Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Permittivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Complex permittivity of lanthanum aluminate in the 20 to 300 K temperature range from 26.5 to 40.0 GHz

Dielectric constants of microwave substrates are required in the design of superconducting microwave circuits at various temperatures. In this paper, the results are reported of a study of the complex permittivity of the newly developed lanthanum aluminate (LaAlO3) substrate, in the 20 to 300 K temperature range at frequencies from 26.5 to 40.0 GHz. The value of the complex permittivity was obtained by measuring the sample scattering parameters using a microwave waveguide technique. It is observed that, while the dielectric constant did not change appreciably with frequency, its value decreased by approximately 14 percent from room temperature to 20 K.

Miranda, F. A.↗
NASA NTRS2012

Adjusting Permittivity by Blending Varying Ratios of SWNTs

A new composite material of singlewalled carbon nanotubes (SWNTs) displays radio frequency (0 to 1 GHz) permittivity properties that can be adjusted based upon the nanotube composition. When varying ratios of raw to functionalized SWNTs are blended into the silicone elastomer matrix at a total loading of 0.5 percent by weight, a target real permittivity value can be obtained between 70 and 3. This has particular use for designing materials for microwave lenses, microstrips, filters, resonators, high-strength/low-weight electromagnetic interference (EMI) shielding, antennas, waveguides, and low-loss magneto-dielectric products for applications like radome construction.

Tour, James M.↗
NASA NTRS2011

Exact Cavity Perturbation Technique to Determine Complex Permittivity of Dielectric Materials

Cassini is an international spacecraft mission facilitated by NASA and ESA which seeks to understand the Saturn planetary system, including rings and moons. Launched in 1997, the Cassini spacecraft contains two major components: the Cassini orbiter that has been orbiting Saturn since October 2004, and the European-built Huygens probe that landed on Titan's surface in December 2004 to study its geology and atmosphere. Titan, Saturn's largest moon and the second largest moon in the solar system, possesses surface and atmospheric features similar to those of Earth, including lakes, seas, and mountains. A physical characterization of these features is critical to understanding the origin and evolution of Titan, whose surface composition reflects its geological history. Because Titan's atmosphere is largely composed of methane, it is believed that surfaces lakes are filled with mixtures of liquid hydrocarbons. The Cassini orbiter's RADAR instrument has been scanning Titan's surface at the atmosphere-penetrating microwave frequency of 13.8 Gigahertz since 2004. However, accurate interpretation of these data is limited by a lack of knowledge regarding dielectric properties of liquid hydrocarbons at cryogenic temperatures. Therefore, it is of specific interest to experimentally determine values for the complex permittivities of various liquid hydrocarbon mixtures at the surface conditions of Titan. In particular, more accurate values for complex permittivity would improve estimates of lake depth and surface composition obtained from the instrument's altimetry and backscatter modes.

dielectric constant↗
NASA NTRS1995

An Electrothermodynamic Model With Distributed Properties for Effective Permittivities of Sea Ice

This paper presents a model to calculate the temperature dependence of effective permittivities for a heterogeneous anisotropic medium containing multiphase scatters. With the strong permittivity fluctuation approach, the model is developed to account for the electrodynamic scattering effect together with the quasi-static characteristics of multiple species and subspecies of inhomogeneities with distributed orientations, sizes, and shapes.

sea↗
NASA NTRS2021

Permittivity Measurement System Using Stripline Method for the Europa Clipper Mission

High radiation Jovian environment can deposit electrons in highly resistive dielectric materials, which could result in internal electrostatic discharge (IESD) causing damage to sensitive electronics such as the radar for Europa Assessment and Sounding: Ocean to Near-Surface (REASON) instrument on NASA’s Europa Clipper mission. Special dielectric materials like static dissipative Polyetheretherketone (PEEK) ESD are under consideration for the Europa Clipper mission. PEEK loaded with carbon nanofibers improves the ESD performance for this material but the RF characteristics are unknown. We have developed a method to characterize the dielectric constant of a material as a function of frequency and temperature down to 30K. We present the measurement results of four samples of ESD. The measured data shows the permittivity of TECAPEEK ESD 11 is in the range of 7 to 10 at HF and in the range of 6.8 to 8.3 for VHF frequencies. The change in permittivity of ESD 11 down to 30 K is less than 7% at HF and less than 3% at VHF frequency. The sample to sample variability can be attributed to the inhomogeneity of the material.

Decrossas, Emmanuel↗
NASA NTRS1976

Permittivity of water at millimeter wave-lengths

Work performed on the permittivity of seawater and ice at 100 GHz was described. Measurements on water covered the temperature range from 0 to 50 C, while the measurements on ice were taken near - 10 C. In addition, a small number of measurements were made on the reflectivity of absorber materials used in a previous program on research in millimeter wave techniques. Normal incidence reflectivity was measured, and the result was used to obtain the index of refraction. For the case of normal incidence, reflectivity at a fixed temperature was reproducible to 1% for values near 40%. For reflectivity measurements on ice, the lack of attenuation leads to reflection from the back surface of the sample; this complication was circumvented by using a wedge shaped sample and freezing the water in a container lined with absorber material.

Blue, M. D.↗
NASA NTRS1979

Measuring the permittivity of gases and aerosols

Two-coupler microwave technique measures complex permittivity utilizing waveguide which encloses gas or aerosol. Using technique, blower continuously circulates substances to keep them homogeneous.

Trett, W. J.↗
NASA NTRS1985

Dispersion characteristics for wide slotlines on low-permittivity substrates

A spectral-domain Galerkin method is used to calculate the dispersion characteristics of wide slotlines on low-permittivity substrates that are electrically thin. The range of parameters covered are d/lambda sub 0 = 0.006-0.06, W/lambda sub 0 = 0.005-2.0, and epsilon sub r = 2.22, 3.0, 3.8, and 9.8. The choice of expansion and testing functions makes possible the extraction of the asymptotic form of the infinite integrals, resulting in a computationally efficient solution. The agreement between calculated and measured slot wavelengths on narrow and wide slots is generally within 2.0 percent over 2-6 GHz.

Janaswamy, R.↗
NASA NTRS1989

Causality of plasma permittivity with loss and restoring terms

The causality of the complex permittivity for a plasma model in which both loss and restoring terms are included is shown. Discussions as to what occurs in this causality property when the loss and restoring terms vanish are presented. Results are shown to agree with earlier work.

Cockrell, C. R.↗
NASA NTRS1990

Measurement of the complex refractive index and complex dielectric permittivity of T.P.S. Space Shuttle tile materials at millimeter wavelengths

Complex refractive index and dielectric permittivity studies of presently used Space Shuttle tile materials at millimeter wavelengths reveal these tiles to exhibit similar absorption characteristics to those of fused silica materials. This absorption is mainly related to the water content in the specimen. A strong birefringence is observed at least in one of these fibrous refractory composite materials.

Afsar, Mohammed Nurul↗
NASA NTRS1997

W-Band Free Space Permittivity Measurement Setup for Candidate Radome Materials

This paper presents a measurement system used for w-band complex permittivity measurements performed in NASA Langley Research Center's Electromagnetics Research Branch. The system was used to characterize candidate radome materials for the passive millimeter wave (PMMW) camera experiment. The PMMW camera is a new technology sensor, with goals of all-weather landings of civilian and military aircraft. The sensor is being developed under a NASA Technology Reinvestment program with TRW, McDonnell- Douglas, Honeywell, and Composite Optics, Inc. as participants. The experiment is scheduled to be flight tested on the Air Force's 'Speckled Trout' aircraft in late 1997. The camera operates at W-band, in a radiometric capacity and generates an image of the viewable field. Because the camera is a radiometer, the system is very sensitive to losses. Minimal transmission loss through the radome at the operating frequency, 89 GHz, was critical to the success of the experiment. This paper details the design, set-up, calibration and operation of a free space measurement system developed and used to characterize the candidate radome materials for this program.

Fralick, Dion T.↗
NASA NTRS1972

Complex permittivity measurements of lunar samples at microwave and millimeter wavelengths

The relative dielectric constant and loss tangent of lunar sample 14163,164 (fine dust) were determined as a function of density at 9.375, 24, 35, and 60 GHz. In addition, such measurements have also been performed on lunar sample 14310,74 (solid rock) at 9.375 GHz. The loss tangent was found to be frequency independent at these test frequencies and had a value of 0.015 for the lunar dust sample.

Bassett, H. L.↗
NASA NTRS1973

Complex permittivity measurements during high temperature recycling of space shuttle antenna window and dielectric heat shield materials

The research performed and the data obtained on candidate space shuttle antenna window and heat shield materials are presented. The measurement technique employs a free-space focused beam microwave bridge for obtaining RF transmission data, and a device which rotates a sample holder which is heated on one side by natural gas-air flames. The surface temperature of each sample is monitored by IR pyrometry; embedded and rear surface thermocouples are also used in obtaining temperature data. The surface of the sample undergoing test is subjected to approximately the same temperature/time profile that occurs at a proposed antenna position on the space shuttle as it re-enters. The samples are cycled through ten of these temperature profiles to determine the recycling effects. Very little change was noted in the materials due to the recycling.

Bassett, H. L.↗
NASA NTRS1978

An empirical model for the complex dielectric permittivity of soils as a function of water content

The recent measurements on the dielectric properties of soils shows that the variation of dielectric constant with moisture content depends on soil types. The observed dielectric constant increases only slowly with moisture content up to a transition point. Beyond the transition it increases rapidly with moisture content. The moisture value of transition region was found to be higher for high clay content soils than for sandy soils. Many mixing formulas were compared with, and were found incompatible with, the measured dielectric variations of soil-water mixtures. A simple empirical model was proposed to describe the dielectric behavior of ths soil-water mixtures. The relationship between transition moisture and wilting point provides a means of estimating soil dielectric properties on the basis of texture information.

Wang, J. R.↗