Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ROBERT FOX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Method and device for determining bond separation strength using induction heating

An induction heating device includes an induction heating gun which includes a housing, a U-shaped pole piece having two spaced apart opposite ends defining a gap there between, the U-shaped pole piece being mounted in one end of the housing, and a tank circuit including an induction coil wrapped around the pole piece and a capacitor connected to the induction coil. A power source is connected to the tank circuit. A pull test machine is provided having a stationary chuck and a movable chuck, the two chucks holding two test pieces bonded together at a bond region. The heating gun is mounted on the pull test machine in close proximity to the bond region of the two test pieces, whereby when the tank circuit is energized, the two test pieces are heated by induction heating while a tension load is applied to the two test pieces by the pull test machine to determine separation strength of the bond region.

Coultrip, Robert H.↗
DOE OSTI2023

Determinants of cognitive and brain resilience to tau pathology: a longitudinal analysis

Mechanisms of resilience against tau pathology in individuals across the Alzheimer’s disease spectrum are insufficiently understood. Longitudinal data are necessary to reveal which factors relate to preserved cognition (i.e. cognitive resilience) and brain structure (i.e. brain resilience) despite abundant tau pathology, and to clarify whether these associations are cross-sectional or longitudinal. We used a longitudinal study design to investigate the role of several demographic, biological and brain structural factors in yielding cognitive and brain resilience to tau pathology as measured with PET. In this multicentre study, we included 366 amyloid-β-positive individuals with mild cognitive impairment or Alzheimer’s disease dementia with baseline 18 F-flortaucipir-PET and longitudinal cognitive assessments. A subset (n = 200) additionally underwent longitudinal structural MRI. We used linear mixed-effects models with global cognition and cortical thickness as dependent variables to investigate determinants of cognitive resilience and brain resilience, respectively. Models assessed whether age, sex, years of education, APOE-ε4 status, intracranial volume (and cortical thickness for cognitive resilience models) modified the association of tau pathology with cognitive decline or cortical thinning. We found that the association between higher baseline tau-PET levels (quantified in a temporal meta-region of interest) and rate of cognitive decline (measured with repeated Mini-Mental State Examination) was adversely modified by older age (Stβ interaction = -0.062, P = 0.032), higher education level (Stβ interaction = -0.072, P = 0.011) and higher intracranial volume (Stβ interaction = -0.07, P = 0.016). Younger age, higher education and greater cortical thickness were associated with better cognitive performance at baseline. Greater cortical thickness was furthermore associated with slower cognitive decline independent of tau burden. Higher education also modified the negative impact of tau-PET on cortical thinning, while older age was associated with higher baseline cortical thickness and slower rate of cortical thinning independent of tau. Our analyses revealed no (cross-sectional or longitudinal) associations for sex and APOE-ε4 status on cognition and cortical thickness. In this longitudinal study of clinically impaired individuals with underlying Alzheimer’s disease neuropathological changes, we identified education as the most robust determinant of both cognitive and brain resilience against tau pathology. The observed interaction with tau burden on cognitive decline suggests that education may be protective against cognitive decline and brain atrophy at lower levels of tau pathology, with a potential depletion of resilience resources with advancing pathology. Finally, we did not find major contributions of sex to brain nor cognitive resilience, suggesting that previous links between sex and resilience might be mainly driven by cross-sectional differences.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2015

The separation of lanthanides and actinides in supercritical fluid carbon dioxide

Supercritical fluid carbon dioxide presents an attractive alternative to conventional solvents for recovery of the actinides and lanthanides. Carbon dioxide is a good solvent for fluorine and phosphate-containing ligands, including the traditional tributylphosphate ligand used in process-scale uranium separations. Actinide and lanthanide oxides may even be directly dissolved in carbon dioxide containing the complexes formed between these ligands and mineral acids, obviating the need for large volumes of acids for leaching and dissolution, and the corresponding organic liquid–liquid solvent extraction solutions. As a result, examples of the application of this novel technology for actinide and lanthanide separations are presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Electrochemical, thermodynamic, and physical properties of tetradecyltrihexylphosphonium ([P 6,6, 6,14 ] + ) and methyl-propyl piperidinium containing ionic liquids and their propylene carbonate solutions

Here, the viscosity, conductivity, electrochemical window and related thermodynamic properties such as excess volume and dynamic viscosity deviation of two phosphonium ionic liquids were measured and calculated for “as-supplied” and dried neat liquids and also v/v mixtures of 99/1, 95/5, 90/10, 75/25, and 50/50 of the ionic liquids with propylene carbonate (PC). Tetradecyltrihexylphosphonium dicyanamide ([P 6,6,6,14 ] + dicyanamide), Cyphos 105, and tetradecyltrihexylphosphonium bis(trifluororomethanesulfonyl)imide (called bistriflimide) ([P 6,6,6,14 ] + bistriflimide), Cyphos 109, ionic liquids were studied. Generally speaking, there were slight differences in the measured properties of the wet and dried IL solutions which were reflected in differences if the calculated properties. The measured and calculated properties were compared with those collected and derived from a piperidinium-based ionic liquid, methyl-propyl piperidinium bistriflimide. Arrhenius plots for both the viscosity and conductivity were linear, with the linearity of the Litovitz plots being slightly higher. The viscosity and conductivity of the phosphonium solutions yielded Walden Plots that differed from Walden plots of piperidinium solutions and other ionic liquid solutions. For the phosphonium based ionic liquids, the ionicity was found to increase with increasing dilution in propylene carbonate. The electrochemical windows of the ionic liquids were determined as a function of the concentration of the ionic liquid present in the solution. The size of the window generally initially decreased and then increased with the addition of PC for the [P 6,6,6,14 ] + dicyanamide ionic liquid increasing from 3.4 V in the 95/5 v/v (volume Cyphos 105) to volume of PC solvent) to 3.7 in the 50/50 dried IL case. The electrochemical windows of the dried liquids were slightly larger 3.5 V for the 95/5 v/v and 4.2 V for the 50/50 v/v Cyphos 105/PC solutions. The electrochemical window was larger and the conductivity was higher for the piperidinium IL solutions, but since the ionicity increases with dilution, the phosphonium based IL solutions may prove favorable for processes such as electrochemical reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Kinetic Model for the Radical Degradation of Tri-Halonitromethane Disinfection Byproducts in Water

The halonitromethanes (HNMs) are byproducts of the ozonation and chlorine/chloramine treatment of drinking waters. Although typically occurring at low concentrations HNMs have high cytotoxicity and mutagenicity, and may therefore represent a significant human health hazard. In this study, we have investigated the radical based mineralization of fully-halogenated HNMs in water using the congeners bromodichloronitromethane and chlorodibromonitromethane. We have combined absolute reaction rate constants for their reactions with the hydroxyl radical and the hydrated electron as measured by electron pulse radiolysis and analytical measurements of stable product concentrations obtained by 60Co steady-state radiolysis with a kinetic computer model that includes water radiolysis reactions and halide/nitrogen oxide radical chemistry to fully elucidate the reaction pathways of these HNMs. These results are compared to our previous similar study of the fully chlorinated HNM chloropicrin. The full optimized computer model, suitable for predicting the behavior of this class of compounds in irradiated drinking water is provided.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Electrodialysis: An effective methodology to purify the leachate of spent Li-ion batteries

The electrification of transportation and the transition of society towards low or net-zero carbon emissions has led to a skyrocketing global demand for Li-ion batteries. After a service life of three to ten years, Li-ion batteries have less than 80 % of their initial capacities and draw near to the end of their lives for practical utilization. Due to potential supply chain shortages and the value embodied in Li-ion batteries, it is imperative to recycle them, to recover the materials, and to improve the circularity and the sustinability of the industry. How to cost-effectively purify spent batteries while reducing time, energy, and waste emissions is a challenge faced by Li-ion battery recyclers. The first electrochemical membrane reactor reported in our group hasa high selectivity towards lower Cu 2+ , Al 3+ and Fe 3+ ions (<5 ppm) and retains >95% of the Ni 2+ , Co 2+ and Mn 2+ ions in the leachate. An advanced electrochemical membrane reactor was developed in this study. Further, not only does the new reactor have the same selectivity as the original reactor, but other advantages including a faster leachate processing rate (up to 10X faster). The advanced reactor can also directly generate acid at the anode side; eliminating the reactor restoration step. The prominent advantages that this electrodialysis technology has over chemical-precipitation methods include: (1) ion recovery efficiencies do not diminish after removing the impurities, Ni 2+ , Co 2+ and Mn 2+ , even at a higher initial Ni 2+ ion concentrations; in comparison, chemical precipitation has Ni 2+ , Co 2+ and Mn 2+ ion recovery efficiencies reduced significantly when the initial Ni 2+ , Co 2+ and Mn 2+ ion concentrations increase. (2) electrodialysis does not change the concentrations of Ni 2+ , Co 2+ and Mn 2+ ions significantly, but chemical precipitation could reduce Ni 2+ and Co 2+ ions to less than half of their initial values. Through electro-dialyzing the leachate, the H 2 evolution reaction mechanism was found to switch from the Volmer-acid Heyrovsky mechanism to the Volmer-alkaline Heyrovsky mechanism at a pH of around 3.7.

25 ENERGY STORAGE↗
DOE OSTI2022

Molten salt electrolysis and room temperature ionic liquid electrochemical processes for refining rare earth metals: Environmental and economic performance comparison

Circularizing end of life products such as electronic waste can open a new source for rare earth elements (REEs) that will decrease the demand pressure on conventional virgin production. The last step to produce REEs consists of a refining process to convert rare earth oxide (REO) to REE metal. One promising technology is processing REO via a room temperature ionic liquid, which is characterized by low energy requirements in contrast to existing REEs extraction processes. In this work, life cycle and techno-economic assessments are performed and compared against molten salt electrolysis. Here, the results show that both processes have advantages and disadvantages in terms of environmental performance, and that they are similarly competitive in terms of economic performance. A breakeven analysis suggests that future research should focus on coupling the production of REOs with the refining processes to attempt to lower REO cost and make them economically feasible in the U.S.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Rare earth element extraction from pretreated bastnäsite in supercritical carbon dioxide

Rare earth elements are a critical component in many clean energy technologies. Extraction of individual rare earth elements from natural ores or recycled material is challenging due to the very similar chemical properties across the lanthanide series. Supercritical carbon dioxide has emerged in recent years as a possible extraction medium for rare earth elements, due to its tunability and selectivity as a solvent. In this study, rare earth elements were recovered from bastnäsite concentrate using supercritical carbon dioxide extraction with nitric acid/tributyl phosphate adducts. Two bastnäsite pretreatment methods were used to render the rare earth elements amenable to recovery: 1) dry roasting of the source material at 730 °C for 3 hours, and 2) decomposition with 50% sodium hydroxide solution at 150 °C for 4 hours. These pretreated powder samples were extracted in supercritical carbon dioxide at 34 MPa and 65 °C, with kinetic samples obtained at 15-30 minute intervals. A range of tributyl phosphate/nitric acid adduct compositions (from 2 mol/L H + to 6 mol/L H + ) were used in order to determine the effect of adduct composition on recovery rate. The results showed the fastest extraction with an adduct containing approximately 4 M HNO 3 . Adducts with higher acidity showed reduced extraction of cerium, praseodymium, and neodymium. This could be due to the formation of aqueous droplets which dissolve rare earth elements and create an equilibrium limitation, or due to competition between the rare earth nitrates and nitric acid for coordination with tributyl phosphate. Extraction with various adduct concentrations in supercritical CO 2 showed the expected increase in reaction rate with increased adduct concentration. For the 4 mol/L H + adduct at 5.0 mol% adduct concentration, roasted bastnäsite recoveries were 72% for La, 96% for Ce, 88% for Pr, and 90% for Nd after 120 minutes. For 4 mol/L H + adduct at 5.1 mol% adduct concentration, NaOH digested bastnäsite recoveries were 93% for La, 100% for Ce, 99% for Pr, and 101% for Nd after 90 minutes. In conclusion, though further research is needed, these results are a key step in demonstrating applicability of supercritical extraction to rare earth element ores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Diamonds in the Rough: Direct Surface Enhanced Infrared Spectroscopic Evidence of Nitrogen Reduction on Boron-Doped Diamond Supported Metal Catalysts

In situ investigations of electrocatalytic processes of increasing societal interest such as the nitrogen reduction reaction (NRR) re-quire aggressive experimental conditions that are not readily compatible with surface sensitive techniques such as attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR-SEIRAS). A method for performing ATR-SEIRAS studies at very negative potentials where conventional IR-active films delaminate, and fail is reported. The method relies on a thin film of very robust boron-doped diamond deposited on a micromachined Si wafer, which provides extended mid-IR transparency at long wavelengths. SEIRAS activity is achieved by electrodepositing gold nanoparticles onto the conductive BDD layer. The Au@BDD layers are shown to sustain prolonged periods of electrolysis at negative potentials with no degradation of the modifying layer. The efficacy of these substrates for electrocatalysis is demonstrated by studying the reduction of N 2 at -1.5 V vs Ag/AgCl in an aqueous-based electrolyte. So under these conditions, direct spectroscopic evidence of both NH 3 and hydrazine formed from the nitrogen reduction reaction (NRR) is provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Extraction of rare earth oxides using supercritical carbon dioxide modified with Tri- n -butyl phosphate–nitric acid adducts

A new tri- n -butylphosphate–nitric acid (TBP–HNO 3 ) adduct was prepared by combining TBP and fuming (90%) HNO 3 . The adduct was characterized, and its phase-equilibrium behavior in supercritical carbon dioxide is reported. Supercritical carbon dioxide (sc-CO 2 ) was modified with this new adduct [TBP(HNO 3 ) 5.2 (H 2 O) 1.7 ], and the extraction efficacies of selected rare earth oxides (Y, Ce, Eu, Tb, and Dy) at 338 K and 34.5 MPa were compared with those obtained using an adduct formed from concentrated (70%) HNO 3 and TBP [TBP(HNO 3 ) 1.7 (H 2 O) 0.6 ]. All rare earth oxides tested with both adduct species could be extracted with the exception of cerium oxide. Furthermore, the water and acid concentrations in the different adducts were found to play a significant role in rare earth oxide extraction efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

High-Pressure Vapor-Liquid Equilibria of 1-Alkyl-1-Methylpyrrolidinium Bis(trifluoromethylsulfonyl)imide Ionic Liquids and CO 2

The high-pressure vapor-liquid equilibrium for the binary systems of carbon dioxide (CO 2 ) and a series of 1-alkyl-1-methyl pyrrolidinium bis(trifluoromethylsulfonyl)amide ionic liquids ([C n C 1 pyr][NTf 2 ] ( n = 3,4,6)) are reported at 298.15, 318.15 and 338.15 K and at pressures up to 20 MPa. Experiments were conducted using gravimetric (IGA and XEMIS microbalances) and a volumetric method (high-pressure view cell). The solubility of CO 2 in pyrrolidinium ionic liquids increases with decreasing temperature and increasing pressure. The CO 2 solubility also slightly increases with increase in alkyl chain length on the pyrrolidinium cation. Molar volume and volume expansion of CO 2 + IL mixtures are also reported. The Fickian diffusion of CO 2 in pyrrolidinium based ionic liquids (~10 -10 m 2 ·s -1 ) was calculated at pressures of up to 2 MPa and found to be at the same order of magnitude but slightly lower than the diffusivity of CO 2 in imidazolium based ionic liquid with the [NTf 2 ] anion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Viscosity of 1-Alkyl-1-methylpyrrolidinium Bis(trifluoromethylsulfonyl)imide Ionic Liquids Saturated with Compressed CO 2

The viscosity of mixtures of pyrrolidinium-based ionic liquids saturated with compressed CO 2 was measured using a high-pressure viscometer at three different temperatures (298.15, 318.15 and 338.15 K). The high-pressure viscosity of 1-propyl-1-methyl-pyrrolidinium ([C 3 C 1 pyr]), 1-butyl-1-methyl-pyrrolidinium ([C 4 C 1 pyr]), and 1-hexyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl)amide ([C 6 C 1 pyr]) cations with common anion, bis(trifluoromethylsulfonyl)amide ([NTf 2 ]), was measured up to a maximum CO 2 pressure of 25 MPa. In the temperature range investigated, the viscosity of the ionic liquid/ CO 2 mixture dramatically decreases with increasing of CO 2 pressure up to approximately 7 MPa but the viscosity decrease becomes less significant at higher CO 2 pressures (from 7 to 25 MPa) because the CO 2 composition in ILs slightly increases with pressure. At lower CO 2 pressures (compositions), temperature has a higher impact on the CO 2 solubility in IL, thus the viscosity drops significantly for lower temperatures (e.g. 298.15 K). The effect of alkyl chain length of the cation on the viscosity of ionic liquid/ CO 2 mixture was also measured. Though the pure [C n C 1 pyr][NTf 2 ] viscosity increases significantly with the increasing alkyl chain length of the cation, the viscosity of every ionic liquid/ CO 2 mixture tested herein become quite similar at higher CO 2 pressures, for a fixed temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

RTx-303, an Orally Bioavailable Polθ Polymerase Inhibitor That Potentiates PARP Inhibitors in BRCA Mutant Tumors

Abstract DNA polymerase θ (Polθ) is a polymerase-helicase fusion protein that is synthetically lethal with homologous recombination (HR) factors, such as BRCA1/2, and confers resistance to PARP inhibitors (PARPi) and other genotoxic cancer therapies. Previously developed Polθ polymerase (Polθ-pol) inhibitors (Polθi) exhibited limited pharmacological activity and metabolic stability, warranting the development of a Polθi with improved drug-like properties. Here, we developed RTx-303, a selective allosteric small-molecule Polθ-pol inhibitor that exhibits 5.1 nM IC50, 88% oral bioavailability, and a prolonged half-life along with its equipotent metabolite. X-ray crystallography highlights the development of a solvent-exposed side-chain that is essential for the optimal drug-like properties of RTx-303. Notably, RTx-303 exhibits significantly higher cellular potency than previously developed Polθ-pol inhibitors and strongly potentiates PARPi in BRCA1/2 mutant cells and patient-derived xenograft models. The superior potency, robust pharmacological activity, and high tolerability of RTx-303 warrant further development as a Polθ-pol inhibitor drug candidate.

Chandramouly, Gurushankar [Thomas Jefferson Univer↗
DOE OSTI2024

Nano-Plasticity of an Electrified Ionic Liquid/Electrode Interface: Uncovering Hard–Soft Structuring via Controlled Metal Fill Factor

Here, ionic liquids (ILs) nanostructuring at electrified interfaces is of both fundamental and practical interest as these materials are increasingly gaining prominence in energy storage and conversion processes. However, much remains unresolved about IL potential-controlled (re)organization under highly polarized interfaces, mostly due to the difficulty of selectively probing both the distal and proximal surface layers of adsorbed ions. In this work, the structural dynamics of the innermost layer (<10 nm from the surface) were independently interrogated from that of the ionic layers in the sub-surface region (>100 nm from the surface), using an infrared (IR) spectroscopy approach. By tuning the metal fill factor of gold films deposited on conductive metal oxide-modified IR internal reflection elements, the charge-driven (re)structuring of the inner and distal layers of 1-butyl-1-methylpyrrolidinium trifluoromethanesulfonate is unveiled. Within a relatively wide potential region (~±1 V) bounding the potential of zero charges, the ionic liquid is shown to undergo a reversible (i.e., soft) reorganization whereby the innermost layer of anions (cations) is exchanged by a layer of cations (anions). Kinetically unhindered changes in the number density of constituent cations and anions largely follow electrostatic expectations in the subsurface region, whereas the innermost layer exhibits a pronounced hysteresis and very slow relaxation. Under larger negative potential bias, IL restructuring is characterized by a highly irreversible (i.e., hard) and intense interfacial densification of the BMPy + cations, consistent with the formation of nanoscale segregated liquids. The outcomes of this work reveal a plastic IL nanostructuring under a strong electric field.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Water Interplays during Dysprosium Electrodeposition in Pyrrolidinium Ionic Liquid: Deconvoluting the Pros and Cons for Rare Earth Metallization

The electrochemical production of rare earth metals (REMs) in ionic liquids (ILs) has received much attention as a promising, sustainable and replacement to the molten salt electrolysis. Water additives have been recently suggested as a strategy to overcome the limitations of the ionic liquid process, but without complete assessment of its overall viability for the REMs production. In this regard, a full investigation of water impact on dysprosium (Dy) electrodeposition in pyrrolidinium triflate (BMPyOTf) ionic liquid was carried out. Water introduction was revealed to involve an interplay of implications on the electrodeposition process, including coordination, speciation, reduction pathways, interfacial dynamics, nucleation and metal stability and purity. In highly dry conditions, the reduction occurs at very negative potentials (-3.3V) in a consecutive pathway, resulting in negligible metal electrodeposition (low rate and efficiency) at the electrode surface. Initial water introduction (<30% molar fraction) leads to partitioning of the Dy complex between water and IL coordinated speciation, giving rise to an additional wave at more positive potentials (-2.4V). Probing and quantification of the heterogeneous Dy speciation by spectroscopic analyses enabled the uncovering of the reduction mechanism and accurate evaluation of the mass transport properties. While lowering the reduction thermodynamics, water addition also improved the nucleation, deposition rate and faradaic efficiency. In spite of these benefits, stripping voltammetric analysis also indicated substantial chemical reactivity of the deposited Dy metal with water additives and/or electrolyte components, under extended timescales. Surface characterization of the obtained product confirmed limited Dy metal stability (mostly oxidized/fluorinated) and purity (~60%) in the studied system. Moreover, high water introduction (>30% molar fraction) was shown to trigger a fast hydrogen evolution reaction (HER), downgrading the robustness of system efficiency. We report the overall impact of water additives seems to engender both promoting and mitigating effects on the Dy electrodeposition process, making the case for more innovative strategies to be sought.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Characterization of Arsenic Contamination on Rust from Ton Containers

The speciation and spatial distribution of arsenic on rusted steel surfaces affects both measurement and removal approaches. The chemistry of arsenic residing in the rust of ton containers that held the chemical warfare agents bis(2-chloroethyl)sulfide (sulfur mustard) and 2-chlorovinyldichloroarsine (Lewisite) is of particular interest, because while the agents have been decontaminated, residual arsenic could pose a health or environmental risk. The chemistry and distribution of arsenic in rust samples was probed using imaging secondary ion mass spectrometry (SIMS), X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy, and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX). Arsenic in the +3 and or +5 oxidation state is homogeneously distributed at the very top-most layer of the rust samples, and is intimately associated with iron. Sputter depth profiling followed by SIMS and XPS shows As at a depth of several nm, in some cases in a reduced form. The SEM/EDX experiments show that As is present at a depth of several microns, but is inhomogeneously distributed; most locations contained oxidized As at concentrations of a few percent, however several locations showed very high As in a metallic form. These results indicate that the rust material must be removed if the steel containers are to be cleared of arsenic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗