Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PYROCHLORE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

High-pressure behavior of A 2 B 2 O 7 pyrochlore (A=Eu, Dy; B=Ti, Zr)

In situ high-pressure X-ray diffraction and Raman spectroscopy were used to determine the influence of composition on the high-pressure behavior of A 2 B 2 O 7 pyrochlore (A=Eu, Dy; B=Ti, Zr) up to ~50GPa. Based on X-ray diffraction results, all compositions transformed to the high-pressure cotunnite structure. The B-site cation species had a larger effect on the transition pressure than the A-site cation species, with the onset of the phase transformation occurring at ~41 GPa for B=Ti and ~16 GPa B=Zr. However, the A-site cation affected the kinetics of the phase transformation, with the transformation for compositions with the smaller ionic radii, i.e., A=Dy, proceeding faster than those with a larger ionic radii, i.e., A=Eu. These results were consistent with previous work in which the radius-ratio of the A- and B-site cations determined the energetics of disordering, and compositions with more similarly sized A- and B-site cations had a lower defect formation energy. Raman spectra revealed differences in the degree of short-range order of the different compositions. Due to the large phase fraction of cotunnite at high pressure for B=Zr compositions, Raman modes for cotunnite could be observed, with more modes recorded for A=Eu than A=Dy. These additional modes are attributed to increased short-to-medium range ordering in the initially pyrochlore structured Eu 2 Zr 2 O 7 as compared with the initially defect-fluorite structured Dy 2 Zr 2 O 7 .

36 MATERIALS SCIENCE↗

High-Performance Pyrochlore-Type Yttrium Ruthenate Electrocatalyst for Oxygen Evolution Reaction in Acidic Media

Development of acid-stable electrocatalysts with low overpotential for oxygen evolution reaction (OER) is a major challenge for the production of hydrogen directly from water. We report in this paper a pyrochlore yttrium ruthenate (Y2Ru2O7-δ) electrocatalyst that has significantly enhanced performance towards OER in acid media over the best-known catalysts, with an onset overpotential of 190 mV and high stability in 0.1-M perchloric acid solution. X-ray absorption near-edge structure (XANES) indicates Y2Ru2O7-δ electrocatalyst had a low valence state that favors the high OER activity. Density functional theory (DFT) calculation shows this pyrochlore has lower band center energy for the overlap between Ru 4d and O 2p orbitals and therefore more stable Ru-O bond than RuO2, highlighting the effect of yttrium on the enhancement in stability. The Y2Ru2O7-δ pyrochlore is also free of expensive iridium metal, thus a cost-effective candidate for practical applications.

Kim, Jaemin↗

Zirconate pyrochlores under high pressure

Ab initio total-energy calculations and x-ray diffraction measurements have been combined to study the phase stability of zirconate pyrochlores (A2Zr2O7; A=La, Nd and Sm) under pressures up to 50 GPa. Phase transformations to the defect-cotunnite structure are theoretically predicted at pressures of 22, 20 and 18 GPa, in excellent agreement with the experimentally determined values of 21, 22 and 18 GPa for La2Zr2O7, Nd2Zr2O7 and Sm2Zr2O7, respectively. Analysis of the elastic properties indicates that elastic anisotropy may be one of the driving forces for the pressure-induced cubic-to-noncubic phase transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal growth and characterization of the pyrochlore Er 2 Ti 2 O 7

Pyrochlore erbium titanate samples in the form of powders (with nominal compositions of Er 2 Ti 2+ x O 7 , -0.08 ≤ x ≤ 0.08) and bulk single crystals were prepared to elucidate the effect of synthesis and growth conditions on their composition, structure, and transition temperature. All the samples were characterized using X-ray diffraction and specific heat measurements. Larger lattice parameters were measured for Ti-deficient stuffed powders, Er 2 (Ti 2- x Er x )O 7- δ , while Ti-rich anti-stuffed powders, (Er 2- x Ti x )Ti 2 O 7+ δ , showed a decrease in the lattice parameter. The lattice parameter for the stoichiometrically synthesized powder, Er 2 Ti 2 O 7 , was measured to be a = 10.07522(9) Å. Single crystals grown by the conventional floating zone (FZ) technique were Ti deficient (stuffed) and darker in color due to oxygen vacancies. Using the traveling solvent floating zone (TSFZ) method, a high structural quality, transparent and stoichiometric Er 2 Ti 2 O 7 single crystal was grown at a lower temperature using the TiO 2 solvent. The heat capacity measurements of the TSFZ grown Er 2 Ti 2 O 7 crystal and stoichiometric powder exhibited a very close magnetic transition temperature T c of ~1.23 K that was suppressed in off-stoichiometric samples, demonstrating correlations between the stoichiometry and ground state magnetism in Er 2 Ti 2 O 7 .

optics, thermal conductivity, defects, charge tran↗

Energetics and Concentration of Defects in Gd2Ti2O7 and Gd2ZrO7 Pyrochlore at High Pressure

Using first-principles calculations and complementary experiments, the defect formation energies and defect concentrations were calculated as a function of pressure. The results show that at high pressure, the defect formation energies decrease with pressure for both systems. In Gd{sub 2}Ti{sub 2}O{sub 7}, the dominant defect type is cation anti-site defect, the local structure around a defect is highly distorted, and the energetically favorable defect-defect interactions at shorter distance suggest the possibility of defect clustering. In Gd{sub 2}Zr{sub 2}O{sub 7}, anion Frenkel-pair defects are favored at all pressures and the dominant defect type involving a cation is a coupled defect of a cation anti-site and an anion Frenkel-pair defect. There are only minor distortions around the defects, and the defect-defect interactions are weak, which suggests almost-ideal non-interacting defect formation. Comparison of experimentally observed defect concentrations and those based on the calculated defect formation energies suggests that the defects formed at high pressure are better estimated with a concentrated limit approximation, while those formed at ambient pressure can be evaluated at a dilute limit approximation.

36 MATERIALS SCIENCE↗