Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Porous Polymer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Photolytic synthesis and hydrophobization of plates of porous polymer material based on dimethacrylate oligomer MDP-2

Plates of poly-MDP-2 porous material with a characteristic size of inhomogeneities of 0.3, 0.7, 2.5, 10, and 20 µm were synthesized by the photopolymerization technique. The conditions for the photolytic modification of the hydrophilic/hydrophobic properties of poly-MDP-2 by the graft copolymerization method under visible light irradiation were selected using 9,10-phenanthrenequinone as a photoinitiator and isodecyl methacrylate as a modifying monomer. It is shown on the samples with an inhomogeneity size of 10 µm that the stable hydrophobization effect (contact angle of water droplet θ = 135°) is achieved at a photoinitiator concentration of 2.4 · 10{sup −3} mol L{sup −1} and an irradiation time of the sample in the modifying solution of 1 h. The effect of photolytic hydrophobization increases with an increase in the size of inhomogeneities in the porous polymer material and reaches θ = 140° for inhomogeneities ∼20 µm in size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of porous polymer gas chromatographic packings for atmospheric analysis of extraterrestrial bodies

Measurement of the permanent gases in the atmospheres of mission targets is a major objective. A 16 meter long Porapak N column was used on the Venus probe and required a rather high carrier gas flow rate. The researchers have, therefore, surveyed commercial porous polymer types which had some ability to resolve nitrogen, oxygen, argon and carbon monoxide gases. Porapaks N and Q appeared superior to most. Batch to batch variation, however, was quite wide, so the researchers learned how to synthesize porous polymer and investigated some of the factors affecting the separations. A polymer was synthesized which was superior to all commercial products and allowed at least a 50% reduction in length and flow rate of carrier gas. Similar studies were made concerning the separation of hydrocarbons and new porous polymers have been synthesized which represent significant improvements in time of analysis, column, and carrier gas flow rate.

Pollock, G. E.↗

Evaluation of amine-incorporated porous polymer networks (aPPNs) as sorbents for post­combustion CO 2 capture

This is the final report for the TAMU project “Evaluation of amine-incorporated porous polymer networks (aPPNs) as sorbents for post­combustion CO 2 capture.” During this project, a team consisting of the Zhou group at Texas A&M University and framergy Inc. were tasked with developing a porous polymer network (PPN) based sorbent system for CO 2 capture applications. The three year project was divided up into 3 individual budget periods. During budget period 1 the team develop multiple novel PPN based sorbents and began initial CO 2 capture experiments. During the course of this research the team determined that two sorbents were the standout targets, PPN-150-DETA and PPN-151-DETA. During budget period 2 the team further developed these two materials, gathering data to determine their performance under both wet and dry conditions, determine their CO 2 adsorption capacities, heats of adsorption, regenerative energy demands, and mechanical attrition. In addition, budget period 2 saw the development of 50 g and 250 g batches of both sorbents, while still maintaining >0.10 g/g uptake capacity under wet gas conditions. Following budget period 2 testing, the team opted to continue on with PPN-151-DETA due to its superior CO 2 cycling capabilities, with a consistent uptake capacity observed over 30 cycles at the lab scale. During budget period 3 the team further developed the material at scale, producing a 1 kg batch of material. Following this, the team performed multiple long-term cycling tests in the presence and absence of SO 2 using a 100 mL column. During this testing the team observed that the material loses significant uptake capacity due to SO 2 , as well as shows some level of DETA loss, which resulted in instrument breakdown and a request for a no-cost extension. The team was able to finalize the experiment with a test using a 1.5 L column in the absence of SO 2 , with the final cycle uptakes being around 0.035 g/g due to the need to harshly activate the material to prevent DETA desorption.

20 FOSSIL-FUELED POWER PLANTS↗

Synthesis of a further improved porous polymer for the separation of nitrogen, oxygen, argon, and carbon monoxide by gas chromatography

A further improvement has been made in the synthesis of an N-type porous polymer for the separation of permanent gases. Changing the ratios of reactants and diluting the Hi-DVB with styrene led to a porous polymer gas chromatographic packing which is superior to commercial products and to the author's own previously reported custom-made polymer.

Pollock, G. E.↗

Cation-Dependent Stabilization of Electrogenerated Naphthalene Diimide Dianions in Porous Polymer Thin Films and Their Application to Electrical Energy Storage

Porous polymer networks (PPNs) are attractive materials for capacitive energy storage because they offer high surface areas for increased double-layer capacitance, open structures for rapid ion transport, and redox-active moieties that enable faradaic (pseudocapacitive) energy storage. Here we demonstrate a new attractive feature of PPNs—the ability of their reduced forms (radical anions and dianions) to interact with small radii cations through synergistic interactions arising from densely packed redox-active groups, only when prepared as thin films. When naphthalene diimides (NDIs) are incorporated into PPN films, the carbonyl groups of adjacent, electrochemically generated, NDI radical anions and dianions bind strongly to K+, Li+, and Mg2+, shifting the formal potentials of NDI’s second reduction by 120 and 460 mV for K+ and Li+-based electrolytes, respectively. In the case of Mg2+, NDI’s two redox waves coalesce into a single two-electron process with shifts of 240 and 710 mV, for the first and second reductions, respectively, increasing the energy density by over 20 % without changing the polymer backbone. In contrast, the formal reduction potentials of NDI derivatives in solution are identical for each electrolyte, and this effect has not been reported for NDI previously. This study illustrates the profound influence of the solid-state structure of a polymer on its electrochemical response, which does not simply reflect the solution-phase redox behavior of its monomers.

36 MATERIALS SCIENCE↗

Aromatic porous polymer network membranes for organic solvent nanofiltration under extreme conditions

Aromatic porous polymer networks (PPNs) are promising candidate materials for organic solvent nanofiltration (OSN) membranes, in which molecular-sieving selectivity, high permeability, and chemical/structural stability can be integrated. In this work, aromatic PPN membranes p-PPN, m-PPN and tri-PPN are fabricated by in situ aldol triple condensation cross-linking. These membranes demonstrate high stability, permeability and sharp selectivity in OSN, thanks to the aromatic nature of the backbone, high surface area (up to 1235 m 2 g -1 ), and narrowly distributed pore sizes. They possess a high organic solvent permeability so that a good permeance is achieved despite a thickness of over 100 μm. The molecular weight cut-off and molecular weight retention onset of these membranes are ~600 g mol -1 and 350 g mol -1 , respectively, making it possible to efficiently separate molecules from a complex mixture composed of compounds with only marginally different molecular weights. As a result of the highly stable nature of the aromatic backbones, these PPN membranes show retained structural integrity and OSN performance in the presence of either a strong acid or strong base for over 50 h. The extraordinary stability integrated with excellent permeability and selectivity renders these PPN membranes promising candidates for challenging OSN applications under extreme conditions.

36 MATERIALS SCIENCE↗

Method for dialysis on microchips using thin porous polymer membrane

Laser-induced phase-separation polymerization of a porous acrylate polymer is used for in-situ fabrication of dialysis membranes inside glass microchannels. A shaped 355 nm laser beam is used to produce a porous polymer membrane with a thickness of about 15 .mu.m, which bonds to the glass microchannel and forms a semi-permeable membrane. Differential permeation through a membrane formed with pentaerythritol triacrylate was observed and quantified by comparing the response of the membrane to fluorescein and fluorescently tagging 200 nm latex microspheres. Differential permeation was observed and quantified by comparing the response to rhodamine 560 and lactalbumin protein in a membrane formed with SPE-methylene bisacrylamide. The porous membranes illustrate the capability for the present technique to integrate sample cleanup into chip-based analysis systems.

36 MATERIALS SCIENCE↗

Porous polymer networks and ion-exchange media and metal-polymer composites made therefrom

Porous polymeric networks and composite materials comprising metal nanoparticles distributed in the polymeric networks are provided. Also provided are methods for using the polymeric networks and the composite materials in liquid- and vapor-phase waste remediation applications. The porous polymeric networks, are highly porous, three-dimensional structures characterized by high surface areas. The polymeric networks comprise polymers polymerized from aldehydes and phenolic molecules.

36 MATERIALS SCIENCE↗

Porous polymer networks and ion-exchange media and metal-polymer composites made therefrom

Porous polymeric networks and composite materials comprising metal nanoparticles distributed in the polymeric networks are provided. Also provided are methods for using the polymeric networks and the composite materials in liquid- and vapor-phase waste remediation applications. The porous polymeric networks, are highly porous, three-dimensional structures characterized by high surface areas. The polymeric networks comprise polymers polymerized from aldehydes and phenolic molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The development of a high-throughput gradient array apparatus for the study of porous polymer networks.

A gradient array apparatus was constructed for the study of porous polymers produced using the process of chemically-induced phase separation (CIPS). The apparatus consisted of a 60 element, two-dimensional array in which a temperature gradient was placed in the y-direction and composition was varied in the x-direction. The apparatus allowed for changes in opacity of blends to be monitored as a function of temperature and cure time by taking images of the array with time. The apparatus was validated by dispense a single blend composition into all 60 wells of the array and curing them for 24 hours and doing the experiment in triplicate. Variations in micron scale phase separation were readily observed as a function of both curing time and temperature and there was very good well-to-well consistency as well as trial-to-trial consistency. Poragen of samples varying with respect to cure temperature was removed and SEM images were obtained. The results obtained showed that cure temperature had a dramatic affect on sample morphology, and combining data obtained from visual observations made during the curing process with SEM data can enable a much better understanding of the CIPS process and provide predictive capability through the relatively facile generation of composition-process-morphology relationships. Data quality could be greatly enhanced by making further improvements in the apparatus. The primary improvements contemplated include the use of a more uniform light source, an optical table, and a CCD camera with data analysis software. These improvements would enable quantification of the amount of scattered light generated from individual elements as a function of cure time. In addition to the gradient array development, porous composites were produced by incorporating metal particles into a blend of poragen, epoxy resin, and crosslinker. The variables involved in the experiment were metal particle composition, primary metal particle size, metal concentration, and poragen composition. A total of 16 different porous composites were produced and characterized using SEM. In general, the results showed that pore morphology and the distribution of metal particles was dependent on multiple factors. For example, the use of silver nanoparticles did not significantly affect pore morphology for composites derived from decanol as the poragen, but exceptionally large pores were obtained with the use of decane as the poragen. With regard to the effect of metal particle size, silver nanoparticles were essentially exclusively dispered in the polymer matrix while silver microparticles were found in pores. For nickel particles, both nanoparticles and microparticles were largely dispersed in the polymer matrix and not in the pores.

36 MATERIALS SCIENCE↗

Amine-incorporated porous polymer networks (PPNs) as sorbents for post-combustion CO2 capture

The Zhou group has long been interested in the development of CO2 capture sorbents, having investigated both metal-organic frameworks (MOFs) and porous polymer networks (PPNs). In this work, we have begun an investigation of a new generation of PPN based sorbents. These PPN sorbents are low cost alternatives to expensive MOF sorbents, while achieving the low heats of adsorption necessary for economic CO2 capture.

post-combustion carbon capture, porous polymer net↗

Monodisperse porous polymer particles containing macrocyclic ether as a new class of sorbent for SR(II) separation

Strontium{sup 90} is one of the typical fission products that may be found in high level liquid waste (HLLW). Separation of Sr{sup 90} prior to the vitrification is beneficial to the final treatment of solid radioactive waste. In this study, a new class of sorbent for Sr(II) was developed by loading the macrocyclic ether DtBuCH18C6 into the monodisperse porous polymer particles (MPPPs). The MPPPs are well-known as a promising chromatographic material due to the uniform particle size, porous morphology, good compatibility with organic extractants, and rigid matrix. The structure and micro-morphology of the sorbent particles were characterized. The adsorption behavior towards Sr(II) in HNO{sub 3} media was investigated by both batch and column experiments. High adsorption efficiency and selective separation of Sr(II) was obtained. The sorbent particles can be recycled for at least several times before obvious lose of the adsorption ability. This kind of sorbent possesses the potential to be used for strontium separation in radioactive liquid waste.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Porous Polymers as Universal Reversal Agents for Heparin Anticoagulants through an Inclusion–Sequestration Mechanism

Heparins are widely used anticoagulants for surgical procedures and extracorporeal therapies. However, all of them have bleeding risks. Protamine sulfate, the only clinically approved antidote for unfractionated heparin (UFH), has adverse effects. Moreover, protamine can only partially neutralize low-molecular-weight heparins (LMWHs) and is not effective for fondaparinux. In this report an inclusion–sequestration strategy for efficient neutralization of heparin anticoagulants by cationic porous supramolecular organic frameworks (SOFs) and porous organic polymers (POPs) is reported. Isothermal titration calorimetric and fluorescence experiments show strong binding affinities of these porous polymers toward heparins, whereas dynamic light scattering and zeta potential analysis confirm that the heparin sequences are adsorbed into the interior of the porous hosts. Activated partial thromboplastin time, anti-FXa, and thromboelastography assays indicate that their neutralization efficacies are higher than or as high as that of protamine for UFH and generally superior to protamine for LMWHs and fondaparinux, which is further confirmed by tail-transection model in mice and ex vivo aPTT or anti-FXa analysis in rats. Acute toxicity evaluations reveal that one of the SOFs displays outstanding biocompatibility. This work suggests that porous polymers can supply safe and rapid reversal of clinically used heparins, as protamine surrogates, providing an improved approach for their neutralization.

36 MATERIALS SCIENCE↗

Hyper-crosslinked β-cyclodextrin porous polymer: an adsorption-facilitated molecular catalyst support for transformation of water-soluble aromatic molecules

A hyper-crosslinked β-cyclodextrin porous polymer (BnCD-HCPP) was designed and synthesized facilely by β-cyclodextrin benzylation and subsequent crosslinking via a Friedel–Crafts alkylation route. The BnCD-HCPP shows an extremely high BET surface area, large pore volume, and high thermal stability, making it a highly efficient adsorbent for removal of aromatic pollutants from water. The adsorption efficiency in terms of distribution coefficient, defined as the ratio of adsorption capacity to equilibrium adsorbate concentration, ranged from 10 3 to 10 6 mL g -1 within a concentration of 0–100 ppm, one order of magnitude higher than that of other β-cyclodextrin-based adsorbents reported previously. The molar percentage of adsorbate to β-cyclodextrin exceeded 300%, suggesting that the adsorption occurred not only in the cyclodextrin cavities via a 1 : 1 complexation, but also in the nanopores of the BnCD-HCPP created during the hyper-crosslinking. The BnCD-HCPP can be further functionalized by incorporation of gold nanoparticles for catalytic transformation of adsorbed phenolic compounds such as 4-nitrophenol to 4-aminophenol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improving Alkylamine Incorporation in Porous Polymer Networks through Dopant Incorporation

The industrial scale capture of CO 2 from flue gas streams is becoming an increasingly important environmental issue. However, many of the existing CO 2 capture systems either have regenerative energy demands that are too high or are cost prohibitive. A promising solution is the utilization of functionalized solid sorbents, such as porous polymer networks (PPNs). PPNs are attractive due to their inherent structural stability, flexibility, high surface areas, and ability to incorporate various functional groups within the chemical scaffold. Herein, a low cost, scalable alternative to common carbon capture systems using a series of robust mesoporous melamine-formaldehyde resins (mPMFs) loaded with active alkylamine sorbents is presented, which is dubbed as the PPN-150 family. The variants within this material class are differentiated based on the incorporation of functionalized dopants; small molecules added at low molar percent concentrations to impart additional functionality into the PPN in order to achieve low cost noncovalent tethering of alkylamines. The cyanuric acid doped PPN-151-DETA (DETA = diethylenetriamine) demonstrate unique features such as improved cycling capacity and heat of adsorption. To show its scalability, PPN-151-DETA is successfully synthesized at the 250 g scale without loss of the sorbent properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemically Controllable Porous Polymer–Nanocrystal Composites with Hierarchical Arrangement Show Substrate Transport Selectivity

Functional organic–inorganic hybrid materials with tunable properties are useful across many application areas, ranging from gas storage to electronics, flame retardants, separations, and catalysis. Combining polymers, with a suite of functional groups and conformational flexibility, and inorganic nanoparticles, with tunable surface chemistry and composition, yields hybrids with novel functional properties. Specifically, in catalysis, control of the electronic environment at a metal interface is paramount in determining the catalytic properties. In this contribution, we describe a modular process to prepare porous polymer–nanocrystal (NC) composites in a hierarchical, multilayered synthesis, in which multiple parameters can be accurately tuned: polymer functional groups and the corresponding pore structure, the polymer layer thickness, and the NC size, shape, and composition. This process provides for a variety of controlled materials with high surface area, tunable chemistry, and thermal and chemical stabilities. Furthermore, we demonstrate their utility for shape- and size-selective catalytic conversions both in oxidation and hydrogenation reactions, where they show increased selectivity by orders of magnitude compared to conventional polymer-supported metal catalysts. In light of the high degree of control in the composite structure, this method allows for the design and realization of catalysts for several reactions and reaction environments and for nanomaterials with other applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗