Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLZT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

PLZT capacitor on glass substrate

A lead-lanthanum-zirconium-titanate (PLZT) capacitor on a substrate formed of glass. The first metallization layer is deposited on a top side of the substrate to form a first electrode. The dielectric layer of PLZT is deposited over the first metallization layer. The second metallization layer deposited over the dielectric layer to form a second electrode. The glass substrate is advantageous as glass is compatible with an annealing process used to form the capacitor.

25 ENERGY STORAGE↗

Thermophysical properties of PLZT ferroelectric ceramics with a nanopolar structure

The heat capacity, thermal expansion coefficient, and deformation of the PLZT-9/65/35 compound are studied in the temperature range 150-800 K. Diffuse anomalies are detected in the temperature dependences of the heat capacity and thermal expansion coefficient over wide temperature ranges of 250-650 and 330-550 K, respectively. The anomalous behavior of the heat capacity in the temperature range 250-650 K is shown to be caused by the appearance of two-level states (Schottky anomaly). The results obtained are discussed along with the data of structural and dielectric studies.

36 MATERIALS SCIENCE↗

PLZT block data composers operated in differential phase mode

The use of a PLTZ block data composer as a matrix type phase modulator to record and process digital data by the differential phase mode in a holographic recording/processing system was investigated. The system has readout contrast ratios of between 10 and 15 to 1. The differential phase mode has the advantage that strain bias is not required and thickness and strain variations in the PLZT are cancelled out.

Drake, M. D.↗

PLZT matrix-type block data composers

Description of the characteristics of PLZT-matrix type block data composers operated in the strain-biased, scattering, differential phase, and edge-effect modes. The operation peculiarities of each of these four modes are discussed, and their respective merits are compared.

Drake, M. D.↗

Study of x CNFO + (1-x) PLZT magnetoelectric composites

In the present paper, we are reporting the studies on structural, dielectric, ferroelectric and magnetic properties of Lanthanum (La) substituted Lead Zirconate Titanate (PZT) and Cobalt Nickel ferrite (CNFO) composites with compositional formula x(Co{sub 0.80}Ni{sub 0.20}Fe{sub 2}O{sub 4})+(1−x)(Pb{sub 1.01625}La{sub 0.0025}Zr{sub 0.55}Ti{sub 0.45}O{sub 3}) (x = 0.00,0.10). The materials were synthesized by solid state reaction route. XRD analysis confirms the presence of both ferrite and ferroelectric phases. Dielectric properties were studied as a function of frequency and temperature. Ferroelectric P-E and Magnetic M-H hysteresis loops were measured at room temperature.

36 MATERIALS SCIENCE↗

Structural Features of PLZT Films

Lead zirconate titanate (PZT) films doped with lanthanum, Pb({sub 1–х)}La{sub х}(Zr{sub 0.48}Ti{sub 0.52}) (х = 0, 0.02, 0.05, 0.08, or 0.01), have been investigated by electron microscopy and X-ray diffraction. Films were formed on Si–SiO{sub 2}–TiO{sub 2}–Pt substrates by chemical vapor deposition from a solution and annealed at temperatures T = 650 and 750°C. The main structural features of the films, differing them from undoped PZT films fabricated by the same method, have been established. It is found that doping with lanthanum delays the pyrochlore–perovskite transformation in the film bulk, i.e., in the regions distant from the film–substrate interface. The fraction of metastable pyrochlore phase increases with an increase in the La molar content in the films. The main reason for the delay is the deficit of lead in the intergranular perovskite space, especially in the upper part of the film. Annealing at T = 750°C reduces the content of pyrochlore phase but does not completely remove it, which was never observed for undoped PZT films. Doping with lanthanum leads to a change in the lattice period c and a tetragonal distortion of the perovskite lattice (c/a ratio). Hence, the [100] texture of the films obtained, in contrast to the typical [111] texture of PZT films, is due to the increase in the lattice mismatch between the film and platinum layer when lead atoms are replaced with lanthanum. Lattice distortions of “transrotational” character, whose value exceeds 160 deg/μm, are found to arise in growing crystals.

36 MATERIALS SCIENCE↗

Decoupling Mesoscale Functional Response in PLZT across the Ferroelectric–Relaxor Phase Transition with Contact Kelvin Probe Force Microscopy and Machine Learning

Relaxor ferroelectrics exhibit a range of interesting material behavior, including high electromechanical response, polarization rotations, as well as temperature and electric field-driven phase transitions. The origin of this unusual functional behavior remains elusive due to limited knowledge on polarization dynamics at the nanoscale. Piezoresponse force microscopy and associated switching spectroscopy provide access to local electromechanical properties on the micro- and nanoscale, which can help to address some of these gaps in our knowledge. However, these techniques are inherently prone to artefacts caused by signal contributions emanating from electrostatic interactions between tip and sample. Understanding functional behavior of complex, disordered systems like relaxor materials with unknown electromechanical properties therefore requires a technique that allows distinguishing between electromechanical and electrostatic response. Here, contact Kelvin probe force microscopy (cKPFM) is used to gain insight into the evolution of local electromechanical and capacitive properties of a representative relaxor material lead lanthanum zirconate across the phase transition from a ferroelectric to relaxor state. The obtained multidimensional data set was processed using an unsupervised machine learning algorithm to detect variations in functional response across the probed area and temperature range. Further analysis showed the formation of two separate cKPFM response bands below 50 °C, providing evidence for polarization switching. At higher temperatures only one band is observed, indicating an electrostatic origin of the measured response. In addition, the junction potential difference, which was extracted from the cKPFM data, becomes independent of the temperature in the relaxor state. As a result, the combination of this multidimensional voltage spectroscopy technique and machine learning allows to identify the origin of the measured functional response and to decouple ferroelectric from electrostatic phenomena necessary to understand the functional behavior of complex, disordered systems like relaxor materials.

36 MATERIALS SCIENCE↗

Dielectric and ferroelectric analysis of nanoparticle/nanocrystalline barium titanate and PLZT.

Attractive for numerous technological applications, ferroelectronic oxides constitute an important class of multifunctional compounds. Intense experimental efforts have been made recently in synthesizing, processing and understanding ferroelectric nanostructures. This work will present the systematic characterization and optimization of barium titanate and lead lanthanum zirconate titanate nanoparticle based ceramics. The nanoparticles have been synthesized using several solution and pH-based synthesis processing routes and employed to fabricate polycrystalline ceramic and nanocomposite based components. The dielectric and ferroelectric properties of these various components have been gauged by impedance analysis and electromechanical response and will be discussed.

36 MATERIALS SCIENCE↗

Aqueous synthesis and electrical properties of nano-crystalline PLZT capacitors.

Devices with nano-crystalline microstructures have been shown to possess improved electrical properties. Further advantages include lower processing temperatures; however, device fabrication from nano-particles poses several challenges. This presentation describes a novel aqueous synthesis technique to produce large batch sizes with minimal waste. The precipitate is readily converted at less than 550 C to a phase pure, nano-crystalline Pb{sub 0.88} La{sub 0.12}(Zr{sub 0.70} Ti{sub 0.30}){sub 0.97} O{sub 3} powder. Complications and solutions to sample fabrication from nano-powders are discussed, including the use of glass sintering aids to improve density and further lower sintering temperatures. Finally, electrical properties are presented to demonstrate the potential benefits of nano-crystalline capacitors.

36 MATERIALS SCIENCE↗