experiments have pointed out the enhanced high–frequency radiation due to the coseismic off–fault damage. However, the detailed off–fault fracturing mechanisms, subsequent radiation, and its contribution to the overall energy budget remain to be fully understood because of limitations of current observational techniques and model formulations. Here, we constructed a new physics–based dynamic earthquake rupture modeling framework, based on the combined finite–discrete element method, to investigate the fundamental mechanisms of coseismic off–fault damage, and its effect on the rupture dynamics, the radiation and the overall energy budget. We conducted a 2–D systematic case study with depth and showed the mechanisms of dynamic activation of the coseismic off–fault damage. We found the decrease in rupture velocity and the enhanced high–frequency radiation in near field due to the coseismic off–fault damage. We then evaluated the overall energy budget, which shows a significant contribution of the coseismic off–fault damage to the overall energy budget even at depth, where the damage zone width becomes narrower. Here, the present numerical framework for the dynamic earthquake rupture modeling thus provides new insights into earthquake rupture dynamics with the coseismic off–fault damage.

58 GEOSCIENCES↗

Implications for elastic energy storage in the Himalaya from the Gorkha 2015 earthquake and other incomplete ruptures of the Main Himalayan Thrust

Rupture in the 2015 M7.8 Gorkha earthquake nucleated at the downdip edge of the Main Himalayan Thrust (MHT) near the transition from interseismic locking to aseismic creep beneath the Tibetan plateau, and propagated incompletely towards the Main Frontal Thrusts (MFT). Despite the imposition of a substantial static strain in the mid-décollement, afterslip on the MHT within a year of the earthquake had decayed to negligible levels. Earthquakes that incompletely rupture the MHT (7 < Mw < 7.9) have been relatively common in the past two centuries, and as a consequence heterogeneous patches of stored elastic strain must exist throughout the Himalaya similar to that emplaced by the Gorkha earthquake. We show that these patches of stored strain are not dissipated by creep or by subsequent updip earthquakes, with the possible exceptions of a sequence of moderate earthquakes to the west of the great 1950 Assam earthquake, and to the east of the Kangra 1905 earthquake. It is thus considered likely that mid-décollement strain newly imposed by the Gorkha earthquake, and other recent incomplete ruptures will be incorporated in the rupture of a future much larger earthquake. Incomplete ruptures (i.e. those that nucleate downdip but fail to rupture the frontal thrusts) appear to occur preferentially in parts of the central Himalaya characterized by relatively narrow transition regions of interseismic decoupling (<30 km downdip). Assuming uniform strain at failure these narrow zones are unable to store large amounts of strain energy compared to wide zones of interseismic decoupling. Since the transition from fully locked to a fully creeping rheology depends partly on temperature, to first order the width of the interseismic decoupling transition zone depends on the local dip of the MHT. Where the decoupling zone is narrow (25 km) moderate earthquakes (6 < Mw < 7) are observed to occur at intervals of a few hundred years. Where the transition zone is wide (e.g. Kashmir and Assam, 150 km) great earthquakes nucleate at long time intervals (millennia). Because the cumulative moment release of moderate earthquakes in regions of narrow seismic decoupling is insufficient to keep up with plate convergence, we conclude that megaquakes that eventually sweep through these regions are augmented by the heterogenous fossil strain of former incomplete ruptures. Because great earthquakes in the central Himalaya are inferred to nucleate from moderate earthquakes near the base of the MHT, the preparation zones of these moderate earthquakes may provide opportunities for forecasting the approach of future great earthquakes.

58 GEOSCIENCES↗

Using Multi-scale Dynamic Rupture Models to Improve Ground Motion Estimates: ALCF-2 Early Science Program Technical Report

This project uses dynamic rupture simulations to investigate high-frequency seismic energy generation. The relevant phenomena (frictional breakdown, shear heating, effective normal-stress fluctuations, material damage, etc.) controlling rupture are strongly interacting and span many orders of magnitude in spatial scale, requiring highresolution simulations that couple disparate physical processes (e.g., elastodynamics, thermal weakening, pore-fluid transport, and heat conduction). Compounding the computational challenge, we know that natural faults are not planar, but instead have roughness that can be approximated by power laws potentially leading to large, multiscale fluctuations in normal stress. The capacity to perform 3D rupture simulations that couple these processes will provide guidance for constructing appropriate source models for high-frequency ground motion simulations. The improved rupture models from our multi-scale dynamic rupture simulations will be used to conduct physicsbased (3D waveform modeling-based) probabilistic seismic hazard analysis (PSHA) for California. These calculation will provide numerous important seismic hazard results, including a state-wide extended earthquake rupture forecast with rupture variations for all significant events, a synthetic seismogram catalog for thousands of scenario events and more than 5000 physics-based seismic hazard curves for California.

58 GEOSCIENCES↗

Intermediate Temperature Stress Rupture of a Woven Hi-Nicalon, BN-Interphase, SiC Matric Composite in Air

Woven Hi-Nicalon (TM) reinforced melt-infiltrated SiC matrix composites were tested under tensile stress-rupture conditions in air at intermediate temperatures. A comprehensive examination of the damage state and the fiber properties at failure was performed. Modal acoustic emission analysis was used to monitor damage during the experiment. Extensive microscopy of the composite fracture surfaces and the individual fiber fracture surfaces was used to determine the mechanisms leading to ultimate failure. The rupture properties of these composites were significantly worse than expected compared to the fiber properties under similar conditions. This was due to the oxidation of the BN interphase. Oxidation occurred through the matrix cracks that intersected the surface or edge of a tensile bar. These oxidation reactions resulted in minor degradation to fiber strength and strong bonding of the fibers to one another at regions of near fiber-to-fiber contact. It was found that two regimes for rupture exist for this material: a high stress regime where rupture occurs at a fast rate and a low stress regime where rupture occurs at a slower rate. For the high stress regime, the matrix damage state consisted of through thickness cracks. The average fracture strength of fibers that were pulled-out (the final fibers to break before ultimate failure) was controlled by the slow-crack growth rupture criterion in the literature for individual Hi-Nicalon (TM) fibers. For the low stress regime, the matrix damage state consisted of microcracks which grew during the rupture test. The average fracture strength of fibers that were pulled-out in this regime was the same as the average fracture strength of individual fibers pulled out in as-produced composites tested at room temperature.

Morscher, Gregory N.↗