Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Proton coupled electron transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

The influence of protein electrostatics on potential inversion in flavoproteins

Biology uses relatively few electron-transfer cofactors, tuning their potentials, electronic couplings, and reorganization energies to carry out the required chemistry. It is remarkable that the potential ordering of two-electron transfer active flavins can be normal (first oxidation at low potential and second oxidation at high potential) or inverted, and the gap between the potentials can be as large as one volt. Analysis based on structural bioinformatics and electrostatics indicates that the ordering of the flavin redox potential is influenced by protein electrostatics. In all 36 flavoproteins examined, the introduction of a negative charge near the flavin in silico increases the extent of potential inversion (by lowering the electrochemical potential of the second electron-transfer step); the introduction of a positive charge near the flavin favors normally ordered potentials. We also find that the addition of positive charges increases the electrochemical potential for the naturally occurring one-electron transition in flavodoxins (between deprotonated hydroquinone and neutral semiquinone) and also increases the second one-electron transition in bifurcating flavins (between anionic semiquinone and fully oxidized flavin). Finally, we find that proximity of a proton acceptor, notably conserved arginine, supports proton-coupled electron transfer because it may act as a proton acceptor, promoting potential inversion. This key arginine residue may enable two-electron transfer chemistry by promoting the proton-coupled electron transfer process over the pure electron transfer process, suggesting how a protein's flavin environment may influence one- or two-electron chemistry in flavoproteins.

Singh, Niven [Duke Univ., Durham, NC (United State↗
DOE OSTI2026

Leveraging Multiproton-Coupled Electron Transfer to Improve Ir(III) Photocatalyst Efficiency

In photoredox reactions, charge recombination (CR) limits quantum yields, hindering the efficient conversion of light energy into catalytic activity. To address this, we drew inspiration from redox relays in photosystem II (PSII) and developed a new series of iridium(III) complexes featuring covalently attached benzimidazole-phenol-pyridine (BIP-Py) groups to facilitate intramolecular multiproton-coupled electron transfer (MPCET). Herein, we evaluate the effects of MPCET through an extended and well-defined hydrogen-bond network to improve photocatalytic activity and mitigate rapid charge recombination. Infrared spectroelectrochemistry reveals pyridine protonation upon phenol oxidation, while visible spectroelectrochemistry and transient absorption spectroscopy confirm the electro- and photochemical formation of chargeseparated states (CSS) involving oxidized BIP, resulting from intramolecular proton-coupled electron transfer (PCET). The application of the BIP-Py platform in a photocatalytic Nhydroxyphthalimide ester reduction reaction resulted in a ∼106-fold reduction in CR rate and a quantum yield enhancement of up to 157%. Our findings suggest that incorporating MPCET-based redox relays into photocatalyst frameworks is an effective strategy to enhance the efficiency of photocatalytic systems.

Catalysts↗
DOE OSTI2025

Fullerene Promotes CO 2 Reduction to Methanol by a Cobalt(II) Phthalocyanine Electrocatalyst

Heterogenization of molecular electrocatalysts offers an attractive way to improve the catalytic selectivity and efficiency of CO 2 conversion to liquid fuels. Herein, we employ density functional theory to compare the mechanism of CO 2 RR by a cobalt(II) tetra(amino)phthalocyanine (Co(II)Pc(NH 2 ) 4 ) electrocatalyst with and without the presence of fullerene support. Our DFT calculations suggest that the CO 2 reduction mechanism is initiated by a metal-based electron reduction followed by subsequent CO 2 nucleophilic addition, electron transfer, proton transfer, water dissociation, and proton-coupled electron transfer steps that lead to CO and methanol formation. We show that graphitic interactions between the Co(II)Pc(NH 2 ) 4 electrocatalyst and C 60 support selectively improve the CO 2 RR to methanol at mild potentials. The undesirable hydrogen evolution reaction (HER) was also investigated for both electrocatalysts and proceeds via the protonation of the cobalt metal center over the nitrogen atom in the inner ring. The competition between the HER and the CO 2 RR was improved in favor of CO and methanol formation using the Co(II)Pc(NH 2 ) 4 @C 60 electrocatalyst. Overall, our results suggest C 60 as a promising graphitic support for molecular electrocatalysts integration for CO 2 catalysis.

Alcohols↗
DOE OSTI2025

Proton transfer during reduction of the catalytic metallo-cofactors of the three nitrogenase isozymes

Nitrogenase catalyzes biological nitrogen fixation, the conversion of atmospheric N 2 into bioavailable ammonia. The three nitrogenase isozymes—Mo-nitrogenase, V-nitrogenase, and Fe-nitrogenase—utilize catalytic cofactors distinguished by their metal composition (Fe 7 M, M = Mo, V, or Fe; denoted FeM-co). Their catalytic cycles involve stepwise addition of 8[e−/H+] to FeM-co, generating intermediates designated E n , where n is the number of [e − /H + ] delivered. The electron-transfer has been extensively characterized, but the proton delivery has not. Here, we investigate [e − /H + ] delivery during early-stage conversions, primarily E 0 → E 1 (H), for each of the three nitrogenases, using as reductants γ-ray-generated thermolyzed, mobile electrons at 77 K, and radiation-generated solvent radicals during subsequent annealing to higher temperatures. Our results show E 0 → E 1 (H) conversion differs among the three MFe-proteins. The FeMo-co of MoFe-protein accepts an electron (ET) during 77 K γ-irradiation, but proton transfer (PT) to generate E 1 (H) is only enabled by conformational or thermodynamic activation upon cryoannealing to ∼200 K(ET/PT). For VFe-protein, E 1 (H) forms during annealing at-and-above 210 K by electron-transfer to FeV-co from radicals through proton-coupled electron transfer (PCET), which too is enabled by activated proton transfer. FeFe-protein differs in directly exhibiting delivery of protons at 77 K, which together with the mobile electrons react to form E 1 (H). This could well occur by PCET at 77 K, but does not preclude the possibility of sequential 77 K electron/proton transfer (ET/PT). In addition, 450 nm photolysis reveals the E 1 (H) state of FeV-co, like that of FeFe-co, contains a hydride bound to a formally oxidized cofactor. The mechanistic differences observed here provide a contribution towards understanding the sources of catalytic differences among the three nitrogenase isozymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electrochemically Determined and Structurally Justified Thermochemistry of H atom Transfer on Ti-Oxo Nodes of the Colloidal Metal–Organic Framework Ti-MIL-125

Titanium dioxide (TiO 2 ) has long been employed as (photo)electrodes for reactions relevant to energy storage and renewable energy synthesis. Proton-coupled electron transfer (PCET) reactions with equimolar amounts of protons and electrons at the TiO 2 surface or within the bulk structure lie at the center of these reactions. Because a proton and an electron are thermochemically equivalent to an H-atom, these reactions are essentially H-atom transfer reactions. Thermodynamics of H-atom transfer has a complex dependence on the synthetic protocol and chemical history of the electrode, the reaction medium, and many others; together, these complications preclude the understanding of the H-atom transfer thermochemistry with atomic-level structural knowledge. Herein, we report our success in employing open-circuit potential (E OCP ) measurements to quantitatively determine the H-atom transfer thermochemistry at structurally well-defined Ti-oxo clusters within a colloidally stabilized metal–organic framework (MOFs), Ti-MIL-125. The free energy to transfer H-atom, Ti 3+ O–H bond dissociation free energy (BDFE), was measured to be 68(2) kcal mol -1 . To the best of our understanding, this is the first report on using E OCP measurements to quantify thermochemistry on any MOFs. The proton topology, the structural change upon the redox reaction, and BDFE values were further quantitatively corroborated using computational simulations. Furthermore, comparisons of the E OCP -derived BDFEs of Ti-MIL-125 to similar parameters in the literature suggest that E OCP should be the preferred method for quantitatively accurate BDFE calculations. Here, the reported success in employing E OCP for nanosized Ti- MIL-125 should lay the ground for thermochemical measurements of other colloidal systems, which are otherwise challenging. Implications of these measurements on Ti-MIL-125 as an H-atom acceptor in chemical reactions and comparisons with other MOFs/metal oxides are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Electrolyte-Dependent, “Microscopically Irreversible” H-Atom Transfer Kinetics of Ce-Based Metal–Organic Framework, Ce-MOF-808

Redox reactions at the interface of metal oxides and protic electrolytes almost always involve protons and electrons in equal amounts. Given the stoichiometry, these proton-coupled electron transfer (PCET) reactions are thermochemically equivalent to net H-atom transfer (HAT) reactions. The correlation between the chemical nature of solid catalysts and HAT kinetics has been employed for decades as the design principle for energy-relevant reactions (e.g., reactions of 2H + /H 2 ). More recently, chemists have experimentally determined that a change in liquid electrolytes that alters the microenvironment at the redox-active sites has an equally profound impact on electrocatalysis involving PCET/HAT. Yet, precise correlations between the chemical nature of electrolytes and the PCET kinetics are, to date, rare in the literature. Herein, we report our findings using the Ce-based metal−organic framework, Ce-MOF-808, as a model system. Each Ce 6 (μ 3 −O) 4 (μ 3 − OH) 4 (OH) 6 (H 2 O) 6 node of this MOF undergoes a 1H + /1e − redox reaction. Using chronoamperometry and the Cottrell analysis, we have determined that the PCET hopping kinetics within the pores of Ce-MOF-808 can change by orders of magnitude by altering the buffer species and the proton activity of the electrolyte. Furthermore, in all buffers, reductive reactions were ∼3−10 times faster in kinetics than the reverse oxidative reaction with the same electrochemical driving force, suggesting that the system, at first glance, violates the principle of microscopic reversibility. Isothermal titration calorimetry (ITC) and computational simulations corroborated that the buffer-node binding thermodynamics are quite distinct, depending on the chemical nature of the buffer and the oxidation state of the node. Together, these results suggest that the substrate and the product during the oxidative vs reductive reaction of Ce-MOF-808 are chemically different species, which explains the apparent ‘microscopic irreversibility.’ Thus, the rational modulation of electrolytes can dramatically enhance PCET kinetics, even though the solid electrodes remain identical. Implications of these findings are contrasted with the electrochemical/electrocatalytic behavior of other redox-active MOFs, heterogeneous catalysts, and enzymatic systems at the solid−liquid interface.

Ce-based MOF↗
DOE OSTI2025

Electrocatalytic Ammonia Oxidation by Pyridyl-Substituted Ferrocenes

Ammonia (NH 3 ) is a promising carbon-free fuel when prepared from sustainable resources. First-row transition metal electrocatalysts for ammonia oxidation are an enabling technology for sustainable energy production. We describe electrocatalytic ammonia oxidation using robust molecular complexes based on Earth-abundant iron. Electrochemical studies of ferrocenes with covalently attached pyridine arms reveal facile ammonia oxidation in DMSO (2.4 M NH 3 ) with modest overpotentials (η = 770–820 mV) and turnover frequencies (125–560 h –1 ). Experimental and computational studies indicate that the pendant pyridyl base serves as an H-bond acceptor with an N–H bond of ammonia that transfers a proton to the pyridine following oxidation by the attached ferrocenium moiety in a proton-coupled electron transfer (PCET) step. This generates an amidyl (•NH 2 ) radical stabilized via H-bonding to a pendant pyridinium moiety that rapidly dimerizes to hydrazine (H 2 N–NH 2 ), which is easily oxidized to nitrogen (N 2 ) at the glassy carbon working electrode. This report identifies a general strategy to oxidize ammonia via H-bonding to a base (B:), thereby activating [B···H-NH 2 ] toward PCET by a proximal oxidant to form [BH···NH 2 ] +/• radical cations, which are susceptible to dimerization to form easily oxidized hydrazine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synthesis, Structure, and Redox Reactivity of Ni Complexes Bearing a Redox and Acid–Base Non-innocent Ligand with Ni II , Ni III , and Ni IV Formal Oxidation States

Here, a series of Ni complexes bearing a redox and acid–base noninnocent tetraamido macrocyclic ligand, H 4 -(TAML-4) {H 4 -(TAML-4) = 15,15-dimethyl-5,8,13,17-tetrahydro-5,8,13,17-tetraaza-dibenzo[a,g]cyclotridecene-6,7,14,16-tetraone}, with formal oxidation states of Ni II , Ni III , and Ni IV were synthesized and characterized structurally and spectroscopically. The X-ray crystallographic analysis of the Ni complexes revealed a square planar geometry, and the [Ni(TAML-4)] complex with the formal oxidation state of Ni IV was characterized to be [Ni III (TAML-4 •+ )] with the oxidation state of the Ni III ion and the one-electron oxidized TAML-4 ligand, TAML-4 •+ . The Ni III oxidation state and the TAML-4 radical cation ligand, TAML-4 •+ , were supported by X-ray absorption spectroscopy and density functional theory calculations. The reversible interconversions between [Ni II (TAML-4)] 2– and [Ni III (TAML-4)] − and between [Ni III (TAML-4)] − and [Ni III (TAML-4 •+ )] were demonstrated in spectroelectrochemical measurements as well as in chemical oxidation and reduction reactions. The reactivities of [Ni III (TAML-4)] − and [Ni III (TAML-4 •+ )] were then investigated in hydride transfer reactions using NADH analogs. Hydride transfer from 9,10-dihydro-10-methylacridine (AcrH 2 ) to [Ni III (TAML-4 •+ )] was found to proceed via electron transfer (ET) from AcrH 2 to [Ni III (TAML-4 •+ )] with no deuterium kinetic isotope effect (k H /k D = 1.0(2)). In contrast, hydride transfer from AcrH 2 to [NiIII(TAML-4)] − proceeded much more slowly via a concerted proton-coupled electron transfer (PCET) process with k H /k D = 7.0(5). In the latter reaction, an electron and a proton were transferred to the Ni III center and the TAML-4 ligand, respectively. The mechanisms of the ET by [Ni III (TAML-4 •+ )] and the concerted PCET by [Ni III (TAML-4)] − were ascribed to the different redox potentials of the Ni complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Impact of Pendant Amine Basicity on Electrochemically-Promoted Cobalt Hydride Formation: Kinetic and Mechanistic Analysis

Here, we report the role of pendant amine basicity on the proton-coupled electron transfer (PCET) reactivity for the conversion of [Co III Cp(P Ph 2 N R 2 )(CH 3 CN)] 2+ complexes to [HCo III Cp(P Ph 2 N R 2 )] + , which is a key transformation involved in catalytic CO 2 conversion to formate and in H 2 evolution. Three complexes were studied, where the amine substituent (R) varies from benzyl, methoxyphenyl, or phenyl. In previous work on the benzyl system, we showed that the amine on the P Ph 2 N Bn 2 ligand serves as a kinetically accessible protonation site and enables three participating hydride formation mechanisms. In this work, a combination of electrochemical measurements and theoretical calculations were used to show that the electronic donation at the pendant amine influences the accessible PCET mechanism and proton transfer kinetics related to cobalt hydride formation under analogous reaction conditions. Notably, the amine with the most electron-donating substituent correlates to the lowest barrier for amine protonation, and specific cobalt hydride formation mechanisms can be shut off for the amine with the least electron-donating substituent. The mechanistic and kinetic changes upon modulation of the amine substituent have great implications for overall catalytic efficiency and selectivity, especially to generate the cobalt hydride intermediate involved in selective CO 2 reduction to formate. This work shows how to exploit kinetic basicity using ligand-cooperative design to facilitate PCET reactions involved in energy related transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Protonated Tungsten Bronze (H x WO 3 ) Acts as an Easily Regenerable Reagent for PCET Reactions

In this study, protonated tungsten bronze powder (H x WO 3 ) was synthesized by a microwave heating technique from tungsten(VI) chloride in benzyl alcohol. This material facilitates a proton-coupled electron transfer (PCET) reaction with 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO) in toluene, an aprotic solvent, to form TEMPOH, evidenced by UV–vis analysis of the organic product and X-ray photoelectron spectroscopy (XPS) analysis showing the oxidation of W 5+ to W 6+ in the remaining powder. Then, under illumination in an acidic aqueous solution, the oxidized WO 3 powder reacts photochromically to regenerate H x WO 3 . The regenerated H x WO 3 reagent remains active for further PCET reactions.

Granular materials↗
DOE OSTI2025

Iridium Polypyridyl Carboxylates as Excited-State PCET Catalysts for the Functionalization of Unactivated C–H Bonds

The design of catalysts capable of functionalizing unactivated C(sp 3 )–H bonds remains a significant goal in synthetic organic chemistry. Herein, we present a novel set of iridium polypyridyl complexes bearing pendent Brønsted basic carboxylates that become potent hydrogen atom abstraction catalysts upon visible light irradiation. Thermochemical and spectroscopic characterization reveal that these excited-state complexes exhibit bond dissociation free energies (BDFEs) of up to 105 kcal mol –1 with long excited-state lifetimes. We demonstrate that these complexes can catalyze C–H alkylation reactions in which the Ir carboxylate mediates both C–H abstraction and formation steps. Mechanistic, spectroscopic, and computational studies are consistent with C−H abstraction proceeding through an excited-state proton-coupled electron transfer (PCET) step. Here, the modular nature of these Ir polypyridyl complexes establishes a foundation for designing tunable and efficient C–H functionalization catalysts based on covalent tethering of excited-state oxidants and bases.

Alcohols↗
DOE OSTI2026

Ensemble Effects on Hydroxide Bond Dissociation Free Energies in Polyoxovanadate Clusters

Understanding structure-property relationships is foundational to numerous modern chemistries, such as proton-coupled electron transfer (PCET). However, an experimentally measured property is the result of the behavior from an ensemble of molecules. Neglecting ensemble effects, especially under complex chemical environments, may obfuscate these relationships and lead to discrepancies between theory and experiment. In this work, we demonstrate the impact of configurational entropy and local chemical environments on hydroxide bond dissociation free energies [BDFE- (O−H)] for a set of polyoxovanadate nanoclusters, at ambient conditions. The O−H bond strengths are investigated via density functional theory (DFT) coupled with statistical thermodynamic analysis and bilinear modeling, and compared with previous experimental results on the same systems, namely electrochemical solutions of: [V 6 O 13−x (OH) x (TRIOL R ) 2 ] −2 (x = 2, 4, 6; R = NO 2 , Me) and [V 6 O 11−x (OMe) 2 (OH) x (TRIOL NO 2 ) 2 ] −2 (x = 2, 4). Interestingly, we find that ensemble effects, even at room temperature, can account for a significant portion of the BDFE(O−H) trend with the degree of reduction via H atom binding, which cannot be fully captured by single-structure, static DFT calculations. Moreover, we find that the ensemble effects may be replicated statistically, requiring only enumeration of energetically accessible H-binding sites. With the ensemble effects resolved, we present a simple bilinear model to reconcile remaining biases between experiment and ensemble-informed theory, which corelate with clusterspecific electronic environment differences. The bilinear model achieves outstanding accuracy vs experiments with a root-mean squared error of 0.4 kcal/mol. Finally, based on the physicochemical characteristics of hydrogen interaction with polyoxometalates, we present a simple methodology that captures the BDFE(O−H) trend while dramatically reducing required DFT calculations by 98% and achieving accuracy within 1 kcal/mol. Overall, this work elucidates the roles and structural origins of configurational entropy and chemical effects on polyoxometalate hydroxide bond energies, with potential applicability to various atomically precise metal oxide systems. Importantly, it introduces models for rapid and highly accurate property calculations in connection with experiments.

Cluster chemistry↗
DOE OSTI2025

Fast methods for multisite charge transfer. Processes II. Analytic nuclear gradients and nonadiabatic dynamics for cCASSCF(1,n) and cCASSCF(2n-1,n) wavefunctions

In this work we derive and implement analytic nuclear gradients and derivative couplings for a constrained complete active space self-consistent field with a small active space designed to model electron or hole transfer. Using a Lagrangian formalism, we are able to differentiate both the CASSCF energy and the constraint (which is required for smooth surfaces over a wide range of parameter space), and the resulting efficient algorithm can be immediately applied to nonadiabatic dynamics simulations of charge transfer processes. Here, we run initial surface-hopping simulations of a proton coupled electron transfer event for a phenoxyl–phenol system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Heterobimetallic multi-site concerted proton electron transfer (MS-CPET) promotes coordination-induced O–H bond weakening

Coordination-induced bond weakening of X–H bonds (X = O, N, C) has been observed in a number of low-valent transition metal compounds. However, the impact of an appended electron reservoir on the bond dissociation free energy of the O–H bond (BDFE O–H ) of a substrate bound to a d 0 metal is poorly understood. To gain insight into the ability of separated deprotonation and oxidation sites to decrease the BDFE O–H during proton-coupled electron transfer (PCET) reactions, a bimetallic system in which the sites of proton and electron loss are two distinct metal sites is described. Herein, the interconversion of tris(phosphinoamide) Zr/Co complexes HO–Zr(MesNP i Pr 2 ) 3 CoCN t Bu and O$≡$Zr(MesNP i Pr 2 ) 3 CoCN t Bu via hydrogen atom addition/abstraction was studied. Since the Zr center remains in the d 0 Zr IV state throughout these transformations, the electron transfer process is mediated by the appended redox-active Co 0/I center. A series of open-circuit potential (OCP) measurements on the HO–Zr(MesNP i Pr 2 ) 3 CoCN t Bu and O$≡$Zr(MesNP i Pr 2 ) 3 CoCN t Bu complexes was performed, from which the BDFE O–H was found to be 64 ± 1 kcal mol −1 . The BDFE O–H value was further verified through a series of stoichiometric H atom transfer reactions, stoichiometric protonation/deprotonation reactions, and computational studies.

Chemistry↗
DOE OSTI2024

Solution-Phase Synthesis of Platinum-Decorated Hydrogen Tungsten Bronzes for Hydrogen Atom Transfer from Oxides to Molecules

Hydrogen bronzes can be used as hydrogen donors for the broad class of reactions involving proton-coupled electron transfer (PCET). Here, in this work, we describe a method to prepare platinum-decorated hydrogen tungsten bronzes, Pt@H x WO 3 · n H 2 O with n = 0, 1, and 2, by reacting the pristine oxides at modest temperatures with a mild reducing agent, H 3 PO 2 , and H 2 PtCl 6 in an aqueous solution. We explored the tunability and kinetics of this reaction and compared it with that of archetypal gas–solid hydrogen spillover. We demonstrate that the identity of the noble metal affects the extent of bronze reduction. This suggests that the mechanism proceeds via the adsorption of a hydrogen-atom species on the noble metal. Finally, we explored the ability of the Pt-decorated hydrogen tungsten bronzes to hydrogenate a model H + /e – acceptor, 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO). The bronze phases return to their fully oxidized states along with the subsequent reduction of TEMPO to TEMPOH. Overall, this work demonstrates a solution-phase method to obtain hydrogen bronzes, which can then be used to perform hydrogen transfer reactions, providing a pathway for the use of extended transition metal oxides as stoichiometric reagents for broad classes of hydrogenation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Vanadium Substitution Dictates H Atom Uptake at Lindqvist-type Polyoxotungstates

Understanding how modification of molecular structures changes the thermochemistry of H atom uptake can provide design criteria for the formation of highly active catalysts for reductive transformations. Herein, we describe the effect of doping an atomically precise polyoxotungstate with vanadium on proton-coupled electron transfer (PCET) reactivity. The Lindqvist-type polyoxotungstate [W 6 O 19 ] 2– displays reversible redox chemistry, which was found to be unchanged in the presence of acid, indicating an inability to couple reduction with protonation. However, the incorporation of a single vanadium center into the structure significantly changes the reactivity, and the potential required for one-electron reduction of [VW 5 O 19 ] 3– was shown to vary with the strength of the acid added. Construction of a potential-pK a diagram allowed assessment of the thermodynamics of H atom uptake, indicating BDFE(O–H) ≈ 64 kcal/mol, while chemical synthesis of the reduced/protonated derivative (TBA) 3 [VW 5 O 19 H] was used to probe the position of protonation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Circumventing Kinetic Barriers to Metal Hydride Formation with Metal–Ligand Cooperativity

We report the two-electron, one-proton mechanism of cobalt hydride formation for the conversion of [Co III Cp(P Ph 2 N Bn 2 )(CH 3 CN)] 2+ to [HCo III Cp(P Ph 2 NBn 2 )] + . This complex catalytically converts CO 2 to formate under CO 2 reduction conditions, with hydride formation as a key elementary step. Through a combination of electrochemical measurements, digital simulations, theoretical calculations, and additional mechanistic and thermochemical studies, we outline the explicit role of the P Ph 2 N Bn 2 ligand in the proton-coupled electron transfer (PCET) reactivity that leads to hydride formation. We reveal three unique PCET mechanisms, and we show that the amine on the P Ph 2 N Bn 2 ligand serves as a kinetically accessible protonation site en route to the thermodynamically favored cobalt hydride. Cyclic voltammograms recorded with proton sources that span a wide range of pK a values show four distinct regimes where the mechanism changes as a function of acid strength, acid concentration, and timescale between electrochemical steps. Peak shift analysis was used to determine proton transfer rate constants where applicable. Furthermore, this work highlights the astute choices that must be made when designing catalytic systems, including the basicity and kinetic accessibility of protonation sites, acid strength, acid concentration, and timescale between electron transfer steps, to maximize catalyst stability and efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cu(II) Stability and UV-Induced Electron Transfer in a Metal–Organic Hybrid: An EPR, DFT, and Crystallographic Characterization of Copper-Doped Zinc Creatininium Sulfate

Single-crystal X-ray diffraction and electron paramagnetic resonance (EPR) spectroscopic experiments, complemented by quantum chemical DFT calculations, were carried out on the copper-doped metal–organic hybrid and Tutton salt analogue zinc creatininium sulfate to determine its crystal structure, to characterize the electronic structure of the doped Cu(II) binding site, and to propose a pathway for an excited-state, proton-coupled electron transfer (PCET) process in UV-exposed crystals. The crystal structure is isomorphous to that of cadmium creatininium sulfate, which has the transition ion, not in direct coordination with the creatinine, but forming a hexahydrate complex, which is bridged to a creatininium through an intervening sulfate ion. The EPR g (2.446, 2.112, 2.082) and copper hyperfine (A Cu : -327, -59.6, 10.8 MHz) tensor parameters are consistent with doped copper replacing host zinc in the metal–hexahydrate complex. These parameters are similar to those observed for copper hexahydrate in doped Tutton salt systems at low temperature, where the unpaired electron occupies mainly the copper 3d x 2 –y 2 orbital. At room temperature in the Tutton systems, vibration couplings stemming from a dynamic Jahn–Teller effect cause tensor averaging which results in a reduction in their maximum g-tensor and hyperfine tensor values. However, like for the doped isomorphous Cd creatinine crystal, the Cu(II) EPR exhibits little, or no room temperature averaging compared to its low temperature pattern. Samples exposed to 254 nm UV light generate a carbon-centered free radical species, characterized by an isotropic g-tensor (g = 2.0029) and an alpha-proton hyperfine coupling (-24 -14 +4 G). These parameters identify it as a creatinine radical cation formed by the oxidative release of one of its C2 methylene hydrogens. DFT calculations confirm the unpaired electronic structures of both the Cu(II) site and free radical. The growth in radical concentration with an increase in the UV exposure time coincides with a decrease in the copper EPR signal, indicating a coupled light-induced oxidation reduction process. A comparison of the crystal structure with the EPR parameters and DFT results provides evidence for a UV-induced PCET.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗