Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quantum measurements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Quantum efficiency measurements for several waveshifter coatings in the extreme vacuum ultraviolet

Quantum efficiency measurements are given for coronene and liumogen coatings designed to enhance UV sensitivity for silicon charge coupled device imaging detectors. Coatings on quartz and on UDT PIN 10DP photodiodes were tested. The wavelength range extended from 153.7 to 50.0 nm in the vacuum ultraviolet. Similar measurements were made for coronene, liumogen, and stilbene-3 laser dye films on quartz disks relative to sodium salicylate. Sodium salicylate and coronene are the most efficient waveshifters down to 50 nm so far observed. Coronene's fairly constant quantum efficiency over such a wide wavelength range into the far VUV makes it a useful waveshifter for UV and VUV applications.

Butner, C. L.↗
NASA NTRS1979

The challenge of detecting gravitational radiation is creating a new chapter in quantum electronics: Quantum nondemolition measurements

Future gravitational wave antennas will be approximately 100 kilogram cylinders, whose end-to-end vibrations must be measured so accurately (10 to the -19th power centimeters) that they behave quantum mechanically. Moreover, the vibration amplitude must be measured over and over again without perturbing it (quantum nondemolition measurement). This contrasts with quantum chemistry, quantum optics, or atomic, nuclear, and elementary particle physics where measurements are usually made on an ensemble of identical objects, and care is not given to whether any single object is perturbed or destroyed by the measurement. Electronic techniques required for quantum nondemolition measurements are described as well as the theory underlying them.

Braginsky, V. B.↗
NASA NTRS1990

Quantum efficiency measurements of Tektronix backside thinned CCDs

Results are presented of a program in progress to produce CCDs with high stable quantum efficiency (QE). Measurements made at 253.7 nm over a six-month period showed no significant QE difference between two CCDs manufactured in 1989 and one manufactured in 1988. QE improvement by the addition of a two-layer antireflection coating is about threefold at 400 nm.

Delamere, Alan↗
DOE OSTI2024

Entanglement Capacity Estimates and Throughput Measurements of Quantum Channels

The throughput is an important performance metric of entangled qubit distribution quantum networks, and may be characterized by the number of distributed entangled qubit pairs per second (ebps). It is measured over physical quantum network connections using specialized instruments, including photonic entanglement sources and single photon detectors. Extensive theory has been developed to estimate the entangled qubit capacity of quantum channels using abstractions of physical connections. These two quantities both characterize the throughput performance but in different ways, and typically have been hard to relate to each other in concrete terms, in part due to the lack of precise measurements with matching analytical models and derivations. We describe measurements on a physical testbed with fiber connections of lengths 0-75 kilometers. We obtain the normalized analytic capacity estimates using the transmissivity approximations derived using single photon coincidence measurements, and convert them to bounds on throughput (measured in ebps) using a multiplier derived from co-located detector measurements. The results indicate consistent throughput measurements upper-bounded by their analytical capacity estimates across all connections. We show that previous capacity estimates using light measurements are below ebps measurements for some connections, due to the inclusion of non-representative decrease of light levels outside C-band with distance.

Rao, Nageswara↗
DOE OSTI2024

GALIC: hybrid multi-qubitwise pauli grouping for quantum computing measurement

Abstract Observable estimation is a core primitive in NISQ-era algorithms targeting quantum chemistry applications. To reduce the state preparation overhead required for accurate estimation, recent works have proposed various simultaneous measurement schemes to lower estimator variance. Two primary grouping schemes have been proposed: full commutativity (FC) and qubit-wise commutativity (QWC), with no compelling means of interpolation. In this work we propose a generalized framework for designing and analyzing context-aware hybrid FC/QWC commutativity relations. We use our framework to propose a noise-and-connectivity aware grouping strategy: Generalized backend-Aware pauLI Commutation (GALIC). We demonstrate how GALIC interpolates between FC and QWC, maintaining estimator accuracy in Hamiltonian estimation while lowering variance by an average of 20% compared to QWC. We also explore the design space of near-term quantum devices using the GALIC framework, specifically comparing device noise levels and connectivity. We find that error suppression has a more than 10 × larger impact on device-aware estimator variance than qubit connectivity with even larger correlation differences in estimator biases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Hidden Rotation Symmetry of the Jordan–Wigner Transformation and Its Application to Measurement in Quantum Computation

Using a global rotation by 𝜃 about the z-axis in the spin sector of the Jordan–Wigner transformation rotates Pauli matrices 𝑋̂ and 𝑌̂ in the 𝑥−𝑦 -plane, while it adds a global complex phase to fermionic quantum states that have a fixed number of particles. With the right choice of angles, this relates expectation values of Pauli strings containing products of 𝑋̂ and 𝑌̂ to different products, which can be employed to reduce the number of measurements needed when simulating fermionic systems on a quantum computer. Here, we derive this symmetry and show how it can be applied to systems in Physics and Chemistry that involve Hamiltonians with only single-particle (hopping) and two-particle (interaction) terms. We also discuss the consequences of this for finding efficient measurement circuits in variational ground state preparation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1987

Monocrystalline silicon gradiometer for gravity experiments in space

A very important research effort has been made in the last decade in the field of high precision measurement with laser instrumentation. The development of a space borne gradiometer operating at a high sensitivity level using laser measurement of the distance between proof mass over a short base line of order one meter is discussed. Two aspects of laser technology make it a promising tool for gradiometry measurements: quantum limited accuracy and absolute distance measurements. The quantum limit associated with laser instrumentation was formulated. The relevant quantum and classical sources of errors in laser measurements were reviewed and corresponding laser performance requirements for gradient measurements were evaluated. Some mechanical quality factor measurements were made on simple resonant monocrystalline silicon suspensions. It was discovered that the use of zero derivative restoring forces to position the gradiometer test masses will dramatically reduce the gradiometer temperature control requirements. A laser beam side injection scheme was discovered which permits rejection of common mode accelerations. These concepts are briefly discussed.

Richard, Jean-Paul↗
NASA NTRS1992

A Gaussian measure of quantum phase noise

We study the width of the semiclassical phase distribution of a quantum state in its dependence on the average number of photons (m) in this state. As a measure of phase noise, we choose the width, delta phi, of the best Gaussian approximation to the dominant peak of this probability curve. For a coherent state, this width decreases with the square root of (m), whereas for a truncated phase state it decreases linearly with increasing (m). For an optimal phase state, delta phi decreases exponentially but so does the area caught underneath the peak: all the probability is stored in the broad wings of the distribution.

Schleich, Wolfgang P.↗
NASA NTRS1978

Quantum nondemolition measurements - Comment on recent developments

The limitations of the detectability of extremely weak signals (gravitational radiation for instance) imposed by Heisenberg's uncertainty principle on the sequential determination of those signals have been explored recently. A variety of schemes have been proposed to circumvent these limitations. Although all of the earlier attempts have been proven fruitless a recent proposal seems to be quite promising. The scheme, consisting of two harmonic oscillators interacting with each other in a peculiar way, allows for an exact analytical solution which is derived here. If it can be assumed that the expectation value of one of the canonical variables of the total system suffices to monitor the weak signal it can be shown that, in the absence of thermal noise, arbitrarily weak signals can in principle be measured without interference from the uncertainty principle.

Von Roos, O.↗
DOE OSTI2024

Toward coherent quantum computation of scattering amplitudes with a measurement-based photonic quantum processor

In recent years, applications of quantum simulation have been developed to study the properties of strongly interacting theories. This has been driven by two factors: on the one hand, needs from theorists to have access to physical observables that are prohibitively difficult to study using classical computing; on the other hand, quantum hardware becoming increasingly reliable and scalable to larger systems. In this work, we discuss the feasibility of using quantum optical simulation for studying scattering observables that are presently inaccessible via lattice QCD and are at the core of the experimental program at Jefferson Laboratory, the future Electron-Ion Collider, and other accelerator facilities. We show that recent progress in measurement-based photonic quantum computing can be leveraged to provide deterministic generation of required exotic gates and implementation in a single photonic quantum processor. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Current-based metrology with two-terminal mesoscopic conductors

The traditional approach to quantum parameter estimation focuses on the quantum state, deriving fundamental bounds on precision through the quantum Fisher information. In most experimental settings, however, performing arbitrary quantum measurements is highly unfeasible. In open quantum systems, an alternative approach to metrology involves the measurement of stochastic currents flowing from the system to its environment. However, the present understanding of current-based metrology is mostly limited to Markovian master equations. Considering a parameter estimation problem in a two-terminal mesoscopic conductor, we identify the key elements that determine estimation precision within the Landauer-Büttiker formalism. Crucially, this approach allows us to address arbitrary coupling and temperature regimes. Furthermore, we obtain analytical results for the precision in linear-response and zero-temperature regimes. For the specific parameter estimation task that we consider, we demonstrate that the boxcar transmission function is optimal for current-based metrology in all parameter regimes.

Landauer formula↗
DOE OSTI2026

Noise-canceling quantum feedback: Non-Hermitian dynamics with applications to state preparation and magic state distillation

Time-continuous quantum measurement allows for the tracking of a quantum system in real time via sequences of short, and individually weak, measurement intervals. Such measurements are necessarily invasive, imparting backaction to the system, and allowing the observer to update their state estimate based on stochastic measurement outcomes. Feedback control then involves real-time interventions by an observer, conditioned on the time-continuous measurement signal that they receive. Here, we consider here diffusive quantum trajectories and focus on the “noise-canceling” subset of feedback protocols that aim to minimize the degree of stochasticity in the dynamics. We derive such a class of feedback operations, showing that under the idealized assumptions of pure states, unit measurement efficiency, and zero time delay in implementing feedback operations, perfectly noise-canceling feedback always exists. We consider the resulting noise-canceled dynamics generated by an effective non-Hermitian Hamiltonian; while non-Hermitian Hamiltonians from continuous monitoring generally describe rare dynamics (accessible by costly postselection), the use of noise-canceling feedback here leads to non-Hermitian dynamics that occur deterministically. We demonstrate this via examples of entangled state preparation and stabilization. We then illustrate the potential for the application of noise cancellation to boost success rates in magic state distillation protocols. We show that adding feedback based on noise cancellation into a time-continuous five-to-one distillation protocol leads to higher probabilities of successful distillation across a range of input errors and increases the threshold on input errors for which the protocol is effective. Our results highlight the efficacy of noise-canceling feedback-aided protocols for quantum state preparation and stabilization tasks.

Karmakar, Tathagata [University of California, Ber↗
NASA NTRS1996

Physical Meaning of the Optimum Measurement Process in Quantum Detection Theory

The optimum measurement processes are represented as the optimum detection operators in the quantum detection theory. The error probability by the optimum detection operators goes beyond the standard quantum limit automatically. However the optimum detection operators are given by pure mathematical descriptions. In order to realize a communication system overcoming the standard quantum limit, we try to give the physical meaning of the optimum detection operators.

Osaki, Masao↗
NASA NTRS1987

Innovative methods for the measurement of I* quantum yields and kinetics by diode laser gain-versus-absorption

The quantum yields of a variety of candidate molecules for solar lasant materials to produce I* were tested. The absorption spectrum was measured for each compound and the I* yield determined by the diode laser or by infrared emission, using C3F7I as a standard. The results of these measurements are summarized. A GaAsInP diode laser system was developed to probe I and I* atoms to obtain yields and kinetics. A technique of gain-versus-absorption spectroscopy was investigated to measure quantum yields with high accuracy. The errors in the yield data were reduced to +/- 2% or less. In addition, experiments were set up to measure the rates of F-sublevel changing collisions in both the I ground state and the I* excited state. Finally, experiments and modelling were carried out to explore the possibility of measuring the recombination rates of I* with C3F7 radicals.

Leone, Stephen R.↗
NASA NTRS1992

The ultimate quantum limits on the accuracy of measurements

A quantum generalization of rate-distortion theory from standard communication and information theory is developed for application to determining the ultimate performance limit of measurement systems in physics. For the estimation of a real or a phase parameter, it is shown that the root-mean-square error obtained in a measurement with a single-mode photon level N cannot do better than approximately N exp -1, while approximately exp(-N) may be obtained for multi-mode fields with the same photon level N. Possible ways to achieve the remarkable exponential performance are indicated.

Yuen, Horace P.↗