Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Powder River Basin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Unlocking the Tight Oil Reservoirs of the Powder River Basin, Wyoming

The project focused on detailed geologic characterization, geomechanical studies, well completion optimization, stimulation monitoring, and field development strategies. A key aspect involved partnerships with industry and academic collaborators such as Occidental Petroleum, Southern Illinois University, Britt Rock Mechanics and Piri Technologies. Data acquisition included drilling, logging, coring, deployment of fiber optics, and microseismic monitoring. The project emphasized feedback loops for continuous model updating and integration of economic evaluations to guide development strategies.

02 PETROLEUM↗
DOE OSTI2025

Factors influencing water quality in surface water and alluvial groundwaters downgradient of a reclaimed surface coal mine in the Powder River Basin of southeastern Montana, USA

Abstract Coal mining and reclamation can have a profound influence on hydrogeologic systems, with clear consequences for groundwater quality, yet their long-term influence on downgradient water quality over time following reclamation is less well documented. Geochemical trends were evaluated in water quality downgradient of a fully reclaimed landscape at the former Big Sky Mine in the Rosebud Creek watershed (southeastern Montana, USA), over a 3-year period (2020–2022), including bond release in 2022. Within 6 km downgradient from the reclaimed area, sulfate concentrations decreased from approximately 3500 to 1800 mg l −1 within the Miller Coulee alluvial aquifer. Major ions, δ 34 S SO4 values, and residence time tracers suggest that the observed decreases in sulfate concentration result from a combination of dilution by mixed-age inflows and incomplete transit of the high salinity plume from the mine boundary. Both bedrock and alluvial aquifers of the Rosebud Creek corridor contained contributions of millennia-old regional groundwater, which may serve to mitigate mine-derived high salinity waters. Rosebud Creek, which traverses the outflow zone of Miller Coulee in the study area, exhibited high sulfate concentrations during low flows and consistent downgradient increases in sulfate concentration. The possibility of plume dynamics in Miller Coulee suggests that the greatest water quality impacts may not yet have reached Rosebud Creek.

Keeshin, Skye I. (ORCID:0009000986449872)↗
DOE OSTI2021

Local-Distance Seismic Event Relocation and Relative Magnitude Estimation, Applications to Mining Related Seismicity in the Powder River Basin, Wyoming

Recent efforts to characterize small ( M w < 3 ) seismic events at local distances have become more important because of the increased observation of human-triggered and induced seismicity and the need to advance nuclear explosion monitoring capabilities. The signals generated by low-magnitude seismic sources necessitate the use of nearby short-period observations, which are sensitive to local geological heterogeneity. Local to near-regional distance ( < 300 km ) surface and shear waves can dominate short-period observations from small, shallow seismic sources. In this work, we utilize these observations to estimate precise, relative locations and magnitudes of ~ 700 industrial mining events in Wyoming, using nearly 360,000 observations. The precise, relative location estimates (with formal location uncertainty estimates of less than 1 km) collapse a diffuse collection of mining events into discrete clusters associated with individual blasting operations. We also invert the cross-correlation amplitudes to estimate precise, relative moment magnitude estimates, which help validate and identify disparities in the event sizes reported by regional network catalogs. Joint use of multiple phases allows for the inclusion of more seismic events due to the increase in the number of observations. In some cases, using a single phase allowed us to relocate only 50% of the original reported seismic events within a cluster. Combining shear- and surface-wave phases increased the number of events to above 90% of the original events, allowing us to characterize a broader range of event sizes, source to station distances, and event distributions. This analysis takes a step toward making a fuller characterization of small industrial seismic events observed at local distances.

58 GEOSCIENCES↗
DOE OSTI2021

Paying it Forward: How an Emerging Unconventional Play can Hit the Ground Running

While every tight oil play is unique, there are lessons that can be transferred from one play to another to improve the efficiency and pace of production operations and development. These improvements may not fit precisely in every basin or play but generally hold to themes that can be tested against and built upon. Themes such as the quantity of proppant, longer lateral length, or the number of stages can be directly tied to increased productivity. However, there are diminishing returns on these investment activities for which each operator, within a given play, will be required to identify and mitigate against. This is especially true as the industry steps in and begins developing new tight oil plays. In their nascent stages, these plays may have limited well penetrations and, as a result, limited geological and performance data from which to extrapolate. Pulling together an understanding of where the industry currently resides in terms of how to exploit these resources can provide a boost in terms of working towards greatly improved well completions. In 2019, the US EIA estimated that nearly 8 million barrels of oil per day were produced from tight oil reservoirs in the United States (US EIA, 2020). This represents over 60% of the domestic crude production, originating from multiple reservoirs in the Permian Basin (TX) as well as the Bakken (MT, ND), Eagle Ford (TX), Niobrara (CO, WY), and Anadarko Basin (OK) formations, among others. As such, there are 1,000s of wells across these numerous tight oil plays that can relate an informative story. To build this story, the interplay of geology, well spacing, lateral length, and stimulation, all critical to economic success, will be explored. This paper proposes to look back at these mature tight oil (and gas) basins and bring forth an understanding of what lessons can be applied to the emerging Powder River Basin tight oil reservoirs (Mowry and the Turner/Frontier). The authors will delve into the four broad topics of geology, well spacing, lateral length, and stimulation, highlighting case studies to demonstrate those lessons from established tight oil plays that will underpin planned activities at a Field Laboratory Test Site in the southern Powder River Basin.

02 PETROLEUM↗
DOE OSTI2022

On the Quantitative CO 2 Subsurface Monitoring: Rock Physics for CO 2 Storage and CO 2 EOR

Paper presented at 16th International Conference on Greenhouse Gas Control Technologies (GHGT-16), October 23–27, 2022, Lyon, France. Rock physics is key to understanding the feasibility of monitoring and the actual monitoring of the location and volume of CO 2 in the subsurface. Examples from the Broom Creek Formation of the Williston Basin in North Dakota and the Muddy Formation of the Powder River Basin in Montana and Wyoming are used to show the effect of geology and injection of CO 2 on the velocity and density of reservoir rocks.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Microstructural diversity and digestion yields of select bituminous and subbituminous coals as raw material candidates for carbon fiber precursor production

Here, this work investigates the use of coals as raw materials for carbon fiber precursor production as a new alternative to coal utilization. Coal being a highly complex and heterogeneous material with different macerals and minerals complicates this task. Extensive microstructural characterization as well as preliminary digestion studies are performed on three bituminous coals (Herrin and Springfield from the Illinois Basin and the Blue Gem from the Central Appalachians) and one subbituminous coal from the Powder River Basin (Monarch), as raw material candidates. The subbituminous coal was richer in oxygen, lower in sulfur, and had a higher volatile matter yield. Microstructural investigations were performed using X-ray diffraction, X-ray/neutron computed tomography, scanning electron microscopy with energy dispersive spectroscopy, and petrology. Mild solvent extraction studies were conducted using creosote and decant oil as solvents in microreactors. The extraction yield was sensitive to temperature and time (350 to 450 °C between 30 and 120 mins.) for both creosote and decant oil digestions. While the Blue Gem coal had more desirable microstructural properties with less mineral content and cleaner macerals, it had the lowest coal conversion to quinoline soluble ‘liquid’ (of the bituminous coals). The lower coal conversion yield was hypothesized to be connected to the lack of FeS2 which could act as a catalyst when Fe is liberated from the structure under solvent extraction conditions. The Herrin and Springfield coals revealed similar microstructures and coal conversion efficiencies (higher than Blue Gem). These coals were the most promising candidates for further examination from this first approximations study. The subbituminous Monarch coal, however, was deemed less suitable due to poor coal conversion and less desirable microstructures. Additionally, the presented results with combined microstructural data from multiple length scales established a framework necessary for a first approximations study in this new coal utilization approach.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

On a Unified Core Characterization Methodology to Support the Systematic Assessment of Rare Earth Elements and Critical Minerals Bearing Unconventional Carbon Ores and Sedimentary Strata

A significant gap exists in our understanding and ability to predict the spatial occurrence and extent of rare earth elements (REE) and certain critical minerals (CM) in sedimentary strata. This is largely due to a lack of existing, systematic, and well-distributed REE and CM samples and analyses in United States sedimentary basins. In addition, the type of sampling and characterization performed to date has generally lacked the resolution and approach required to constrain geologic and geographic heterogeneities typical of subsurface, mineral resources. Here, we describe a robust and systematic method for collecting core scale characterization data that can be applied to studies on the contextual and spatial attributes, the geologic history, and lithostratigraphy of sedimentary basins. The methods were developed using drilled cores from coal bearing sedimentary strata in the Powder River Basin, Wyoming (PRB). The goal of this effort is to create a unified core characterization methodology to guide systematic collection of key data to achieve a foundation of spatially and geologically constrained REEs and CMs. This guidance covers a range of measurement types and methods that are each useful either individually or in combination to support characterization and delineation of REE and CM occurrences. The methods herein, whether used in part or in full, establish a framework to guide consistent acquisition of geological, geochemical, and geospatial datasets that are key to assessing and validating REE and CM occurrences from geologic sources to support future exploration, assessment, and techno-economic related models and analyses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Development of coal-derived carbon-based structural unit as a potential new building material

Coal combustion for energy has not only wasted the hydrogen-rich volatile matters but also results in CO 2 emission causing serious environmental issues. An integrated coal pyrolysis and solvent extraction process under elevated temperatures in an inert atmosphere is implemented to convert as-mined coal from Wyoming Powder River Basin to functional carbon elements such as pyrolysis char (PC). This paper presents the development and fabrication of new carbon-based structural unit (CSU) using pulverized PC and two coal-derived pitches (mesophase pitch and tar pitch) to attain high compressive strength greater than 30 MPa, low thermal conductivity less than 0.30 W/m.K, and low density less than 1.25 g/cm 3 . CSUs have the potential to overcome the current challenges with cement and concrete through pressurized fabrication followed by carbonization. This study aims to develop CSU with nearly 100% coal-derived carbon material for structural application in buildings. The effects of pressing pressures, carbonization temperatures, and binder contents on the density and mechanical and thermal properties of CSU samples are investigated. The study concludes that mesophase pitch produces a better performance of CSU samples, a combination of 100 MPa pressing pressure and carbonization temperature of 900 ⁰C yields the highest compressive strength, and a 25% MP content is recommended for low-cost CSU fabrication. Furthermoer, CSU has a much lower density, lower thermal conductivity, higher compressive strength, and higher strength-to-density ratio than normal concrete.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Geo-Data Science Method for Assessing Unconventional Rare-Earth Element Resources in Sedimentary Systems

Abstract Rare-earth elements (REEs) supply raw materials that constitute many of our modern critical infrastructure, defense, technology, and electrification needs. Despite REE accumulations occurring in conventional bedrock and ion-adsorption deposits sourced from weathering of igneous rocks, unconventional host materials such as coal and related sedimentary strata have been identified as promising sources of REEs to meet growing demand. To maximize the potential of unconventional resources such as REE-coal systems, new approaches are needed overcome challenges from mineral systems with no known deposits and areas with sparse geochemical data. This article presents a systematic knowledge-data resource assessment method for predicting and identifying REE resource potential and occurrence in these unconventional systems. The method utilizes a geologic and geospatial knowledge-data approach informed and guided by REE accumulation mechanisms to systematically assess and identify areas of higher enrichment. An assessment of the Powder River Basin is presented as a test case to demonstrate the method workflow and results. The key output is a potential enrichment score map reported with varying confidence levels based on the amount of supporting evidence. Results from the test case indicate several locations with promising potential for different types of coal-REE deposits, demonstrating the viability of the method for exploration and assessment of unconventional REE resources. The method is flexible by design and, with sufficient applicable knowledge and data, can be adapted for assessing critical mineral systems in other sedimentary systems as well.

58 GEOSCIENCES↗
DOE OSTI2022

Investigation of enhanced CO 2 storage in deep saline aquifers by WAG and brine extraction in the Minnelusa sandstone, Wyoming

Geological CO 2 sequestration in deep saline aquifers has been extendedly investigated to reach the goal of carbon neutral as large amount of CO 2 can be reduced in a short time. Here, this study investigates the feasibility of water-alternating-gas (WAG) injection and brine extraction on enhancing CO 2 storage in a target deep saline aquifer, Minnelusa Sandstone in the Powder River Basin (PRB) of Wyoming. An integrated numerical model is developed to account for four scenarios: (1) CO 2 continuous injection (CI) through one injection well, (2) WAG injection through one injection well, (3) CO 2 CI through one injection well and brine extraction through one producer, (4) WAG injection through one injection well and brine extraction through one producer. Simulation results suggest that WAG injection and brine extraction corporately make it possible to enhance CO 2 injectivity while securing CO 2 storage safety. For instance, WAG injection considerably reduces structural trapping contribution while enhances dissolved and residual trapping contributions. As for brine extraction, it can decrease the maximum averaged reservoir pressure by 37% and 22% for CI and WAG injection, respectively. Besides, sensitive analyses of the operational parameters for the fourth scenarios are performed. Results reveal that, when the amount of total CO 2 injection has been predetermined, CO 2 injection time and rate within each period of WAG should be small whereas it is preferable to have large water injection time and rate. This is to secure desirable dissolved and residual trapping contributions (store CO 2 with safety). Sensitive degree results confirm that CO 2 injection rate, water injection time, and CO 2 injection time of WAG injection exhibit significant effects on CO 2 storage whereas the impacts of producer bottom-hole pressure (BHP), water injection rate, and CO 2 -water injection time are relatively weaker. This study not only sheds light on achieving double-win goal: enhance CO 2 injectivity and store CO 2 with safety, but also can be a critical reference for other CO 2 storage in deep saline aquifers.

58 GEOSCIENCES↗
DOE OSTI2022

Effect of natural carbon filler on thermo-oxidative degradation of thermoplastic-based composites

Here thermo-oxidative degradation of thermoplastic-based composites filled with two types of carbon filler including bituminous (Pittsburgh No.8, P8) and sub-bituminous (Powder River Basin, PRB) coals were investigated using differential scanning calorimetry (DSC) and thermogravimetric analysis. Oxidation induction time (OIT) and activation energy (AE) for coal plastic composites (CPCs), HDPE, and commercially available wood plastic composites (WPCs) were determined using isothermal and isoconversional kinetic methods. OIT values for CPC increased with coal content, indicating higher thermo-oxidative stability. AE values obtained using isothermal method were 52–116 kJ/mol for all CPC formulations, 32 kJ/mol for HDPE, and 33–114 kJ/mol for WPCs. AEs for CPCs obtained using isoconversional methods were not constant but rather dependent on the degree of degradation with CPC/ P8 coal possessing higher overall AE. Incorporating coal into HDPE increased thermo-oxidative stability of the resulting composite, indicating coal potentially acts as a natural primary and secondary antioxidant for polymer materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Detailed Characterization of Vitrinite-Rich Subbituminous and Bituminous Coals for Utilization in Carbon Fiber Precursor Production

Chemical structures of candidate coals (one subbituminous coal from the Powder River Basin and three bituminous Eastern US coals) were examined for potential low-cost carbon fiber precursor production. Here, the structural evaluation examined the carbon skeleton ( 13 C nuclear magnetic resonance (NMR) and high-resolution transmission electron microscopy (HRTEM)), the heteroatom functionality (X-ray photoelectron spectroscopy (XPS) Fourier transform infrared spectroscopy (FTIR) and NMR), the structural ordering and distribution of PAH sizes (HRTEM), and an estimation of the molecular weight distribution (laser desorption ionization mass spectrometry, LDIMS). The molecular compositional distributions were also evaluated for a mixed solvent extract (atmospheric pressure photoionization, 21 T Fourier transform ion cyclotron resonance mass spectrometry, FT-ICR MS). Significant structural differences existed between the subbituminous and bituminous coals, as expected with coalification (with the bituminous coals having a higher carbon content, lower oxygen content, higher aromaticity values, larger cluster sizes, and so forth). While the bituminous coals were similar in structure (close in rank with Blue Gem being hvAb and the rest being hvBb), structural differences were still evident. Specifically, structural similarities were evident for the average properties of Herrin and Springfield coals: same rank, similar moisture, and volatile matter yields, along with similar aromaticity and carbon and hydrogen content. However, significant structural differences were observed at the molecular level by 21 T FT-ICR MS, which showed that the Springfield coal was structurally more complex. Specifically, 21740, 16931, 30190, and 12982 unique elemental compositions were identified for the Monarch, Herrin, Springfield, and Blue Gem coals, further illustrating the complexity of the coal.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Structural Characteristics and Graphitizability of Tars from Thermal versus Microwave Plasma Pyrolysis of Coals

This work investigates the structural characteristics and graphitizability of tars obtained from thermal pyrolysis versus the reactive microwave (MW) plasma pyrolysis of coals. Powder River Basin (PRB) coal tars obtained by thermal pyrolysis have been compared with tars obtained from MW plasma pyrolysis containing H 2 . To study the effect of coal rank and MW plasma environment, the PRB tars have been compared with Middle Kittanning (MK) coal tars obtained from an argon–hydrogen MW plasma (hp) and an argon-CO 2 MW plasma (cdp) environment. Fourier transform infrared spectroscopy has been used for investigating the structural differences among the tar samples. The tars have been graphitized (GR-) at 2500 °C and the graphitic quality assessment has been performed using X-ray diffraction and transmission electron microscopy. MW plasma-derived tars have higher aromaticity, lower condensation, and lower oxygenated molecules compared to thermally derived tars. These advantageous features of MW plasma-derived tars lead to the formation of crystallites several times larger than thermally derived tars after graphitization. When considering coal of the same rank (bituminous), the choice of the MW plasma environment has a substantial impact on the graphitic quality of the tars. The utilization of MW plasma containing H 2 leads to a significant increase in both the crystallite diameter (by 60%) and stacking height (by 40%) compared to MW plasma containing CO 2 . Furthermore, within the same MW plasma environment, the coal rank plays a significant role in determining the crystallite diameter and stacking height of the GR-tars. In particular, GR-MK tar obtained from hp exhibits a 135% larger crystallite diameter and 85% larger stacking height compared with GR-PRB tar obtained from hp. These findings demonstrate the potential to tailor the composition of coal-derived tars and consequently influence their graphitizability by adjusting the reactive environment during MW plasma treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Techno-Economic and Life Cycle Assessments for Sustainable Rare Earth Recovery from Coal Byproducts using Biosorption

Coal byproducts could be a promising feedstock to alleviate the supply risk of critical rare earth elements (REEs) due to their abundance and REE content. Herein, we investigated the economic and environmental potential of producing REEs from coal fly ash and lignite through an integrated process of leaching, biosorption, and oxalic precipitation on the basis of experimental data and modeling results. Two microbe immobilization systems (polyethylene glycol diacrylate (PEGDA) microbe beads and Si sol–gels) were examined for their efficiency in immobilizing Arthrobacter nicotianae to selectively recover REEs. Techno-economic analysis revealed that North Dakota lignite could be a profitable feedstock when Si sol–gel is used due to its high cell loading and REE adsorption capacity as well as high reuse cycles. Life cycle analysis revealed that Si sol–gel-based biosorption could be more environmental friendly than the prevailing REE production in China due to the use of less toxic chemicals. However, fly ash sourced from Powder River Basin coals was neither profitable nor environmentally sustainable, primarily due to low solubility of high-value scandium at an economical pulp density (100 g ash/L of acid solution). To further improve the proposed biotechnology, future research could focus on scandium recovery, leaching efficiency at a high pulp density, and reuse cycles of the immobilized microbes.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Activity-based, genome-resolved metagenomics uncovers key populations and pathways involved in subsurface conversions of coal to methane

Microbial metabolisms and interactions that facilitate subsurface conversions of recalcitrant carbon to methane are poorly understood. We deployed an in situ enrichment device in a subsurface coal seam in the Powder River Basin (PRB), USA, and used BONCAT-FACS-Metagenomics to identify translationally active populations involved in methane generation from a variety of coal-derived aromatic hydrocarbons. From the active fraction, high-quality metagenome-assembled genomes (MAGs) were recovered for the acetoclastic methanogen, Methanothrix paradoxum, and a novel member of the Chlorobi with the potential to generate acetate via the Pta-Ack pathway. Members of the Bacteroides and Geobacter also encoded Pta-Ack and together, all four populations had the putative ability to degrade ethylbenzene, phenylphosphate, phenylethanol, toluene, xylene, and phenol. Metabolic reconstructions, gene analyses, and environmental parameters also indicated that redox fluctuations likely promote facultative energy metabolisms in the coal seam. The active "Chlorobi PRB" MAG encoded enzymes for fermentation, nitrate reduction, and multiple oxygenases with varying binding affinities for oxygen. "M. paradoxum PRB" encoded an extradiol dioxygenase for aerobic phenylacetate degradation, which was also present in previously published Methanothrix genomes. Finaly, these observations outline underlying processes for bio-methane from subbituminous coal by translationally active populations and demonstrate activity-based metagenomics as a powerful strategy in next generation physiology to understand ecologically relevant microbial populations.

59 BASIC BIOLOGICAL SCIENCES↗