Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RACEE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Incorporating general race and housing flexibility and deadband in rolling element bearing analysis

Methods for including the effects of general race and housing compliance and outer race-to-housing deadband (clearance) in rolling element bearing mechanics analysis is presented. It is shown that these effects can cause significant changes in bearing stiffness characteristics, which are of major importance in rotordynamic response of turbomachinery and other rotating systems. Preloading analysis is demonstrated with the finite element/contact mechanics hybrid method applied to a 45 mm angular contact ball bearing.

Davis, R. R.↗
NASA NTRS2003

RACE and Calculations of Three-dimensional Distributed Cavity Phase Shifts

The design for RACE, a Rb-clock flight experiment for the ISS, is described. The cold collision shift and multiple launching (juggling) have important implications for the design and the resulting clock accuracy and stability. We present and discuss the double clock design for RACE. This design reduces the noise contributions of the local oscillator and simplifies and enhances an accuracy evaluation of the clock. As we try to push beyond the current accuracies of clocks, new systematic errors become important. The best fountain clocks are using cylindrical TE(sub 011) microwave cavities. We recently pointed out that many atoms pass through a node of the standing wave microwave field in these cavities. Previous studies have shown potentially large frequency shifts for atoms passing through nodes in a TE(sub 013) cavity. The shift occurs because there is a small traveling wave component due to the absorption of the copper cavity walls. The small traveling wave component leads to position dependent phase shifts. To study these effects, we perform Finite Element calculations. Three-dimensional Finite Element calculations require significant computer resources. Here we show that the cylindrical boundary condition can be Fourier decomposed to a short series of two-dimensional problems. This dramatically reduces the time and memory required and we obtain (3D) phase distributions for a variety of cavities. With these results, we will be able to analyze this frequency shift in fountain and future space clocks.

Li, Ruoxin↗
NASA NTRS2005

Mutual Influences: U.S.S.R. - U.S. Interactions During the Space Race

This paper presents a broad historical view of the space race and its relationship between the Soviet Union and the United States in the early years of the space race. The author also adds some thoughts on the writing of history and how we evaluate space history.

Siddiqi, Asif↗
NASA NTRS2010

Discontinuous Inter-Granular Separations (DIGS) in the Gas Nitride Layer of ISS Race Rings

The starboard solar alpha rotary joint (SARJ) race ring on the International space station (ISS) failed due to severe spalling of the outer diameter, 45 degree (outer canted) nitrided surface. Subsequent analysis at NASA-KSC revealed that almost all of the debris generated due to the failure was nitrided 15-5 stainless steel. Subsequent analysis of the nitride control coupons (NCC) at NASA-JSC revealed the presence of discontinuous inter-granular separations (DIGS) in the gas nitride layer. These DIGS were present in the inter-granular networking located in the top 2 mils of the nitride layer. The manufacturer's specification requires the maximum white structure to be 0.0003 inches and intergranular networking below the allowable white structure depth to be cause for rejection; a requirement that the NCCs did not meet. Subsequent testing and analysis revealed that lower DIGS content significantly lowered the probability of nitride spalling in simulated, dry condition runs. One batch of nitride samples with DIGS content similar to the port SARJ (did not fail on orbit) which exhibited almost no nitride spalling after being run on one test rig. Another batch of nitride samples with DIGS content levels similar to the starboard SARJ exhibited significant nitride spalling on the same test rig with the same load under dry conditions. Although DIGS were not the root cause of starboard race ring failure, testing indicates that increased DIGS reduced the robustness of the gas nitride layer under dry operating conditions.

Figert, John↗
NASA NTRS1968

Hazards in noncritical races.

Hazards in noncritical races, discussing minimum transition time coding of asynchronous sequential switching circuits

Collins, D. C.↗
NASA NTRS1972

Analysis of an arched outer-race ball bearing considering centrifugal forces

A Newton-Raphson method of iteration was used in evaluating the radial and axial projection of the distance between the ball center and the outer raceway groove curvature center (V and W). Fatigue life evaluations were made. The similar analysis of a conventional bearing can be directly obtained from the arched bearing analysis by simply letting the amount of arching be zero (g = 0) and not considering equations related to the unloaded half of the outer race. The analysis was applied to a 150-mm angular contact ball bearing. Results for life, contact loads, and angles are shown for a conventional bearing (g = 0) and two arched bearings (g = 0.127 mm (0.005 in.), and 0.254 mm (0.010 in.)). The results indicate that an arched bearing is highly desirable for high speed applications. In particular, for a DN value of 3 million (20,000 rpm) and an applied axial load of 4448 N (1000 lb), an arched bearing shows an improvement in life of 306 percent over that of a conventional bearing. At 4.2 million DN (28,000 rpm), the corresponding improvement is 340 percent. It was also found for low speeds, the arched bearing does not offer the advantages that it does for high speed applications.

Hamrock, B. J.↗
NASA NTRS1972

Magnetic perturbation inspection of inner bearing races

Approximately 100 inner race bearings were inspected nondestructively prior to endurance testing. Two of the bearings which failed during testing spalled at the sites of subsurface inclusions previously detected by using magnetic field perturbation. At other sites initially judged to be suspect, subsurface inclusion-nucleated cracking was observed. Inspection records and metallurgical sectioning results are presented and discussed.

Barton, J. R.↗
NASA NTRS1990

Vibrations Caused By Cracked Turbopump Bearing Race

Expansion gives rise to eccentricity. Report presents analysis of dynamic effects caused by cracking of inner race of ball bearing in turbopump. Crack manifested itself via increase in vibrations synchronous with rotation and smaller increase at twice frequency of rotation. Analysis conducted to verify these increases were caused solely by crack and to understand implications for future such cracks.

Goggin, David G.↗
NASA NTRS1991

Grease Inhibits Stress-Corrosion Cracking In Bearing Race

Coating with suitable grease found to inhibit stress-corrosion cracking in bore of inner race of ball-bearing assembly operating in liquid oxygen. Protects bore and its corner radii from corrosion-initiating and -accelerating substances like moisture and contaminants, which enter during assembly. Operating life extended at low cost, and involves very little extra assembly time.

Beatty, Robert F.↗
NASA NTRS1991

Gradient Tempering Of Bearing Races

Gradient-tempering process increases fracture toughness and resistance to stress-corrosion cracking of ball-bearing races made of hard, strong steels and subject to high installation stresses and operation in corrosive media. Also used in other applications in which local toughening of high-strength/low-toughness materials required.

Parr, Richardson A.↗
NASA NTRS1993

Radial Splines Would Prevent Rotation Of Bearing Race

Interlocking fine-pitch ribs and grooves formed on otherwise flat mating end faces of housing and outer race of rolling-element bearing to be mounted in housing, according to proposal. Splines bear large torque loads and impose minimal distortion on raceway.

Kaplan, Ronald M.↗
NASA NTRS1932

Some Ideas on Racing Seaplanes

This report presents the author's designs and construction of various seaplanes to raced in the Schneider Cup. The results of tests are presented as well as discussions of various structures like floats and wings.

Pegna, Giovanni↗
NASA NTRS1994

ASU Formula Lightning Race Vehicle Report Prepared for Ohio Aerospace Institute

This report describes the drive system in the Arizona State University Formula Lightning electric race car when it participated in the 1994 Cleveland Electric Formula Classic on 9 July 1994. In addition, the telemetry system used to monitor the car's performance and plans for improving the car's performance are described.

Sirkis, Murray D.↗
NASA NTRS2001

Next Space Race is in IT

The next Space Race will be in the economic applications from space and science technology. As NASA science and technology has global application; IT is global, economics is global; surely there are great untapped potentials in finding the IT links of commonality among these three. The Economics of IT will continue to depend upon solution providers creating new methods that capitalize on linking information and information centers with the applications community for business and economic functions.. New and innovative IT vendors whose increased efforts to apply evolving technologies and principles that power the e-business revolution are now seeing the business of government being transformed in a similar fashion. NASA will be a prime example of IT transformation. Potential benefits of e-government are identical to the benefits of e-commerce, which start from value derived from capabilities and assets. The capability and asset wealth of NASA technology and data mass scattered through hundreds of archives will one day provide incredible economic benefit across international and corporate boundaries. Yet the ability to economically benefit from bridging the gap between capability to billable service has yet to find it's first major market. Ultimately the role of government, science, and technology linking to the business world will find greater dependence from this increasingly common ground of IT solutions and technologies. Therefore the future role of the IT industry may be as much administrative as technical, ultimately of critical importance furthering the role of science into application.

Alger, George↗
NASA NTRS1992

Bike Racing Helmet

In 1985, the U.S. Cycling Federation ruled that all racing bikers must wear helmets that meet American National Safety Institute Standards. Existing helmets were hot and heavy. Jim Gentes, president of Giro Sport Design, Inc. turned to Raymond Hicks an aerodynamicist at Ames Research Center for a design for a cool, lightweight helmet. Hicks created an aerodynamic helmet shape using technology from a NACA airfoil section. Air vents make the air flow laminar and reduce drag. Since 1986, Giro helmets have evolved and expanded. One was worn by the 1989 Tour de France winner.

Source record↗