Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

A Side by Side Comparison of Filter-Based PM(sub 2.5) Measurements at a Suburban Site: A Closure Study

Reliable determination of the effects of air quality on public health and the environment requires accurate measurement of PM(sub 2.5) mass and the individual chemical components of fine aerosols. This study seeks to evaluate PM(sub 2.5) measurements that are part of a newly established national network by comparing them with a more conventional sampling system. Experiments were carried out during 2002 at a suburban site in Maryland, United States, where two samplers from the U.S. Environmental Protection Agency (USEPA) Speciation Trends Network: Met One Speciation Air Sampling System STNS and Thermo Scientific Reference Ambient Air Sampler STNR, two Desert Research Institute Sequential Filter Samplers DRIF, and a continuous TEOM monitor (Thermo Scientific Tapered Element Oscillating Microbalance) were sampling air in parallel. These monitors differ not only in sampling configuration but also in protocol-specific sample analysis procedures. Measurements of PM(sub 2.5) mass and major contributing species were well correlated among the different methods with r-values > 0.8. Despite the good correlations, daily concentrations of PM(sub 2.5) mass and major contributing species were significantly different at the 95% confidence level from 5 to 100% of the time. Larger values of PM(sub 2.5) mass and individual species were generally reported from STNR and STNS. The January STNR average PM(sub 2.5) mass (8.8 (micro)g/per cubic meter) was 1.5 (micro)g/per cubic meter larger than the DRIF average mass. The July STNS average PM(sub 2.5) mass (27.8 (micro)g/per cubic meter) was 3.8 (micro)g/per cubic meter larger than the DRIF average mass. These differences can only be partially accounted for by known random errors. Variations in flow control, face velocity, and sampling artifacts likely influence the measurement of PM(sub 2.5) speciation and mass closure. Simple statistical tests indicate that the current uncertainty estimates used in the STN network may underestimate the actual uncertainty.

Haines, Jennifer C.↗
NASA NTRSDate not supplied

Exploring Anomalous PM 2.5 from Wildfires and Dust Storms using Data and Services at NASA GES DISC

The presence of fine particles in the atmosphere with a diameter of less than 2.5 µm, called particulate matter 2.5 (PM 2.5 ), poses a significant threat to human health as a criteria air pollutant. Fortunately, NASA's Goddard Earth Sciences Data and Information Services Center (GES DISC) provides easy access to several PM 2.5 concentration products. These datasets include the reanalysis of global hourly and monthly aerosol components including PM 2.5 data from the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2), as well as 3-hourly real-time ensemble forecasts of PM 2.5 from the Hazardous Air Quality Ensemble System (HAQES). The HAQES products are developed by the George Mason University Air Quality Laboratory as part of NASA's Health Air Quality Applied Science Team (HAQAST). The GES DISC is actively collaborating with scientists in the HAQAST program to further expand air quality data collections. Two new datasets are currently being archived: one is the machine learning-based global hourly PM 2.5 derived from MERRA-2; the other is the localized data (NO 2 , O 3 , and PM 2.5 ) time series derived from NASA's GEOS Composition Forecasting (GEOS-CF) system. In this presentation, we will explore the spatial patterns and long-distance transport characteristics of elevated PM 2.5 during extreme pollution events, such as the June 2023 Canadian wildfires, which are still active at the time of writing; and severe spring dust storms in 2023 over Asia. To gain comprehensive insights, we will utilize various PM 2.5 data in conjunction with satellite-observed aerosol data from TROPOspheric Monitoring Instrument (TROPOMI) on Sentinel-5P. The primary focus of this presentation will be to demonstrate effective use of data tools and services to visualize and explore extreme air pollution phenomena. Additionally, we will provide guidance on how users can download specific data of interest, facilitating further analysis and research in this critical area.

air quality↗
DOE OSTI2024

Characterizing PM 2.5 Emissions and Temporal Evolution of Organic Composition from Incense Burning in a California Residence

The chemical composition of incense-generated organic aerosol in residential indoor air has received limited attention in Western literature. In this study, we conducted incense burning experiments in a single-family California residence during vacancy. Here, we report the chemical composition of organic fine particulate matter (PM 2.5 ), associated emission factors (EFs), and gas-particle phase partitioning for indoor semivolatile organic compounds (SVOCs). Speciated organic PM 2.5 measurements were made using two-dimensional gas chromatography coupled with high-resolution time-of-flight mass spectrometry (GC×GC-HR-ToF-MS) and semivolatile thermal desorption aerosol gas chromatography (SV-TAG). Organic PM 2.5 EFs ranged from 7 to 31 mg g –1 for burned incense and were largely comprised of polar and oxygenated species, with high abundance of biomass-burning tracers such as levoglucosan. Differences in PM 2.5 EFs and chemical profiles were observed in relation to the type of incense burned. Nine indoor SVOCs considered to originate from sources other than incense combustion were enhanced during incense events. Time-resolved concentrations of these SVOCs correlated well with PM 2.5 mass (R 2 > 0.75), suggesting that low-volatility SVOCs such as bis(2-ethylhexyl)phthalate and butyl benzyl phthalate partitioned to incense-generated PM 2.5 . Both direct emissions and enhanced partitioning of low-volatility indoor SVOCs to incense-generated PM 2.5 can influence inhalation exposures during and after indoor incense use.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2013

Estimating Ground-Level PM(sub 2.5) Concentrations in the Southeastern United States Using MAIAC AOD Retrievals and a Two-Stage Model

Previous studies showed that fine particulate matter (PM(sub 2.5), particles smaller than 2.5 micrometers in aerodynamic diameter) is associated with various health outcomes. Ground in situ measurements of PM(sub 2.5) concentrations are considered to be the gold standard, but are time-consuming and costly. Satellite-retrieved aerosol optical depth (AOD) products have the potential to supplement the ground monitoring networks to provide spatiotemporally-resolved PM(sub 2.5) exposure estimates. However, the coarse resolutions (e.g., 10 km) of the satellite AOD products used in previous studies make it very difficult to estimate urban-scale PM(sub 2.5) characteristics that are crucial to population-based PM(sub 2.5) health effects research. In this paper, a new aerosol product with 1 km spatial resolution derived by the Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm was examined using a two-stage spatial statistical model with meteorological fields (e.g., wind speed) and land use parameters (e.g., forest cover, road length, elevation, and point emissions) as ancillary variables to estimate daily mean PM(sub 2.5) concentrations. The study area is the southeastern U.S., and data for 2003 were collected from various sources. A cross validation approach was implemented for model validation. We obtained R(sup 2) of 0.83, mean prediction error (MPE) of 1.89 micrograms/cu m, and square root of the mean squared prediction errors (RMSPE) of 2.73 micrograms/cu m in model fitting, and R(sup 2) of 0.67, MPE of 2.54 micrograms/cu m, and RMSPE of 3.88 micrograms/cu m in cross validation. Both model fitting and cross validation indicate a good fit between the dependent variable and predictor variables. The results showed that 1 km spatial resolution MAIAC AOD can be used to estimate PM(sub 2.5) concentrations.

aerosol optical depth↗
NASA NTRS2016

Evaluation of Different MODIS AOD Retrieval Algorithms for PM (sub 2.5) Estimation in the Western, Midwestern and Southeastern United States with Implications for Public Health

This study was part of the research activities of the Center for Applied Atmospheric Research and Education (CAARE) funded by the NASA MUREP (Minority University Research and Education Project) Institutional Research Opportunity (MIRO) Program. Satellite measurements of Aerosol Optical Depth (AOD) have been shown to be correlated with ground measurements of fine particulate matter less than 2.5 microns PM (sub 2.5), which in turn has been linked to respiratory and heart diseases. The strength of the correlation between AOD and PM (sub 2.5) varies for different AOD retrieval algorithms and geographic regions. We evaluated several Moderate Resolution Imaging Spectrometer (MODIS) AOD products from different satellites (Aqua vs. Terra), retrieval algorithms (Dark Target versus Deep Blue), Collections (5.1 versus 6) and spatial resolutions (10-kilometers versus 3-kilometers) for cities in the Western, Midwestern and Southeastern U.S. We developed and validated PM (sub 2.5) prediction models using remotely-sensed AOD data, which were improved by incorporating meteorological variables (temperature, relative humidity, precipitation, wind speed, and wind direction) from the North American Land Data Assimilation System Phase 2 (NLDAS-2). Adding these meteorological data significantly improved the predictive power of all the PM (sub 2.5) models, especially in the Western U.S. Temperature, relative humidity and wind speed were the most significant meteorological variables throughout the year in the Western U.S. Wind speed was the most significant meteorological variable for the cold season while temperature was the most significant variable for the warm season in the Midwestern and Southeastern U.S. Our study re-establishes the connection between PM (sub 2.5) and public health concerns including respiratory and cardiovascular diseases (asthma, high blood pressure, coronary heart disease, heart attack, and stroke). Using PM (sub 2.5) data and health data from the Centers for Disease Control and Prevention (CDC)'s Behavioral Risk Factor Surveillance System (BRFSS), our statistical analysis showed that heart attack and stroke occurrences had the strongest correlations with PM (sub 2.5).

Environmental Public Health↗
NASA NTRS2017

Full-Coverage High-Resolution Daily PM(sub 2.5) Estimation using MAIAC AOD in the Yangtze River Delta of China

Satellite aerosol optical depth (AOD) has been used to assess population exposure to fine particulate matter (PM (sub 2.5)). The emerging high-resolution satellite aerosol product, Multi-Angle Implementation of Atmospheric Correction(MAIAC), provides a valuable opportunity to characterize local-scale PM(sub 2.5) at 1-km resolution. However, non-random missing AOD due to cloud snow cover or high surface reflectance makes this task challenging. Previous studies filled the data gap by spatially interpolating neighboring PM(sub 2.5) measurements or predictions. This strategy ignored the effect of cloud cover on aerosol loadings and has been shown to exhibit poor performance when monitoring stations are sparse or when there is seasonal large-scale missngness. Using the Yangtze River Delta of China as an example, we present a Multiple Imputation (MI) method that combines the MAIAC high-resolution satellite retrievals with chemical transport model (CTM) simulations to fill missing AOD. A two-stage statistical model driven by gap-filled AOD, meteorology and land use information was then fitted to estimate daily ground PM(sub 2.5) concentrations in 2013 and 2014 at 1 km resolution with complete coverage in space and time. The daily MI models have an average R(exp 2) of 0.77, with an inter-quartile range of 0.71 to 0.82 across days. The overall Ml model 10-fold cross-validation R(exp 2) (root mean square error) were 0.81 (25 gm(exp 3)) and 0.73 (18 gm(exp 3)) for year 2013 and 2014, respectively. Predictions with only observational AOD or only imputed AOD showed similar accuracy.Comparing with previous gap-filling methods, our MI method presented in this study performed bette rwith higher coverage, higher accuracy, and the ability to fill missing PM(sub 2.5) predictions without ground PM(sub 2.5) measurements. This method can provide reliable PM(sub 2.5)predictions with complete coverage that can reduce biasin exposure assessment in air pollution and health studies.

PM2.5↗
NASA NTRS2024

Increased Atmospheric PM 2.5 Events Due to Open Waste Burning in Qaanaaq, Greenland, Summer of 2022

High levels of particulate matter (PM) are relevant to severe air pollution and can adversely impact human health. Maintaining healthy air quality for the residents of the Arctic region is essential to satisfy the no-one-left-behind policy of the Sustainable Development Goals (SDGs) by the United Nations. In this study, we installed a PM 2.5 measurement system in Qaanaaq, Greenland, and obtained the first continuous PM 2.5 measurements from 20 July to 13 August, 2022. We observed several increased PM2.5 events; relatively high PM 2.5 levels persisted from 8 August 2022. On the same day, visible black smoke emitted from the Qaanaaq dump site originated from open waste burning. By confirming less transboundary air pollution contributions from remote aerosol source regions to Qaanaaq during the measurement period using NOAA’s HYSPLIT backward trajectory analysis and NASA’s MERRA-2 aerosol re-analysis, we confirmed that the increased PM 2.5 was primarily due to local open waste burning with less contributions from transboundary air pollution. However, small contributions from biomass burning outside Greenland were plausible during the early measurement period. Additionally, NOAA’s HYSPLIT dispersion calculations suggested possible aerosol depositions from local open waste burning to nearby sea areas, such as Baffin Bay. Although the hourly mean PM 2.5 mass concentration was not alarmingly high during the measurement period, future studies should incorporate longer-term continuous PM 2.5 measurements along with other atmospheric chemical analyses to identify possible local air pollution sources in detail to ensure clean ambient air for the future in the Arctic. Our study provides quantitative evidence of the impact of open waste burning on air quality at a study site in Greenland, which could be crucial in developing air quality policies for this region in the Arctic.

aerosols↗
DOE OSTI2025

Evaluation and calibration of MERRA-2 and CAMS reanalysis for PM 2.5 in a semi-urbanized area in the south of the Amazon

Air pollution has significant implications for the climate and poses irreversible risks to human health. The Amazon region of Brazil is severely affected by biomass burning (BB) emissions, yet air quality monitoring remains highly inadequate. Given the scarcity of surface-based observations, reanalysis models have become essential tools for assessing air pollution. Although MERRA-2 and CAMS PM 2.5 products are widely utilized, their validation and comprehensive evaluation for the Amazon Basin remain limited. Here, this study assesses the performance of these products in a semi-urbanized region in the southern Amazon. The calibrated time series was employed to analyze PM 2.5 concentrations from 2003 to 2023. Our results showed satisfactory performance of both products for the 24-h averages of PM 2.5 , with linear correlations above 0.76. However, it was found that both products overestimate surface concentrations. MERRA-2 performed better, with approximately 30% lower bias than CAMS. Time series analysis showed that the study area is strongly impacted by emissions BB in the dry period, mainly in August and September. Furthermore, our findings indicate a positive trend in increasing PM 2.5 concentrations, with a notable rise observed since 2014. The average PM 2.5 levels frequently exceed the daily air quality guidelines established by the WHO in 2021. It has been estimated that the population of this region is exposed to concentrations above 15 μg.m -3 , on average, more than 30 days per year. Our results contribute to the evaluation of MERRA-2 and CAMS products for Amazon and provide a corrected estimate for surface PM 2.5 . Recent concerns about air quality and the implementation of new surface monitoring networks may improve the evaluation of reanalysis products. In the short term, the need for this information makes our assessments indispensable.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Assessing Indoor versus Outdoor PM 2.5 Concentrations during the 2025 Los Angeles Fires Using the PurpleAir Sensor Network

In January 2025, a series of fast-moving wildland-urban-interface (WUI) fires swept through the Los Angeles (LA) metropolitan area, causing severe air pollution. While the impacts of WUI fires on outdoor air quality have been extensively studied, indoor exposure remains less understood, despite most people sheltering indoors during WUI fires. Here, this study investigates the spatial and temporal patterns of indoor and outdoor PM 2.5 concentrations across the South Coast Air Basin, with a focus on LA County during the LA fires. Using high-resolution data from co-located indoor and outdoor PurpleAir (PA) sensors, we analyze hourly PM 2.5 levels and indoor/outdoor ratios. Outdoor PM 2.5 concentrations spiked sharply during the fires, reaching unhealthy levels exceeding 130 μg/m 3 , compared to the mean concentration (12 μg/m 3 ) during non-fire hours. Indoor concentrations also increased, though to a lesser extent, peaking around 60 μg/m 3 compared to a mean of 7 μg/m 3 during non-fire hours. This reflects the partial shielding that indoor environments provide from outdoor air pollution. The mean (0.42) and median (0.29) indoor/outdoor PM 2.5 ratios during LA fire hours were lower than the mean (0.93) and median (0.66) ratios during non-fire hours. Indoor/outdoor PM 2.5 ratios across sensors showed a wide distribution, reflecting differences in building characteristics and occupant behavior, such as indoor activities and the use of air purifiers. These findings emphasize the need for guidance and interventions to reduce indoor PM 2.5 exposure and protect public health during extreme WUI fire events.

2025 Los Angeles Fires↗
DOE OSTI2024

PM 2.5 Is Insufficient to Explain Personal PAH Exposure

To understand how chemical exposure can impact health, researchers need tools that capture the complexities of personal chemical exposure. In practice, fine particulate matter (PM 2.5 ) air quality index (AQI) data from outdoor stationary monitors and Hazard Mapping System (HMS) smoke density data from satellites are often used as proxies for personal chemical exposure, but do not capture total chemical exposure. Silicone wristbands can quantify more individualized exposure data than stationary air monitors or smoke satellites. However, it is not understood how these proxy measurements compare to chemical data measured from wristbands. In this study, participants wore daily wristbands, carried a phone that recorded locations, and answered daily questionnaires for a 7-day period in multiple seasons. We gathered publicly available daily PM 2.5 AQI data and HMS data. We analyzed wristbands for 94 organic chemicals, including 53 polycyclic aromatic hydrocarbons. Wristband chemical detections and concentrations, behavioral variables (e.g., time spent indoors), and environmental conditions (e.g., PM 2.5 AQI) significantly differed between seasons. Machine learning models were fit to predict personal chemical exposure using PM 2.5 AQI only, HMS only, and a multivariate feature set including PM 2.5 AQI, HMS, and other environmental and behavioral information. On average, the multivariate models increased predictive accuracy by approximately 70% compared to either the AQI model or the HMS model for all chemicals modeled. This study provides evidence that PM 2.5 AQI data alone or HMS data alone is insufficient to explain personal chemical exposures. Our results identify additional key predictors of personal chemical exposure.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2023

Assessing residential PM 2.5 concentrations and infiltration factors with high spatiotemporal resolution using crowdsourced sensors

Building conditions, outdoor climate, and human behavior influence residential concentrations of fine particulate matter (PM 2.5 ). To study PM 2.5 spatiotemporal variability in residences, we acquired paired indoor and outdoor PM 2.5 measurements at 3,977 residences across the United States totaling >10,000 monitor-years of time-resolved data (10-min resolution) from the PurpleAir network. Time-series analysis and statistical modeling apportioned residential PM 2.5 concentrations to outdoor sources (median residential contribution = 52% of total, coefficient of variation = 69%), episodic indoor emission events such as cooking (28%, CV = 210%) and persistent indoor sources (20%, CV = 112%). Residences in the temperate marine climate zone experienced higher infiltration factors, consistent with expectations for more time with open windows in milder climates. Likewise, for all climate zones, infiltration factors were highest in summer and lowest in winter, decreasing by approximately half in most climate zones. Large outdoor–indoor temperature differences were associated with lower infiltration factors, suggesting particle losses from active filtration occurred during heating and cooling. Absolute contributions from both outdoor and indoor sources increased during wildfire events. Infiltration factors decreased during periods of high outdoor PM 2.5 , such as during wildfires, reducing potential exposures from outdoor-origin particles but increasing potential exposures to indoor-origin particles. Time-of-day analysis reveals that episodic emission events are most frequent during mealtimes as well as on holidays (Thanksgiving and Christmas), indicating that cooking-related activities are a strong episodic emission source of indoor PM 2.5 in monitored residences.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Projected increases in wildfires may challenge regulatory curtailment of PM 2.5 over the eastern US by 2050

Anthropogenic contribution to the overall fine particulate matter (PM 2.5 ) concentrations has been declining sharply in North America. In contrast, a steep rise in wildfire-induced air pollution events with recent warming is evident in the region. Here, based on coupled fire–climate–ecosystem model simulations, summertime wildfire-induced PM 2.5 concentrations are projected to nearly double in North America by the mid-21st century compared to the present. More strikingly, the projected enhancement in fire-induced PM 2.5 (~1–2 µg m -3 ) and its contribution (~15 %–20 %) to the total PM 2.5 are distinctively significant in the eastern US. This can be attributed to downwind transport of smoke from future enhancement of wildfires in North America to the eastern US and associated positive climatic feedback on PM 2.5 , i.e., perturbations in circulation, atmospheric stability, and precipitation. Therefore, the anticipated reductions in PM 2.5 from regulatory controls on anthropogenic emissions could be significantly compromised in the future in the densely populated eastern US.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2014

International Space Station (ISS) External Thermal Control System (ETCS) Loop A Pump Module (PM) Jettison Options Assessment

On December 11, 2013, the International Space Station (ISS) experienced a failure of the External Thermal Control System (ETCS) Loop A Pump Module (PM). To minimize the number of extravehicular activities (EVA) required to replace the PM, jettisoning the faulty pump was evaluated. The objective of this study was to independently evaluate the jettison options considered by the ISS Trajectory Operations Officer (TOPO) and to provide recommendations for safe jettison of the ETCS Loop A PM. The simulation selected to evaluate the TOPO options was the NASA Engineering and Safety Center's (NESC) version of Program to Optimize Simulated Trajectories II (POST2) developed to support another NESC assessment. The objective of the jettison analysis was twofold: (1) to independently verify TOPO posigrade and retrograde jettison results, and (2) to determine jettison guidelines based on additional sensitivity, trade study, and Monte Carlo (MC) analysis that would prevent PM recontact. Recontact in this study designates a propagated PM trajectory that comes within 500 m of the ISS propagated trajectory. An additional simulation using Systems Tool Kit (STK) was run for independent verification of the POST2 simulation results. Ultimately, the ISS Program removed the PM jettison option from consideration. However, prior to the Program decision, the retrograde jettison option remained part of the EVA contingency plan. The jettison analysis presented showed that, in addition to separation velocity/direction and the atmosphere conditions, the key variables in determining the time to recontact the ISS is highly dependent on the ballistic number (BN) difference between the object being jettisoned and the ISS.

Murri, Daniel G.↗
NASA NTRS2018

Quantitative Daily Maps of PM 2.5 Episodes for California and Other Regions: Satellite Column Water and Optical Depth as Allied Tracers of Dilution

The Western US and many regions globally present daunting difficulties in understanding PM 2.5 episodes. We evaluate extensions of a method independent of modeled source-description and transport/transformation and using several satellite remote sensing products from imaging spectrometers. The San Joaquin Valley (SJV) especially suffers few-day episodes due to shallow mixing; PM 2.5 retrieval suffers low satellite AOT (Aerosol Optical Thickness) and bright surfaces.Nevertheless, we find residual errors in our maps of of typically 5-8 micrograms per cubic meter. Episodes in the Valley reaching 60-100 micrograms per cubic meter. These maps detail pollution from Interstate 5 at the scale of a few kilometers. The maps are based on NASA's MODerate resolution Imaging Spectrometer (MODIS) data at circa 1 kilometer as processed with the Multi-Angle Implementation of Atmospheric Correction. The Bay Area Air Quality Management District has requested that we test our methods in their challenging environment characterized by multiple sub-basins defined by complex topography. Our tests suggest that nearly similar precision may be expected for wintertime conditions with high PM 2.5 . We note difficulties when measured PM 2.5 is less than 8-10 micrograms per cubic meter, but good relative precision when PM 2.5 rises above 20; i.e. in episodes of concern for morbidity and mortality. Our method stresses physically meaningful functions of MODIS-MAIAC (Multi-Angle Implementation of Atmospheric Correction)-derived AOD (Aerosol Optical Depth) and total water vapor column. A mixed-effects statistical model exploiting existing station data works powerfully to allow us daily AOT-to-PM 2.5 relationships that allow a calibration of the map. In those cases where water vapor and particles have generally similar surface sources, using the ratio of AOT / Column_water can improve the daily calibrations so as to reach our quoted precision. We briefly present some cartoon idealizations that explain this success and also the likely reasons that our mixed effects model (or "daily calibration") works; also when it should not work. The combined satellite/mixed-effects model works best for wintertime San Joaquin Valley episodes, where the meteorology of particle and H2O(v) dilution is quite appropriate. We extended and tested the methodology (a) for the Bay Area wintertime situations and (b) for smoke plume events (e.g. the October 2017 fire events of the Sonoma area). Our SJV work was evaluated using NASA's DISCOVER-AQ (Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality) airborne measurements, and by season- long measurements in Fresno. If the composition and size distribution of the aerosols can be assessed for the regions we describe, retrievals should have improved accuracy.

Chatfield, Robert B.↗
DOE OSTI2024

Creep-Fatigue Properties of Additional 316H PM-HIP Materials Fabricated from Different Powder Compositions and Processing Routes

The process of powder metallurgy (PM) hot isostatic pressing (HIP) works by consolidating powdered materials at relatively high temperature and pressure to form near-net-shaped components. Ideally, PM-HIP production methods can reduce component lead time and improve designs for high-temperature reactors and/or microreactors. To introduce PM-HIP into Section III, Division 5 of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, it is necessary to show adequate material properties regarding creep, high-temperature low-cycle fatigue, and creep fatigue. However, prior work has shown that the creep-fatigue cycles to failure for PM-HIP 316H stainless steel are greatly reduced compared to the conventional, wrought product. This work continued creep-fatigue analysis on a 316H stainless steel with lower oxygen and nitrogen contents and at different HIP parameters than previously analyzed. The objective was to better understand what is causing the reduced PM-HIP 316H performance so improvements can be made PM-HIP 316H creep-fatigue lifetimes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Co-benefits of subnationally differentiated carbon pricing policies in China: Alleviation of heavy PM 2.5 pollution and improvement in environmental equity

Carbon policies differentiated according to regional disparities have been recognized and recommended. However, the air quality co-benefits of differentiated policies remain unclear. Here we combine a multi-regional dynamic computable general equilibrium (CGE) model and an extend response surface model (ERSM) to investigate the impact of nationally uniform and subnationally differentiated carbon pricing policies on fine particulate matter (PM 2.5 ) concentrations in China. All policies examined lead to the same accumulated national CO 2 emissions (2020–2050), with the 2030 emissions attaining China's national abatement target. We find that, when subnational policies differentiated according to provincial PM 2.5 concentrations are implemented, the higher-than-average carbon price over more polluted provinces results in twice as much reduction in CO 2 and air pollutant emissions in 2050 as the national policy. As a result, the subnational policies cause larger PM 2.5 concentration reductions in these provinces (9%–18%) than the national policy (7%–11%). Also, the subnational policies eliminate high PM 2.5 exposure of over 45 μg/m 3 which 12% people suffer from under the national policy. Overall, the subnational policies substantially reduce regional disparity in PM 2.5 pollution and hence improve environmental equity. The results suggest that subnationally differentiated carbon policies are a promising instrument to mitigate severe pollution and promote environmental equity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Fuel property impacts on gaseous and PM emissions from a multi-mode single-cylinder engine

The U.S. Department of Energy’s Co-Optima initiative has focused on improving fuel economy and vehicle performance while reducing emissions through the simultaneous development of emerging sustainable fuels with beneficial properties and advanced combustion strategies. A major thrust has been the development of advanced compression ignition (ACI) combustion strategies of gasoline range fuels in combination with spark-ignited (SI) combustion in a single engine capable of multi-mode operation to achieve high power density with enhanced part load efficiency. The aim of this study was to further the understanding of how emissions from both ACI and SI strategies operating on the same fuels in the same engine are impacted by different fuel properties. This investigation focused on particulate matter (PM) and gaseous hydrocarbon emissions from 6 different fuels across 3 different combustion modes on the same single-cylinder engine designed for multi-mode operation: SI combustion, partial fuel stratification (PFS), and spark-assisted compression ignition (SACI). In each of these modes, 3 different CA50 phasings were studied such that all 6 fuels could be studied at the same phasings. Three of the six different fuels used were specially formulated in a previous investigation to study the impact of fuel distillation and aromatic content while maintaining the research octane number (RON) and octane sensitivity. Additionally, neat isooctane and two ethanol containing fuels (RD5-87 and Co-Optima E30) were studied. Different fuel and phasing impacts on emissions were observed across the three combustion modes. Fuel properties were found to impact soot PM and particle number more than the CA50 phasing, while the phasing had more impact on NOx emissions. The NOx emissions were reduced in the PFS mode for all fuels compared to SI combustion, but the SACI combustion mode did not reduce NOx emissions. Although PFS produced low soot PM emissions like SI, total PM mass emissions were significantly higher due to large organic carbon (OC) PM mass contribution. Both PFS and SACI had greater particle number emission than SI operation with small nuclei mode particles dominating in PFS compared to large agglomeration particles in SACI.

42 ENGINEERING↗
DOE OSTI2022

Comparing structure-property evolution for PM-HIP and forged alloy 625 irradiated with neutrons to 1 dpa

The nuclear power industry has growing interest in qualifying powder metallurgy with hot isostatic pressing (PM-HIP) to replace traditional alloy fabrication methods for reactor structural components. But there is little known about the response of PM-HIP alloys to reactor conditions. This study directly compares the response of PM-HIP to forged Ni-base Alloy 625 under neutron irradiation doses ~0.5–1 displacements per atom (dpa) at temperatures ranging ~321–385 °C. Post-irradiation examination involves microstructure characterization, ASTM E8 uniaxial tensile testing, and fractography. Up through 1 dpa, PM-HIP Alloy 625 appears more resistant to irradiation-induced cavity nucleation than its forged counterpart, and consequently experiences significantly less hardening. This observed difference in performance can be explained by the higher initial dislocation density of the forged material, which represents an interstitial-biased sink that leaves a vacancy supersaturation to nucleate cavities. These findings show promise for qualification of PM-HIP Alloy 625 for nuclear applications, although higher dose studies are needed to assess the steady-state irradiated microstructure.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗