Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RACEE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Experimental performance of 75-millimeter-bore arched outer-race ball bearings to 2.1 million DN

An experimental investigation was performed to determine the operating characteristics of arched outer-race bearings and to compare the data with those for a similar, but conventional, deep-groove ball bearing. The bearings were tested over a range of shaft speeds up to 28,000 rpm at a thrust load of 2200 newtons (500 lb). One bearing was operated at 26,000 rpm with a range of thrust loads. The amounts of arching were 0.13, 0.25, and 0.51 millimeter (0.005, 0.010, and 0.020 in.). All bearings operated satisfactorily; the arched bearing outer-race temperatures and torques were consistently higher than those for the conventional bearing.

Coe, H. H.↗
NASA NTRS1976

Performance of 75 millimeter-bore arched outer-race ball bearings

An investigation was performed to determine the operating characteristics of 75-mm bore, arched outer-race bearings, and to compare the data with those for a similar, but conventional, deep groove ball bearing. Further, results of an analytical study, made using a computer program developed previously, were compared with the experimental data. Bearings were tested up to 28,000 rpm shaft speed with a load of 2200 N (500 lb). The amount of arching was 0.13, 0.25, and 0.51 mm (.005, .010, and .020 in.). All bearings operated satisfactorily. The outer-race temperatures and the torques, however, were consistently higher for the arched bearings than for the conventional bearing.

Coe, H. H.↗
NASA NTRS1976

Performance of 75-millimeter bore arched outer-race ball bearings

An investigation was performed to determine the operating characteristics of 75-mm bore, arched outer-race bearings, and to compare the data with those for a similar, but conventional, deep groove ball bearing. Further, results of an analytical study, made using a computer program developed previously, were compared with the experimental data. Bearings were tested up to 28,000 rpm shaft speed with a load of 2,200 N (500 lb). The amount of arching was 0.13, 0.25, and 0.51 mm (0.005, 0.010, and 0.020 in). All bearings operated satisfactorily. The outer-race temperatures and the torques, however, were consistently higher for the arched bearings than for the conventional bearings

Coe, H. H.↗
NASA NTRS1985

Effect of speed and press fit on fatigue life of roller-bearing inner-race contact

An analysis was performed to determine the effects of inner ring speed and press fit on the rolling element fatigue life of a roller bearing inner race contact. The effects of the resultant hoop and radial stresses on the principal stresses were considered. The maximum shear stresses below the Hertzian contact were determined for different conditions of inner ring speed, load, and geometry and were applied to a conventional ring life analysis. The race contact fatigue life was reduced by more than 90 percent for some conditions when speed and press fit were considered. The depth of the maximum shear stress remained virtually unchanged.

Coe, H. H.↗
NASA NTRS1989

Incorporating general race and housing flexibility and deadband in rolling element bearing analysis

Methods for including the effects of general race and housing compliance and outer race-to-housing deadband (clearance) in rolling element bearing mechanics analysis is presented. It is shown that these effects can cause significant changes in bearing stiffness characteristics, which are of major importance in rotordynamic response of turbomachinery and other rotating systems. Preloading analysis is demonstrated with the finite element/contact mechanics hybrid method applied to a 45 mm angular contact ball bearing.

Davis, R. R.↗
NASA NTRS2003

RACE and Calculations of Three-dimensional Distributed Cavity Phase Shifts

The design for RACE, a Rb-clock flight experiment for the ISS, is described. The cold collision shift and multiple launching (juggling) have important implications for the design and the resulting clock accuracy and stability. We present and discuss the double clock design for RACE. This design reduces the noise contributions of the local oscillator and simplifies and enhances an accuracy evaluation of the clock. As we try to push beyond the current accuracies of clocks, new systematic errors become important. The best fountain clocks are using cylindrical TE(sub 011) microwave cavities. We recently pointed out that many atoms pass through a node of the standing wave microwave field in these cavities. Previous studies have shown potentially large frequency shifts for atoms passing through nodes in a TE(sub 013) cavity. The shift occurs because there is a small traveling wave component due to the absorption of the copper cavity walls. The small traveling wave component leads to position dependent phase shifts. To study these effects, we perform Finite Element calculations. Three-dimensional Finite Element calculations require significant computer resources. Here we show that the cylindrical boundary condition can be Fourier decomposed to a short series of two-dimensional problems. This dramatically reduces the time and memory required and we obtain (3D) phase distributions for a variety of cavities. With these results, we will be able to analyze this frequency shift in fountain and future space clocks.

Li, Ruoxin↗
NASA NTRS2005

Mutual Influences: U.S.S.R. - U.S. Interactions During the Space Race

This paper presents a broad historical view of the space race and its relationship between the Soviet Union and the United States in the early years of the space race. The author also adds some thoughts on the writing of history and how we evaluate space history.

Siddiqi, Asif↗
NASA NTRS2010

Discontinuous Inter-Granular Separations (DIGS) in the Gas Nitride Layer of ISS Race Rings

The starboard solar alpha rotary joint (SARJ) race ring on the International space station (ISS) failed due to severe spalling of the outer diameter, 45 degree (outer canted) nitrided surface. Subsequent analysis at NASA-KSC revealed that almost all of the debris generated due to the failure was nitrided 15-5 stainless steel. Subsequent analysis of the nitride control coupons (NCC) at NASA-JSC revealed the presence of discontinuous inter-granular separations (DIGS) in the gas nitride layer. These DIGS were present in the inter-granular networking located in the top 2 mils of the nitride layer. The manufacturer's specification requires the maximum white structure to be 0.0003 inches and intergranular networking below the allowable white structure depth to be cause for rejection; a requirement that the NCCs did not meet. Subsequent testing and analysis revealed that lower DIGS content significantly lowered the probability of nitride spalling in simulated, dry condition runs. One batch of nitride samples with DIGS content similar to the port SARJ (did not fail on orbit) which exhibited almost no nitride spalling after being run on one test rig. Another batch of nitride samples with DIGS content levels similar to the starboard SARJ exhibited significant nitride spalling on the same test rig with the same load under dry conditions. Although DIGS were not the root cause of starboard race ring failure, testing indicates that increased DIGS reduced the robustness of the gas nitride layer under dry operating conditions.

Figert, John↗
DOE OSTI2022

Superconducting Shuttle-Flux Shift Register for Race Logic and Its Applications

Here this paper presents a superconducting, magnetically-coupled, shuttle-flux shift register (SF-SR) that stores single flux quantum (SFQ) pulses. This shift register has a DC bias operating margin of ±34% at 10 GHz, with a power dissipation of 3.6 μW and 38% fewer Josephson junctions (JJs) when scaled up to multiple stages compared to a data flip-flop (DFF) based shift register. The clock input is inductively coupled and is independent from the data input. We then present three applications for our SF-SR. In the first application, we add two non-destructive readout (NDRO) cells to construct a buffer that temporarily stores the temporal information of a series of race logic (RL) pulses. The second application is a pseudo-random number generator based on a linear function shift register (LFSR). The third application is N parallel SF-SRs that can act similar to a deserializer or instead can emulate a single SF-SR of N times higher clock frequency. These three applications motivate deep shift registers with many shifting intervals, which our SF-SR can implement with fewer JJs and lower power consumption compared to DFF-based shift registers.

42 ENGINEERING↗
DOE OSTI2021

Kiana RACEE Reductions Template v2

Energy savings data from Remote Alaska Communities Energy Efficiency (RACEE) competition

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Hidden delays of climate mitigation benefits in the race for electric vehicle deployment

Although battery electric vehicles (BEVs) are climate-friendly alternatives to internal combustion engine vehicles (ICEVs), an important but often ignored fact is that the climate mitigation benefits of BEVs are usually delayed. The manufacture of BEVs is more carbon-intensive than that of ICEVs, leaving a greenhouse gas (GHG) debt to be paid back in the future use phase. Here we analyze millions of vehicle data from the Chinese market and show that the GHG break-even time (GBET) of China’s BEVs ranges from zero (i.e., the production year) to over 11 years, with an average of 4.5 years. 8% of China’s BEVs produced and sold between 2016 and 2018 cannot pay back their GHG debt within the eight-year battery warranty. We suggest enhancing the share of BEVs reaching the GBET by promoting the effective substitution of BEVs for ICEVs instead of the single-minded pursuit of speeding up the BEV deployment race.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Single nucleotide variants drive evolutionary phage-host arms race in anaerobic carbon dioxide-converting microbiome

Microbial bioconversions are shaped by environmental perturbations and the adaptation of resident microbiomes. Prokaryotes coexist with bacteriophages, yet their coevolutionary trajectories remain underexplored. Here, we investigate the effects of a cultivation vessel leak on an anaerobic consortium performing carbon dioxide reduction. Using time-series shotgun metagenomic sequencing, we reconstruct microbial and viral genomes to track community shifts. We further apply single-nucleotide variant profiling and CRISPR array analysis to monitor viral microdiversity and host defense mechanisms. After bioaugmentation restores bioconversion efficiency, the consortium undergoes pronounced restructuring, with new dominant taxa emerging from the rare biosphere. We identify patterns consistent with phage predation selectively removing certain species, while others exhibit resilience to infection. This shift aligns with a widespread viral outbreak and a transient increased frequency of single nucleotide variants in bacterial CRISPR–Cas defense genes. Expansion of CRISPR spacers further supports that CRISPR-mediated processes influence microbial resilience. Concurrently, phages infecting resilient hosts exhibited adaptive evolution, marked by high genetic heterogeneity. Selective pressure varies across their genomes, targeting infectivity genes and protospacer-adjacent motifs. These findings highlight a dynamic evolutionary arms race driven by the selection of beneficial genetic variants, providing a mechanistic framework for multi-omics investigations, and informing biotechnological applications, including phage-based microbiome manipulation.

Ghiotto, G↗
DOE OSTI2022

Cervical Precancers and Cancers Attributed to HPV Types by Race and Ethnicity: Implications for Vaccination, Screening, and Management

Abstract Background Racial and ethnic variations in attribution of cervical precancer and cancer to human papillomavirus (HPV) types may result in different HPV vaccine protection, screening test coverage, and clinical management. Methods Pooling data from 7 US studies, we calculated the proportional attribution of precancers and cancers to HPV types using HPV DNA typing from diagnosis. All statistical tests were 2-sided. Results For all racial and ethnic groups, most cases of cervical intraepithelial neoplasia grade 3 (CIN3) (84.2%-90.8% of 5526) and squamous cell carcinoma (SCC) (90.4%-93.8% of 1138) were attributed to types targeted by the 9-valent vaccine. A higher proportion of CIN3s were attributed to nonvaccine HPV types among non-Hispanic Black women (15.8%) compared with non-Hispanic Asian or Pacific Islander (9.7%; P = .002), non-Hispanic White (9.2%; P < .001), and Hispanic (11.3%; P = .004) women. The proportion of SCCs attributed to 9-valent types was similar by race and ethnicity (P = .80). A higher proportion of CIN3s were attributed to nonvaccine HPV35 among non-Hispanic Black (9.0%) compared with non-Hispanic Asian or Pacific Islander (2.2%), non-Hispanic White (2.5%), and Hispanic (3.0%; all P < .001) women. Compared with CIN3, the proportion of SCCs attributed to HPV35 among non-Hispanic Black women (3.2%) was lower and closer to other groups (0.3%-2.1%; P = .70). Conclusion The 9-valent HPV vaccine will prevent nearly all cervical precancers and invasive cancers among major racial and ethnic groups in the United States. Adding HPV35 to vaccines could prevent a small percentage of CIN3s and SCCs, with greater potential impact for CIN3s among Black women. HPV screening tests target high-risk HPV types, including HPV35. Future genotyping triage strategies could consider the importance of HPV35- and other HPV16-related types.

Mix, Jacqueline (ORCID:0000000164187706)↗
DOE OSTI2022

Race conditions and data partitioning: risks posed by common errors to reproducible parallel simulations

When parallel algorithms for simulation were introduced in the 1970s, their development and use interested only experts in parallel computation. This circumstance changed as multi-core processors became commonplace, putting a parallel computer into the hands of every modeler. A natural outcome is growing interest in parallel simulation among persons not intimately familiar with parallel computing. At the same time, parallel simulation tools continue to be developed with the implicit assumption that the modeler is knowledgeable about parallel programming. The unintended consequence is a rapidly growing number of users of parallel simulation tools that are unlikely to recognize when the interaction of race conditions, partitioning strategies, and simultaneous action in their simulation models make results non-reproducible, thereby calling into question the validity of conclusions drawn from the simulation data. Here, we illustrate the potential dangers of exposing parallel algorithms to users who are not experts in parallel computation with example models constructed using existing parallel simulation tools. By doing so, we hope to refocus tool developers on usability, even if this new focus incurs loss of some performance.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Escalation in the host-pathogen arms race: A host resistance response corresponds to a heightened bacterial virulence response

The zig-zag model of host-pathogen interaction describes the relative strength of defense response across a spectrum of pathogen-induced plant phenotypes. A stronger defense response results in increased resistance. Here, we investigate the strength of pathogen virulence during disease and place these findings in the context of the zig-zag model. Xanthomonas vasicola pv. holcicola ( Xvh ) causes sorghum bacterial leaf streak. Despite being widespread, this disease has not been described in detail at the molecular level. We divided diverse sorghum genotypes into three groups based on disease symptoms: water-soaked lesions, red lesions, and resistance. Bacterial growth assays confirmed that these three phenotypes represent a range of resistance and susceptibility. To simultaneously reveal defense and virulence responses across the spectrum of disease phenotypes, we performed dual RNA-seq on Xvh -infected sorghum. Consistent with the zig-zag model, the expression of plant defense-related genes was strongest in the resistance interaction. Surprisingly, bacterial virulence genes related to the type III secretion system (T3SS) and type III effectors (T3Es) were also most highly expressed in the resistance interaction. This expression pattern was observed at multiple time points within the sorghum- Xvh pathosystem. Further, a similar expression pattern was observed in Arabidopsis infected with Pseudomonas syringae for effector-triggered immunity via AvrRps4 but not AvrRpt2. Specific metabolites were able to repress the Xvh virulence response in vitro and in planta suggesting a possible signaling mechanism. Taken together, these findings reveal multiple permutations of the continually evolving host-pathogen arms race from the perspective of host defense and pathogen virulence responses.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

RACEE: Community of Klawock Competition Project Summary

RACEE is a US Department of Energy (DOE) competition that challenged rural Alaskan communities to commit to saving 15% energy by 2020 (baseline 2010) which aligns with the State’s Energy Efficiency goal. In January 2016, 64 communities, including eight Southeast communities, submitted pledges to become energy champions and move to the next phase of the competition. In April, DOE announced that 13 communities would be eligible to apply for up to $3.4 million in funding to implement the community energy efficiency plans they develop in Phase II of the competition. Klawock is one of those 13 communities and the only eligible community in Southeast Alaska.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Race-Specific Risk Factors for Homeownership Disparity in the Continental United States

The United States has a racial homeownership gap due to a legacy of historic inequality and discriminatory policies, but factors that contribute to the racial disparity in homeownership rates between White Americans and people of color have not been fully characterized. In order to alleviate this issue, policymakers need a better understanding of how risk factors affect the homeownership rates of racial and ethnic groups differently. In this study, data from several publicly available surveys, including the American Community Survey and United States Census, were leveraged in combination with statistical learning models to investigate potential factors related to homeownership rates across racial and ethnic categories, with a focus on how risk factors vary by race or ethnicity. Our models indicated that job availability for specific demographics, and specific regions of the United States were factors that affect homeownership rates in Black, Hispanic, and Asian populations in different ways. Based on the results of this study, it is recommended policymakers promote strategies to increase access to jobs for people of color (POC), such as vocational training and programs to reduce implicit bias in hiring practices. These interventions could ultimately increase homeownership rates for POC and be a step toward reducing the racial wealth gap.

99 GENERAL AND MISCELLANEOUS↗