Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Positive Transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Intercontinental time and frequency transfer using a global positioning system timing receiver

The Deep Space Network (DSN) has a requirement to maintain knowledge of the frequency offset between DSN stations within 3 x 10 to the -13th power and time offset within 10 microseconds. It is further anticipated that in the 1987-1990 era the requirement for knowledge of time offset between DSN stations will be less than 10 nanoseconds. The Jet Propulsion Laboratory (JPL) is using the Global Positioning System (GPS) Space Vehicles, as a development project, to transfer time and frequency over intercontinental distances between stations of the DSN and between the DSN and other agencies. JPL has installed GPS timing receivers at its tracking station near Barstow, California and at its tracking station near Madrid, Spain. The details of the experiment and the data are reported. There is a discussion of the ultimate capabilities of these techniques for meeting the functional requirements of the DSN.

Clements, P. A.↗
NASA NTRS1983

Intercontinental time and frequency transfer using a global positioning system timing receiver

The DSN has a requirement to maintain knowledge of the frequency offset between DSN stations with 3 x 10 to the minus 13th power and time offset within 10 microseconds. It is further anticipated that in the 1987-1990 era the requirement for knowledge of time offset between DSN stations will be less than 10 nanoseconds. JPL is using the Global Positioning System (GPS) Space Vehicles, as a development project, to transfer time and frequency over intercontinental distances between stations of the DSN and between the DSN and other agencies. JPL has installed GPS timing receivers at its tracking station near Barstow, California, and at its tracking station near Madrid, Spain. The details of the experiment and the data are reported. There is a discussion of the ultimate capabilities of these techniques for meeting the functional requirements of the DSN.

Clements, P. A.↗
NASA NTRS1959

Influence of Large Positive Dihedral on Heat Transfer to Leading Edges of Highly Swept Wings at Very High Mach Numbers

A geometric study has been made of some of the effects of dihedral on the heat transfer to swept delta wings. The results of this study show that the incorporation of large positive dihedral on highly swept wings can shift, even at moderately low angles of attack, the stagnation-line heat-transfer problem from the leading edges to the axis of symmetry (ridge line). An order-of-magnitude analysis (assuming laminar flow) indicates conditions for which it may be possible to reduce the heating at the ridge line (except in the vicinity of the wing apex) to a small fraction of the leading-edge heat transfer of a flat wing at the same lift. Furthermore, conditions are indicated where dihedral reduces the leading-edge heat transfer for angles of attack less than those required to shift the stagnation line from the leading edge to the ridge line.

Cooper, Morton↗
NASA NTRS2007

System and method for improved rotor tip performance

The present invention discloses systems and methods for the performance enhancement of rotary wing aircraft through reduced torque, noise and vibration. In one embodiment, a system includes a sail having an aerodynamic shape positioned proximate to a tip of the rotor blade. An actuator may be configured to rotate the sail relative to the blade tip. a A control system receives information from a rotorcraft system and commands the actuator to rotate the sail to a predetermined favorable rotor blade operating condition. In another embodiment, a method includes configuring the rotorcraft in a selected flight condition, communicating input signals to a control system operable to position sails coupled to tips of blades of a rotor assembly, processing the input signals according to a constraint condition to generate sail positional information, and transferring the sail positional information to the sail.

Bussom, Richard↗
NASA NTRS2010

System and method for improved rotor tip performance

Embodiments of systems and methods for enhancing the performance of rotary wing aircraft through reduced torque, noise and vibration are disclosed. In one embodiment, a method includes configuring the rotorcraft in a selected flight condition, communicating input signals to a control system operable to position sails coupled to tips of blades of a rotor assembly, processing the input signals according to a constraint condition to generate sail positional information, and transferring the sail positional information to the sail. Alternately, input signals may be communicated to a control system operable to position a plurality of sails, each sail having an aerodynamic shape and positioned proximate to a tip portion of the rotor blade. The input signals may be configured to rotate each sail about a longitudinal axis into a corresponding pitch angle independently of the other sails.

Bussom, Richard↗
NASA NTRS1991

Generalized proportional-plus-derivative compensators for a class of uncertain plants

Controller design for a class of systems consisting of a positive-real transfer function P(s) followed by an integrator is considered. A generalized proportional-plus-derivative compensator is proposed for robustly stabilizing a class of uncertain plants represented by a positive-real transfer function followed by an integrator. The novel feature of the proposed compensator is that the proportional and rate gains used are transfer functions rather than constants, which allows more design freedom and offers the potential for better performance with guaranteed robust stability. The results obtained are for single-input/single-output systems. If the results are extended to the multivariable case, they will then be applicable to realistic flexible spacecraft.

Joshi, Suresh M.↗
NASA NTRS1995

HST observations of the core of the globular cluster NGC 6624

We have used the Faint Object Camera (FOC) on the Hubble Space Telescope (HST) to observe three fields near the center of the post-collapse globular cluster NGC 6624 in B and V. We use individual stellar positions and a maximum-likelihood technique to measure a position for the cluster center. We then transfer this position and the position of the x-ray source 4U 1820-30 to right ascension and declination, and correct an error of 1.8 sec in an earlier paper. From star counts, we obtain a density profile, with a power-law cusp of slope -0.84 +/- 0.16. No flat core is evident. We construct color-magnitude diagrams down to the main-sequence turnoff near the cluster center, and more than three magnitudes below the turnoff in the outermost field at r = 28 sec. The former diagram reveals a central population of blue stragglers, which has not previously been observed in this cluster. These blue stragglers are quite similar in specific frequency to those recently observed by HST in the core of 47 Tuc, and their presence adds to the growing evidence of stellar interactions in dense globular-cluster cores.

Sosin, Craig↗
NASA NTRS1985

First results of GPS time transfer to Australia

A Global Positioning System time transfer unit built by NBS under contract to JPL was installed at Tidbinbilla Deep Space Communications Complex of the NASA Deep Space Network in June 1983. It has been used to estimate the relationship to UTC(USNO MC) of the Tidbinbilla frequency and time system TID(FTS) based on a hydrogen maser, and thence to estimate the performance of the Australian free-running time scale UTC(AUS). Data from the first three months has been analyzed three ways: by two-hop common view using JPL as intermediary; by long-arc interpolation of measurements against space vehicle clocks; and by long-arc interpolation of GPS-Time results. Residuals from a single quadratic fit through three months of UTC(USNO MC) - TID (FTS) results were white noise with standard error 15 ns, and a flying clock measurement gave 70 ns agreement. A straight line fit through results UTC(USNO MC) - UTC (AUS) gave 90 ns standard error and 120 bns agreement. It is proposed to use the GPS measurements to steer UTS(AUS) to UTC(BIH), and to rename the existing time scale TA(AUS).

Luck, J. M.↗
NASA NTRS1975

K/S Lambert problem

The Lambert problem in orbital mechanics is formulated in Kustaanheimo/Stiefel variables. The problem is to determine the required energy and the value of the generalized eccentric anomaly such that a particle at the initial position vector will transfer to the final position vector in a physical time interval. The fictitious time solution results in two nonlinear equations in the two unknowns, energy and fictitious time. The generalized eccentric anomaly solution, however, results in only one nonlinear equation in the one unknown, the eccentric anomaly. This simplification is possible because the energy equation is separable in the eccentric anomaly formulation.

Jezewski, D. J.↗
NASA NTRS1968

Vacuum-jacketed transfer line installation technique

Rolling-type spacers in the form of steel balls retained in appropriate sleeves affixed at intervals to the exterior of the transfer line facilitate the installation of a vacuum-jacketed line. They act as standoffs to position the transfer line concentrically within the vacuum jacket line.

Bowers, W. M.↗
NASA NTRS1999

How an Electron Beam (Eventually) Penetrates Ceramic Cloth

In anticipation of the International Space Welding Experiment (ISWE) the effect of an electron beam was investigated on Nextel AF-62 ceramic cloth designed to withstand temperatures up to 1427 C. It was anticipated that the cloth would take a static charge that would repel the beam and remain undamaged. It was found that after some seconds the impinging beam penetrated penetrated the cloth. Further, the penetration time went up significantly both at longer and at closer standoff distances. A tentative explanation appears to fit the observed facts. The electrons in the beam generate positive ions by collisions with the contaminant gas molecules in the vacuum chamber. The positive ions transfer a small but significant fraction of the beam power to the cloth. Under the impingement of the positive ions the cloth heats up until sufficient outgassing occurs to initiate arcing. Once arcing occurs the full beam power impinges on the cloth and, almost instantaneously, burns a hole.

Nunes, A. C., Jr.↗
NASA NTRS1988

On the design of the dissipative LQG-type controllers

The design of dissipative linear-quadratic-Gaussian-type compensators for positive real plants is considered. It is shown that if the noise covariance matrices (used as weighting matrices) satisfy certain conditions, the compensator has a strictly positive real transfer function matrix. The stability of the resulting closed-loop system is guaranteed regardless of modeling errors as long as the plant remains positive real. In view of this property, the controller is expected to be useful for vibration suppression in large, flexible space structures.

Lozano-Leal, R.↗
NASA NTRS1984

First Results of GPS Time Transfer to Australia

A global positioning system (GPS) time transfer unit was installed at Tidbinbilla Deep Space Communications Complex of the DSN in June 1983. It was used to estimate the relationship to UTC(USNO MC) of the Tidbinbilla frequency and time system TID(FTS) based on a hydrogen maser, and to estimate the performance of the Australian free-running time scale UTC(AUS). Data from the first 3 months were analyzed three ways: by two-hop common view using JPL as intermediary; by long-arc interpolation of measurements against space vehicle clocks; and by long arc interpolation of GPS-Time results. Residuals from a single quadratic fit through 3 months of UTC(USNO MC) -TID(FTS) results were white noise with standard error 15 ns, and a flying clock measurement gave 70 ns agreement. A straight line fit through results UTC(USNO MC) - UTC(AUS) gave 90 ns standard error and 120 ns agreement. It is proposed to use the GPS measurements to steer UTC(AUS) to UTC(BIH), and to rename the existing time scale TA(AUS).

Mck.luck, J.↗
NASA NTRS1972

General and specific factors in the intersensory transfer of form.

This study assessed the relative contributions of specific and nonspecific components to intersensory transfer between vision and touch. A paired-associate paradigm was used in which visual metric figures and their tactual analogs served as stimuli, and familiar adjectives were the responses. Positive intersensory transfer, characterized by symmetry across modalities was obtained. The contribution of nonspecific learning to this effect was negligible. Intersensory transfer was found to be less efficient than the empirically determined maximum level of intrasensory transfer possible in this task.

Clark, J. L.↗
NASA NTRS1997

Liquid air mixing system

A device for mixing liquid nitrogen and liquid oxygen to form liquid air. The mixing device consists of a tube for transferring liquid oxygen positioned within a tube for transferring liquid nitrogen. Supply vessels for liquid oxygen and liquid nitrogen are equally pressurized and connected to the appropriate tubes. Liquid oxygen and nitrogen flow from the supply vessels through the respective tubes and are mixed to form liquid air upon exiting the outlets of the tube. The resulting liquid air is transferred to a holding vessel.

Martin, Robert B.↗
NASA NTRS1979

Time transfer with the NAVSTAR global positioning system

The NAVSTAR global positioning system (GPS) was evaluated and tested in terms of performance. A variety of operational and technical issues were addressed which characterize the performance of the system. The precision and accuracy of the transfer of GPS time to the static user were measured and a base of information was developed that would support and expediate efforts to develop and evaluate specialized user equipment to exhibit the operational GPS's precision timing characteristics.

Roth, B. D.↗