Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Plasma applications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Modeling and Simulation of a 5.8kV SiC PiN Diode for Inductive Pulsed Plasma Thruster Applications

Current ringing in an Inductive Pulsed Plasma Thruster (IPPT) can lead to reduced energy efficiency, excess heating, and wear on circuit components such as capacitors and solid state devices. Clamping off the current using a fast turn-off power diode is an effective way to reduce current ringing and increase energy efficiency. A diode with a shorter reverse recovery time will allow the least amount of current to ring back through the circuit, as well as minimize switching losses. The reverse recovery response of a new 5.8 kilovolt SiC PiN diode from Cree, Inc. in the IPPT plasma drive circuit is investigated using a physicsbased Simulink model, and compared with that of a 5SDF 02D6004 5.5 kilovolt fast-switching Si diode from ABB. Parameter extraction was carried out for each diode using both datasheet specifications and experimental waveforms, in order to most accurately adapt the model to the specific device. Further experimental data will be discussed using a flat-plate IPPT developed at NASA Marshall Space Flight Center and used to verify the simulation results. A final quantitative measure of circuit efficiency will be described for both the Si and SiC diode configuration.

Toftul, Alexandra↗
NASA NTRS1992

Vacuum plasma spray applications on liquid fuel rocket engines

The vacuum plasma spray process (VPS) has been developed by NASA and Rocketdyne for a variety of applications on liquid fuel rocket engines, including the Space Shuttle Main Engine. These applications encompass thermal barrier coatings which are thermal shock resistant for turbopump blades and nozzles; bond coatings for cryogenic titanium components; wear resistant coatings and materials; high conductivity copper, NaRloy-Z, combustion chamber liners, and structural nickel base material, Inconel 718, for nozzle and combustion chamber support jackets.

Mckechnie, T. N.↗
NASA NTRS1974

Applications of plasma core reactors to terrestrial energy systems

Plasma core reactors offer several new options for future energy needs in addition to space power and propulsion applications. Power extraction from plasma core reactors with gaseous nuclear fuel allows operation at temperatures higher than conventional reactors. Highly efficient thermodynamic cycles and applications employing direct coupling of radiant energy are possible. Conceptual configurations of plasma core reactors for terrestrial applications are described. Closed-cycle gas turbines, MHD systems, photo- and thermo-chemical hydrogen production processes, and laser systems using plasma core reactors as prime energy sources are considered. Cycle efficiencies in the range of 50 to 65 percent are calculated for closed-cycle gas turbine and MHD electrical generators. Reactor advantages include continuous fuel reprocessing which limits inventory of radioactive by-products and thorium-U-233 breeder configurations with about 5-year doubling times.-

Latham, T. S.↗
DOE OSTI2025

Perspectives and challenges of ultra-high temperature ceramics for fusion plasma-facing applications

Ultra-high temperature ceramics (UHTCs) offer several potential advantages as plasma-facing components (PFCs) in fusion reactors due to their extreme melting points, tailorable thermal conductivity, and attractive unirradiated mechanical properties including fracture toughness comparable or superior to tungsten. Here, recent developments and material properties of UHTCs are briefly reviewed, along with an overview of limited studies on their responses to neutron irradiation and an evaluation of plasma-surface interactions. Five key research pathways, primarily focused on irradiation effects, for advancing UHTCs in PFC applications are discussed: (1) assessing irradiation effects on the coupled thermal–mechanical performance (2) addressing the lack of studies on irradiation, plasma-surface interactions, and their synergistic effects; (3) investigating high-temperature (>1000 °C) neutron irradiation effects critical for PFC performance; (4) optimizing multi-component UHTC compositions or composites to improve thermal or mechanical properties; (5) enhancing radiation resistance to mitigate microcracking and void swelling through strategies such as increasing sink strength by reducing grain size, introducing fine particles, and leveraging complex concentrated alloy concepts.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Research on Uranium Plasmas and their Technological Applications

Uranium plasmas applied to nuclear rocket engines, MHD generators, nuclear lasers, and plasma stability and flow. The proceedings of a symposium held January 7-8, 1970 in Gainesville, Florida, and sponsored by the National Aeronautics and Space Administration and the University of Florida.

Karlheinz Thom↗
NASA NTRS1979

Method for decomposing observed line shapes resulting from multiple causes - Application to plasma charge-exchange-neutral spectra

A method is given for decomposing the widths of observed spectral lines resulting from unresolved line splitting, additive kinetic processes of different types, instrumental broadening (slit function), Doppler broadening, etc. all superimposed. The second moments are used as measures of the various widths involved. The method is not applicable if dispersion type (Lorentz) broadening occurs. Application is made to plasma charge-exchange-neutral spectra of hydrogen, deuterium, and helium.

Patch, R. W.↗
NASA NTRS1981

Polarized radiation from hot plasmas and applications to AM Herculis binaries

Absorption coefficients for the ordinary and extraordinary modes are calculated for cyclotron radiation from hot plasmas with temperatures between 0.2 and 20 keV. The results are applied to the accretion columns of the AM Herculis binaries. The linear and circular polarization properties of the observed polarized light can be understood if the emission is at approximately the fifth harmonic of the cyclotron frequency. The magnetic fields in these systems is deduced to be roughly 4 x 10 to the 7th gauss.

Chanmugam, G.↗
NASA NTRS2004

Modeling of Sheath Ion-Molecule Reactions in Plasma Enhanced Chemical Vapor Deposition of Carbon Nanotubes

In many plasma simulations, ion-molecule reactions are modeled using ion energy independent reaction rate coefficients that are taken from low temperature selected-ion flow tube experiments. Only exothermic or nearly thermoneutral reactions are considered. This is appropriate for plasma applications such as high-density plasma sources in which sheaths are collisionless and ion temperatures 111 the bulk p!asma do not deviate significantly from the gas temperature. However, for applications at high pressure and large sheath voltages, this assumption does not hold as the sheaths are collisional and ions gain significant energy in the sheaths from Joule heating. Ion temperatures and thus reaction rates vary significantly across the discharge, and endothermic reactions become important in the sheaths. One such application is plasma enhanced chemical vapor deposition of carbon nanotubes in which dc discharges are struck at pressures between 1-20 Torr with applied voltages in the range of 500-700 V. The present work investigates The importance of the inclusion of ion energy dependent ion-molecule reaction rates and the role of collision induced dissociation in generating radicals from the feedstock used in carbon nanotube growth.

Hash, David B.↗
DOE OSTI2025

Sheath transitions in a cylindrical filament discharge: Axisymmetric 1D3V PIC-MCC simulations

We present the first nonplanar hot cathode discharge simulations that capture the role of the trapped-ions plasma, elucidating new phenomena unobservable in planar geometric discharges. A discharge struck between a single emitting wire filament cathode and a bounding anode is simulated in cylindrical geometry using an axisymmetric (radial) particle-in-cell Monte-Carlo collisions code. Operating the discharge near its ionization energy threshold can lead to the formation of a two plasma mode (TPM). One plasma forms in the conventional upstream region through electron impact ionization of background neutrals. A second plasma, whose global effect on the discharge was not previously well understood, forms downstream through the trapping of cold ions in the potential well of the filament’s virtual cathode, a process enabled by ion-neutral charge exchange collisions. Three space charge regions intersperse the electrode gap—an emissive sheath between the cathode filament and trapped-ions plasma, a double layer between the two plasmas, and a classical sheath between the upstream plasma and the outer anode. Simulations exhibit mode transitions and quenching instabilities that transform the discharge between the TPM and other single-plasma sheath modes that include classical (temperature-limited), space charge limited, and inverse (anode glow) modes. The transitions are explained via “aid-and-compete” dynamics wherein the growth of one plasma enhances growth in the other while concurrently exhibiting expansion dynamics antagonistic to each other. The system exhibits strong hysteresis memory during the mode transitions. Improved understanding and control of these sheath mode transitions are expected to benefit plasma applications with hot cathodes.

Electrical hysteresis↗
NASA NTRS1987

The infrared diagnostic of a dusty plasma with applications to supernova remnants

IRAS observations of infrared emission from supernova remnants constitute the first observational evidence of shock-heated dust in the interstellar medium. These observations can provide valuable information on the morphology of supernova remnants, and on their interaction with the ambient interstellar medium. In particular, they can be used to study the physical condition and the cooling rate of dusty astrophysical plasmas. In this paper, consideration is given to the possibilities and limitations of using the infrared observations as a diagnostic for the shocked gas, and as a means of determining remnant parameters. The paper presents improved calculations for the cooling rate of a dusty plasma by means of gas-grain collisions, and the equilibrium temperature of the dust for a variety of plasma conditions. These results are then used to define the density-temperature parameter space of the plasma, which, given its infrared spectrum, should be occupied by the observed remnant. This constraint can be used to estimate distances to supernova remnants and to set limits on various parameters that determine their evolution. The analysis is applied to the remnants Cas A and the Cygnus Loop.

Dwek, Eli↗
NASA NTRS2010

Development and Application of Plasma Actuators for Active Control of High-Speed and High Reynolds Number Flows

Active flow control is often used to manipulate flow instabilities to achieve a desired goal (e.g. prevent separation, enhance mixing, reduce noise, etc.). Instability frequencies normally scale with flow velocity scale and inversely with flow length scale (U/l). In a laboratory setting for such flow experiments, U is high, but l is low, resulting in high instability frequency. In addition, high momentum and high background noise & turbulence in the flow necessitate high amplitude actuation. Developing a high amplitude and high frequency actuator is a major challenge. Ironically, these requirements ease up in application (but other issues arise).

Sammy, Mo↗
DOE OSTI2025

Operando XPS in reactive plasmas: The importance of the wall reactions

In this article, advancements in differential pumping and electron optics over the past few decades have enabled x-ray photoelectron spectroscopy (XPS) measurements at (near-)ambient pressures, bridging the pressure gap for characterizing realistic sample chemistries. Recently, we have demonstrated the capabilities of an ambient pressure XPS setup for in situ plasma environment measurements, allowing plasma-surface interactions to be studied in operando rather than using the traditional before-and-after analysis approach. This new “plasma-XPS” technique facilitates the identification of reaction intermediates critical for understanding plasma-assisted surface processes relevant to semiconductor nanomanufacturing, such as physical vapor deposition, etching, atomic layer deposition, and many other plasma applications. In this paper, we apply the plasma-XPS approach to monitor real-time surface chemical changes on a model Ag(111) single crystal exposed to oxidizing and reducing plasmas. We correlate surface-sensitive data with concurrent gas-phase XPS measurements and residual gas mass-spectrum analysis of species generated during plasma exposure, highlighting the significant role of plasma-induced chamber wall reactions. Ultimately, we demonstrate that plasma-XPS provides comprehensive insights into both surface and gas-phase chemistry, establishing it as a versatile and dynamic characterization tool with broad applications in microelectronics research. Finally, we outline potential enhancements and future metrology directions to advance plasma-XPS investigations further.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Interpreting AI for fusion: An application to plasma profile analysis for tearing mode stability

Artificial intelligence models have demonstrated strong predictive capabilities for various instabilities in fusion devices such as Tokamaks, including tearing modes (TM), edge localized modes, and disruptive events, but their opaque nature raises concerns about safety and trustworthiness when applied to fusion power plants. Here, we present a physics-based interpretation framework using a TM prediction model as a demonstration that is validated through a dedicated DIII-D TM avoidance experiment. By applying Shapley analysis, we identify how profiles such as rotation, temperature, and density contribute to the model's prediction of TM stability. Our analysis shows that in our experimental scenario, core electron temperature and rotation peaking play the primary role in TM stability, while density changes have smaller effects on stability. We show that off-axis ion temperature stabilizes TMs, suggesting that off-axis neutral beam heating can further stabilize this scenario. This work presents a generalizable ML-based event prediction methodology, from training to physics-driven interpretation, bridging the gap between physics understanding and opaque ML models.

Farre-Kaga, Hiro J. [Princeton Univ., NJ (United S↗
NASA NTRS2004

Magnetic-Nozzle Studies for Fusion Propulsion Applications: Gigawatt Plasma Source Operation and Magnetic Nozzle Analysis

This project has been a multiyear effort to assess the feasibility of a key process inherent to virtually all fusion propulsion concepts: the expansion of a fusion-grade plasma through a diverging magnetic field. Current fusion energy research touches on this process only indirectly through studies of plasma divertors designed to remove the fusion products from a reactor. This project was aimed at directly addressing propulsion system issues, without the expense of constructing a fusion reactor. Instead, the program designed, constructed, and operated a facility suitable for simulating fusion reactor grade edge plasmas, and to examine their expansion in an expanding magnetic nozzle. The approach was to create and accelerate a dense (up to l0(exp 20)/m) plasma, stagnate it in a converging magnetic field to convert kinetic energy to thermal energy, and examine the subsequent expansion of the hot (100's eV) plasma in a subsequent magnetic nozzle. Throughout the project, there has been a parallel effort between theoretical and numerical design and modelling of the experiment and the experiment itself. In particular, the MACH2 code was used to design and predict the performance of the magnetoplasmadynamic (MPD) plasma accelerator, and to design and predict the design and expected behavior for the magnetic field coils that could be added later. Progress to date includes the theoretical accelerator design and construction, development of the power and vacuum systems to accommodate the powers and mass flow rates of interest to out research, operation of the accelerator and comparison to theoretical predictions, and computational analysis of future magnetic field coils and the expected performance of an integrated source-nozzle experiment.

Gilland, James H.↗
NASA NTRS1992

Arc-cathode interaction study

Insufficient electrode life and uncertainties in that life are major problems hampering the development in many plasma application areas which make use of plasma torches, arc heaters, and arc jet thrusters. In spite of a considerable amount of work published dealing with arc-cathode phenomena, our present understanding is still incomplete because different physical phenomena dominate for different combinations of experimental parameters. The objective of our present research project is to gain a better understanding of the behavior of arc-cathode surface interaction over a wide range of parameters, and furthermore to develop guidelines for better thermal design of the electrode and the selection of materials. This report will present the research results and progress obtained on the arc-cathode interaction studies at the University of Minnesota. It includes results which have been obtained under programs other than the NASA funded program. Some of the results have been submitted in an informal interim progress report, and all of the results have been presented in a seminar during a visit to the NASA Lewis Research Center on October 16, 1992.

Zhou, X.↗