Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADAR RECEIVER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

The use of radar at non-attenuating wavelengths as a tool for the estimation of rain attenuation at frequencies above 10 GHz

The paper describes radar techniques and modeling procedures for estimating slant path attenuation and site diversity performance. The estimation results of an ongoing experiment at Wallops Island, Virginia are examined. At this location a high resolution S-band radar (0.4 deg beamwidth) monitors the reflectivity at contiguous pulse volumes approximately colocated with an earth space-path along which the Comstar beacon signal at 28.56 GHz is received. Radar estimated levels of rain attenuation at 28.56 GHz are compared with directly measured values both on a case by case basis as well as statistically for summer and winter periods. Use is made of ground disdrometer measurements in the radar estimation scheme.

Goldhirsh, J.↗
DOE OSTI2026

A Proof for the Unbiased Nature of Range-Doppler Measurements in Coarse-Resolution Dechirp-on-Receive Feedback Synthetic Aperture Radar Navigation

In feedback synthetic aperture radar (SAR) navigation, observables extracted from SAR range-Doppler images correct position and velocity errors accumulated within an associated navigation system. Unlike most other sensors, which produce measurements without input from a navigation system, SARs require a prior estimate of the radar’s position and velocity to adjust the radar’s matched filter during range-Doppler image formation. Consequently, it is possible for position and velocity errors within a navigation system to manifest as additional errors (biases) in the range-Doppler measurement observables. Prior work has not tackled this possibility in the context of feedback SAR navigation with a dechirp-on-receive radar. This paper offers a proof demonstrating that range-Doppler observables extracted from coarse-resolution vertical SAR images formed with a dechirp-on-receive radar may be safely modeled as unbiased measurements of the radar’s true position and velocity despite the presence of moderate navigation errors.

dechirp-on-receive↗
NASA NTRS1996

Optimal Estimation of Rain-Rate Profiles from Single-Frequency Radar Echoes

The significant ambiguities inherent in the determination of a particular vertical rain intensity profile from a given time profile of radar echo powers measured by a downward-looking (spaceborne or airborne) radar at a single attenuating frequency are well documented. Indeed, one already knows that by appropriately varying the parameters of the reflectivity-rain rate (Z-R) and/or attenuation-rain rate (k- R) relationships one can produce several substantially different rain-rate profiles that would produce the same radar power profile. Imposing the additional constraint that the path-averaged rain rate be a given fixed number does reduce the ambiguities but falls far short of eliminating them. While formulas to generate all mutually ambiguous rain-rate profiles from a given profile of received radar reflectivities have already been derived, there remains to be produced a quantitative measure to assess how likely each of these profiles is, what the appropriate "average" profile should be, and what the "variance" of these multiple solutions is. To do this, one needs to spell out the stochastic constraints that can allow us to make sense of the words "average" and "variance" in a mathematically rigorous way. Such a quantitative approach would be particularly well suited for such systems as the planned precipitation radar of the Tropical Rainfall Measuring Mission (TRMM). Indeed, one would then be able to use the radar reflectivities measured by the TRMM radar to estimate the rain-rate profile that would most likely have produced the measurements, as well as the uncertainty in the estimated rain rates as a function of range. Such an optimal approach is described in this paper.

Haddad, Ziad S.↗
NASA NTRS1984

Sidelobe reduction of Barker codes, part 7.1C

Barker codes can be realized as simple digital preprocessors, or with the use of a delay line, can be realized as an analogue device. Assuming the process observed has an autocorrelation time that is long compared to the code length, a gain in signal to noise, G = N where N is the number of elements in the code, may be realized. Typically Barker codes are implemented by shifting the phase of the transmitted signal by 0 or 180 degrees according to the code pattern. A typical detection scheme is shown where the output of the radar receiver is delayed by an analogue delay line or a shift register. The signal in each element of the delay line or shift register is continuously multiplied by the code and all elements are summed. A principal disadvantage was the sidelobe response. In the case of MST or ST radar echoes where there is a dynamic range as large as 60 dB, these unwanted sidelobes cause an increase in the apparent width of atmospheric layers, or some narrow layer to appear at several altitudes. The sidelobes of a Barker code may be reduced by tapering the response of the decoder. Optimum tapers, are shown. It is found that the sidelobe response is greatly reduced with very little loss in G.

Green, J. L.↗
NASA NTRS1992

Optimal Estimation of Rain Rate Profiles from Single-Frequency Radar Echoes

The significant ambiguities inherent in the determination of a particular vertical rain intensity profile from a given time profile of radar echo powers measured by a downward-looking (spaceborne or airborne) radar at a single attenuating frequency are well-documented. Indeed, one already knows that by appropriately varying the parameters of the reflectivity-rain-rate (Z - R) and/or attenuation-rain-rate (k - R) relationships, one can produce several substantially different hypothetical rain rate profiles which would have the same radar power profile. Imposing the additional constraint that the path-averaged rain-rate be a given fixed number does reduce the ambiguities but falls far short of eliminating them. While we now know how to generate as many mutually ambiguous rain-rate profiles from a given profile of received radar reflectivities as we like, there remains to produce a quantitative measure to assess how likely each of these profiles is, what the appropriate 'average' profile should be, and what the 'variance' of these multiple solutions is. Of course, in order to do this, one needs to spell out the stochastic constraints that can allow us to make sense of the words 'average' and 'variance' in a mathematically rigorous way. Such a quantitative approach would be particularly well-suited for such systems as the proposed Precipitation Radar of the Tropical Rainfall Measuring Mission (TRMM). Indeed, one would then be able to use the radar reflectivities measured by the TRMM radar from one particular look in order to estimate the most likely rain-rate profile that would have produced the measurements, as well as the uncertainty in the estimated rain-rates as a function of range. Such an optimal approach is described in this paper.

deep space flight computer real-time advanced spac↗
NASA NTRS2017

Global navigation satellite system reflectometry (GNSS-R) algorithms for wetland observations

It is important to closely monitor the state of the world’s wetlands, as climate change and human encroachment in a rapid global urbanization trend threaten to cause large-scale wetland collapse. Because wetlands are often difficult to observe in situ, remote sensing is the only viable way to map wetland extent globally. However, current remote sensing methods suffer limitations in capturing wetland extent, and more importantly, wetland dynamics at appropriate spatial and temporal scales. GNSSReflectometry could help fill the current observation gap, as experimental data show that ground-reflected GNSS signals are very sensitive to changes in inundated areas. Furthermore, because this technique only requires a custom developed receiver and antenna system, a constellation of such instruments can potentially be launched at relatively low cost, providing global observations at sub-daily intervals. One challenge remains, however, which is quantitatively formulating the geophysical product of reflections over the land surface in various states of inundation. Here, we use a novel reflection dataset, derived from the SMAP radar receiver, to elucidate the sensitivity of reflections to small land surface features and their seasonal variations. Additionally, we quantify the dynamic range of reflections over both open and closed wetlands, and suggest an algorithm for wetland type classification.

UNKNOWN↗
NASA NTRS1993

Calibration Results for J-ERS-1 SAR Data Produced by the Alaska SAR Facility

The Alaska SAR Facility has been receiving and processing SAR data from the J-ERS-1 satellite since Spring 1992. Corner reflectors have been set up for J-ERS-1 SAR calibration at a site near Delta Junction, in central Alaska. Image quality and calibration analysis results from the Delta Junction site and others will be presented in this paper. The impact of the 3-bit Analog-to-Digital Converter and the automatic stepping of the gain as a function of range in the J-ERS-1 radar receiver on calibration performance has been assessed. Preliminary observations on J-ERS-1 SAR data are that the average Signal-to-Noise ratio is generally fairly low, in the range 5-6dB. Azimuth ambiguity levels are higher than preflight analysis indicated. Over land, the dynamic range in the backscatter at L-band for approximately 36 degree incidence angle is often fairly high.

Freeman, A.↗
NASA NTRS1993

Calibration Results for J-ERS-1 SAR Data Produced by the Alaska SAR Facility

The Alaska SAR Facility has been receiving and processing SAR data from the J-ERS-1 satellite since Spring 1992. Corner reflectors have been set up for J-ERS-1 SAR calibration at a site near Delta Junction, in central Alaska. Image quality and calibration analysis results from the Delta Junction site and others will be presented in this paper. The impact of the 3-bit Analog-to-Digital Converter and the automatic stepping of the gain as a function of range in the J-ERS-1 radar receiver on calibration performance has been assessed. Preliminary observations on J-ERS-1 SAR data are that the average Signal-to-Noise ratio is generally fairly low, in the range 5-6 dB. Azimuth ambiguity levels are higher than preflight analysis indicated. Over land, the dynamic range in the backscatter at L-band for approximately 36 degree incidence angle is often fairly high...

Freeman, A.↗
NASA NTRS1989

Doppler radar with multiphase modulation of transmitted and reflected signal

A microwave radar signal is generated and split by a circulator. A phase shifter introduces a series of phase shifts into a first part of the split signal which is then transmitted by antenna. A like number of phase shifts is introduced by the phase shifter into the return signal from the target. The circulator delivers the phase shifted return signal and the leakage signal from the circulator to a mixer which generates an IF signal output at the Doppler frequency. The IF signal is amplified, filtered, counted per unit of time, and the result displayed to provide indications of target sense and range rate. An oscillator controls rate of phase shift in the transmitted and received radar signals and provides a time base for the counter. The phase shift magnitude increases may be continuous and linear or discrete functions of time.

Shores, Paul W.↗
NASA NTRS1971

Altimeter and radiometer for a Venus orbiter mission

The concept, constraints, and capabilities of a radar altimeter type contour mapper for a Venus orbiter mission are presented. The system was developed for the proposed planetary explorer universal bus concept. A system with a height precision of 30meters over a surface area of 7200 square kilometers is achieved. Using this system and the orbit proposed in the orbiting bus concept, the northern hemisphere of Venus is mapped in one Venus day. The radar receiver system, is used in a radiometer mode to obtain a map of the diurnal and logitudinal variations of the Venus surface temperature with a resolution of 3.0 degrees Kelvin.

Bryan, J. W.↗
NASA NTRS1978

Differences in radar return from ice-covered North Slope Lakes

Comparisons are made between L and X band synthetic aperture radar images of frozen lakes on the North Slope of Alaska and ground truth observations of the nature of their ice covers. It is shown that the differences in radar backscatter observed on different areas of a lake can be correlated with whether or not the lake is frozen completely to the bottom at the site in question. This explanation is reasonable inasmuch as the reflection coefficient associated with the high-dielectric contrast ice/water interface is significantly higher than that associated with a low-contrast ice/soil interface. However, the presence of the ice/water interface cannot be the only condition required for the higher backscatter because the ice/water interface per se would be specular at X and L band frequencies, causing the energy returned from the interface to be reflected away from the radar receiver. The other principal factor contributing to the return of energy from the ice/water interface to the receiver is believed to be the presence in the ice of numerous vertically elongated air bubbles which would act as scatters.

Weeks, W. F.↗
NASA NTRS1990

The Magellan Venus radar mapping mission

The NASA Magellan Venus Radar Mapper spacecraft, which will be placed into orbit around Venus on August 10, 1990, is described and its mission is discussed. The orbiter's 12-cm wavelength, multimode radar system is examined and the applications of its modes are addressed. In the SAR mode, it can image most of the Venus surface at a resolution of better than 300 m, approaching 120 m over more than half the planet. In the altimeter mode, the radar will determine topographic relief to a vertical accuracy of better than 50 m averaged over a surface resolution cell approximately 10 km in diameter. In the radiometer mode, the radar receiver can determine the surface radio emission brightness temperature with an absolute accuracy of 20 K, at a resolution of 2 K. The nature of the data products and the archiving plans are also considered.

Saunders, R. S.↗
NASA NTRS1968

Use of a Magnetic Azimuth-Indicator System Developed for Balloon Payloads of the Planetary Entry Parachute Program

An azimuth-sensing system was used for continuous ground monitoring of the azimuth orientation of the balloon-borne Planetary Entry Parachute Program (PEPP) spacecraft. The system utilized two magnetic field sensors located in the spacecraft so as to produce a unique set of voltage outputs for any azimuth. Electronics onboard the spacecraft encoded the magnetometer outputs and fed the encoded signal to a C-band modulator which imposed the intelligence onto the radar tracking beacon pulses. A conveniently located ground radar received the modulated pulses and the magnetometer outputs were reproduced after demodulation. For fast, direct readout, an X-Y plotter was calibrated to cross plot the reproduced signal of the two magnetometers on a combination rectangular-polar graph indicating the correct true azimuth in real time. The method was used successfully on three of the PEPP balloon-borne spacecraft to determine when the spacecraft was pointed in the most advantageous direction for release from the balloon, at 130,000 ft altitude. The use of such a system of azimuth monitoring is suitable to balloon payloads which are virtually stable with respect to the horizontal but may be rotating about the vertical axis. Angular accuracies within plus or minus 10 deg. could generally be expected.

Darnell, Wayne L.↗
NASA NTRS2005

A Feasibility Study for Simultaneous Measurements of Water Vapor and Precipitation Parameters using a Three-frequency Radar

The radar return powers from a three-frequency radar, with center frequency at 22.235 GHz and upper and lower frequencies chosen with equal water vapor absorption coefficients, can be used to estimate water vapor density and parameters of the precipitation. A linear combination of differential measurements between the center and lower frequencies on one hand and the upper and lower frequencies on the other provide an estimate of differential water vapor absorption. The coupling between the precipitation and water vapor estimates is generally weak but increases with bandwidth and the amount of non-Rayleigh scattering of the hydrometeors. The coupling leads to biases in the estimates of water vapor absorption that are related primarily to the phase state and the median mass diameter of the hydrometeors. For a down-looking radar, path-averaged estimates of water vapor absorption are possible under rain-free as well as raining conditions by using the surface returns at the three frequencies. Simulations of the water vapor attenuation retrieval show that the largest source of error typically arises from the variance in the measured radar return powers. Although the error can be mitigated by a combination of a high pulse repetition frequency, pulse compression, and averaging in range and time, the radar receiver must be stable over the averaging period. For fractional bandwidths of 20% or less, the potential exists for simultaneous measurements at the three frequencies with a single antenna and transceiver, thereby significantly reducing the cost and mass of the system.

Meneghini, R.↗
NASA NTRS2002

DSN and GAVRT observations of Jupiter at 13 GHz and the calibration of the Cassini radar instrument for passive radiometry

One objective of the Cassini-Jupiter Microwave Observing Campaign observations was to measure Jupiter's average disk temperature with high accuracy at 13.78 GHz, which is the frequency of the radar receiver on the spacecraft. Preliminary results of the ground-based observations are reported. A second objective of the Cassini-JMOC project included an educational compment that allowed middle- and high school students to participate directly in the ground-based observations and data analysis.

radio astronomy Jupiter radio emission Cassini pas↗