Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PrOF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Rapid charging made practical in graphite-based lithium batteries: surface-acoustic wave turbulent electrolyte mixing to overcome diffusion limited charging rates [Final Report]

One of the key limits in rapidly recharging a lithium-ion battery is the depletion of lithium ions within the electrolyte adjacent the anode during charging and long diffusion time to overcome this depletion. It also causes dendrite formation, inefficient use of the lithium, and battery degradation over many charge-discharge cycles. Because the liquid electrolyte remains quiescent and unmixed, this depletion layer’s depth rapidly grows to match the anode-cathode separation distance at even modest charge rates. The solution proposed by PI Prof. James Friend and Co-PI Prof. Ping Liu, both from the University of California, San Diego, is to mix the electrolyte and minimize the Li+ ion concentration gradient during charging. Even in the presence of the separator, the charging rate could then be significantly increased. They propose to accomplish this using surface acoustic wave (SAW)-driven acoustic streaming, a technique employing 10-mW fingernail-sized solid-state devices from the telecommunications industry to drive turbulent mixing to submicron length scales in a manner completely compatible with the typical 20700 and 18650 cells used in electric vehicles. 0.1. Turbulent acoustic streaming mixes the electrolyte during charging—even with separator Our proposed 100-MHz SAW device used to recirculate the electrolyte is compatible with lithium- ion battery electrochemistry, as it is made in our lab of single-crystal lithium niobate. Their solution is straightforward to drive from a DC power source alongside the signal provided during battery charging. The device is only needed during charging and does not consume power dur- ing battery discharge. Uniquely, SAW generates extreme accelerations of over 1 billion meters per second squared in the fluid, driving turbulent mixing from centimeter to submicron length scales, even through the porous separator materials that tend to be used in batteries, all while avoiding interfering with the anode’s solid electrolyte interphase layer that forms during use. By employing novel fluid mechanics, the investigators are proposing a new direction for battery research away from direct use of materials science and electrochemistry. The chemistry agnostic solution may be employed in any battery chemistry that makes use of liquid electrolytes, providing a broader transformative benefit to the battery research community. They are to produce a series of prismatic and 20700-cell sized 2 Ah batteries capable of being charged and discharged at least 500 times without more than 20% loss in battery capacity, and to provide analysis tools useful to the battery research and development community for adopting this approach for other battery chemistries and configurations.

25 ENERGY STORAGE↗
DOE OSTI2022

International ACM Symposium on High Performance Parallel and Distributed Computing Conference for 2017, 2018, 2019, and 2020

The 28th ACM HPDC Conference was held in Phoenix, Arizona, June 24 and 28, 2019 (hpdc.org/2019), that was colocated with ACM FCRC 2019 (fcrc.acm.org). During the conference, Prof. Geoffrey Fox, Indiana University, was given the HPDC Achievement Award for 2019. Prof gave a keynote speech entitled “Perspectives on High-Performance Computing in a Big Data World. In addition, to the keynote speakers from HPDC and FCRC conferences, the conference organized successfully five workshops and one Ph.D. forum. The ACM FCRC had a total of 2700 attendees, and HPDC had a total of 120 attendees that included 32 students. We have used the DOE sponsorship to support the conference proceedings that acknowledge the DoE support and partially supported the travel to the HPDC PC meeting, Keynote speaker accommodation, best papers, presentation and poster award.

42 ENGINEERING↗
DOE OSTI2023

Amorphous Metal Ribbon (AMR) and Metal Amorphous Nanocomposite (MANC) Materials Enabled High Power Density Vehicle Motor Applications (Final Technical Report)

A collaborative team from Carnegie Mellon Univ. (CMU), North Carolina State Univ. (NCSU) and Metglas, South Carolina have studied new high speed motors (HSMs) with high-power density for traction motor applications. These are enabled by hybrid designs, including Flux Switching with Permanent Magnets (FSWPM) motors, exploiting permanent magnets without heavy rare earths (RE-lean) and high induction/high resistivity soft magnetic materials that allow for high switching frequencies needed to increase power densities. Team members include Michael E. McHenry, Prof. Materials Science & Eng., CMU, with > 30 years experience in magnetic materials development; Subashish Bhattacharya, Prof. Electrical Eng. and Freedom Center Director at NCSU with > 30 years experience in development of power electronic components and systems and Eric Theisen, Director of Research at Metglas, the only US located supplier of AMR and MANC materials. The team offers novel axial motor architectures exploiting soft magnetic materials (SMMs) that switch with low loss at high frequencies and heavy rare earth free permanent magnets that address materials criticality issues, supply chain risks, and high costs for traction motors. Axial-flux permanent magnet motors (APFM), offer efficiency improvements reducing rotor losses and also significantly higher power density. Axial-flux construction requires less core material, high torque-to-weight ratio. Since AFPM machines have thin magnets, they are smaller than radial flux motors making them attractive in space-limited applications. Noise and vibration are less and planar air gaps are easily adjusted. Flexibility in air-gap direction allows many topologies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Multi-scale Dynamics of Kinetic Turbulence in Weakly Collisional, High-Beta Plasmas (Final Report for DOE Grant DE-SC0019046)

This grant was a collaborative grant between Prof Matt Kunz (Princeton) and Prof. Eliot Quataert. Quataert was initially a faculty member at UC Berkeley when the grant was funded but moved to Princeton during the timeframe of this grant. Over the course of this grant we made major progress on understanding turbulence and multi-scale dynamics in weakly collisional high-beta plasmas. The most important contributions included: We developed one of the most compelling theoretical explanations for a decades-old puzzle at the heart of our understanding of the origin of the solar wind. The puzzle is that many of the observations of ion temperatures and distribution functions in the solar wind are consistent with cyclotron resonant heating. However, theoretical models of MHD turbulence in the solar wind show that most of the turbulent energy remains at low frequencies below the cyclotron frequency. In Squire et al. (2022), we showed, however, that in imbalanced turbulence (in which there is an asymmetry in the Alfven-wave flux in opposite directions along the magnetic field), which is the norm in the fast solar wind, the turbulent energy reaches a ‘bottleneck’ near the ion Larmor radius, and the amplitude and characteristic frequency of the fluctuations grow until the cyclotron frequency is reached.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Theoretical Study of the Single Electron Optical Stochastic Cooling Experiment at the IOTA Facility (Final Technical Report)

The objectives of this proposal were to explore fundamental aspects of radiation from individual and small groups of electrons in the optical stochastic cooling experiment conducted at Fermi National Laboratory's IOTA facility. Professor Swapan Chattopadhyay collaborated directly with the IOTA team on their initial experimental endeavors. Concurrently, a team from Berkeley, including Prof. Wurtele, Dr. Charman, and Dr. Greggory Penn from LBNL, and Prof. Chattapadhyay, pursued a theoretical exploration to identify potential subsequent experiments for IOTA. A wide range of possible experiments were considered, but they do not allow for tests for new quantum mechanical phenomena at the precision level of the current IOTA apparatus. However, the experimentally observed optical stochastic cooling of a single electron in IOTA validated the relevance of the classical electromagnetic field nature of the continuous electron-radiation interaction (as opposed to discrete instantaneous photon emissions and associated 'classical particle trajectory jumps') responsible for cooling and pointed towards innovative methods of experimental techniques to measure 'turn-by-turn' field correlations. Such measurements have the promise of bridging the transition from classical fields building up to discrete quantum transitions and enhance proper theoretical understanding.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Student Support for the “Frontiers in Attosecond & Ultrafast X-ray Science” School

The new millennium witnessed two revolutionary breakthroughs in ultrafast x-ray science: table-top XUV sources based on high harmonic generation in gases ushered in the attosecond era while facility-based x-ray free-electron lasers opened the path for intense, femtosecond hard x-rays. This award requested scholarship funds for a 2019 and 2023 School whose prime objective was the training of young scientists in these emerging complementary areas both relevant to DOE BES mission. The school entitled the “Frontiers of Attosecond and Ultrafast X-ray Science (FAXS)” (http://www.erice-attosecond.it/) was the second and fourth in a series, which began in 2017. The two Schools were held during March 10-16, 2019 and March 26-31, 2023 at the Ettore Majorana Foundation and Centre for Scientific Culture (http://www.ccsem.infn.it/) in Erice, Sicily. The DOE funds supported the registration fee for young scientists (graduate students and postdocs) from US institutions. The registration fees included School participation, lodging and meals over the duration of the School. Note, the third addition of the School was held in 2022 as a virtual event due to the pandemic, DOE funds were not necessary for this event. The FAXS School is a course of the 62th and 63rd International School of Quantum Electronics under the directorship of Prof. Diederik Wiersma (University of Florence). The Directors for the FAXS School are Louis DiMauro (The Ohio State University, USA) and Mauro Nisoli (Politecnico di Milano, Italy). The FAXS School program consisted of approximately 10 lectures by leading experts in attosecond and x-ray science (see attached list). Most lecturers delivered a series of three 1-hour lectures. The lecturers were required to spend the full 5 days at the school so to promote interaction with the students. The Erice Majorana Center venue accommodated ~75 young scientists. The registration fee covered the cost of participating in the school, lodging and meals for the entire duration of the school. The schedule consisted of lectures every morning and afternoon except for one afternoon that was reserved for an archaeological excursion. Every evening had a student/postdoc poster session and social gatherings at the Majorana Center to encourage further interaction of all participants and lecturers. The two FAXS Schools attracted an international group of young scientists. The DOE funds supported the registration fee for 11 students/postdocs from US institutions (5 supported in 2019 and 6 supported in 2023). The management of the DOE fellowships were administered through the Research Foundation of The Ohio State University. FAXS scholarships for European students/postdocs were provided by European funding sources administered by co-Director, Prof. Nisoli. All students/postdocs were encouraged to present a poster. Travel expenses to the FAXS School were the responsibility of the student/postdoc home institution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

The International Conference on Surface Plasmon Photonics 10

The International Conference on Surface Plasmon Photonics (SPP Conference) is widely regarded as the premier global conference in nanoscale photonics. The SPP10 meeting was held in the United States for the first time, at Rice University in Houston, Texas, on May 21-26, 2023. This conference was an outstanding venue for communicating research breakthroughs and accomplishments in the represented fields, as well as for visibility, networking, and recruiting, for students, postdoctoral fellows, and faculty throughout the US and the world as they attended this conference. The SPP10 conference hosted sessions on fundamental science, innovations, and applications in modern photonics with high potential for commercialization. Plenary sessions, invited talks from leading scientists in the field, and contributed talks from the larger photonics community on highly multidisciplinary topics of Quantum Plasmonics and Photonics; Energy Harvesting and Plasmonic Chemistry; Active Photonics and Devices; Ultrafast and Nonlinear Phenomena; and Machine Learning/Artificial Intelligence. The meeting schedule includes 3 plenary speakers, 31 Invited talks and 58 contributed talks. There were three well attended poster sessions which included lively discussions. Lunch time in the University Colleges allowed unstructured time for additional networking and discussions. The attendees represented the spectrum of endeavor in this field coming from academia, industry, and government laboratories, both U.S. and foreign scientists, senior researchers, young investigators, and students. The co-chairs of the conference were Prof. Naomi Halas and Prof. Peter Nordlander. The grant from DoE supported student’s and early career scientist’s registration and housing on campus.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

FAIR Framework for Physics-Inspired AI in High Energy Physics (Final Technical Report)

The main deliverable of this proposal was to publish data from high energy physics experiments in a FAIR format so that non-specialists could develop machine learning technologies using our data. The Minnesota team of Profs. Cushman, Furmanski and Rusack, from the high energy experiments CDMS, Micro-Boone and CMS, respectively, and Prof J. Sun from Computer Science worked to organize the data, to provide code to access the data, and where relevant provide documentation describing the data. The FAIR4HEP collaboration was formed with groups from UC San Diego, MIT, and the University of Illinois, with the principal investigator was Dr. Huerta. Collectively we collaborated on the publication of datasets from the LHC experiments. Members of the Minnesota group contributed to the common papers published by the collaboration

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Support for the 2024 American Conference on Theoretical Chemistry (ACTC) (Final Report)

Funds are requested in support of the 2024 American Conference on Theoretical Chemistry. Funds are being requested from the Department of Energy in support of conference registration fees for graduate student and post-doctoral researcher registration fees. This conference will be held in North Carolina, and between 200 and 250 participants are expected. This is the major North American meeting of theoretical chemists, showcasing diverse developments in all aspects of modern theory, including methods development and applications. Applications span all aspects of chemistry, biochemistry, and materials science, including important applications to energy science. The conference will include four days of seminars and poster sessions. As well as serving as a meeting ground for sharing scientific developments and discoveries, the meeting also serves as a locus for mentoring and career development involving younger scientists. The meeting will be chaired by Prof. David Beratan of Duke University, and he will be assisted by other faculty from the region: Profs. Weitao Yang (Duke), Patrick Charbonneau (Duke), Yosuke Kanai (University of North Carolina - Chapel Hill), Zhiyue Lu (University of North Carolina - Chapel Hill), and Elena Jakubikova (North Carolina State University). This group will form a conference commitee that will define thematic topics for the conference, will invite speakers, and will assist with running the conference.

14 SOLAR ENERGY↗
DOE OSTI2022

Comment on “Double Your Variance, Dirtify Your Bayes, Devour Your Pufferfish, and Draw Your Kidstogram,” by Xiao-Li Meng

This contribution is a series of comments on Prof. Xiao-Li Meng’s article, “Double Your Variance, Dirtify Your Bayes, Devour Your Pufferfish, and Draw Your Kidstogram”. Prof. Meng’s article offers some radical proposals and not-so-radical proposals to improve the quality of statistical inference used in the sciences and also to extend distributional thinking to early education. Discussions and alternative proposals are presented.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1994

Origins of interstellar and solar system: Carbonaceous materials

Carbon is a crucial atom in cosmochemistry. It is well-established that carbon is synthesized in stellar interiors after the main sequence, is ejected by red giants as small carbonaceous grains during their 'carbon star' phase, resides in the interstellar medium, and was later incorporated into the solar system. The mechanisms of carbon grain formation and later chemical processing are complex because, with only small thermodynamic differences, carbon can take on a bewildering variety of forms: diamond; oxides; carbides; graphite; aliphatic hydrocarbons; polycyclic aromatic hydrocarbons (PAH's); fullerenes; amorphous carbon; and other compounds. These are evidence for many of the forms of carbon found in astronomical observations. We seek to understand the possible astrophysical sites and conditions of the origins of different forms of carbon by combining state-of-the-art capabilities of carbon chemistry with astrophysical modeling. The work is a collaboration between Prof. Frenklach, a leading carbon materials scientist with both laboratory and computer modeling expertise and Prof. Feigelson, an astrophysicist with interests in star formation. The largest effort under this grant was devoted to developing this concept into a comprehensive quantitative model. In addition to explaining the astronomical properties of red giants producing carbonaceous grains, our model also can incorporate recent meteoritic findings. Finally, our induced nucleation grain formation model provides a natural explanation for the widespread presence of PAH emission bands in the Galactic interstellar medium. A brief synopsis of other activities sponsored under this grant and a list of publications from this grant is included.

Feigelson, Eric D.↗
NASA NTRS2001

Phase Field Modeling of Microstructure Development in Microgravity

This newly funded project seeks to extend our NASA-sponsored project on modeling of dendritic microstructures to facilitate collaboration between our research group and those of other NASA investigators. In our ongoing program, we have applied advanced computational techniques to study microstructural evolution in dendritic solidification, for both pure isolated dendrites and directionally solidified alloys. This work has enabled us to compute dendritic microstructures using both realistic material parameters and experimentally relevant processing conditions, thus allowing for the first time direct comparison of phase field computations with laboratory observations. This work has been well received by the materials science and physics communities, and has led to several opportunities for collaboration with scientists working on experimental investigations of pattern selection and segregation in solidification. While we have been able to pursue these collaborations to a limited extent, with some important findings, this project focuses specifically on those collaborations. We have two target collaborations: with Prof. Glicksman's group working on the Isothermal Dendritic Growth Experiment (IDGE), and with Prof. Poirier's group studying directional solidification in Pb-Sb alloys. These two space experiments match well with our two thrusts in modeling, one for pure materials, as in the IDGE, and the other directional solidification. Such collaboration will benefit all of the research groups involved, and will provide for rapid dissemination of the results of our work where it will have significant impact.

Dantzig, Jonathan A.↗
NASA NTRS2002

SIFTER: Scintillating Fiber Telescopes for Energetic Radiation, Gamma-Ray Applications

The research project "SIFTER: Scintillating Fiber Telescopes for Energetic Radiation, Gamma-Ray Applications" approved under the NASA High Energy Astrophysics Research Program. The principal investigator of the proposal was Prof. Geoffrey N. Pendleton, who is currently on extended leave from UAH. Prof. William S. Paciesas administered the grant during Dr. Pendleton's absence. The project was originally funded for one year from 6/8/2000 to 6/7/2001. Due to conflicts with other commitments by the PI, the period of performance was extended at no additional cost until 6/30/2002. The goal of this project was to study scintillating fiber pair-tracking gamma-ray telescope configurations specifically designed to perform imaging and spectroscopy in the 5 - 250 MeV energy range. The main efforts were concentrated in two areas: 1) development of tracking techniques and event reconstruction algorithms, with particular emphasis on angular resolution; and 2) investigation of coded apertures as a means to improve the instrument angular resolution at low energies.

Paciesas, William S.↗
NASA NTRS2002

Studies of Accreting Neutron Stars with RXTE Cycle 4 Observations: II: Too Observations of Transient LMXBs

NASA Grant NAG 5-9045 provided funds for the research project 'TOO Observations of Transient LMxBs' approved under the Rossi X-ray Timing Explorer (RXTE) Guest Observer Program Cycle 4 and funded under the 1999 NASA Astrophysics Data Program. The principal investigator of the observing time proposal was Dr. M. Mendez (U. of Amsterdam). The grant was funded for one year beginning 3/1/2000. The original proposal was submitted by Prof. Jan van Paradijs, who passed away in 1999 before the funds were distributed. Prof. William S. Pauesas administered the grant during the period of performance. In spite of a wealth of observational data on the kHz QPO in low-mass X-ray binaries (LMXBs), the interpretation of this phenomenon is currently uncertain because the pairs of kHz QPO peaks and the oscillations seen in some Type I X-ray bursts are almost, but not quite, connected by a simple beat frequency relation. The proposal was intended to contribute to a solution to this confusion by making RXTE target-of-opportunity observations of two transient LMXBs, Aql X-1 and 4U 1608-52, if the sources became sufficiently bright.

Paciesas, William S.↗
NASA NTRS2002

Studies of Accreting Neutron Stars with RXTE Cycle 4 Observations: III: TOO Observations of Atoll Sources

NASA Grant NAG 5-9244 provided funds for the research projects 'ASM-Triggered TOO Observations of Kilohertz Oscillations in Five Atoll Sources' and 'Further Measurements of the Kilohertz Oscillations in 4U 1705-44' approved under the Rossi X-ray Timing Explorer (RXTE) Guest Observer Program Cycle 4 and funded under the 1999 NASA Astrophysics Data Program. The principal investigator of the observing time proposals was Dr. E. C. Ford (U. of Amsterdam). The grant was funded for one year beginning 3/15/2000. The original ADP proposal was submitted by Prof. Jan van Paradijs, who passed away in 1999 before the funds were distributed. Prof. Wilham S. Padesas administered the grant during the period of performance. In spite of a wealth of observational data on the kHz QPO in low-mass X-ray binaries (LMXBs), the interpretation of this phenomenon is currently uncertain because the pairs of kHz QPO peaks and the oscillations seen in some Type I X-ray bursts are almost, but not quite, connected by a simple beat frequency relation. Further systematic studies of systems with known QPOs are required in order to better understand the phenomenon. The proposals were intended to contribute to a solution to this confusion by observing the sources as they vary over a wide range of X-ray flux. RXTE target-of-opportunity observations of six transient atoll sources, 4U 0614+09, KS 1732-260, Ser X-1, 4U 1702-42, 4U 1820-30 and 4U 1705-44 were to be performed at various flux levels based on ASM measurements.

Paciesas, William S.↗
NASA NTRS2003

Automated Modeling and Simulation Using the Bond Graph Method for the Aerospace Industry

Bond graph modeling was originally developed in the late 1950s by the late Prof. Henry M. Paynter of M.I.T. Prof. Paynter acted well before his time as the main advantage of his creation, other than the modeling insight that it provides and the ability of effectively dealing with Mechatronics, came into fruition only with the recent advent of modern computer technology and the tools derived as a result of it, including symbolic manipulation, MATLAB, and SIMULINK and the Computer Aided Modeling Program (CAMPG). Thus, only recently have these tools been available allowing one to fully utilize the advantages that the bond graph method has to offer. The purpose of this paper is to help fill the knowledge void concerning its use of bond graphs in the aerospace industry. The paper first presents simple examples to serve as a tutorial on bond graphs for those not familiar with the technique. The reader is given the basic understanding needed to appreciate the applications that follow. After that, several aerospace applications are developed such as modeling of an arresting system for aircraft carrier landings, suspension models used for landing gears and multibody dynamics. The paper presents also an update on NASA's progress in modeling the International Space Station (ISS) using bond graph techniques, and an advanced actuation system utilizing shape memory alloys. The later covers the Mechatronics advantages of the bond graph method, applications that simultaneously involves mechanical, hydraulic, thermal, and electrical subsystem modeling.

Granda, Jose J.↗
NASA NTRS1994

Single track effects, Biostack and risk assessment

The scientific career of Prof. Bucker has spanned a very exciting period in the fledgling science of Space Radiation Biology. The capability for placing biological objects in space was developed, and the methods for properly packaging, retrieving and analyzing them were worked out. Meaningful results on the effects of radiation were obtained for the first time. In fact, many of the successful techniques and methodologies for handling biological samples were developed in Prof. Bucker's laboratories, as attested by the extensive Biostack program. He was the first to suggest and successfully carry out experiments in space directly aimed at measuring effects of single tracks of high-energy heavy galactic cosmic rays by specifically identifying whether or not the object had been hit by a heavy particle track. Because the "hit" frequencies of heavy galactic cosmic rays to cell nuclei in the bodies of space travelers will be low, it is expected that any effects to humans on the cellular level will be dominated by single-track cell traversals. This includes the most important generally recognized late effect of space radiation exposure: radiation-induced cancer. This paper addresses the single-track nature of the space radiation environment, and points out the importance of single "hits" in the evaluation of radiation risk for long-term missions occurring outside the earth's magnetic field. A short review is made of biological objects found to show increased effects when "hit" by a single heavy charged-particle in space. A brief discussion is given of the most provocative results from the bacterial spore Bacillus subtilis: experimental evidence that tracks can affect biological systems at much larger distances from the trajectory than previously suspected, and that the resultant inactivation cross section in space calculated for this system is very large. When taken at face value, the implication of these results, when compared to those from experiments performed at ground-based accelerators with beams at low energies in the same LET range, is that high-energy particles can exert their influence a surprising distance from their trajectory and the inactivation cross sections are some 20 times larger than expected. Clearly, beams from high-energy heavy-ion accelerators should be used to confirm these results. For those end points that can also be caused by low-LET beams such as high-energy protons, it is important to measure their action cross sections as well. The ratio of the cross sections for a high-LET beam to that of a low-LET beam is an interesting experimental ratio and, we suggest, of more intrinsic interest than the RBE (Relative Biological Effectiveness). It is a measure of the "biological" importance of one particle type relative to another particle type. This ratio will be introduced and given the name RPPE (Relative Per Particle Effectiveness). Values of RPPE have appeared in the literature and will be discussed. A rather well-known value of this quantity (13,520) has been suggested for the RPPE of high-energy iron ions to high-energy protons. This value was suggested by Letaw et al. Nature 330, 709-710 (1987)] we will call it the Letaw limit. It will be discussed in terms of the importance of the heavy-ion component vs light-ion component of the galactic cosmic rays. It is also pointed out, however, that there may be unique effects from single tracks of heavy ions that do not occur from light-ion tracks. For such effects, the concepts of both RBE and RPPE lose their meaning.

NASA Discipline Radiation Health↗
NASA NTRS2004

The Structure of Young Stellar Systems: Establishing the Initial Conditions for Planet Formation

FYO1-FY03 Origins support to the PI had been as part of an effort involving Profs. Blake, van Dishoeck and L.G. Mundy of the University of Maryland. As outlined below, the merging of BIMA+OVRO into the Combined Array for Research in Millimeter Astronomy (CARMA) and our mutual involvement in the Spitzer Legacy Science program now provides a more natural means of continuing the Caltech/Maryland collaboration. In addition, the spectroscopy/radiative transfer programs led by Profs. Blake, Hogerheijde, and van Dishoeck form a more cohesive basis for a single proposal. Students supported by our previous Origins grant have been involved in making some of the first sub-arcsecond resolution images of the morphology and chemistry of individual YSOs at OVRO and BIMA, in the analysis of IR spectra taken by ISO, and in continuing exploratory IR diffraction-limited imaging and spectroscopy at the Keck and VLT observatories. Notable scientific accomplishments in the past grant period include: 1) detecting high density and temperature hot cores in the dynamically accreting envelopes of low mass protostars that contain significant quantities of complex, prebioitc molecules, 2) imaging chemical and isotopic zonation in the outer regions of T Tauri star accretion disks, particularly fractional ionization and D/H studies, 3) acquiring and modeling the first extensive CO v = 1 approaches 0 spectroscopy survey of the terrestrial planet-forming region of circumstellar accretion disks, and 4) optimizing detailed radiative transfer modeling of the molecular and dust emission from YSO envelopes and from comets, including a new parallelized implementation.

Blake, Geoffrey A.↗