Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precision Cleaning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Planar tunneling spectroscopy on van der Waals superconductors with AlO x junction grown by atomic layer deposition

Here, we demonstrate a method for fabricating a high-quality AlO x -based planar tunnel junction using atomic layer deposition, integrated with the exfoliation and transfer techniques for van der Waals (vdW) materials. The tunneling spectroscopy results on exfoliated Bi 2 Sr 2 CaCu 2 O 8+δ and 2H-NbSe 2 vdW superconductors are highly consistent with that obtained by ultrahigh vacuum scanning tunneling spectroscopy on atomically clean surfaces. The planar tunneling devices enable high-precision spectroscopy over a wide range of temperatures and magnetic fields and reveal novel features and stark contrast between high-T C cuprates and conventional superconductors. This method represents a universally applicable technique for probing the electronic structure of various two-dimensional vdW materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

From the inner to outer Milky Way: a photometric sample of 2.6 million red clump stars

ABSTRACT Large pristine samples of red clump stars are highly sought after given that they are standard candles and give precise distances even at large distances. However, it is difficult to cleanly select red clumps stars because they can have the same Teff and log g as red giant branch stars. Recently, it was shown that the asteroseismic parameters, $\rm {\Delta }$P and $\rm {\Delta \nu }$, which are used to accurately select red clump stars, can be derived from spectra using the change in the surface carbon to nitrogen ratio ([C/N]) caused by mixing during the red giant branch. This change in [C/N] can also impact the spectral energy distribution. In this study, we predict the $\rm {\Delta }$P, $\rm {\Delta \nu }$, Teff, and log g using 2MASS, AllWISE, Gaia, and Pan-STARRS data in order to select a clean sample of red clump stars. We achieve a contamination rate of ∼20 per cent, equivalent to what is achieved when selecting from Teff and log g derived from low-resolution spectra. Finally, we present two red clump samples. One sample has a contamination rate of ∼20 per cent and ∼405 000 red clump stars. The other has a contamination of ∼33 per cent and ∼2.6 million red clump stars that includes ∼75 000 stars at distances >10 kpc. For |b| > 30 deg, we find ∼15 000 stars with contamination rate of ∼9 per cent. The scientific potential of this catalogue for studying the structure and formation history of the Galaxy is vast, given that it includes millions of precise distances to stars in the inner bulge and distant halo where astrometric distances are imprecise.

Lucey, Madeline↗
DOE OSTI2023

Toward extracting $$\gamma $$ from $$B\rightarrow DK$$ without binning

Abstract $$B^\pm \rightarrow DK^\pm $$ B ± → D K ± transitions are known to provide theoretically clean information about the CKM angle $$\gamma $$ γ , with the most precise available methods exploiting the cascade decay of the neutral D into CP self-conjugate states. Such analyses currently require binning in the D decay Dalitz plot, while a recently proposed method replaces this binning with the truncation of a Fourier series expansion. In this paper, we present a proof of principle of a novel alternative to these two methods, in which no approximations at the level of the data representation are required. In particular, our new strategy makes no assumptions about the amplitude and strong phase variation over the Dalitz plot. This comes at the cost of a degree of ambiguity in the choice of test statistic quantifying the compatibility of the data with a given value of $$\gamma $$ γ , with improved choices of test statistic yielding higher sensitivity. While our current proof-of-principle implementation does not demonstrate optimal sensitivity to $$\gamma $$ γ , its conceptually novel approach opens the door to new strategies for $$\gamma $$ γ extraction. More studies are required to see if these can be competitive with the existing methods.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Precise Synthesis of Complex Si–Si Molecular Frameworks

In this Perspective, we highlight the emergence of target-oriented syntheses of complex molecules composed of Si–Si (oligosilanes) rather than C–C bonds. Saturated oligosilanes structurally resemble alkanes with respect to a tetrahedral geometry, a preference for a staggered conformation in linear chains, the ability to form stable small rings, and tetrahedral stereochemistry at asymmetrically functionalized Si centers. There are also critical differences, for example, differences in multiple bonding and the ability to form penta- and hexacoordinated structures, that mean that chemical reactivity and, in particular, rules for stereoselective synthesis do not cleanly translate from carbon to silicon. This Perspective will discuss recent achievements in the precise, controlled synthesis of complex molecules comprised mainly of Si–Si bonds and highlight the mechanistic insights enabling increased molecular complexity. New tools, such as electrochemical and catalytic reactions, will be discussed as well as the problem of controlling relative configuration in molecules containing multiple stereogenic-at-silicon centers. Furthermore, these synthetic achievements facilitate the discovery of new properties, including insight into light absorption, conformation, and mechanical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Designing polymeric membranes with coordination chemistry for high-precision ion separations

State-of-the-art polymeric membranes are unable to perform the high-precision ion separations needed for technologies essential to a circular economy and clean energy future. Coordinative interactions are a mechanism to increase sorption of a target species into a membrane, but the effects of these interactions on membrane permeability and selectivity are poorly understood. We use a multilayered polymer membrane to assess how ion-membrane binding energies affect membrane permeability of similarly sized cations: Cu 2+ , Ni 2+ , Zn 2+ , Co 2+ , and Mg 2+ . We report that metals with higher binding energy to iminodiacetate groups of the polymer more selectively permeate through the membrane in multisalt solutions than single-salt solutions. In contrast, weaker binding species are precluded from diffusing into the polymer membrane, which leads to passage proportional to binding energy and independent of membrane thickness. Our findings demonstrate that selectivity of polymeric membranes can markedly increase by tailoring ion-membrane binding energy and minimizing membrane thickness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The miniJPAS survey: White dwarf science with 56 optical filters

We analyze the white dwarf population in miniJPAS, the first square degree observed with 56 medium-band, 145 Å in width optical filters by the Javalambre Physics of the accelerating Universe Astrophysical Survey (J-PAS), to provide a data-based forecast for the white dwarf science with low-resolution ($R$ ~ 50) photo-spectra. We define the sample of the bluest point-like sources in miniJPAS with $r$ < 21.5 mag, a point-like probability larger than 0.5, ($u$ - $r$)< 0.80 mag, and ($g$ - $i$)< 0.25 mag. This sample comprises 33 sources with spectroscopic information: 11 white dwarfs and 22 quasi-stellar objects (QSOs). We estimate the effective temperature ($T$ eff ), the surface gravity, and the composition of the white dwarf population by a Bayesian fitting to the observed photo-spectra. The miniJPAS data are sensitive to the Balmer series and the presence of polluting metals. Our results, combined with those from the Javalambre Photometric Local Universe Survey (J-PLUS) which has a lower spectral resolution but has already observed thousands of white dwarfs, suggest that J-PAS photometry would permit – down to $r$ ~ 21.5 mag and at least for sources with 7000 < $T$ eff < 22 000 K – both the classification of the observed white dwarfs into H-dominated and He-dominated with 99% confidence and the detection of calcium absorption for equivalent widths larger than 15 Å. The effective temperature is estimated with a 2% uncertainty, which is close to the 1% from spectroscopy. A precise estimation of the surface gravity depends on the available parallax information. In addition, the white dwarf population at $T$ eff > 7000 K can be segregated from the bluest extragalactic QSOs, providing a clean sample based on optical photometry alone. The J-PAS low-resolution photo-spectra would produce precise effective temperatures and atmospheric compositions for white dwarfs, complementing the data from Gaia. J-PAS will also detect and characterize new white dwarfs beyond the Gaia magnitude limit, providing faint candidates for spectroscopic follow-up.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Production, quality assurance and quality control of the SiPM Tiles for the DarkSide-20k Time Projection Chamber

The DarkSide-20k dark matter direct detection experiment will employ a 21 m 2 silicon photomultiplier (SiPM) array, instrumenting a dual-phase 50 tonnes liquid argon Time Projection Chamber (TPC). SiPMs are arranged into modular photosensors called Tiles, each integrating 24 SiPMs onto a printed circuit board (PCB) that provides signal amplification, power distribution, and a single-ended output for simplified readout. Tiles are further grouped into Photo-Detector Units (PDUs). This paper details the production of the Tiles and the Quality Assurance and Quality Control (QA-QC) protocol established to ensure their performance and uniformity. The production and QA-QC of the Tiles are carried out at Nuova Officina Assergi (NOA), an ISO-6 clean room facility at LNGS. This process includes wafer-level cryogenic characterisation, precision die attaching, wire bonding, and extensive electrical and optical validation of each Tile. The overall production yield exceeds 83.5%, matching the requirements of the DarkSide-20k production plan. These results validate the robustness of the Tile design and its suitability for operation in a cryogenic environment.

Acerbi, F. [Fondazione Bruno Kessler]↗
DOE OSTI2024

Muon Collider Forum report

A multi-TeV muon collider offers a spectacular opportunity in the direct exploration of the energy frontier. Offering a combination of unprecedented energy collisions in a comparatively clean leptonic environment, a high energy muon collider has the unique potential to provide both precision measurements and the highest energy reach in one machine that cannot be paralleled by any currently available technology. The topic generated a lot of excitement in Snowmass meetings and continues to attract a large number of supporters, including many from the early career community. In light of this very strong interest within the US particle physics community, Snowmass Energy, Theory and Accelerator Frontiers created a cross-frontier Muon Collider Forum in November of 2020. The Forum has been meeting on a monthly basis and organized several topical workshops dedicated to physics, accelerator technology, and detector R&D. Findings of the Forum are summarized in this report.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

High-precision Measurement of the 16 O($n, n'γ$) Cross Section using $γ$-ray Detection in Liquid Scintillators with H 2 O and BeO Targets

The 16 O($n, n'γ$) reaction was measured at the Los Alamos Neutron Science Center white neutron source using γ-ray detection in liquid scintillators present in the upper hemisphere of the Correlated Gamma-Neutron Array for sCattering (CoGNAC). Separate measurements of this reaction were performed using H 2 O and BeO targets in successive years. The unique high energies of γ rays emitted from the 16 O($n, n'γ$) reaction facilitated a clean selection of this reaction from threshold to 9.8 MeV incident neutron energy without the need for precise measurements of the γ-ray energy or the scattered neutrons. The precise time resolution of the liquid scintillator detectors was then exploited to obtain high-resolution incident neutron energy measurements, and good agreement was obtained between the H 2 O and BeO results reported here. The dominant literature data sets for this reaction have systematic differences between them, but the present results improve upon the neutron energy resolution of earlier measurements and show important discrepancies in recent data. Finally, tentative data are also shown up to 20 MeV incident neutron energy but are potentially subject to improved understanding of the relative γ-ray and α decay branches from 16 O excited states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Measuring Signatures of Fuel Irradiation in Large Particle Samples

Understanding the operating history of a nuclear facility is one of the key goals in nuclear safeguards, enabling the verification of declared activities. This is accomplished via a number of mechanisms, including the analysis of samples collected at the facility. The best metrics for understanding and verifying the history of nuclear fuel are (1) actinide isotopic content and (2) actinide inter-element ratios. While techniques have long existed for measuring these values with high accuracy and precision in bulk samples, as samples become smaller – such as may be collected in environmental collection – new methods are required both for clean processing of pure samples, and for analysis of these small samples. This study describes a new extraction chromatography technique for recovering U, Pu, and Am from single small aliquots, and advanced mass spectrometry methods for high-precision and high-accuracy analysis of trace and ultra-trace levels of actinides. These techniques are applied to particle samples cut from fuel from a historic nuclear reactor. Ages calculated from Pu–Am chronometry of particles are in excellent agreement with the known operating history of the reactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Toward $\nu_{\mu}$CC $\eta$ Meson Cross Sections on Argon in SBND

The modeling of resonant neutrino interactions on argon is critical for achieving precision neutrino oscillation measurements and searching for physics beyond the Standard Model with both DUNE and the Short-Baseline Neutrino Program. Higher mass resonances beyond the $\Delta$(1232) baryon are particularly poorly constrained experimentally, and yet contribute a significant rate in multi-GeV interactions. The measurement of $\eta$(548) meson production from the decay of these resonances provides a unique probe, as well as the opportunity to measure observables sensitive to final state interactions with the nucleus. This poster will present progress towards the measurement of meson production with the Short-Baseline Near Detector (SBND) at Fermilab, leveraging the clean $\eta \rightarrow \gamma \gamma$ decay channel. The large statistics of the SBND dataset will provide high-precision measurements of this channel capable of constraining uncertainties in the modeling of higher order resonant interactions. This analysis further provides important handles on electromagnetic shower reconstruction performance through evaluation of the 548 MeV $\eta$ invariant mass peak.

Antonakis, Alexander [UC, Santa Barbara]↗
DOE OSTI2026

Magnetic Mapping of MAGIS-100 Tubes to Guide Experimental Redesign

The MAGIS-100 atom interferometer requires an exceptionally uniform, low-magnetic-field environment along its 100-meter baseline. While characterization of the raw structural tubes established a clean baseline, the original surrounding experimental design proved overly complex, ultimately introducing complications that degraded data precision. To resolve these systemic issues, a comprehensive redesign of the surrounding apparatus is underway. This poster details our magnetometry data collection efforts on the baseline tubes and highlights how these measurements are being used to guide a streamlined external design. By leveraging this background data, the new configuration aims to eliminate the complexities of the initial setup and ensure the environmental stability required for high-precision quantum sensing.

Savoia Cooley, Patricia [North Central Coll.]↗
DOE OSTI2021

Role of Polysulfide Anions in Solid-Electrolyte Interphase Formation at the Lithium Metal Surface in Li–S Batteries

Delineating intricate interactions between highly reactive Li-metal electrodes and the diverse constituents of battery electrolytes has been a long-standing scientific challenge in materials design for advanced energy storage devices. Here, we isolated lithium polysulfide anions (LiS 4 - ) from an electrolyte solution based on their mass-to-charge ratio and deposited them on Li-metal electrodes under clean vacuum conditions using ion soft landing (ISL), a highly controlled interface preparation technique. The molecular level precision in the construction of these model interfaces with ISL, coupled with in situ x-ray photoelectron spectroscopy and ab initio theoretical calculations, allowed us to obtain unprecedented insight into the parasitic reactions of well-defined polysulfides on Li-metal electrodes. Our study reveals that the oxide-rich surface layer, which is amenable to direct electron exchange, drives multielectron sulfur oxidation (S o → S 6+ ) processes. Furthermore, our results have substantial implications for the rational design of future Li-S batteries with improved efficiency and durability.

25 ENERGY STORAGE↗
DOE OSTI2023

Co-Assembly of Carbon Nanotube Porins into Biomimetic Peptoid Membranes

Robust and cost-effective membrane-based separations are essential to solving many global crises, such as the lack of clean water. Even though the current polymer-based membranes are widely used for separations, their performance and precision can be enhanced by using a biomimetic membrane architecture that consists of highly permeable and selective channels embedded in a universal membrane matrix. Researchers have shown that artificial water and ion channels, such as carbon nanotube porins (CNTPs), embedded in lipid membranes can deliver strong separation performance. However, their applications are limited by the relative fragility and low stability of the lipid matrix. In this work, we demonstrate that CNTPs can co-assemble into two-dimension (2D) peptoid membrane nanosheets, opening up a way to produce highly programmable synthetic membranes with superior crystallinity and robustness. A combination of molecular dynamics (MD) simulations, Raman spectroscopy, X-ray diffraction (XRD), and atomic force microscopy (AFM) measurements to verify the co-assembly of CNTP and peptoids are used and show that it does not disrupt peptoid monomer packing within the membrane. In conclusion, these results provide a new option for designing affordable artificial membranes and highly robust nanoporous solids.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electron-Hadron Colliders: EIC, LHeC and FCC-eh

Electron-hadron colliders are the ultimate tool for high-precision quantum chromodynamics studies and provide the ultimate microscope for probing the internal structure of hadrons. The electron is an ideal probe of the proton structure because it provides the unmatched precision of the electromagnetic interaction, as the virtual photon or vector bosons probe the proton structure in a clean environment, the kinematics of which is uniquely determined by the electron beam and the scattered lepton, or the hadronic final state accounting appropriately for radiation. The Hadron Electron Ring Accelerator HERA (DESY, Hamburg, Germany) was the only electron-hadron collider ever operated (1991–2007) and advanced the knowledge of quantum chromodynamics and the proton structure, with implications for the physics studied in RHIC (BNL, Upton, NY) and the LHC (CERN, Geneva, Switzerland). Recent technological advances in the field of particle accelerators pave the way to realize next-generation electron-hadron colliders that deliver higher luminosity and enable collisions in a much broader range of energies and beam types than HERA. Electron-hadron colliders combine challenges from both electron and hadron machines besides facing their own distinct challenges derived from their intrinsic asymmetry. This review paper will discuss the major features and milestones of HERA and will examine the electron-hadron collider designs of the Electron-Ion Collider (EIC) currently under construction at BNL, the CERN’s Large Hadron electron Collider (LHeC), at an advanced stage of design and awaiting approval, and the Future Circular lepton-hadron Collider (FCC-eh).

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Beam-driven dynamics of aluminium dopants in graphene

Abstract Substituting heteroatoms into graphene can tune its properties for applications ranging from catalysis to spintronics. The further recent discovery that covalent impurities in graphene can be manipulated at atomic precision using a focused electron beam may open avenues towards sub-nanometer device architectures. However, the preparation of clean samples with a high density of dopants is still very challenging. Here, we report vacancy-mediated substitution of aluminium into laser-cleaned graphene, and without removal from our ultra-high vacuum apparatus, study their dynamics under 60 keV electron irradiation using aberration-corrected scanning transmission electron microscopy and spectroscopy. Three- and four-coordinated Al sites are identified, showing excellent agreement with ab initio predictions including binding energies and electron energy loss spectrum simulations. We show that the direct exchange of carbon and aluminium atoms predicted earlier occurs under electron irradiation, although unexpectedly it is less probable than the same process for silicon. We also observe a previously unknown nitrogen–aluminium exchange that occurs at Al–N double-dopant sites at graphene divacancies created by our plasma treatment.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Computing partition functions in the one-clean-qubit model

We present a method to approximate partition functions of quantum systems using mixed-state quantum computation. For positive-semidefinite Hamiltonians, our method has an expected running-time that is almost linear in [M/( ε rel Z )] 2 , where M is the dimension of the quantum system, Z is the partition function, and ε rel is the relative precision. It is based on approximations of the exponential operator as linear combinations of certain operators related to block-encoding of Hamiltonians or Hamiltonian evolutions. The trace of each operator is estimated using a standard algorithm in the one-clean-qubit model. For large values of Z , our method may run faster than exact classical methods, whose complexities are polynomial in M . We also prove that a version of the partition function estimation problem within additive error is complete for the so-called DQC1 complexity class, suggesting that our method provides a superpolynomial speedup for certain parameter values. Overall, to attain a desired relative precision, we develop a classical procedure based on a sequence of approximations within predetermined additive errors that may be of independent interest.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Reticular Chemistry for Highly Porous Metal–Organic Frameworks: The Chemistry and Applications

Current global crises related to clean energy and the environment entail the development of materials that are capable of addressing these challenges. Metal–organic frameworks (MOFs), a class of functional materials assembled from metal-containing nodes and organic ligands via coordination bonds, have been successfully developed for various applications, including catalysis, toxic chemical removal, and gas storage and separation, as a result of their highly tailorable nature and precisely engineered pore structures. In particular, the exceptionally high surface areas and porosities of MOFs are two of their most attractive characteristics and place them among the best porous materials for the storage of clean energy gases, such as hydrogen and methane. Reticular chemistry stands out as a prominent approach to the design of MOFs as this strategy allows for the rational top-down design of frameworks guided by topological nets to afford extended framework structures with precise architectural arrangements at the molecular level. Furthermore, bridging the gap between reticular chemistry design strategies and highly porous MOFs can facilitate the development of next-generation high-performance materials through state-of-the-art chemical design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗