SEARCH · Engineering Papers

Results for “Point containment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1983

The control networks of Mimas and Enceladus

A bundle-type analytical triangulation program is employed to compute control networks for Mimas, whose network encircles the satellite with 110 points measured on 32 Voyager 1 pictures, and Enceladus, whose network does not completely encircle the satellite and contains 71 points measured on 22 Voyager 2 pictures. Many of the control points are identified on illustrations and by name, and their coordinates are presented in tabular form. The analytical triangulation program was used to solve for the mean radii and three principal axes of best-fit ellipsoids. The mean radius of Mimas is 197 + or - 3 km, while that of Enceladus is 251 + or - 5 km.

Davies, M. E.↗

NASA NTRS1999

Large-Scale Parallel Viscous Flow Computations using an Unstructured Multigrid Algorithm

The development and testing of a parallel unstructured agglomeration multigrid algorithm for steady-state aerodynamic flows is discussed. The agglomeration multigrid strategy uses a graph algorithm to construct the coarse multigrid levels from the given fine grid, similar to an algebraic multigrid approach, but operates directly on the non-linear system using the FAS (Full Approximation Scheme) approach. The scalability and convergence rate of the multigrid algorithm are examined on the SGI Origin 2000 and the Cray T3E. An argument is given which indicates that the asymptotic scalability of the multigrid algorithm should be similar to that of its underlying single grid smoothing scheme. For medium size problems involving several million grid points, near perfect scalability is obtained for the single grid algorithm, while only a slight drop-off in parallel efficiency is observed for the multigrid V- and W-cycles, using up to 128 processors on the SGI Origin 2000, and up to 512 processors on the Cray T3E. For a large problem using 25 million grid points, good scalability is observed for the multigrid algorithm using up to 1450 processors on a Cray T3E, even when the coarsest grid level contains fewer points than the total number of processors.

Mavriplis, Dimitri J.↗

NASA NTRS1973

A restricted proof that the weak equivalence principle implies the Einstein equivalence principle

Schiff has conjectured that the weak equivalence principle (WEP) implies the Einstein equivalence principle (EEP). A proof is presented of Schiff's conjecture, restricted to: (1) test bodies made of electromagnetically interacting point particles, that fall from rest in a static, spherically symmetric gravitational field; (2) theories of gravity within a certain broad class - a class that includes almost all complete relativistic theories that have been found in the literature, but with each theory truncated to contain only point particles plus electromagnetic and gravitational fields. The proof shows that every nonmentric theory in the class (every theory that violates EEP) must violate WEP. A formula is derived for the magnitude of the violation. It is shown that WEP is a powerful theoretical and experimental tool for constraining the manner in which gravity couples to electromagnetism in gravitation theories.

Lightman, A. P.↗

NASA NTRS1979

Lunar laser ranging data deposited in the National Space Science Data Center normal points, filtered observations, and unfiltered photon detections

The lunar laser ranging project at McDonald Observatory provides the unique opportunity to acquire successfully precise range data for the earth-moon system. From the experiment's inception, the obligation was recognized to make these data available to the general scientific community in a reasonably useable form and in a realistic time frame. The documentation to be used in conjunction with the 1979 April deposit into the National Space Science Data Center which contains normal points, filtered observations and unfiltered photon stops for the months July through December, 1978 are reported.

Shelus, P. J.↗

NASA NTRS1999

Microgravity Effecs During Fertilization, Cell Division, Development, and Calcium Metabolism in Sea Urchins

Calcium loss and muscle atrophy are two of the main metabolic changes experienced by astronauts and crew members during exposure to microgravity in space. For long-term exposure to space it is crucial to understand the underlying mechanisms for altered physiological functions. Fundamental occurrences in cell biology which are likely to depend on gravity include cytoskeletal dynamics, chromatin and centrosome cycling, and ion immobilization. These events can be studied during fertilization and embryogenesis within invertebrate systems. We have chosen the sea urchin system to study the effects of microgravity on cytoskeletal processes and calcium metabolism during fertilization, cell division, development, and embryogenesis. Experiments during an aircraft parabolic flight (KC-135) demonstrated: (1) the viability of sea urchin eggs prior to fertilization, (2) the suitability of our specimen containment system, (3) the feasibility of fertilization in a reduced gravity environment (which was achieved during 25 seconds of reduced gravity under parabolic flight conditions). Two newly developed pieces of spaceflight hardware made further investigations possible on a spaceflight (STS-77); (1) the Aquatic Research Facility (ARF), and (2) the Fertilization Syringe Unit (FSU). The Canadian Space Agency developed ARF to conduct aquatic spaceflight experiments requiring controlled conditions of temperature, humidity, illumination, and fixation at predetermined time points. It contained a control centrifuge which simulated the 1 g environment of earth during spaceflight. The FSU was developed at the Kennedy Space Center (KSC) by the Bionetics Corporation specifically to enable the crew to perform sea urchin fertilization operations in space.

Schatten, Heide↗

NASA NTRS1973

Cluster Seeking Techniques in Pattern Recognition

A cluster seeking technique is defined as a method of dividing data into subsets, called clusters. These clusters contain data points that are similar to each other and different from the elements of other clusters. Various cluster seeking techniques were broken down into seven categories: (1) probabilistic, (2) signal detection, (3) clustering, (4) clumping, (5) eigenvalue, (6) minimal mode seeking, and (7) miscellaneous. Each category is described and one or more algorithms of that type are presented.

Barr, B. J.↗

NASA NTRS1973

Determination of normal points for the relativity test of the celestial mechanics experiment

The relativity test is based on Mariner 9 tracking data acquired by the Deep Space Network. These data consist of two types of measurements: (1) two-way frequency difference (Doppler) measurements that are proportional to the tracking station-spacecraft range rate, and (2) signal round trip time-delay measurements that are proportional to the station-spacecraft range. A data compression scheme has been employed to alleviate accuracy and cost difficulties by (1) using the Doppler data to solve for the spacecraft orbit and to relate spacecraft position to the center of mass of Mars; and (2) combining this result with the station-spacecraft range measurements to obtain measurements of the Earth-Mars distance, called normal points, that contain all of the information pertinent to a detailed knowledge of the Earth-Mars motion.

Jordan, J. F.↗

NASA NTRS1974

Synthesis and evaluation of C-ether formulations for use as high temperature lubricants and hydraulic fluids

The formulation and evaluation of C-ether fluids for use in the hydraulic and lubrication systems of the space shuttle and advanced air breathing engines were studied to lower the pour point of a reference C-ether from -29 C to -40 C without changing its evaporation loss. Use of disiloxanes mixed with C-ethers gave a -40 C pour point fluid with little change in the desired evaporation loss or in oxidative stability. A second -40 C pour point fluid containing only C-ethers was also developed. A screening program tested lubrication additives for C-ethers and the new fluids. Six additive packages were chosen for evaluation in 316 C bearing tests, two for evaluation in 260 C pump tests. The goal of the bearing test was a 100 hour run. The rig was a specially designed 80-mm axially loaded ball bearing. The C-ether base fluid ran only one hour at 316 C before cage wear failure occurred. The best additive blends ran 47, 94 and 100 hours. The 96 hour test gave excessive deposits. The 100 hour test had no wear failures; an unexplained loss of cage silver occurred from areas of direct fluid impingement on the cage.

Clark, F. S.↗

NASA NTRS1974

Study of monopropellants for electrothermal thrusters

A 333 mN electrothermal thruster designed to use MIL-grade hydrazine was demonstrated to be suitable for operation with low freezing point monopropellants containing hydrazine azide, monomethylhydrazine, unsymmetrical-dimethylhydrazine and ammonia. The steady-state specific impulse was greater than 200 sec for all propellants. The pulsed-mode specific impulse for an azide blend exceeded 175 sec for pulse widths greater than 50 msec; propellants containing carbonaceous species delivered 175 sec pulsed-mode specific impulses for pulse widths greater than 100 msec. Longer thrust chamber residence times were required for the carbonaceous propellants; the original thruster design was modified by increasing the characteristic chamber length and screen packing density. Specific recommendations were made for the work required to design and develop flight worthy thrusters, including methods to increase propellant dispersal at injection, thruster geometry changes to reduce holding power levels and methods to initiate the rapid decomposition of the carbonaceous propellants.

Kuenzly, J. D.↗

NASA NTRS1975

Mixed boundary value problems in mechanics

Certain boundary value problems were studied over a domain D which may contain the point at infinity and may be multiply connected. Contours forming the boundary are assumed to consist of piecewise smooth arcs. Mixed boundary value problems are those with points of flux singularity on the boundary; these are points on the surface, either side of which at least one of the differential operator has different behavior. The physical system was considered to be described by two quantities, the potential and the flux type quantities. Some of the examples that were illustrated included problems in potential theory and elasticity.

Erdogan, F.↗

NASA NTRS1976

Optimal command generation for tracking a class of discontinuous trajectories

Commands are found to drive a linear system to optimally track a class of prescribed trajectories, each of which contains a point of discontinuity. The paper focuses on the guidance problem of command generation, to be implemented in a feedforward fashion; the necessary additional control or feedback regulation structure is not studied in detail, but assumed to be provided in applications as a conventional error-feedback regulator. Solutions are found for the infinite-time problem which are optimal with respect to a quadratic performance criterion; suboptimal controls which satisfy a continuity condition are also found. The controls have applications to certain problems in aircraft guidance where command trajectories are piecewise continuous. Several examples are worked out in detail, with comparisons with conventional, nonfeedforward solutions to the problem, and a brief discussion of a simpler, suboptimal solution.

Weissenberger, S.↗

NASA NTRS1978

Landsat spectral signatures - Studies with soil associations and vegetation

The effect of soils and vegetation upon Landsat spectral properties was investigated for a 12,950 hectare area. Six soil associations used for corn, small grains, and grass were analyzed for two dates during the 1974 growing season. Landsat scenes for April 19 and June 30 were studied to separate categories of agricultural land use and to assess the influence of soil association on the spectral signatures of vegetation and bare ground. The April 19 data were useful to separate cropland from grassland and to locate areas of open water. The June 30 data showed that soil associations could not consistently be separated within the data of a single vegetative type; however, the results showed that soils did influence all vegetative spectral reflectances to some degree. Because soils did influence vegetative spectral reflectance, a generalized training set containing data points from each of the six soil associations was used to separate four categories of agricultural land use in the 12,950 hectare test area. An accuracy of about 94% was obtained.

Westin, F. C.↗

NASA NTRS1978

Implications of abundant hygroscopic minerals in the Martian regolith

Converging lines of evidence suggest that a significant portion of the Martian surface fines may consist of salts and smectite clays. Salts can form stoichiometric hydrates as well as eutectic solutions with depressed freezing points; clays contain bound water of constitution and adsorb significant quantities of water from the vapor phase. The formation of ice may be suppressed by these minerals in some regions on Mars, and their presence in abundance would imply important consequences for atmospheric and geologic processes and the prospects for exobiology.

Clark, B. C.↗

NASA NTRS1979

A search for X-ray pulsations from the Galactic Centre

A search has been conducted for periodic X-ray behavior in the Galactic Center, a region known to contain several point sources. No pulsations are detected in the range from about 2 sec to 2000 sec. The assumption that part of the steady flux from the Galactic Center is due to the steady contribution of bursters is discussed. It is also noted that the absence of pulsations does not necessarily undermine the proposed binary-neutron star models for the burst sources.

Cordova, F. A.↗

NASA NTRS1982

Tool Blunts Cotter Pin Legs for Safety

Jaws on new insertion tool contain upset point and anvil. Point forces cotter-pin legs into loop as it engages anvil. Cotter pin before insertion consists of loop and straight shaft composed of two legs welded together as tips. After insertion, welded legs have been shaped into loop. Tool used to prevent bent loose ends of cotter pins from scratching workers' fingers or cutting and entangling wires.

Stein, J. A.↗

NASA NTRS1988

Numerical investigations in three-dimensional internal flows

An investigation into the use of computational fluid dynamics (CFD) was performed to examine the expected heat transfer rates that will occur within the NASA-Ames 100 megawatt arc heater nozzle. This nozzle was tentatively designed and identified to provide research for a directly connected combustion experiment specifically related to the National Aerospace Plane Program (NASP) aircraft, and is expected to simulate the flow field entering the combustor section. It was found that extremely fine grids, that is very small mesh spacing near the wall, are required to accurately model the heat transfer process and, in fact, must contain a point within the laminar sublayer if results are to be taken directly from a numerical simulation code. In the present study, an alternative to this very fine mesh and its attendant increase in computational time was invoked and is based on a wall-function method. It was shown that solutions could be obtained that give accurate indications of surface heat transfer rate throughout the nozzle in approximately 1/100 of the computer time required to do the simulation directly without the use of the wall-function implementation. Finally, a maximum heating value in the throat region of the proposed slit nozzle for the 100 megawatt arc heater was shown to be approximately 6 MW per square meter.

Rose, William C.↗

NASA NTRS1990

Qualification of the RSRM field joint CF case-to-insulation bondline inspection using the Thiokol Corporation ultrasonic RSRM bondline inspection system

Qualification testing of Combustion Engineering's AMDATA Intraspect/98 Data Acquisition and Imaging System that applies to the redesigned solid rocket motor field joint capture feature case-to-insulation bondline inspection was performed. Testing was performed at M-111, the Thiokol Corp. Inert Parts Preparation Building. The purpose of the inspection was to verify the integrity of the capture feature area case-to-insulation bondline. The capture feature scanner was calibrated over an intentional 1.0 to 1.0 in. case-to-insulation unbond. The capture feature scanner was then used to scan 60 deg of a capture feature field joint. Calibration of the capture feature scanner was then rechecked over the intentional unbond to ensure that the calibration settings did not change during the case scan. This procedure was successfully performed five times to qualify the unbond detection capability of the capture feature scanner. The capture feature scanner qualified in this test contains many points of mechanical instability that can affect the overall ultrasonic signal response. A new generation scanner, designated the sigma scanner, should be implemented to replace the current configuration scanner. The sigma scanner eliminates the unstable connection points of the current scanner and has additional inspection capabilities.

Cook, M.↗

NASA NTRS1989

Chebyshev polynomials are not always optimal

The problem is that of finding among all polynomials of degree at most n and normalized to be 1 at c the one with minimal uniform norm on Epsilon. Here, Epsilon is a given ellipse with both foci on the real axis and c is a given real point not contained in Epsilon. Problems of this type arise in certain iterative matrix computations and, in this context, it is generally believed and widely referenced that suitably normalized Chebyshev polynomials are optimal for such constrained approximation problems. It is shown that this is not true in general. Moreover, sufficient conditions are derived which guarantee that Chebyshev polynomials are optimal. Some numerical examples are also presented.

Fischer, Bernd↗