Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polymer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

History Matching and Performance Prediction of a Polymer Flood Pilot in Heavy Oil Reservoir on Alaska North Slope

The first-ever polymer flood pilot to enhance heavy oil recovery on Alaska North Slope (ANS) is ongoing. After more than 2.5 years of polymer injection, significant benefit has been observed from the decrease in water cut from 65% to less than 15% in the project producers. The primary objective of this study is to develop a robust history-matched reservoir simulation model capable of predicting future polymer flood performance. In this work, the reservoir simulation model has been developed based on the geological model and available reservoir and fluid data. In particular, four high transmissibility strips were introduced to connect the injector-producer well pairs, simulating short-circuiting flow behavior that can be explained by viscous fingering and reproducing the water cut history. The strip transmissibilities were manually tuned to improve the history matching results during the waterflooding and polymer flooding periods, respectively. It has been found that higher strip transmissibilities match the sharp water cut increase very well in the waterflooding period. Then the strip transmissibilities need to be reduced with time to match the significant water cut reduction. The viscous fingering effect in the reservoir during waterflooding and the restoration of injection conformance during polymer flooding have been effectively represented. Based on the validated simulation model, numerical simulation tests have been conducted to investigate the oil recovery performance under different development strategies, with consideration for sensitivity to polymer parameter uncertainties. The oil recovery factor with polymer flooding can reach about 39% in 30 years, twice as much as forecasted with continued waterflooding. Besides, the updated reservoir model has been successfully employed to forecast polymer utilization, a valuable parameter to evaluate the pilot test’s economic efficiency. All the investigated development strategies indicate polymer utilization lower than 3.5 lbs/bbl in 30 years, which is economically attractive.

Wang, Xindan↗
DOE OSTI2017

Complementary Semiconducting Polymer Blends: Influence of Side Chains of Matrix Polymers

The concept of complementary semiconducting polymer blends (c-SPBs) has been recently proposed to achieve enhanced solution processability and/or melt-processing capability for organic electronics. In the previous study, we demonstrated the impact of conjugation-break spacers of matrix polymers. In the current work, we explore the influence of the side chains of the matrix polymer on the physical properties of the pure polymers and their corresponding c-SPBs, including electrical properties and phase transition behaviors. Specifically, six diketopyrrolopyrrole (DPP)-based polymers with pentamethylene conjugation-break spacers (CBSs) and various side chains, including branched-alkyl, triethylene glycol (TEG), and siloxaneterminated side chains, were synthesized and characterized. The UV–vis spectra show that the side chains have a noticeable impact on the intermolecular interactions in the solid states. In addition, side chains also have a significant influence on the thermal behaviors of the polymers. Polymers with asymmetric side chains attached to the same DPP unit exhibit lower melting points compared to the congeners with symmetric side chains. The polymer with both branched-alkyl and TEG side chain exhibits the lowest melting point of 104 °C. As for charge transport properties, polymers with branched-alkyl and/or siloxaneterminated side chains give hole mobilities on the same order of magnitude, whereas the polymers with TEG side chains exhibits much lower mobilities. When c-SPBs with a fully conjugated polymer with branched-alkyl side chains are concerned, the c-SPBs of all polymers, except for the polymer with only TEG side chains (TEG-DPP-C5), show hole mobilities 2 orders of magnitude higher than the corresponding pure matrix polymers. In contrast, TEG-DPP-C5 merely presents an improvement of 20 times, which resulted from the incompatibility of TEG side chains from the matrix polymer and the alkyl side chains from the tie chain polymer. These results provide new insights into structural design for semiconducting materials with both high performance and better processability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Atomic Origins of the Self-Healing Function in Cement–Polymer Composites

Motivated by recent advances in self-healing cement and epoxy polymer composites, we present a combined ab initio molecular dynamics and sum frequency generation (SFG) spectroscopy study of a calcium-silicate-hydrate/polymer interface. On stable, low-defect surfaces, the polymer only weakly adheres through coordination and hydrogen bonding interactions and can be easily mobilized towards defected surfaces. Conversely, on fractured surfaces, the polymer strongly anchors through ionic Ca-O bonds resulting from the deprotonation of polymer hydroxyl groups. In addition, polymer S-S groups are turned away from the cement/polymer interface, allowing for the self-healing function within the polymer. The overall elasticity and healing properties of these composites stem from a flexible hydrogen bonding network that can readily adapt to surface morphology. The theoretical vibrational signals associated with the proposed cement-polymer interfacial chemistry were confirmed experimentally by SFG spectroscopy.

ab initio molecular 8 dynamics↗
DOE OSTI2019

First Ever Polymer Flood Field Pilot to Enhance the Recovery of Heavy Oils on Alaska’s North Slope – Polymer Injection Performance

Alaska North Slope (ANS) holds an estimated 20-30+ billion barrel heavy oil resources, yet the development pace has been very slow due to high development costs and low oil recovery using conventional waterflood and EOR methods. The objective of this pilot is to perform a field experiment to validate the use of an advanced polymer flooding technology to unlock the vast heavy oil resources on ANS. The advanced polymer flooding technology combines polymer flooding, low salinity water flooding, horizontal wells, and if necessary, injection conformance control treatments into one integrated process to significantly improve oil recovery from heavy oil reservoirs. Two pairs of horizontal injection and production wells have been deployed in an isolated fault block of the Schrader Bluff heavy oil reservoir at the Milne Point Field to conduct a polymer flood pilot. The pilot will acquire scientific knowledge and field performance data to optimize polymer flood design in the Schrader Bluff heavy oil reservoirs on ANS. Polymer injection started on August 28, 2018 using a custom made polymer blending and pumping unit. This paper focuses on the facility setup and polymer injection performance into the horizontal injectors drilled and completed in the Schrader Bluff heavy oil reservoir. Partially hydrolyzed polyacrylamide (HPAM) polymer was selected and the initial target viscosity was set at 45 centipoise. Polymer injection rate was set at 2200 bbl/day for one injector (J-23A) and 1200 bbl/day for the other (J-24A) based on production voidage. Injection pressure was controlled at below fracture pressure to prevent fracturing the reservoir and causing fast breakthroughs. Step rate and pressure falloff tests indicate that short term polymer injectivity is similar to water injectivity, which means that injectivity is mostly controlled by fluid mobility deep in the reservoir rather than that in the vicinity of the injection wellbore. Long term injection data indicate that polymer injectivity has been decreasing in both injectors as the reservoir is filled by polymer. No polymer has been observed in the production stream 7 months after the start of polymer injection compared with a 3-month breakthrough time with waterflood. This indicates that polymer significantly delays breakthrough time which will lead to increased sweep efficiency.

Ning, Samson↗
DOE OSTI2019

Insights into the physical and chemical properties of a cement-polymer composite developed for geothermal wellbore applications

To isolate injection and production zones from overlying formations and aquifers during geothermal operations, cement is placed in the annulus between well casing and formations. Wellbore cement can fracture due to chemical and physical stress. A polymer-cement (composite) with self-healing properties, stable at high temperatures, was recently developed by our group. Here we present data on the elemental distribution, mineral composition, internal microstructure, and tensile elasticity of this composite and how it compares to cement without polymer (control cement). Entrapped air porosity was similar between control cement (0.44% by volume) and composite (0.22% by volume). Total voids increased with polymer content in the cement (10% and 25% composite), and polymer was found to fill most of these voids. Polymer appears to act as a (cement hydration) retarder increasing the amount of unhydrated silicate minerals in the matrix. Tensile elasticity was improved for composites as compared to control cement, suggesting that the composite materials perform better under mechanical stress. Density-functional calculations reproduce the drop in Young’s modulus by about 60% observed experimentally when polymer is added to the cement. In addition, calculations indicate that the bonding interactions between the cement and polymer remain stable over the range of strain studied.

Rod, Kenton A. (ORCID:0000000318189094)↗
DOE OSTI2021

Effect of surface properties and polymer chain length on polymer adsorption in solution

In polymer nanoparticle composites (PNCs) with attractive interactions between nanoparticles (NPs) and polymers, a bound layer of the polymer forms on the NP surface, with significant effects on the macroscopic properties of the PNCs. The adsorption and wetting behaviors of polymer solutions in the presence of a solid surface are critical to the fabrication process of PNCs. In this study, we use both classical density functional theory (cDFT) and molecular dynamics (MD) simulations to study dilute and semi-dilute solutions of short polymer chains near a solid surface. Using cDFT, we calculate the equilibrium properties of polymer solutions near a flat surface while varying the solvent quality, surface–fluid interactions, and the polymer chain lengths to investigate their effects on the polymer adsorption and wetting transitions. Using MD simulations, we simulate polymer solutions near solid surfaces with three different curvatures (a flat surface and NPs with two radii) to study the static conformation of the polymer bound layer near the surface and the dynamic chain adsorption process. Additionally, we find that the bulk polymer concentration at which the wetting transition in the poor solvent system occurs is not affected by the difference in surface–fluid interactions; however, a threshold value of surface–fluid interaction is needed to observe the wetting transition. We also find that with good solvent, increasing the chain length or the difference in the surface–polymer interaction relative to the surface–solvent interaction increases the surface coverage of polymer segments and independent chains for all surface curvatures. Finally, we demonstrate that the polymer segmental adsorption times are heavily influenced only by the surface–fluid interactions, although polymers desorb more quickly from highly curved surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Analysis of the transport properties of thermally rearranged (TR) polymers and polymers of intrinsic microporosity (PIM) relative to upper bound performance

A critical analysis comparing the diffusion selectivity, solubility selectivity, diffusivity, and solubility coefficients of thermally rearranged (TR) polymers and polymers of intrinsic microporosity (PIM), two types of polymers which consistently perform at or beyond the polymer upper bound for certain gas pairs (O 2 /N 2 and CO 2 /CH 4 ), is reported in this paper. Although most polymers in these two classes exhibit transport properties in the range of typical glassy polymers, several variants offer exceptional performance. The diffusivity selectivity for O 2 /N 2 and CO 2 /CH 4 for TR polymers and PIM lies outside the range of the glassy polymer database. The solubility coefficients for O 2 are at the upper end of the range of both TR and PIM polymers, as is also the case for CO 2 solubility coefficients for PIM polymers. The O 2 /N 2 and CO 2 /CH 4 solubility selectivities for both PIM and TR polymers are in the range of typical glassy polymers. Thus, unique separation values for these polymers are a manifestation of maximizing diffusivity selectivity combined with very high gas solubility. Additionally, the previously determined diffusion gas kinetic diameters, d g , were found to correlate best with diffusion coefficients of PIM and TR polymers and serve to better analyze transport properties of upper bound materials.

36 MATERIALS SCIENCE↗
DOE OSTI2019

All-Polymer Solar Cells: Recent Progress, Challenges, and Prospects

For over two decades bulk-heterojunction polymer solar cell (BHJ-PSC) research was dominated by donor:acceptor BHJ blends based on polymer donors and fullerene molecular acceptors. This situation has changed recently, with non-fullerene PSCs developing very rapidly. The power conversion efficiencies of non-fullerene PSCs have now reached over 15 %, which is far above the most efficient fullerene-based PSCs. Among the various non-fullerene PSCs, all-polymer solar cells (APSCs) based on polymer donor-polymer acceptor BHJs have attracted growing attention, due to the following attractions: 1) large and tunable light absorption of the polymer donor/polymer acceptor pair; 2) robustness of the BHJ film morphology; 3) compatibility with large scale/large area manufacturing; 4) long-term stability of the cell to external environmental and mechanical stresses. This Minireview highlights the opportunities offered by APSCs, selected polymer families suitable for these devices with optimization to enhance the performance further, and discusses the challenges facing APSC development for commercial applications.

bio-inspired↗
DOE OSTI2022

“Tailing” Phenomenon During Polymer Propagation at The Milne Point Polymer Flood

Chemical flooding simulators traditionally assume that polymer retention follows the Langmuir isotherm, while fractional-flow calculations assume concentration-independent retention. Both models predict a delay in propagation of the polymer front (in proportion to the retention value), followed by a rapid rise in produced polymer concentration to the injected level. In contrast, laboratory retention studies for the Milne Point polymer flood (North Slope of Alaska) consistently show virtually no delay in polymer propagation, a rapid rise in produced polymer to 70-90% of the injected concentration, followed by produced concentration gradually approaching the injected value over many pore volumes. From a practical viewpoint, this behavior means that retention causes no significant delay in propagation of the polymer bank (and therefore the oil bank), but the effective viscosity and displacement efficiency are less than originally planned. This paper explores why this polymer “tailing” phenomenon occurs. During core floods, effluent was analyzed for brine-tracer concentration, viscosity, total organic carbon, and total nitrogen. The latter three items allowed three independent measures of polymer concentration and polymer retention. Experiments were performed with Milne Point core material, oil, brine, and conditions. Mechanistic experiments were also performed with packs of glass beads with controlled levels of various minerals. In Milne Point cores, the presence of the tailing phenomenon was not sensitive to flow rate, polymer concentration, core heterogeneity, or whether the core was preserved, cleaned of oil, or cleaned and resaturated with oil, or cleaned, re-saturated and aged with oil. The three independent measures of polymer concentration confirmed that the tailing phenomenon was not an artifact associated with polymer degradation or detection interferences. Tailing was also observed during mechanistic floods using glassbead packs when sufficient levels of illite or kaolinite were present. This observation was consistent with high levels of illite noted in Milne Point cores. The tailing was not noted during mechanistic floods that contained beads with montmorillonite, chlorite, calcium carbonate, dolomite, siderite, pyrite, or calcium sulfate. A model is proposed to account for the tailing phenomenon. This work suggests that mineralogy analysis (especially for illite and kaolinite) may reveal whether tailing should be accounted for during simulations of polymer propagation/retention in a given field application.

Seright, Randy↗
DOE OSTI2019

Polymer concentration detection method based on fluorescent polymer to evaluate its retention and percolation

ABSTRACT A new fluorescent polymer was prepared by copolymerization of acrylamide and a modified rhodamine B (RhB). Fourier transformation infrared spectrometer and nuclear magnetic resonance confirmed the successful modification of RhB and the synthesis of fluorescent polymer. The rheological and fluorescence properties were studied by fluorospectrophotometer and rotational rheometer. The adsorption retention and percolation properties were evaluated by sand pack displacement experiments. The results indicated that fluorescence intensity revealed a distinct linear relationship with polymer concentration within a certain concentration range. High temperature and strong acidic conditions could diminish fluorescence intensity whereas formation water ions exerted inconsiderable influence on it. Rheological results manifested that fluorescent polymer can be used as polymer flooding agent. The sand pack displacement results proved the feasibility of using fluorescent polymer to detect polymer concentration. By this means, polymer breakthrough time and concentration variations could be confirmed. Based on the curves of injection pressure and polymer concentration, the percolation state and retention of polymer were able to be analyzed. Significantly, this work can provide support and guidance for the practical applications of fluorescent polymer. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136 , 47468.

Kang, Wanli↗
DOE OSTI2022

Towards directed energy deposition of metals using polymer-based supports: porosity of 316L stainless steel deposited on carbon-fiber-reinforced ABS

Directed energy deposition (DED) is increasingly valuable to many industries because of its high deposition rates relative to other metal additive manufacturing processes, but the design space of DED is limited. For instance, steep overhangs are difficult or impossible to manufacture. Polymer-based support structures could help address this challenge. The viability of DED on polymer composite substrates has begun to be explored, specifically with 316L stainless steel on carbon-fiber-reinforced ABS substrates. Monolithic metal components can be deposited on the polymer, but it was found that gas release during polymer degradation causes porosity due to gas entrapment in the metal. An interlayer cooling time was introduced to reduce polymer degradation and decrease the porosity due to gas entrapment, but this led to porosity from lack of fusion. The results of this work provide insight into process parameter selection and scan strategy development to enable the use of polymer support structures in blown-powder DED.

Kurfess, Rebecca↗
DOE OSTI2020

Influence of Polymer Type and Carbon Nanotube Properties on Carbon Nanotube/Polymer Nanocomposite Biodegradation

The interaction of anaerobic microorganisms with carbon nanotube/polymer nanocomposites (CNT/PNC) will play a major role in determining their persistence and environmental fate at the end of consumer use when these nano-enabled materials enter landfills and encounter wastewater. Motivated by the need to understand how different parameters (i.e., polymer type, microbial phenotype, CNT characteristics) influence CNT/PNC biodegradation rates, we have used volumetric biogas measurements and kinetic modeling to study biodegradation as a function of polymer type and CNT properties. In one set of experiments, oxidized multiwall carbon nanotubes (O-MWCNTs) with a range of CNT loadings 0 – 5% w/w were incorporated into poly-e-caprolactone (PCL) and polyhydroxyalkanoates (PHA) matrices and subjected to biodegradation by an anaerobic microbial community. For each CNT/PNC, complete polymer biodegradation was ultimately observed, although the rate of biodegradation was inhibited above certain critical CNT loadings dependent upon the polymer type. Higher loadings of pristine MWCNTs were needed to decrease the rate of polymer biodegradation compared to O-MWCNTs, an effect ascribed principally to differences in CNT dispersion within the polymer matrices. Above ertain CNT loadings, a CNT mat of similar shape to the initial PNC was formed after polymer biodegradation, while below this threshold, CNT aggregates fragmented in the media. In situations where biodegradation was rapid, methanogen growth was disproportionately inhibited compared to the overall microbial community. Analysis of the results obtained from this study indicates that the inhibitory effect of CNTs on polymer biodegradation rate is greatest under conditions (i.e., polymer type, microbial phenotype, CNT dispersion) where biodegradation of the neat polymer is slowest. This new insight provides a means to predict the environmental fate, persistence and transformations of CNT-enabled polymer materials.

Frank, Benjamin↗
NASA NTRS1996

Polymer-Induced Depletion Interaction and Its Effect on Colloidal Sedimentation in Colloid-Polymer Mixtures

In this paper we focus on the polymer-induced depletion attraction and its effect on colloidal sedimentation in colloid-polymer mixtures. We first report a small angle neutron scattering (SANS) study of the depletion effect in a mixture of hard-sphere-like colloid and non-adsorbing polymer. Then we present results of our recent sedimentation measurements in the same colloid-polymer mixture. A key parameter in controlling the sedimentation of heavy colloidal particles is the interparticle potential U(tau), which is the work required to bring two colloidal particles from infinity to a distance tau under a give solvent condition. This potential is known to affect the average settling velocity of the particles and experimentally one needs to have a way to continuously vary U(tau) in order to test the theory. The interaction potential U(tau) can be altered by adding polymer molecules into the colloidal suspension. In a mixture of colloid and non-adsorbing polymer, the potential U(tau) can develop an attractive well because of the depletion effect, in that the polymer chains are expelled from the region between two colloidal particles when their surface separation becomes smaller than the size of the polymer chains. The exclusion of polymer molecules from the space between the colloidal particles leads to an unbalanced osmotic pressure difference pushing the colloidal particles together, which results in an effective attraction between the two colloidal particles. The polymer-induced depletion attraction controls the phase stability of many colloid-polymer mixtures, which are directly of interest to industry.

Tong, Penger↗
DOE OSTI2022

Cost-Efficiency balanced polymer acceptors based on lowly fused Dithienopyrrolo[3, 2b]benzothiadiazole for 16.04% efficiency All-Polymer solar cells

All-polymer solar cells (All-PSCs) attracted increasing attention due to the outstanding thermal stability and mechanical properties. The current prevailing polymer acceptors for most efficient All-PSCs are polymerized high-performance small molecule acceptor of Y6, i.e. the dithienothiopheno[3,2-b]-pyrrolobenzothiadiazole (BTTP) based polymers. However, the BTTP-based polymers often show relatively shallow highest occupied molecular orbital (HOMO) energy level and high figure of merit (FOM), which limit the rational selection of paring donor polymers. Herein, we presented two low-cost polymer acceptors, namely as BTP-T2F and BTP-2T2F, based on lowly fused dithienopyrrolo[3,2b]benzothiadiazole (BTP, removing two thiophene cycles from BTTP). Here the BTP-based polymers exhibited deeper HOMO levels around –5.90 eV, which could match variable donor polymers with low-lying HOMO levels, such as low-cost PTQ10. Additionally, the synthesis was significantly simplified compared to BTTP-based polymers. A power conversion efficiency (PCE) of 14.32% was achieved in binary blend device containing PTQ10:BTP-2T2F. By adding a miscibility-enhancing PBDTCl-TPD as a third component, the top PCE of 16.04% was obtained in ternary blend All-PSCs. Combining the high device performance and low estimated cost, extraordinary cost-efficiency balance was realized within these BTP-based polymer acceptors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Heterogeneity and Hysteresis in the Polymer Collapse of Single Core–Shell Stimuli-Responsive Plasmonic Nanohybrids

Broad application of polymeric stimuli-responsive smart nanohybrids requires understanding the mechanisms governing active control. Ensemble techniques have identified inhomogeneous polymer collapse in microgels that potentially arise from heterogeneous interchain interactions and differences in core size. A single-particle examination would establish the influence of core size and internal polymer network heterogeneity on local interactions that contribute to the observed inhomogeneous polymer collapse dynamics of nanohybrids. Using single-particle dark-field spectroscopy, we investigated the complex polymer collapse profiles of core–shell plasmonic nanohybrids comprising thermoresponsive poly(N-isopropylacrylamide) (pNIPAM)-encapsulated gold nanorods (AuNRs). We report that the polymer collapse behavior was independent of the core size. For thinner polymer shells, we observed hysteresis in the collapse of AuNR@pNIPAMs, likely related to local pNIPAM aggregation due to interchain hydrogen bonding. For thicker polymer shells, we observed a broad polymer collapse distribution that we attributed to a two-step phase transition that arises from a polymer network density gradient. Furthermore, our single-particle approach relates the internal heterogeneity of the polymer network of nanohybrids to the mechanisms underlying heterogeneous phase transitions that traditional, ensemble-averaged approaches are unable to discern.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Cavitation and radicals drive the sonochemical synthesis of functional polymer spheres

Sonochemical synthesis can lead to a dramatic increase in the kinetics of formation of polymer spheres (templates for carbon spheres) compared to the modified Stöber silica method applied to produce analogous polymer spheres. Reactive molecular dynamics simulations of the sonochemical process indicate a significantly enhanced rate of polymer sphere formation starting from resorcinol and formaldehyde precursors. The associated chemical reaction kinetics enhancement due to sonication is postulated to arise from the localized lowering of atomic densities, localized heating, and generation of radicals due to cavitation collapse in aqueous systems. This dramatic increase in reaction rates translates into enhanced nucleation and growth of the polymer spheres. The results are of broad significance to understanding mechanisms of sonication induced synthesis as well as technologies utilizing polymers spheres.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Alkyl Chain Length Effects of Polymer Donors on the Morphology and Device Performance of Polymer Solar Cells with Different Acceptors

Abstract The development of nonfullerene acceptors has brought polymer solar cells into a new era. Maximizing the performance of nonfullerene solar cells needs appropriate polymer donors that match with the acceptors in both electrical and morphological properties. So far, the design rationales for polymer donors are mainly borrowed from fullerene‐based solar cells, which are not necessarily applicable to nonfullerene solar cells. In this work, the influence of side chain length of polymer donors based on a set of random terpolymers PTAZ‐TPD10‐C n on the device performance of polymer solar cells is investigated with three different acceptor materials, i.e., a fullerene acceptor [70]PCBM, a polymer acceptor N2200, and a fused‐ring molecular acceptor ITIC. Shortening the side chains of polymer donors improves the device performance of [70]PCBM‐based devices, but deteriorates the N2200‐ and ITIC‐based devices. Morphology studies unveil that the miscibility between donor and acceptor in blend films depends on the side chain length of polymer donors. Upon shortening the side chains of the polymer donors, the miscibility between the donor and acceptor increases for the [70]PCBM‐based blends, but decreases for the N2200‐ and ITIC‐based blends. These findings provide new guidelines for the development of polymer donors to match with emerging nonfullerene acceptors.

Pang, Shuting↗
DOE OSTI2019

Soft Interactions Modify the Diffusive Dynamics of Polymer-Grafted Nanoparticles in Solutions of Free Polymer

We examine the dynamics of silica particles grafted with high molecular weight polystyrene suspended in semidilute solutions of chemically similar linear polymer using X-ray photon correlation spectroscopy. The particle dynamics decouple from the bulk viscosity despite their large hydrodynamic size and instead experience an effective viscosity that depends on the molecular weight of the free polymer chains. Unlike for hard-sphere nanoparticles in semidilute polymer solutions, the diffusivities of the polymer-grafted nanoparticles do not collapse onto a master curve solely as a function of normalized length scales. Instead, the diffusivities can be collapsed across two orders of magnitude in free polymer molecular weight and concentration and one order of magnitude in grafted molecular weight by incorporating the ratio of free to grafted polymer molecular weights. These results suggest that the soft interaction potential between polymer-grafted nanoparticles and free polymer allows polymer-grafted nanoparticles to diffuse faster than predicted based on bulk rheology and modifies the coupling between grafted particle dynamics and the relaxations of the surrounding free polymer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗