SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
PdBr2(PH12(C2N)3)2 crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of four 1,3,5-triaza-7-phosphaadamantane molecules and two palladium(ii) bromide molecules.
PdCl2PdCl4(RhNCl)2(N2O)2(N2Cl)2 crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of two ac1l8io8 molecules; four hydroxylamine, o-amino- molecules; two palladium(ii) chloride molecules; four N2Cl clusters; and four RhNCl clusters. In each N2Cl cluster, N+0.20+ is bonded in a single-bond geometry to one Cl1- atom. The N–Cl bond length is 1.53 Å. Cl1- is bonded in a distorted bent 120 degrees geometry to two equivalent N+0.20+ atoms. In each RhNCl cluster, Rh4+ is bonded in a 1-coordinate geometry to one N+0.20+ atom. The Rh–N bond length is 1.82 Å. N+0.20+ is bonded in a distorted bent 120 degrees geometry to one Rh4+ and one Cl1- atom. The N–Cl bond length is 1.66 Å. Cl1- is bonded in a single-bond geometry to one N+0.20+ atom.
PdCl2CNO crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of four amine-formaldehyde molecules and four palladium(ii) chloride molecules.
Co-deposition electrochemical cells are a simple means to examine novel nuclear reactions. In this study, palladium and deuterium atoms were co-deposited on a cathode at stoichiometric densities, forming dendritic morphologies. Bubble detector neutron dosimeters were used to measure equivalent dose levels during electrolytic deposition. Standard configuration cells expected to produce excess neutrons were denoted as experimental cells and contained an electrolyte consisting of palladium(II) chloride, lithium chloride, and heavy water. The control cells used copper(II) chloride, lithium chloride, and heavy water electrolyte. Experimental and control cells were supplied current, increasing from 0.1 to 100.0 mA over a period of 20 days. For test days 9 through 20, the standard configuration experimental cells exhibited significantly higher average neutron radiation than the controls at a 99% confidence level. Alternative configurations involving more increasing current over a shortened time scale, substitutions of water in place of heavy water or potassium chloride for lithium chloride, as well as inclusion of depleted uranium near the cell cathodes all resulted in inconclusive evidence for promoting neutron production.
To produce a noble metal-on-metal oxide catalyst on an inert, high-surface-area support material (that functions as a catalyst at approximately room temperature using chloride-free reagents), for use in a carbon dioxide laser, requires two steps: First, a commercially available, inert, high-surface-area support material (silica spheres) is coated with a thin layer of metal oxide, a monolayer equivalent. Very beneficial results have been obtained using nitric acid as an oxidizing agent because it leaves no residue. It is also helpful if the spheres are first deaerated by boiling in water to allow the entire surface to be coated. A metal, such as tin, is then dissolved in the oxidizing agent/support material mixture to yield, in the case of tin, metastannic acid. Although tin has proven especially beneficial for use in a closed-cycle CO2 laser, in general any metal with two valence states, such as most transition metals and antimony, may be used. The metastannic acid will be adsorbed onto the high-surface-area spheres, coating them. Any excess oxidizing agent is then evaporated, and the resulting metastannic acid-coated spheres are dried and calcined, whereby the metastannic acid becomes tin(IV) oxide. The second step is accomplished by preparing an aqueous mixture of the tin(IV) oxide-coated spheres, and a soluble, chloride-free salt of at least one catalyst metal. The catalyst metal may be selected from the group consisting of platinum, palladium, ruthenium, gold, and rhodium, or other platinum group metals. Extremely beneficial results have been obtained using chloride-free salts of platinum, palladium, or a combination thereof, such as tetraammineplatinum (II) hydroxide ([Pt(NH3)4] (OH)2), or tetraammine palladium nitrate ([Pd(NH3)4](NO3)2).
Data package for manuscript "Climatic Imprint on Interfacially-Controlled Platinum-Palladium Resources" by Emily G. Wright, Ivey Wang, Yihang Fang, Elaine D. Flynn, and Jeffrey G. Catalano. This dataset contains adsorption results from experiments designed to investigate the effect of chloride on Pd(II) adsorption to goethite and Pt(II) adsorption to hematite and goethite, including lab experiments, X-ray absorption fine structure spectroscopy, and models of retention within a laterite. See the associated manuscript for full methods information. The file "Wright2025_PtAds_data.csv" contains the target starting Pt concentration (uM), final aqueous Pt and associated error (in uM), calculated adsorbed Pt and associated error (in umol/m2), target and measured aqueous chloride (mM), target aqueous nitrate (mM), final pH, and mineral concentration/loading (g/L). Associated mineral-free controls (mineral loading = 0 g/L) are included; the aqueous Pd error was not calculated and chloride was not measured in every sample. These data appear in Figures 1, S3, S4, S5, S20, and S22 in the associated manuscript. The file "Wright2025_PdAds_data.csv" contains the target starting Pd concentration (uM), final aqueous Pd and associated error (in uM), calculated adsorbed Pd and associated error (in umol/m2), target and measured aqueous chloride (mM), and mineral concentration/loading (g/L). Associated mineral-free controls (mineral loading = 0 g/L) are included; the aqueous Pd error was not calculated and chloride was not measured in every sample. These data appear in Figures 1, S3, S4, S5, and S20 in the associated manuscript. The file "Wright2025_MineralBatches_data.csv" contains the mineral identity and BET specific surface area (m2/g) for every mineral batch synthesized and used in experiments. The annealing time used is listed for hydrothermally annealed goethite. These data appear in Table S2 in the associated manuscript. The file "Wright2025_XRD_data.csv" contains the XRD patterns for every mineral batch synthesized as the counts as a function of two theta (in degrees). See "Wright2025_MineralBatches_data.csv" for more details on specific mineral batches. These data appear in Figure S2 in the associated manuscript. The file "Wright 2025_ZetaPotential_data.csv" contains the measured zeta potentials for samples of goethite (batch G2) at pH 4 the presence of varying amounts of sodium chloride. These data appear in Table S3 in the associated manuscript. The file "Wright2025_XAFSSamples_data.csv" contains the specific mineral batch, measured final aqueous Pd or Pt (uM), measured final aqueous chloride (mM), and estimated adsorbed Pd or Pt (umol/m2) of all XAFS samples. These data appear in Tables S4, S7, S8, and S10 in the associated manuscript. The files "Wright2025_PdXAFS_data.csv" and "Wright2025_PtXAFS_data.csv" contain the normalized spectra of Pd and Pt, respectively, adsorbed to minerals at varying chloride concentrations. See "Wright2025_XAFSSamples_data.csv" for a guide to sample names. Note that "05" in a sample name is equivalent to "0.5". These data appear in Figures 2, S6, S7, S8, S12, S13, and S14 in the associated manuscript. The file "Wright2025_LateriteProfileProfileModelParameters_data.csv" include the ratio of hematite to hematite and goethite in two synthetic, modeled profiles, as well as the modeled surface areas of goethite and hematite as a function of relative depth within the modeled weathering zone. These data were used, in conjunction with equations presented in the paper, to calculate the theoretical concentrations of Pd and Pt (and the resulting Pt/Pd ratio) within the profiles. These data appear in Figure 3 in the associated manuscript. The file "Wright2025_Imagery_data.zip" is a zipped folder containing the TEM and STEM images appear in Figures S18 and S19. Individual files are labeled as either STEM (Fig. S18) or TEM (Fig. S19) with a letter representing the part of the multipart figure.
We have prepared cationic palladium complexes possessing a new zwitterionic ligand bis-N,N’–1-(2,4,6-triphenylpyridyl) oxalamide [(N ^ N)Pd(Me)(L)] + [BArF] - , (BArF=3,5-(CF 3 ) 2 C 6 H 3 , L=NCMe, CO). The structure of [(N ^ N)Pd(Me)(CO)] + [BArF] - was determined by X-ray diffraction analysis. Energy Decomposition Analysis (EDA) indi-cates this N ^ N zwitterionic ligand is more electron-donating relative to bidentate diimine ligands. Low temperature NMR analysis shows the existence of linkage isomers with the N ^ N isomer the most stable. Structures were assigned using NMR and DFT analysis. Barriers to interconversion of isomers are ΔG ‡ = 10-12 kcal/mol. Kinetics of acetoni-trile displacement from [(N ^ N)Pd(Me)(NCCH 3 )] + [BArF] - by CD 3 CN, ethylene and t Bu 3 P were measured and mechanisms of exchange determined. The ethylene complex, [(N ^ N)Pd(Me)(C 2 H 4 )] + was generated at -45 °C, and the barrier of migrato-ry insertion determined at 0 °C (ΔG ‡ = 23.4 kcal/mol) and compared to related diimine complexes. The methyl carbonyl complex undergoes migratory insertion in the presence of CO at -70 to -55 °C (ΔG ‡ = ca. 15.7 kcal/mol) to yield the acyl carbonyl complex. Furthermore, the neutral bis-trimethylsilylmethyl complex [(N ^ N)Pd(CH 2 SiMe 3 ) 2 was prepared and characterized by X-ray diffraction analysis. It displays dynamic behavior at very low temperatures in the NMR spectrum (-90 °C, ΔG ‡ =7.9 kcal/mol) which, supported by DFT analysis, is ascribed to rotation of the bulky -CH 2 SiMe 3 groups.
We report a series of redox-active bis(pincer) Pd( ii ) complexes in which the redox active units are based on either a diarylamido or a carbazolide framework.
Synthesis of end-functionalized poly(norbornene)s (PNBs) and poly(ethylidenenorbornene)s (PENBs) were prepared using the palladium catalyst t Bu 3 PPdMeCl/NaBAr f in combination with chain transfer agents (CTAs) 4-penten-1-ol and 10-undecenal. These CTAs produce polymers end-capped with -OH and -CHO groups, respectively, in high yields with M n values in the range of 6K to 17K, depending on the molar ratio of the CTA: monomer. End-functionalized PNBs and PENBs with precisely controlled Mn values and very narrow molecular weight distributions were accessed by using 4-penten-1-ol and 10-undecenal as chain-terminating agents following living polymerizations in which monomer is completely consumed. The utility of the aldehyde-functionalized polymers is illustrated via coupling to a dye molecule and by synthesis of ambiphilic diblock copolymers, PNB-b-PEG and PENB-b-PEG.
Polyolefins are by far the most ubiquitous industrially produced polymers and are primarily produced by early transition metal catalysts. These catalysts are not functional group tolerant, and copolymerization of ethylene and polar vinyl monomers is quite challenging. Furthermore, early metal catalysts convert ethylene to linear polyethylene, and introduction of branches requires addition of comonomers. In this Account, we describe our efforts in designing and implementing new Pd(II) and Ni(II) olefin polymerization catalysts based on mechanistic understanding of the chain growth process. Here, the original hindered nickel- and palladium-aryl-substituted diimine complexes were discovered in 1995. The key to the success of these now “classic” systems in generating high polymers rather than dimers or oligomers was realizing that incorporation of ortho-disubstituted aryl groups partially blocks the axial sites of the metal and thus retards the rate of chain transfer relative to propagation. Two key features of these late metal catalysts distinguish them from early metal complexes. First, they tolerate certain functional groups, which allows copolymerization of olefins with polar comonomers. Second, they can form a branched polymer from ethylene without the need to add α-olefin comonomers. Importantly, for nickel catalysts, branching levels can be modulated by changing reaction conditions, such as temperature and monomer pressure.
Photodynamic therapy (PDT) is a promising treatment for certain cancers that proceeds via sensitization of ground state 3 O 2 to generate reactive 1 O 2 . Classic macrocyclic tetrapyrrole ligand scaffolds, such as porphyrins and phthalocyanines, have been studied in detail for their 1 O 2 photosensitization capabilities. Despite their compelling photophysics, these systems have been limited in PDT applications because of adverse biological side effects. Conversely, the development of non-traditional oligotetrapyrrole ligands metalated with palladium (Pd[DMBil1]) have established new candidates for PDT that display excellent biocompatibility. Herein, the synthesis, electrochemical, and photophysical characterization of a new family of 2,18-bis(phenylalkynyl)-substituted Pd II 10,10-dimethyl-5,15-bis(pentafluorophenyl)-biladiene (Pd[DMBil2-R]) complexes is presented. These second generation biladienes feature extended conjugation relative to previously characterized Pd II biladiene scaffolds (Pd[DMBil1]). We show that these new derivatives can be prepared in good yield and, that the electronic nature of the phenylalkynyl appendages dramatically influence the Pd II biladiene photophysics. Extending the conjugation of the Pd[DMBil1] core through installation of phenylacetylene resulted in a ~75 nm red-shift of the biladiene absorption spectrum into the phototherapeutic window (600–900 nm), while maintaining the Pd II biladiene's steady-state spectroscopic 1 O 2 sensitization characteristics. Varying the electronics of the phenylalkyne groups via installation of electron donating or withdrawing groups dramatically influences the steady-state spectroscopic and photophysical properties of the resulting Pd[DMBil2-R] family of complexes. The most electron rich variants (Pd[DMBil2-N(CH3)2]) can absorb light as far red as ~700 nm but suffer from significantly reduced ability to sensitize formation of 1 O 2 . By contrast, Pd[DMBil2-R] derivatives bearing electron withdrawing functionalities (Pd[DMBil2-CN] and Pd[DMBil2-CF3]) display 1 O 2 quantum yields above 90%. The collection of results we report suggest that excited state charge transfer from more electron-rich phenyl-alkyne appendages to the electron deficient biladiene core circumvents triplet sensitization. The spectral and redox properties, as well as the triplet sensitization efficiency of each Pd[DMBil2-R] derivative is considered in relation to the Hammett value (σp) for each biladiene's R-group. More broadly, the results reported in this study clearly demonstrate that biladiene redox properties, spectral properties, and photophysics can be perturbed greatly by relatively minor alterations to biladiene structure.
Palladium-based catalysts are often used in carbon dioxide (CO 2 ) hydrogenation reactions with different possible reaction pathways producing methanol, methane, formic acid, or carbon monoxide. We used ambient pressure X-ray photoelectron spectroscopy (AP-XPS) to understand the surface reaction mechanism of CO 2 hydrogenation on Pd(111). AP-XPS results show that the order in which the reactants are introduced yields different initial surface species. In a CO 2 and H 2 mixture, carbonaceous species (CH x , C*, PdC x ) are formed upon heating Pd(111) at 400 K and above. In addition, a Pd(111) sample pre-exposed to an elevated pressure of H 2 followed by evacuation to ultrahigh vacuum (UHV) can store enough hydrogen atoms in the subsurface and bulk to provide a hydrogen source for the CO 2 hydrogenation reaction to occur when exposed to CO 2 gas alone. In conclusion, the formation of carbonaceous species likely occurs through the decomposition of a transient CH x O intermediate facilitated by low-coordinated sites and surface defects.
Abstract C−H amination and amidation by catalytic nitrene transfer are well‐established and typically proceed via electrophilic attack of nitrenoid intermediates. In contrast, the insertion of (formal) terminal nitride ligands into C−H bonds is much less developed and catalytic nitrogen atom transfer remains unknown. We here report the synthesis of a formal terminal nitride complex of palladium. Photocrystallographic, magnetic, and computational characterization support the assignment as an authentic metallonitrene (Pd−N) with a diradical nitrogen ligand that is singly bonded to Pd II . Despite the subvalent nitrene character, selective C−H insertion with aldehydes follows nucleophilic selectivity. Transamidation of the benzamide product is enabled by reaction with N 3 SiMe 3 . Based on these results, a photocatalytic protocol for aldehyde C−H trimethylsilylamidation was developed that exhibits inverted, nucleophilic selectivity as compared to typical nitrene transfer catalysis. This first example of catalytic C−H nitrogen atom transfer offers facile access to primary amides after deprotection.
Nitron, has been employed as a “crypto-N-heterocyclic carbene” to afford 1,2,4-triazolylidene compounds of nickel, palladium and iridium. Significantly, the ligand derived from Nitron, namely Nitron NHC , affords catalytic systems, as illustrated by the ability of the iridium compound (Nitron NHC )Ir(CO) 2 Cl to effect (i) dehydrogenation of formic acid, (ii) aldehyde hydrosilyation, (iii) dehydrocoupling of hydrosilanes and alcohols, and (iv) ketone reduction via transfer hydrogenation.
Abstract C−H amination and amidation by catalytic nitrene transfer are well‐established and typically proceed via electrophilic attack of nitrenoid intermediates. In contrast, the insertion of (formal) terminal nitride ligands into C−H bonds is much less developed and catalytic nitrogen atom transfer remains unknown. We here report the synthesis of a formal terminal nitride complex of palladium. Photocrystallographic, magnetic, and computational characterization support the assignment as an authentic metallonitrene (Pd−N) with a diradical nitrogen ligand that is singly bonded to Pd II . Despite the subvalent nitrene character, selective C−H insertion with aldehydes follows nucleophilic selectivity. Transamidation of the benzamide product is enabled by reaction with N 3 SiMe 3 . Based on these results, a photocatalytic protocol for aldehyde C−H trimethylsilylamidation was developed that exhibits inverted, nucleophilic selectivity as compared to typical nitrene transfer catalysis. This first example of catalytic C−H nitrogen atom transfer offers facile access to primary amides after deprotection.
A well-defined palladium complex [(tBuXPhos)Pd(Me)(BAr f )] bearing a bulky monophosphine ligand was synthesized and fully characterized. X-ray diffraction analysis shows that the 1,3,5-triisopropylaryl group of the dialkylbiaryl phosphine ligand exhibits a weak η 6 -interaction with the Pd(II) center. This catalyst exhibits excellent functional group tolerance and polymerizes propargyl esters containing benzoyl and acetyl groups, propargyl methyl ether, propargyl alcohol, benzyl acetylene, and phenyl acetylene to yield polymers with M n values in the range of 5–15 kDa with monomodal molecular weight distributions between ca. 1.4 and 2.1.
Synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) was used to study the adsorption and surface chemistry of methanol on a Cu 3 Pd(111) model surface. The composition and morphological properties of the pristine Cu 3 Pd(111) substrate were analyzed using a combination of low-energy electron diffraction (LEED), scanning tunneling microscopy (STM), and low-energy ion scattering (LEIS). The results of ion scattering showed segregation of Pd toward the surface, with a Pd/Cu ratio close to 0.5, a larger value than the ratio of 0.33 expected for a Cu 3 Pd bimetallic structure. The surface of the alloy exhibited a good LEED pattern with three-fold long-range periodicities. In STM, clusters of palladium with hexagonal arrays and Pd- Pd distances of 2.7-2.8 Å were detected. Bonding to copper perturbed the electronic properties of the atoms in the Pd clusters, shifting their 4d states toward higher binding energy with respect to the Fermi level. Further, the valence band spectrum of Cu 3 Pd(111) exhibited a line shape that was very different from those displayed by Cu(111) or Pd(111). At low pressures, the adsorption of methanol on Cu 3 Pd(111) at 300 K mainly produced CH 3 O, CO and CH x species. AP-XPS showed that most Pd atoms in the surface of the Cu 3 Pd(111) alloy interacted with the decomposition products of methanol. No significant changes were observed in the core levels of copper upon the adsorption and dissociation of methanol, suggesting that the molecule mainly interacted with Pd sites of the alloy. Reaction with hydrogen led to fast removal of CH x , C and PdC x species from Cu 3 Pd(111) at moderate (< 450 K) temperatures and prevented a CH x → C transformation. If the stability of adsorbed CH 3 O is used as a descriptor for the hydrogenation of CO 2 to methanol, Cu 3 Pd should be a much better catalyst than monometallic palladium. This may be a consequence of electronic and ensemble effects in the alloy that moderate the reactivity of Pd sites.