Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PYRROLES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Propagator quantum chemical study of S-cis-(Z)-2-(2-formylethenyl)pyrrole: electronic structure and aspects of intramolecular hydrogen bond manifestation in ionization spectra

For the purpose of investigation of the electronic structures of functionalized pyrroles with potential biological activity the electronic structures and ionization spectra of S-cis-(Z)-2-(2-formylethenyl)pyrrole (FP) were calculated by the propagator quantum chemical method. The calculations were performed using the third-order algebraic diagrammatic construction method (ADC(3)) for one-particle Green´s function (electronic propagator) and the 6–31G** basis set. Going from FP (possessing the intramolecular hydrogen bond H⋯O) to its conformation FPR (without H⋯O bonding), the O1s-ionization energy and the ionization energy of the σ-type lone electron pair orbital of the O atom decrease by ~0.2 eV, which is a consequence of stopping the electron density transfer from the O atom. A strong electron density transfer through the hydrogen bond from the O atom to the NH group occurs in the nitrogen core level ionization spectrum as evidenced by a lower N1s-ionization energy of FP (by ~0.7 eV ) compared to that of FPR. The valence shell ionization spectra of FP and FPR calculated using the ADC(3) method are characterized by a high density of the satellite states. The results obtained indicate that the electronic structures of the compounds of the considered class are characterized by pronounced effects of electron correlation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Revisiting the relaxation dynamics of isolated pyrrole

Herein, the interpretation of the femtosecond-scale temporal evolution of the pyrrole ion signal, after excitation in the 267–217 nm interval, recently published by our group [R. Montero, A. Peralta Conde, V. Ovejas, M. Fernández-Fernández, F. Castaño, J. R. Vázquez de Aldana, and A. Longarte, J. Chem. Phys.137, 064317 (2012)] is re-visited. The observation of a shift in the pyrrole{sup +} transient respect to zero delay reference, initially attributed to ultrafast dynamics on the πσ{sup *} type state (3s a{sub 1} ← π 1a{sub 2}), is demonstrated to be caused by the existence of pump + probe populated states, along the ionization process. The influence of these resonances in pump-prone ionization experiments, when multi-photon probes are used, and the significance of a proper zero-time reference, is discussed. The possibility of preparing the πσ{sup *} state by direct excitation is investigated by collecting 1 + 1 photoelectron spectra, at excitation wavelengths ranging from 255 to 219 nm. No conclusive evidences of ionization through this state are found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Pyrrophens: Pyrrole-Based Hexadentate Ligands Tailor-Made for Uranyl (UO 2 2+ ) Coordination and Molecular Recognition

Derivatives of a novel pyrrole-containing Schiff base ligand system (called “pyrrophen”) are presented which feature substituted phenylene linkers (R 1 = R 2 = H (H 2 L 1 ); R 1 = R 2 = CH 3 (H 2 L 2 )) and a binding pocket modeled after macrocyclic species. These ligands bind neutral CH 3 OH in the solid state through pyrrolic hydrogen-bonding. Here, the interaction of the uranyl cation (UO 2 2+ ) and H 2 L 1–2 yields planar hexagonal bipyramdial uranyl complexes, while the Cu 2+ and Zn 2+ complexes were found to self-assemble as dinuclear helicate complexes (M 2 L 2 ) with H 2 L 1 under identical conditions. The favorable binding of UO 2 2+ over Zn 2+ provides insight into the molecular recognition of uranyl over other metal species. Structural features of these complexes are examined with special attention to features of the UO 2 2+ coordination environment which distinguish them from other related salophen and porphyrinoid complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Ab initio multiple cloning simulations of pyrrole photodissociation: TKER spectra and velocity map imaging

In this study, we report a detailed computational simulation of the photodissociation of pyrrole using the ab initio Multiple Cloning (AIMC) method implemented within MOLPRO. The efficiency of the AIMC implementation, employing train basis sets, linear approximation for matrix elements, and Ehrenfest configuration cloning, allows us to accumulate significant statistics. We calculate and analyze the total kinetic energy release (TKER) spectrum and Velocity Map Imaging (VMI) of pyrrole and compare the results directly with experimental measurements. Both the TKER spectrum and the structure of the velocity map image (VMI) are well reproduced. Previously, it has been assumed that the isotropic component of the VMI arises from long time statistical dissociation. Instead, our simulations suggest that ultrafast dynamics contributes significantly to both low and high energy portions of the TKER spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Ultrafast internal conversion dynamics of highly excited pyrrole studied with VUV/UV pump probe spectroscopy

We study the relaxation dynamics of pyrrole after excitation with an 8 eV pump pulse to a state just 0.2 eV below the ionization potential using vacuum ultraviolet/ultraviolet pump probe spectroscopy. Our measurements in conjunction with electronic structure calculations indicate that pyrrole undergoes rapid internal conversion to the ground state in less than 300 fs. We find that internal conversion to the ground state dominates over dissociation

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2012

Oxoanion Recognition by Benzene-based Tripodal Pyrrolic Receptors

Two new tripodal receptors based on pyrrole- and dipyrromethane-functionalised derivatives of a sterically geared precursor, 1,3,5-tris(aminomethyl)-2,4,6-triethylbenzene, are reported; these systems, compounds 1 and 2, display high affinity and selectivity for tetrahedral anionic guests, in particular dihydrogen phosphate, pyrophosphate and hydrogen sulphate, in acetonitrile as inferred from isothermal titration calorimetry measurements. Support for the anion-binding ability of these systems comes from theoretical calculations and a single-crystal X-ray diffraction structure of the 2:2 (host:guest) dihydrogen phosphate complex is obtained in the case of the pyrrole-based receptor system, 1. Keywords anion receptors, dihydrogen phosphate, hydrogen sulphate, X-ray structure, theoretical calculations.

08 HYDROGEN↗
DOE OSTI2013

Ethyl 1,4-bis(4-chlorophenyl)-2-methyl-1 H -pyrrole-3-carboxylate

In the title molecule, C20H17Cl2NO2, the pyrrole moiety makes dihedral angles of 63.42 (11) and 70.43 (12) with the chlorobenzene rings. The ethoxycarbonyl unit is present in a synperiplanar conformation with respect to the pyrrole ring, as indicated by the dihedral angle of 14.5 (3). In the crystal, molecules are linked into chains parallel to the a-axis direction by weak C—HO hydrogen bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1967

Pyrroles and related compounds. X.

Pyrroles and related compounds, analyzing mass spectra and fragmentation of pyrromethanes, pyrromethenes, pyrroketones and pyrrolic analogues

Budzikiewicz, H.↗
NASA NTRS1986

Effect of counterions on the formation of ohmic contact between p-Si and poly(pyrrole) film - An ac impedance analysis

Conditions under which poly(pyrrole) (PP) films form ohmic contact with single-crystal p-Si are described. Counterions affect both the conductivity and flatband potential, V(FB), values of poly(pyrrole). While paratoluene-sulfonate-doped PP acts like a switch, the impedance behavior of PP films doped with ClO4(-), BF4(-), or PF6(-) allows evaluation of the V(FB) of these films. The formation of 'quasi-ohmic' and 'nonohmic' contacts, respectively, of PP (ClO4) and PP films doped with other counterions, with p-Si, are explained in terms of conductivity of these films and V(FB) of PP films with respect to that of p-Si. PP film seems to passivate or block intrinsic surface states present on p-Si surface.

Nagsubramanian, G.↗
DOE OSTI2018

Selective Solid-liquid Extraction and Liquid-liquid Extraction of Lithium Chloride using Strapped Calix[4]pyrroles

LiCl is a classic "hard" ion salt that is present in lithium-rich brines and a key component in end-of-life materials (i.e., used lithium-ion batteries). Its isolation and purification from like salts is a recognized challenge with potential strategic and economic implications. Here in this paper, we describe two ditopic calix[4]pyrrole-based ion pair receptors (2 and 3), that are capable of selectively capturing LiCl. Under solid-liquid extraction conditions, using 2 as the extractant, LiCl could be separated from a NaCl-KCl salt mixture containing as little as 1% LiCl with ~100% selectivity, while receptor 3 achieved similar separations when the LiCl level was as low as 200 ppm. Under liquid-liquid extraction conditions using nitrobenzene as the non-aqueous phase, the extraction preference displayed by 2 is KCl > NaCl > LiCl. Lastly, in contrast, 3 exhibits high selectivity towards LiCl over NaCl and KCl, with no appreciable extraction being observed for the latter two salts.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Pyrrole Modified 3,4‐Propylenedioxythiophene Conjugated Polymer as Hole Transport Layer for Efficient and Stable Perovskite Solar Cells

Despite the outstanding electric properties and cost-effectiveness of poly(3,4-ethylenedioxythiophene) (PEDOT) and its derivatives, their performance as hole transport layer (HTL) materials in conventional perovskite solar cells (PSCs) has lagged behind that of widely used spirobifluorene-based molecules or poly(triaryl amine). This gap is mainly from their poor solubility and energy alignment mismatch. In this work, the design and synthesis of a pyrrole-modified HTL (PPr) based on 3,4-propylenedioxythiophene (ProDOT) are presented for efficient and stable PSCs. As a result of the superior defects passivation ability, excellent contact with perovskite, enhanced hole extraction, and high hydrophobicity, the unencapsulated PPr-based PSCs showed the peak PCE of 21.49% and outstanding moisture stability (over 4000 h). This work highlights the potential application of ProDOT-based materials as HTL for PSCs and underscores the importance of the rational design of PEDOT and its derivatives.

14 SOLAR ENERGY↗
DOE OSTI2012

Quantum Monte Carlo for the x-ray absorption spectrum of pyrrole at the nitrogen K-edge

Fixed-node diffusion Monte Carlo (FNDMC) is used to simulate the x-ray absorption spectrum of a gas-phase pyrrole molecule at the nitrogen K-edge. Trial wave functions for core-excited states are constructed from ground-state Kohn-Sham determinants substituted with singly occupied natural orbitals from configuration interaction with single excitations calculations of the five lowest valence-excited triplet states. The FNDMC ionization potential (IP) is found to lie within 0.3 eV of the experimental value of 406.1 {+-} 0.1 eV. The transition energies to anti-bonding virtual orbitals match the experimental spectrum after alignment of IP values and agree with the existing assignments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

State-specific tunneling lifetimes from classical trajectories: H-atom dissociation in electronically excited pyrrole

A trajectory method of calculating tunneling probabilities from phase integrals along straight line tunneling paths, originally suggested by Makri and Miller [J. Chem. Phys. 91, 4026 (1989)] and recently implemented by Truhlar and co-workers [Chem. Sci. 5, 2091 (2014)], is tested for one- and two-dimensional ab initio based potentials describing hydrogen dissociation in the {sup 1}B{sub 1} excited electronic state of pyrrole. The primary observables are the tunneling rates in a progression of bending vibrational states lying below the dissociation barrier and their isotope dependences. Several initial ensembles of classical trajectories have been considered, corresponding to the quasiclassical and the quantum mechanical samplings of the initial conditions. It is found that the sampling based on the fixed energy Wigner density gives the best agreement with the quantum mechanical dissociation rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Selective Solid–Liquid and Liquid–Liquid Extraction of Lithium Chloride Using Strapped Calix[4]pyrroles

Abstract LiCl is a classic “hard” ion salt that is present in lithium‐rich brines and a key component in end‐of‐life materials (that is, used lithium‐ion batteries). Its isolation and purification from like salts is a recognized challenge with potential strategic and economic implications. Herein, we describe two ditopic calix[4]pyrrole‐based ion‐pair receptors ( 2 and 3 ), that are capable of selectively capturing LiCl. Under solid–liquid extraction conditions, using 2 as the extractant, LiCl could be separated from a NaCl/KCl salt mixture containing as little as 1 % LiCl with circa 100 % selectivity, while receptor 3 achieved similar separations when the LiCl level was as low as 200 ppm. Under liquid–liquid extraction conditions using nitrobenzene as the non‐aqueous phase, the extraction preference displayed by 2 is KCl>NaCl>LiCl. In contrast, 3 exhibits high selectivity towards LiCl over NaCl and KCl, with no appreciable extraction being observed for the latter two salts.

He, Qing↗
DOE OSTI2017

Design and synthesis of thieno[3,4‐ c ]pyrrole‐4,6‐dione based conjugated copolymers for organic solar cells

Abstract A new series of conjugated copolymers ( PBDT‐TPD , PBDT ‐Th‐ TPD , PBDT‐TT‐TPD ) containing donor–acceptor (D − A) structure electron‐rich benzo[1,2‐ b :4,5‐ b ′]dithiophene ( BDT ) units with branched alkyl thiophene side chains and electron‐deficient 5‐(2‐octyl)‐4 H ‐thieno[3,4‐ c ]pyrrole‐4,6(5 H )‐dione (TPD) units was designed and synthesized. To tune the optical and electrochemical properties of the copolymers, the conjugation length of the copolymers was extended by introducing π‐conjugated spacers such as thiophene and thieno[3,2‐ b ]thiophene units. It was observed that PBDT‐TPD showed broader absorption spectra in the longer wavelength region and the absorption maximum was red‐shifted compared to that of PBDT‐Th‐TPD, PBDT‐TT‐TPD. Stokes shifts were calculated to be 52 nm for PBDT‐TPD, 153 nm for PBDT‐Th‐TPD and 146 nm for PBDT‐TT‐TPD. Further, PBDT‐TPD exhibited a deeper highest occupied molecular orbital energy level of −5.53 eV as calculated by cyclic voltammetry. Bulk heterojunction solar cells fabricated using PBDT‐TPD as donor material exhibited a power conversion efficiency of 1.92%. © 2017 Society of Chemical Industry

Kotturappa, Chandrashekara G.↗
DOE OSTI2019

Soft Materials Constructed Using Calix[4]pyrrole- and “Texas-Sized” Box-Based Anion Receptors

We present that soft materials have received considerable attention from supramolecular chemists and material scientists alike. This interest reflects the advantages provided by their soft, flexible nature and the convenience of the molecular self-assembly that underlies their preparation. Common soft supramolecular materials include polymeric gels, supramolecular polymers, nanoaggregates, and membranes. Polymeric gels are solidlike networks of cross-linked polymer chains. Supramolecular polymers contain repeat units connected through reversible non-covalent bonds. Nanoaggregates are formed as a result of hydrophobic interactions involving amphiphilic building blocks. Because of the presence of non-covalent interactions, supramolecular soft materials typically display stimuli-responsive or adaptive features. Various macrocyclic hosts, such as cyclodextrins, crown ethers, calixarenes, cucurbiturils, and pillararenes, and many classic non-covalent interactions have been harnessed to construct supramolecular soft materials. Only recently has anion binding been used as the underlying recognition motif. Anions are ubiquitous in the natural world. Their importance has inspired efforts to achieve good anion binding and to exploit anion recognition in a number of fields, including extraction, transport, sensing, and catalysis. Most of this effort has involved the use of stand-alone anion receptors. On the other hand, soft materials with anion recognition features could lead to new macromolecular systems of interest in the context of many application areas. In this Account, we summarize the latest efforts from our laboratory to prepare supramolecular soft materials, including polymeric gels, supramolecular polymers, and nanoaggregates, with bona fide anion recognition features. Two anion receptor systems, namely, calix[4]pyrroles (C4Ps) and a tetraimidazolium macrocycle known as the “Texas-sized” molecular box (TxSB), have been used for this purpose. To date, TxSB-based hydrogels have been utilized to capture anions from water and for coded information applications; C4P-based organic polymeric gels have been used to extract dianions from aqueous source phases and for the on-site detection of chloride anions. Polymers containing C4P and TxSB anion recognition subunits typically display responsive features and can be modified through application of appropriately chosen external stimuli. For instance, nanoaggregates may be formed as a result of the hydrophobic interactions of C4P- and TxSB-based amphiphiles. The resulting aggregates were found to mimic the structural evolution of organelles and could be used as effective anion and ion pair extractants. This Account summarizes progress to date while underscoring potential opportunities associated with combining anion recognition and soft materials chemistry. Finally, the hope is to stimulate further advances in broad areas, including polymer science, supramolecular chemistry, biology, materials research, and information storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗