Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Process Modeling of Aerosol‐Cloud Interaction in Summertime Precipitating Shallow Cumulus Over the Western North Atlantic

Abstract Process modeling of Aerosol‐cloud interaction (ACI) is essential to bridging gaps between observational analysis and climate modeling of aerosol effects in the Earth system and eventually reducing climate projection uncertainties. In this study, we examine ACI in summertime precipitating shallow cumuli observed during the Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment (ACTIVATE). Aerosols and precipitating shallow cumuli were extensively observed with in‐situ and remote‐sensing instruments during two research flight cases on 02 June and 07 June, respectively, during the ACTIVATE summer 2021 deployment phase. We perform observational analysis and large‐eddy simulation (LES) of aerosol effect on precipitating cumulus in these two cases. Given the measured aerosol size distributions and meteorological conditions, LES is able to reproduce the observed cloud properties by aircraft such as liquid water content (LWC), cloud droplet number concentration ( N c ) and effective radius r eff . However, it produces smaller liquid water path (LWP) and larger N c compared to the satellite retrievals. Both 02 and 07 June cases are over warm waters of the Gulf Stream and have a cloud top height over 3 km, but the 07 June case is more polluted and has larger LWC. We find that the N a ‐induced LWP adjustment is dominated by precipitation feedback for the 2 June precipitating case and there is no clear entrainment feedback in both cases. An increase of cloud fraction due to a decrease of aerosol number concentration is also shown in the simulations for the 02 June case.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Optimization of nutrient utilization efficiency and productivity for algal cultures under light and dark cycles using genome-scale model process control

Abstract Algal cultivations are strongly influenced by light and dark cycles. In this study, genome-scale metabolic models were applied to optimize nutrient supply during alternating light and dark cycles of Chlorella vulgaris . This approach lowered the glucose requirement by 75% and nitrate requirement by 23%, respectively, while maintaining high final biomass densities that were more than 80% of glucose-fed heterotrophic culture. Furthermore, by strictly controlling glucose feeding during the alternating cycles based on model-input, yields of biomass, lutein, and fatty acids per gram of glucose were more than threefold higher with cycling compared to heterotrophic cultivation. Next, the model was incorporated into open-loop and closed-loop control systems and compared with traditional fed-batch systems. Closed-loop systems which incorporated a feed-optimizing algorithm increased biomass yield on glucose more than twofold compared to standard fed-batch cultures for cycling cultures. Finally, the performance was compared to conventional proportional-integral-derivative (PID) controllers. Both simulation and experimental results exhibited superior performance for genome-scale model process control (GMPC) compared to traditional PID systems, reducing the overall measured value and setpoint error by 80% over 8 h. Overall, this approach provides researchers with the capability to enhance nutrient utilization and productivity of cell factories systematically by combining genome-scale models and controllers into an integrated platform with superior performance to conventional fed-batch and PID methodologies.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Integrated Process Model Utilization and Development for Inertial Fusion Energy

This CRADA between LLNS and Longview Fusion Energy Systems utilized a modernized LLNL Integrated Process Model (IPM) to assess technoeconomic viability and power plant configurations for Inertial Fusion Energy (IFE). During the collaboration period, a streamlined IPM model was produced by LLNL, which consolidated a combination of 3 models under one file. Additionally, obsolete parameters were removed and parameters available for trade space analysis were organized in a user-friendly fashion on the front interface. Gain scaling curves were discussed and analyzed in the framework of the IPM. Additional updates were made to account for cost scaling to today's dollars using an average inflation rate. Heat transfer material costing was updated using a ground up approach with public vendor data. Further levelized cost of electricity (LCOE) methods and models were discussed and reviewed for applicability to the IPM. Prior published literature on optical scaling was also discussed. Moreover, as part of this CRADA, the Participant developed a fusion technology development roadmap and point designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Integrated Process Model Utilization and Development for Inertial Fusion Energy

This CRADA between LLNS and Longview Fusion Energy Systems utilized a modernized LLNL Integrated Process Model (IPM) to assess technoeconomic viability and power plant configurations for Inertial Fusion Energy (IFE). During the collaboration period, a streamlined IPM model was produced by LLNL, which consolidated a combination of 3 models under one file. Additionally, obsolete parameters were removed and parameters available for trade space analysis were organized in a user-friendly fashion on the front interface. Gain scaling curves were discussed and analyzed in the framework of the IPM. Additional updates were made to account for cost scaling to today's dollars using an average inflation rate. Heat transfer material costing was updated using a ground up approach with public vendor data. Further levelized cost of electricity (LCOE) methods and models were discussed and reviewed for applicability to the IPM. Prior published literature on optical scaling was also discussed. Moreover, as part of this CRADA, the Participant developed a fusion technology development roadmap and point designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Preliminary Results on Process Modeling Tools for Determining Variability in Additively Manufactured Stainless Steel 316 Parts

The Advanced Materials and Manufacturing Technologies program aims to accelerate the development, qualification, demonstration, and deployment of advanced materials and manufacturing technologies to enable reliable and economical nuclear energy. However, the distinct characteristics of additive manufacturing (AM) materials, stemming from their unique processing history, microstructure, and properties, pose significant challenges for the qualification and certification of nuclear components. These challenges primarily arise from component-scale variations in microstructure and properties influenced by local process conditions and geometry, which affect thermal history, melt pool dynamics, and microstructure evolution. Computational modeling tools can play a crucial role in predicting and controlling this variability. This report presents preliminary results on process modeling tools designed to predict microstructure variability in additively manufactured stainless steel 316 parts. It details the software packages and physical modeling approaches employed to simulate an AM component within an automated process modeling workflow. Initial results are demonstrated through comparisons between predicted microstructures and experimental measurements across various representative processing conditions. The report concludes by discussing the challenges inherent in process modeling of AM components and outlines a plan for future development needs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Optimization based process modeling of an anaerobic membrane bioreactor system: Application to swine wastewater

To maintain current levels of consumption in the economy with the dwindling supply of non-renewable material and energy, alternative resource streams more traditionally viewed as waste streams must be considered. Fermentation of high-strength wastewaters is one such pathway that allows for the recovery of energy, nitrogen, phosphorus, and carbon compounds. Anaerobic membrane bioreactors (AnMBRs) are an emerging technology that allow for the digestion of wastewater in a much smaller footprint than traditional anaerobic digesters. Adoption of this technology into industry has been limited by membrane capital and cleaning costs, but these costs may be offset through the recovery of valuable products. To evaluate the viability of AnMBR technology in the context of swine wastewater treatment, an optimization-based process model built upon Anaerobic Digestion Model No. 1 (ADM1) has been developed. Modeling results show that a swine wastewater stream provides potential for net positive energy generation from the AnMBR system in most cases. Sensitivity analyses around important variables were conducted to determine focus areas for future research into AnMBR technology and evaluate the robustness of the model to microbial variables that may change with different microbial communities.

09 BIOMASS FUELS↗
DOE OSTI2023

Assessment of Process Modeling Tools for Determining Variability in Additively Manufactured Parts

The Advanced Materials and Manufacturing Technologies (AMMT) program aims to accelerate the development, qualification, demonstration, and deployment of advanced materials and manufacturing technologies to enable reliable and economical nuclear energy However, the unique aspects of additive manufacturing (AM) materials in terms of their processing history, microstructure, and properties, are a major barrier for qualification and certification of nuclear components. Much of this challenge may be attributed to component scale variations in microstructure and properties that are driven by local influences of process conditions and geometry on thermal history, melt pool dynamics, and corresponding microstructure evolution. Computational modeling tools may be helpful in this regard to aid in predicting and controlling this level of variability. The purpose of this report is to review the current state-of-the-art for process modeling with regards to metal AM. For this purpose, we consider specifically the case study of laser powder bed fusion (LPBF) processing of SS316, a family of alloys that are both commonly used in nuclear energy applications and suitable for AM processing. The report first introduces the necessary components of a process modeling workflow, followed by a review of the current status of each. At the end, application of these modeling tools to understanding variability in AM process given their current state are considered, and recommendations for future development are proposed

36 MATERIALS SCIENCE↗
DOE OSTI2023

Physics-constrained Gaussian process model for prediction of hydrodynamic interactions between wave energy converters in an array

To improve the efficiency of wave farms and achieve maximum power generation, the layout of wave energy converters (WECs) in an array needs to be carefully designed so that the hydrodynamic interactions can be positively exploited. For this, the hydrodynamic characteristics of the WEC array in different layouts need to be calculated. However, such calculations using numerical models usually entail significant computational cost, especially for large arrays of WECs. To address the computational challenge, a physics-constrained Gaussian process (GP) model is proposed to replace the original expensive numerical model and predict the hydrodynamic characteristics of the WECs for any array layout. By exploring the relationship between the WEC array (i.e., the input) and different hydrodynamic characteristics (i.e., the output), here we summarize a set of physical constraints/features, including invariance, symmetry, and additivity. This prior knowledge about the input-output relationship is then directly embedded in the constructed GP model through the design of physics-constrained kernels. In particular, a double-sum invariant kernel is first developed to incorporate the invariance and symmetry features, and then an additive kernel is developed to incorporate the additive feature of the problem. The invariant kernel and the additive kernel are then integrated to construct the physics-constrained GP model. Compared to the standard GP model, the proposed physics-constrained GP models require less training data to achieve the desired accuracy in predicting the hydrodynamic characteristics and are also less vulnerable to the curse of dimensionality (i.e., good scalability for large arrays) due to the use of an additive kernel. The efficiency, accuracy, and scalability of the proposed approach are demonstrated through an application to predict the hydrodynamic characteristics for WEC arrays of different sizes and layouts.

16 TIDAL AND WAVE POWER↗
DOE OSTI2026

Opportunities and challenges in process modeling and simulation of electrochemical systems

Electrochemical technologies have garnered intense interest in both academic research and industrial applications due to their potential to increase energy efficiency and reduce carbon footprint. However, electrochemical process fundamentals have been absent from the chemical process simulators available to millions of chemical engineers worldwide. To expedite process research and development of electrochemical technologies in the chemical industry, it is imperative that essential electrochemical process fundamentals be incorporated into process simulators to support modeling and simulation of electrochemical processes. Here, this study examines three process fundamentals key to the research and development of electrochemical processes: electrochemical reaction kinetics, electrolyte thermodynamics, and heat and mass transfer. It further illustrates application of these process fundamentals with a case study modeling an electrochemical process for the conversion of acrylonitrile to adiponitrile. The modeling example highlights the roles of applied voltage on reaction rates, and electron flow rates on the performance of electrochemical processes. It suggests that the applied voltage and electron flow rates are two unique concepts that should be included in simulators for electrochemical processes.

09 BIOMASS FUELS↗
DOE OSTI2023

Physics-guided neural networks with engineering domain knowledge for hybrid process modeling

As neural networks are more frequently used to solve problems in science and engineering, the methods used to incorporate scientific knowledge into these networks are becoming increasingly complex. Here, this work breaks down these complicated techniques into a set of basic strategies which can easily be applied to diverse situations. Several novel neural networks are built using the categories laid out in this work. These networks are tested on simulated data from a continuous stirred tank reactor (CSTR) model to evaluate the advantages provided by each network. The three points demonstrated in this work are: (1) architectural hybrid models can speed up convergence and reduce the amount of data necessary to train a model; (2) adding a physics-guided loss function can improve model generalization and make models more physically consistent; (3) using physics-guided initialization and transfer learning improves accuracy and speeds up convergence, but can harm generalizability if used incorrectly.

42 ENGINEERING↗
DOE OSTI2023

Gaussian Process Modeling For Experimental Procedure Uncertainty

Many laboratory experiments generate data that are characterized by a form of uncertainty that differs from noise: experimental procedure uncertainty. The origin of this type of uncertainty is the difficulty in controlling a subset of experimental conditions in such a way that the experiment is perfectly reproducible within noise. In this report, we describe a Gaussian Process modeling-based method that accounts for experimental procedure uncertainty. The method accounts for variations in conditions from experiment to experiment that are independent between experiments, but correlated within each experiment, and incorporates the resulting uncertainty into predictions at future experimental settings. The method is discussed in the context of a specific chemistry application in which Raman scattering spectra are measured from three-component mixtures.

42 ENGINEERING↗
DOE OSTI2023

Process Modeling and Analysis of a Novel Sorbent Material for Direct Air Capture Applications

This poster presents results of Task 9.0, Advanced Modeling Support of CDR Pilot Projects, of the Carbon Dioxide Removal program (CDR FWP23). Specifically, the poster presents the multi-scale modelling framework to investigate alternate processes configuration for DAC applications including Vacuum-Assisted Temperature Swing Adsorption (TVSA) process and sweep gas for regeneration.

Caballero, Daison↗
DOE OSTI2022

Machine learning for surrogate process models of bioproduction pathways

Technoeconomic analysis and life-cycle assessment are critical to guiding and prioritizing bench-scale experiments and to evaluating economic and environmental performance of biofuel or biochemical production processes at scale. Traditionally, commercial process simulation tools have been used to develop detailed models for these purposes. However, developing and running such models can be costly and computationally intensive, which limits the degree to which they can be shared and reproduced in the broader research community. This study evaluates the potential of an automated machine learning approach to develop surrogate models based on conventional process simulation models. The analysis focuses on several high-value biofuels and bioproducts for which pathways of production from biomass feedstocks have been well-established. The results demonstrate that surrogate models can be an accurate and effective tool for approximating the cost, mass and energy balance outputs of more complex process simulations at a fraction of the computational expense.

09 BIOMASS FUELS↗
DOE OSTI2025

Catalytic Fast Pyrolysis Oil Stand-Alone and Co-Hydroprocessing Case Studies: Design, Cost, and Sustainability Based on Process Model Predictions

Refined liquid fuels provide conveniences for road, rail, air, and marine transportation due to high energy density, ease of transport and storage, and existing production and distribution infrastructure. Biomass conversion technologies can help diversify and increase the supply of liquid fuels towards a more robust energy future. The backbone of such development must include reliable, high-volume biomass supply chains and efficient utilization of those resources. These activities, if pursued, will lead to rural infrastructure development and new jobs.

09 BIOMASS FUELS↗
DOE OSTI2023

Assessing mechanisms for microbial taxa and community dynamics using process models

Disentangling the assembly mechanisms controlling community composition, structure, distribution, functions, and dynamics is a central issue in ecology. Although various approaches have been proposed to examine community assembly mechanisms, quantitative characterization is challenging, particularly in microbial ecology. Here, we present a novel approach for quantitatively delineating community assembly mechanisms by combining the consumer–resource model with a neutral model in stochastic differential equations. Using time-series data from anaerobic bioreactors that target microbial 16S rRNA genes, we tested the applicability of three ecological models: the consumer–resource model, the neutral model, and the combined model. Our results revealed that model performances varied substantially as a function of population abundance and/or process conditions. The combined model performed best for abundant taxa in the treatment bioreactors where process conditions were manipulated. In contrast, the neutral model showed the best performance for rare taxa. Our analysis further indicated that immigration rates decreased with taxa abundance and competitions between taxa were strongly correlated with phylogeny, but within a certain phylogenetic distance only. The determinism underlying taxa and community dynamics were quantitatively assessed, showing greater determinism in the treatment bioreactors that aligned with the subsequent abnormal system functioning. Given its mechanistic basis, the framework developed here is expected to be potentially applicable beyond microbial ecology.

59 BASIC BIOLOGICAL SCIENCES↗