Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The mechanisms of fine particle generation and electrification during Mount St. Helens volcanic eruption

Microscopical investigation of volcanic ash collected from ground stations during Mount St. Helens eruptions reveal a distinctive bimodel size distribution with high concentrations of particle ranges at (1) 200-100 microns and (2) 20-0.1 microns. Close examination of individual particles shows that most larger ones are solidified magma particles of porous pumice with numerous gas bubbles in the interior and the smaller ones are all glassy fragments without any detectable gas bubbles. Elemental analysis demonstrates that the fine fragments all have a composition similar to that of the larger pumice particles. Laboratory experiments suggest that the formation of the fine fragments is by bursting of glassy bubbles from a partially solidified surface of a crystallizing molten magma particle. The production of gas bubbles is due to the release of absorbed gases in molten magma particles when solubility decreases during phase transition. Diffusion cloud chamber experiments strongly indicate that sub-micron volcanic fragments are highly hygroscopic and extremely active as cloud condensation nuclei. Ice crystals also are evidently formed on those fragments in a supercooled (-20 C) cloud chamber. It has been reported that charge generation from ocean volcanic eruptions is due to contact of molten lava with sea water. This seems to be insufficient to explain the observed rapid and intense lightning activities over Mount St. Helens eruptions. Therefore, a hypothesis is presented here that highly electrically charged fine solid fragments are ejected by bursting of gas bubbles from the surface of a crystallizing molten magma particles.

Cheng, R. J.↗
NASA NTRS1974

Improved dispensing targets for ion beam particle generators

Beam impinges on palladium-silver tube, which is target, and heats impinged surface causing local hot spot. Contained gas diffuses through hot spot to meet incoming beam and produce desired particles. When beam is turned off, target spot cools and stops dispensing contained gas.

Miller, C. G.↗
NASA NTRS1974

Dispensing targets for ion beam particle generators

A target for dispensing high energy protons or neutrons or ionized atoms or ionized molecules is provided which comprises a container for the target gas, which is at atmospheric or higher pressure. The container material can release the target gas in the spot where the container is heated above a predetermined temperature by the impact of an ion beam where protons or neutrons are desired, or by electrons where ionized atoms or molecules are desired. On the outside of the container, except for the region where the beam is to impact, there is deposited a layer of a metal which is imperious to gaseous diffusion. A further protective coating of a material is placed over the layer of metal, except at the region of the ion impact area in order to adsorb any unreacted gas in the vacuum in which the target is placed, to thereby prevent reduction of the high vacuum, as well as contamination of the interior of the vacuum chamber.

Miller, C. G.↗
NASA NTRS2012

Evolution of Combustion-Generated Particles at Tropospheric Conditions

This paper describes particle evolution measurements taken in the Particulate Aerosol Laboratory (PAL). The PAL consists of a burner capable of burning jet fuel that exhausts into an altitude chamber that can simulate temperature and pressure conditions up to 13,700 m. After presenting results from initial temperature distributions inside the chamber, particle count data measured in the altitude chamber are shown. Initial particle count data show that the sampling system can have a significant effect on the measured particle distribution: both the value of particle number concentration and the shape of the radial distribution of the particle number concentration depend on whether the measurement probe is heated or unheated.

Tacina, Kathleen M.↗
NASA NTRS1985

Performance Test of Laser Velocimeter System for the Langley 16-foot Transonic Tunnel

An investigation in the Langley 16-Foot Transonic Tunnel has been conducted in which a laser velocimeter was used to measure free-stream velocities from Mach 0.1 to 1.0 and the flow velocities along the stagnating streamline of a hemisphere-cylinder model at Mach 0.8 and 1.0. The flow velocity was also measured at Mach 1.0 along the line 0.533 model diameters below the model. These tests determined the performance characteristics of the dedicated two-component laser velocimeter at flow velocities up to Mach 1.0 and the effects of the wind tunnel environment on the particle-generating system and on the resulting size of the generated particles. To determine these characteristics, the measured particle velocities along the stagnating streamline at the two Mach numbers were compared with the theoretically predicted gas and particle velocities calculated using a transonic potential flow method. Through this comparison the mean detectable particle size (2.1 micron) along with the standard deviation of the detectable particles (0.76 micron) was determined; thus the performance characteristics of the laser velocimeter were established.

Meyers, J. F.↗
NASA NTRS1976

An Atmospheric Cloud Physics Laboratory for the Space Laboratory

Results of research and engineering analyses to date show that it is feasible to develop and fly on the first Spacelab mission a multipurpose laboratory in which experiments can be performed on the microphysical processes in atmospheric clouds. The paper presents a series of tables on the Atmospheric Cloud Physics Laboratory, with attention given to experiment classes, the preliminary equipment list (particle generators, optical and imaging devices, particle detectors and characterizers, etc.), initial equipment (scientific equipment subsystems and flight support subsystems), and scientific functional requirements (the expansion chamber, the continuous flow diffusion chamber, the static diffusion chamber, the humidifier, and particle generators).

Smith, R.↗
NASA NTRS1993

Gas-evaporation in low-gravity field (cogelation mechanism of metal vapors) (M-14)

When metal and alloy compounds are heated and vaporized in a rare gas such as helium, argon, or xenon, the vaporized substances diffused in the rare gas are supersaturated resulting in a smoke of fine particles of the material congealing as snow or fog. The gas vaporizing method is a fine particle generation method. Though the method has a variety of applications, the material vapor flow is disturbed by gravitational convection on Earth. The inability to elucidate the fine particle generation mechanism results in an obstruction to improving the method to mass production levels. As no convection occurs in microgravity in space, the fine particle generation mechanism influenced only by diffusion can be investigated. Investigators expect that excellent particles with homogeneous diameter distribution can be obtained. Experiment data and facts will assist in improving efficiency, quality, and scale or production processes including element processes such as vaporization, diffusion, and condensation. The objective of this experiment is to obtain important information related to the mechanism of particle formation in the gas atmosphere (smoke particles) and the production of submicron powders of extremely uniform size.

Wada, N.↗
NASA NTRS1976

ULF wave generation through particle precipitation induced by VLF transmitters

The paper examines the feasibility of a technique to simulate ULF waves in the ionosphere using controlled particle precipitation. In the proposed model of micropulsation generation, a pulse from a VLF ground transmitter (or satellite transmitter) is injected into the magnetosphere and follows the earth's static magnetic field lines to a region near the magnetic equatorial plane where it begins to interact strongly with energetic electrons through gyroresonance. VLF emissions are produced in the gyroresonance interaction, and numerous energetic electrons are scattered into the loss cone, proceeding down the magnetic field lines and precipitating into the lower ionosphere where they create large-scale enhancements of ionization. The results lend support to the idea of attempting to produce detectable ULF waves by using ground- or satellite-based VLF transmitters.

Bell, T. F.↗
NASA NTRS1977

Generator of droplet tracers for holographic flow visualization in water tunnels

Design of a tracer-particle generator for use in holographic flow visualization of complex flow fields is discussed. Desired characteristics of the tracer particles, including a size range of 20 to 200 microns, a spherical shape to facilitate focusing of holograms, and a fluid density near that of ambient particles, are reviewed; a particle injection rate of 100 to 1000 per sec in water tunnels with flow velocities between one and 10 meters per sec is also desirable. The operation of the particle generator, which produces uniform droplets with the specified optical properties, is described.

Charwat, A. F.↗
NASA NTRS1996

Test-Aerosol Generator For Calibrating Particle Counters

Apparatus generates clean, stable aerosol stream for use in testing and calibrating laser-based aerosol-particle counter. Size and concentration of aerosol particles controlled to ensure accurate calibration. Cheap, widely available medical nebulizers used to generate aerosols.

Mogan, Paul A.↗
NASA NTRS1987

Particle data reduction in Japan

The characterization of atomized particles generated by various atomizer and the mechanics of their evaporation and combustion processes were studied. The need existed for visualizing the internal structure of flames including evaporation and combustion processes as well as for a better way of understanding spray particle generation mechanisms and internal structures. A particle sizer based on Fraunhofer diffraction for detecting particle size and in-line Fraunhofer holograms for observation of local spray particles were used. A novel visualizing technique based on Computer Technology was developed and is discussed.

Nakayama, Mitsushige↗
NASA NTRS1983

Warm fog dispersal

The charged particle generator was further tested after some design modification. The generator performance was measured with additional instrumentation and found to confirm previous measurements. Plans for a field testing were than developed. The overall status of the program and the field test plans were presented to a group of atmospheric scientists and electrostatic experts at the NASA/MSFC sponsored USRA Workshop on Electrostatic Fog Dispersal at NCAR, Boulder, Colorado discussed in previous sections. The recommendations from this workshop are being evaluated as to whether NASA should proceed with the field test or whether further theoretical research on the phenomenon of electrostatic fog dispersal and additional development of the charged particle generator should be carried out. Information obtained from the USRA Workshop clearly identified three physical mechanisms that could possibly influence the fog dispersal process, which heretofore have not been considered, and which may provide additional insight to the direction of further fog dispersal work. These mechanisms are: the effect of corona discharge on the electric field strength at the surface, the influx of fog into the cleared volume by turbulent diffusion, and the increase in supersaturation as liquid water is removed, activating haze particles, and thus generating more fog. Plans are being formulated to investigate these mechanisms.

Frost, W.↗
NASA NTRS1987

Wave generation and particle transport in the plasma sheet and boundary layer

The one and two ion beam instability was considered as a possible explanation for the observations of broadband electrostatic noise in the plasma sheet region of the geomagnetic tail. When only hot streaming plasma sheet boundary layer ions were present, no broadband waves were excited. Cold, streaming ionospheric ions can generate electrostatic broadband waves propagating in the slow beam-acoustic mode, but the growth rates of the waves were significantly enhanced when warm boundary layer ions were presented. (Both the slow and fast beam-acoustic modes can be excited, depending on the relative ion drift.) This mode predicted that the wave intensity of the broadband noise should peak in the plasma sheet boundary layer (PSBL). Observations of less intense electrostatic waves in the lobes and plasma sheet were likely a result of the absence of warm ion beams or large ion temperatures, respectively, which resulted in smaller growth rates. The model dependence of the ion beam instability has also been studied. For cold and warm ions streaming in the same direction, researchers found wave growth peaked for wave normal angles theta = 0 deg. and wave frequencies approx. 0.1 x the electron plasma frequency. However, for anti-parallel streaming cold and warm ions, wave growth peaks near theta = 90 deg. and wave frequencies were an order of magnitude smaller.

Dusenbery, P. B.↗
NASA NTRS1991

Generation of Particles and Seeding

One of the most important elements in laser velocimetry, yet the most neglected, is the small particle embedded in the flow field that scatters the light necessary to make velocity measurements. An attempt to remove the confusion in choosing a seeding method by assessing many of the techniques currently used is presented. Their characteristics and typical limitations imposed by various applications are outlined. The ramifications of these methods on measurement accuracy are addressed.

Meyers, James F.↗
NASA NTRS1994

Generation of Particles and Seeding

One of the most important elements in laser velocimetry, yet the most neglected, is the small particle embedded in the flow field that scatters the light necessary to make velocity measurements. The characteristics of this small particle are often ignored in the effort to obtain data. This seems strange since it is the primary cause of measurement error. If the particle is too large, it will not follow the flow resulting in an inaccurate representation of the fluid velocity. If the particle is too small, it will not scatter sufficient light to provide the signal-to-noise necessary to minimize measurement uncertainty in the signal processing electronics. This lecture will attempt to remove the confusion in choosing a seeding method by assessing many of the techniques currently used. It will outline their characteristics and typical limitations imposed by various applications. The lecture will then focus on the ramifications of these methods on measurement accuracy.

Meyers, James F.↗