Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The interactivity of sources and dietary levels of resistant starches – impact on growth performance, starch, and nutrient digestibility, digesta oligosaccharides profile, cecal microbial metabolites, and indicators of gut health in broiler chickens

In a 21-d study, 480 Cobb 500 (off-sex) male broiler chicks were used to investigate the effects of feeding different sources and levels of resistant starches (RS) on growth performance, nutrient and energy utilization, and intestinal health in broiler chickens. The birds were allocated to 10 dietary treatments in a 3 × 3 + 1 factorial arrangement. The factors were 3 RS-sources (RSS): banana starch (BS), raw potato starch (RPS), and high-amylose corn starch (HCS); each at 3 levels (RSL) 25, 50, or 100 g/kg plus a corn-soybean meal control diet. Birds and feed were weighed on d 0, 8, and 21. On d 21, samples of jejunal tissue and digesta were collected for chemical analysis. Data were analyzed using the mixed model procedure of JMP with factor levels nested with the control. In the 0 to 21 phase, the birds fed the RPS diets had higher (P = 0.011) FI than those fed HCS or control diets, and FCR was greater (P = 0.030) in birds that received BS diets than in other diets. RSS × RSL was significant (P < 0.05) for total tract nutrient retention, AME, and AMEn on d 21. The starch digestibility was higher (P < 0.001) in birds that received the control diet than in RS diets, and decreased as RS levels increased, except for HCS. The apparent metabolizable energy (AME) and nitrogen-corrected AME (AMEn) were higher (P < 0.001) in birds fed 100 g/kg HCS diet, with both decreasing with increasing levels of BS and RPS, except for HCS. Relative ileal oligosaccharides profile showed significant (P < 0.05) RSS × RSL with a higher relative abundance of Hex(3) (P = 0.01) and Pent(3) (P = 0.001) in HCS diets. In conclusion, RS may influence gut health and growth performance in broiler chickens through modulation of cecal SCFA and nutrient digestion, but these depend largely on the botanical origin and concentrations of individual RS.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Transformer coupled toroidal wave-heated remote plasma sources operating in Ar/NF 3 mixtures

Remote plasmas are used in semiconductor device manufacturing as sources of radicals for chamber cleaning and isotropic etching. In these applications, large fluxes of neutral radicals (e.g. F, O, Cl, H) are desired with there being negligible fluxes of potentially damaging ions and photons. One remote plasma source (RPS) design employs toroidal, transformer coupling using ferrite cores to dissociate high flows of moderately high pressure (up to several Torr) electronegative gases. In this paper, results are discussed from a computational investigation of moderate pressure, toroidal transformer coupled RPS sustained in Ar and Ar/NF 3 mixtures. Operation of the RPS in 1 Torr (133 Pa) of argon with a power of 1.0 kW at 0.5 MHz and a single core produces a continuous toroidal plasma loop with current continuity being maintained dominantly by conduction current. Operation with dual cores introduces azimuthal asymmetries with local maxima in plasma density. Current continuity is maintained by a mix of conduction and displacement current. Operation in NF 3 for the same conditions produces essentially complete NF 3 dissociation. Electron depletion as a result of dissociative attachment of NF 3 and NF x fragments significantly alters the discharge topology, confining the electron density to the downstream portion of the source where the NFx density has been lowered by this dissociation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

The effect of ram-pressure stripping on dwarf galaxies

ABSTRACT Ram-pressure stripping (RPS) is a well observed phenomenon of massive spiral galaxies passing through the hot intracluster medium (ICM) of galaxy clusters. For dwarf galaxies (DGs) within a cluster, the transformation from gaseous to gas-poor systems by RPS is not easily observed and must happen in the outskirts of clusters. In a few objects in close by galaxy clusters and the field, RPS has been observed. Since cluster early-type DGs also show a large variety of internal structures (unexpected central gas reservoirs, blue stellar cores, composite radial stellar profiles), we aim in this study to investigate how ram pressure (RP) affects the interstellar gas content and therefore the star formation (SF) activity. Using a series of numerical simulations, we quantify the dependence of the stripped-off gas on the velocity of the infalling DGs and on the ambient ICM density. We demonstrated that SF can be either suppressed or triggered by RP depending on the ICM density and the DGs mass. Under some conditions, RP can compress the gas, so that it is unexpectedly retained in the central DG region and forms stars. When gas clouds are still bound against stripping but lifted from a thin disc and fall back, their new stars form an ellipsoidal (young) stellar population already with a larger velocity dispersion without the necessity of harassment. Most spectacularly, star clusters can form downstream in stripped-off massive gas clouds in the case of strong RP. We compare our results to observations.

Steyrleithner, P.↗
DOE OSTI2024

Metallic Coating of Cerium Oxide Microspheres

The ability to remove heat is paramount to nuclear fuel performance and longevity. Retaining fission product and separating fuel from reactor coolant and the environment is also necessary to prevent radiological contamination. Conventional nuclear fuel for commercial light water reactors and radioisotope power systems (RPS) is composed of oxide powders pressed into a pellet (cm-scale) and then sealed into a metal cladding to confine the fuel. What typical fuels lack is a method to surround each particle of nuclear fuel in metal, thus providing a more intimate protection layer for accident tolerance and boosting the thermal extraction from the fuel element. In such a way, metal-coated fuel particles increase heat extraction efficiency over clad-pellet designs while increasing the accident tolerance of the fuel. Metal oxide microspheres have wide-ranging applications, including the realm of fuels for nuclear reactors and RPS. Microspheres of uranium oxide/uranium carbide, mixed uranium/plutonium oxides, transuranics, and thorium fuels have been extensively studied. Pacific Northwest National Laboratory has also demonstrated the production of 238 PuO 2 microspheres for RPS applications. Metal-coated oxide microsphere fuels may also be attractive for other applications such as nuclear thermal rockets, future nuclear reactor designs, and catalysts.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Factors influencing recent trends in retail electricity prices in the United States

This study analyzes the primary drivers of recent state-level trends in U.S. retail electricity prices. We summarize pricing trends, explore descriptive relationships, and employ regression models to quantify the influence of various factors. Although the recent national rise in retail prices has largely tracked inflation, state-level trends vary widely. We identify a number of factors that explain trends in subsets of states. States with the greatest price increases typically exhibited shrinking customer loads—partially linked to growth in net metered behind-the-meter solar—and had renewables portfolio standards (RPS) in concert with relatively costly incremental renewable energy supplies. By contrast, recent utility-scale wind and solar deployment that occurred outside RPS programs (but that benefited from tax incentives) had no discernible impact on increased retail prices. Hurricanes, storms and wildfires also contributed to sizable price increases in some states, most notably in California, where wildfire risk mitigation and liability insurance were major cost drivers. Fluctuations in natural gas prices—particularly following the onset of the Ukraine-Russia war—further contributed to sharp price increases through 2022–2023 in many states, with moderation in 2024. The relative influence of these factors varies across states and over time, and relationships may change in the future. Nonetheless, the findings underscore the diverse set of price determinants and highlight the need for continued research to inform effective policy and ensure customer affordability.

Customer load↗
DOE OSTI2019

Hot Topic Brief: Emerging Policies for Mobilizing Private Sector Investment into Clean Energy in the Philippines

The Philippines has one of the highest electricity prices for commercial and residential consumers in the Association of Southeast Asian Nations (ASEAN) region with prices between $0.12 (commercial) and $0.20 (residential) per kilowatt-hour (kWh) (ERIA 2018). Significant reliance on imported coal and diesel is the primary cause of this cost to ratepayers. This 'hot topic brief' details new policies in the Philippines designed to diversify the country's fuel-mix and the opportunities for investments in renewable energy to reduce prices for consumers and industry. This brief focuses on two recent policies: 1. Renewable Portfolio Standard (RPS): The RPS establishes mandatory targets for each electric distribution utility--both publicly and privately owned--to procure renewable energy through 2030. 2. Green Energy Option Program (GEOP): The GEOP enables companies to independently procure renewable energy from third-party power producers, which can be used to help meet private sector renewable energy goals, unlock lower electricity costs, and increase energy security.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Thermal analyses of high-power advanced thermoacoustic radioisotope power system for future space exploration missions

This paper presents the results of 3-D thermal analyses of the heat source assembly of a 440 We advanced radioisotope power system (RPS) for future space exploration missions. This high thermal efficiency RPS employs a heat source assembly of eight Step 2 General Purpose Heat Source (GPHS) modules and four Thermoacoustic Power Converter (TAPC) units. Each unit is thermally coupled to two GPHS modules. Here, the analyses investigated the temperatures of the Iridium (Ir) alloy cladding of the 238 PuO 2 fuel pellets and the surface of the Fine Weave Pierced Fabric (FWPF) aeroshell in the GPHS modules to ensure reliable operation and safety in case of an unlikely reentry. Conductive coupling of the GPHS modules to the heater heads of the TAPC units produces relatively uniform axial and azimuthal distributions of heat flux and temperature. However, for this case the temperature of the Ir alloy cladding is lower than the desired values of 1173 K to maintain sufficient ductility. Adding a 5 mm wide He filled gap and decreasing the thickness of the graphite sleeve to 10 mm increased Ir cladding temperature to 1197–1174 K, which are in the desired range. The maximum surface temperatures of the FWPF graphite aeroshell of 1022–1131 K is well below the NASA specified limit of 1373 K. In addition, the total mass of the heat source assembly decreased by 19.6 kg, ~43% saving compared to original design.

42 ENGINEERING↗
DOE OSTI2023

Sub-m s−1 upper limits from a deep HARPS-N radial-velocity search for planets orbiting HD 166620 and HD 144579

ABSTRACT Minimizing the impact of stellar variability in radial velocity (RV) measurements is a critical challenge in achieving the 10 cm s−1 precision needed to hunt for Earth twins. Since 2012, a dedicated programme has been underway with HARPS-N, to conduct a blind RV rocky planets search (RPS) around bright stars in the Northern hemisphere. Here we describe the results of a comprehensive search for planetary systems in two RPS targets, HD 166620 and HD 144579. Using wavelength-domain line-profile decorrelation vectors to mitigate the stellar activity and performing a deep search for planetary reflex motions using a trans-dimensional nested sampler, we found no significant planetary signals in the data sets of either of the stars. We validated the results via data-splitting and injection recovery tests. Additionally, we obtained the 95th percentile detection limits on the HARPS-N RVs. We found that the likelihood of finding a low-mass planet increases noticeably across a wide period range when the inherent stellar variability is corrected for using scalpelsU-vectors. We are able to detect planet signals with Msin i ≤ 1 M⊕ for orbital periods shorter than 10 d. We demonstrate that with our decorrelation technique, we are able to detect signals as low as 54 cm s−1, which brings us closer to the calibration limit of 50 cm s−1 demonstrated by HARPS-N. Therefore, we show that we can push down towards the RV precision required to find Earth analogues using high-precision radial velocity data with novel data-analysis techniques.

Anna John, A. (ORCID:0000000217156939)↗
DOE OSTI2025

Calculator For Radioisotope Yields, Targets, And Products

An initial number of atoms in a material (by element or by isotope), defined by ENDF library availability, is used to produce an initial reaction products (RPs). The RPs are decayed using full, analytical solutions to the Bateman equations to calculate the RP inventory at a user-specified time. Since each radioisotope's inventory is known, the proportion to the total may be shown for each isotope. The total dose rate and activity is the main objective for experimenters. Built-in information about many reactors and irradiation positions is available. Full execution and display of results takes 5-10 seconds, depending on the complexity of the input parameters.

Holschuh, ThomasV [Idaho National Laboratory (INL)↗
DOE OSTI2021

Examination of Intergranular Crack on SC0234

The microstructure of the SC0234 weld was evaluated per DA-SPEC-01067, ''General Purpose Heat Source (GPHS) Plutonium-238 Dioxide Fueled Clad Product Specification'' and it was determined that the weld microstructure conformed to the quality requirements. During the examination of weld cross section, the metallographic analysis revealed the presence of a surface crack. Prior visual examination per RPS-TA55-303 had not revealed the crack, nor did the surface photography performed per RPS-TA55-302. The presence of the crack does not violate any of the product specifications called out on DA-SPEC-01067. Although there is a well-documented history of weld hot crack susceptibility in the early development of the DOP-26 iridium alloy, a surface crack such as this had not been documented during welding at Los Alamos. In the interest of better understanding the cause; the product engineer/program recommended further examination of the crack. This report discusses the examination of the crack found in the weld cross section of simulant clad SC0234. Metallography, Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy techniques (EDS) where used in the analysis of the crack and the surrounding weld microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The Costs and Feasibility of Floating Offshore Wind Energy in the O'ahu Region

The State of Hawai'i has set a target to achieve a 100% Renewable Portfolio Standard (RPS) by 2045, and is well suited to become the first state to achieve this goal due to its relatively small load, high electricity prices, heavy reliance on imported fossil fuels, and favorable conditions for wind and solar. The Bureau of Ocean Energy Management contracted NREL to conduct a cost and feasibility study to provide information to decision makers on Hawai'i about the viability of floating offshore wind to be a part of the 100% RPS. We used NREL's Offshore Regional Cost Analyzer (ORCA) spatial cost model to evaluate the Levelized Cost of Energy (LCOE) in the region surrounding O'ahu as this is the island with the highest energy demand. The ORCA results showed that LCOE could range from around $\$$83 MWh to $\$$194 MWh for commercial operation dates in 2019 but has the potential to decrease to $\$$48 MWh - $\$$109 MWh by 2032 due to maturing global supply chains, increasing turbine rating, and new technological innovations. These costs are expected to be competitive with global floating wind costs in the early 2030s. The strong wind resource, proximity to infrastructure on land, and benign metocean conditions can potentially compensate for the logistical complexities of installing projects in Hawai'i far from mainland supply chains if sufficient investments are made to develop ports, grid infrastructure, and workforce on O'ahu to support the construction and operation of offshore wind projects. In addition to the cost results, this report also discusses the likely technologies that would comprise floating wind projects near O'ahu, the existing infrastructure available to projects, unique conditions facing offshore wind in the region such as exposure to hurricanes and limits on allowable export cable capacity, newly developed wind resource data sets for the region, and local stakeholder perspectives on offshore wind.

17 WIND ENERGY↗
DOE OSTI2022

Typical Neutron Emission Spectra for Multi-Mission Radioisotope Thermoelectric Generator Fuel

The Dragonfly rotorcraft currently being designed by the Johns Hopkins Applied Physics Laboratory (APL) is a mission destined to explore, via autonomous flight, the Saturnian moon of Titan and currently scheduled to launch in 2027. This largest moon of Saturn contains a thick, dense atmosphere, that when coupled with the remote distance to the Sun, requires the use of a radioisotope power system (RPS). The multi-mission radioisotope thermoelectric generator (MMRTG) fueled at Idaho National Laboratory is currently the only flight-certified RPS still in production within the Department of Energy complex, thus, an MMRTG was chosen for the Dragonfly mission.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2024

Achieving an 80% Renewable Portfolio in Alaska's Railbelt: Cost Analysis

This study examines the system-level costs and benefits of increased renewable energy deployment in the Railbelt grid, in the context of a proposed 80% renewable portfolio standard (RPS). This work studies the period from 2024 to 2040 and uses a model that simulates the planning, evolution, and operation of the power system to identify the mix of resources that maintains system reliability at the lowest electricity system cost over the period of analysis. The model tracks several reliability metrics, including the ability to serve demand during all hours of the year, even when normal power system failures occur. The model includes several measures (and associated costs) to address the variable output of renewable resources, including additional operating reserves, fuel storage, cycling of fossil plants, and additional equipment needed to maintain system stability. The Reference (least-cost) scenario results in substantial deployment of renewable energy and cost savings, reaching about 76% of Railbelt generation derived from renewables in 2040. Annual savings average about $105 M/year from 2030 to 2040. About 50% of this generation is from wind by 2040. Enforcing an 80% RPS results in about a 2% cumulative reduction in net savings. Demand is met in all scenarios, relying heavily on use of existing hydropower and fossil-fueled generators during periods of low renewable output. Meeting the increase in variability will require substantial changes in how the system is operated, with inverter-based resources providing nearly 100% of electricity during some periods.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Revival and Technology Transfer of 90SrTiO3 Production for Heat Source Applications

Demand for radioisotope power systems (RPS) appears to be on the rise, and it is unlikely that this new demand can be met by plutonium-238. As a result, new heat source designs are under development. One such design is Z1. Z1 is a strontium-90 demonstration heat source developed by Zeno Power Systems in collaboration with the University of Dayton Research Institute and the Pacific Northwest National Laboratory. SrTiO3 was chosen as the fuel form for Z1. SrTiO3 was used to produce dozens of terrestrial RPS decades ago. While this indicates the technology is proven, the skill and experience necessary to effectively produce SrTiO3 has been lost. Recapturing SrTiO3 production technology therefore became necessary. Development started with non-radioactive surrogate experiments using natural strontium. This work showed that the old Oak Ridge flowsheets for SrTiO3 production are quite robust, but some critical pieces of the technology are left out of the old documentation. Specifically, particle sizes of the reagents are critical to producing a phase pure SrTiO3. If the reagent particles are not the right size, then a significant Sr3Ti2O7 phase impurity is observed. This phase impurity was proven to be the result of an incomplete reaction between the strontium and titanium precursors. This technology was transferred to Pacific Northwest National Laboratory where the technology was adapted for use in a hot cell. With the adaptations complete, this technology was used to produce the fuel for Z1 late last year. This represents the first new heat source design produced in the U.S. in over 40 years.

90Sr, strontium titanate, SrTi03, RTG, Radioisotop↗
DOE OSTI2023

NASA Dragonfly Mission MMRTG

The Radioisotope Power Systems (RPS) group at the Idaho National Laboratory (INL) is supporting NASA’s New Frontier class mission, Dragonfly, to explore the Saturn moon Titan. Titan has been observed by both Voyager spacecrafts in 1979 and 1980 and during over 100 close flyby encounters by the Cassini orbiter and subsequent landing of the Huygens probe which landed on Titan in 2005. The probe lasted about 2.5 hours without an RPS due to the thick atmosphere and cold climate but gave scientists valuable insight into the geology of Titan. The surface is composed of vast sand dunes and liquid methane with an atmosphere composed primarily of nitrogen that is 60% more dense as the Earth’s with 1/7th of Earth’s gravity. These conditions allow for exploration using a dual-quadcopter. Due to the extreme temperatures (-290°F or -180°C), changes to the Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) are required. This generator, designated flight unit 4 or MMRTG-F4, is being built by a team lead by INL and includes the prime contractor Aerojet Rocketdyne and their supplier Teledyne Energy System. This poster outlines the mission, the unique challenges and updates the build progress.

42 ENGINEERING↗
DOE OSTI2022

Renewable Portfolio Standard Assessment for Alaska's Railbelt

This memorandum for the Governor of Alaska evaluates the technical feasibility of reaching 80% renewable electricity by 2040 in the Railbelt corridor of Alaska, which represents 75% of Alaska's electric load. This analysis was developed to inform renewable energy portfolio standard (RPS) legislation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Short-lead seasonal precipitation forecast in northeastern Brazil using an ensemble of artificial neural networks

This study assesses the deterministic and probabilistic forecasting skill of a 1-month-lead ensemble of Artificial Neural Networks (EANN) based on low-frequency climate oscillation indices. The predictand is the February-April (FMA) rainfall in the Brazilian state of Ceará, which is a prominent subject in climate forecasting studies due to its high seasonal predictability. Additionally, the study proposes combining the EANN with dynamical models into a hybrid multi-model ensemble (MME). The forecast verification is carried out through a leave-one-out cross-validation based on 40 years of data. The EANN forecasting skill is compared with traditional statistical models and the dynamical models that compose Ceará’s operational seasonal forecasting system. A spatial comparison showed that the EANN was among the models with the smallest Root Mean Squared Error (RMSE) and Ranked Probability Score (RPS) in most regions. Moreover, the analysis of the area-aggregated reliability showed that the EANN is better calibrated than the individual dynamical models and has better resolution than Multinomial Logistic Regression for above-normal (AN) and below-normal (BN) categories. It is also shown that combining the EANN and dynamical models into a hybrid MME reduces the overconfidence of the extreme categories observed in a dynamically-based MME, improving the reliability of the forecasting system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Modular repeat protein sculpting using rigid helical junctions

The ability to precisely design large proteins with diverse shapes would enable applications ranging from the design of protein binders that wrap around their target to the positioning of multiple functional sites in specified orientations. We describe a protein backbone design method for generating a wide range of rigid fusions between helix-containing proteins and use it to design 75,000 structurally unique junctions between monomeric and homo-oligomeric de novo designed and ankyrin repeat proteins (RPs). Of the junction designs that were experimentally characterized, 82% have circular dichroism and solution small-angle X-ray scattering profiles consistent with the design models and are stable at 95 °C. Crystal structures of four designed junctions were in close agreement with the design models with rmsds ranging from 0.9 to 1.6 Å. Electron microscopic images of extended tetrameric structures and ~10-nm-diameter “L” and “V” shapes generated using the junctions are close to the design models, demonstrating the control the rigid junctions provide for protein shape sculpting over multiple nanometer length scales.

59 BASIC BIOLOGICAL SCIENCES↗