Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLUTONIUM 240”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Parity splitting and E1/E2 branching in the alternating parity band of {sup 240}Pu from two-center octupole wave functions using supersymmetric quantum mechanics

An interpretation is suggested of the recently published experimental data on the alternating parity bands in {sup 240}Pu. The interpretation is based on the assumption that the main role in the description of the properties of the alternating parity bands plays the octupole mode which preserves the axial symmetry. The mathematical technique of the supersymmetric quantum mechanics is used for the realization of the model with the two-center octupole wave functions. A good description of the parity splitting and of the ratio of the dipole and quadrupole transitional moments is obtained for the first two bands.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Relativistic energy density functionals: Low-energy collective states of {sup 240}Pu and {sup 166}Er

The empirical relativistic density-dependent, point-coupling energy density functional, adjusted exclusively to experimental binding energies of a large set of deformed nuclei with Aapprox =150-180 and Aapprox =230-250, is tested with spectroscopic data for {sup 166}Er and {sup 240}Pu. Starting from constrained self-consistent triaxial relativistic Hartree-Bogoliubov calculations of binding energy maps as functions of the quadrupole deformation in the beta-gamma plane, excitation spectra and E2 transition probabilities are calculated as solutions of the corresponding microscopic collective Hamiltonian in five dimensions for quadrupole vibrational and rotational degrees of freedom and compared with available data on low-energy collective states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Possible double-octupole phonon band in {sup 238}U

The level scheme of {sup 238}U has been extended using the so-called unsafe Coulomb excitation technique. One positive-parity band was uncovered for the first time, and its most important features can be related to a double-octupole phonon excitation. This band decays to the known K=0 octupole band via E1 transitions, with strengths much larger than those to the ground-state band. It also decays to the K=1 and 2 octupole bands. Comparisons among the proposed zero-, one-, and two-phonon bands in {sup 238}U and those in {sup 240}Pu shed more light on the recently proposed concept of rotationally aligned octupole phonon condensation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Second Look at Neutron Resonance Transmission Analysis as a Spent Fuel NDA Technique

Many different nondestructive analysis techniques are currently being investigated as a part of the United States Department of Energy's Next Generation Safeguards Initiative (NGSI) seeking methods to quantify plutonium in spent fuel. Neutron Resonance Transmission Analysis (NRTA) is one of these techniques. Having first been explored in the mid-1970s for the analysis of individual spent-fuel pins a second look, using advanced simulation and modeling methods, is now underway to investigate the suitability of the NRTA technique for assaying complete spent nuclear fuel assemblies. The technique is similar to neutron time-of-flight methods used for cross-section determinations but operates over only the narrow 0.1-20 eV range where strong, distinguishable resonances exist for both the plutonium (239, 240, 241,242Pu) and uranium (235,236,238U) isotopes of interest in spent fuel. Additionally, in this energy range resonances exists for six important fission products (99Tc, 103Rh, 131Xe, 133Cs, 145Nd, and 152Sm) which provide additional information to support spent fuel plutonium assay determinations. Initial modeling shows excellent agreement with previously published experimental data for measurements of individual spent-fuel pins where plutonium assays were demonstrated to have a precision of 2-4%. Within the simulation and modeling analyses of this project scoping studies have explored fourteen different aspects of the technique including the neutron source, drift tube configurations, and gross neutron transmission as well as the impacts of fuel burn up, cooling time, and fission-product interferences. These results show that NRTA may be a very capable experimental technique for spent-fuel assay measurements. The results suggest sufficient transmission strength and signal differentiability is possible for assays through up to 8 pins. For an 8-pin assay (looking at an assembly diagonally), 64% of the pins in a typical 17 ? 17 array of a pressurized water reactor fuel assembly can be part of a complete transmission assay measurement with high precision. Analysis of rows with up to 12 pins may also be feasible but with diminished precision. Preliminary data analysis of an NRTA simulation has demonstrated the simplicity of the technique.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Assessing the Feasibility of Using Neutron Resonance Transmission Analysis (NRTA) for Assaying Plutonium in Spent Fuel Assemblies

Neutron resonance transmission analysis (NRTA) is an active-interrogation nondestructive assay (NDA) technique capable of assaying spent nuclear fuel to determine plutonium content. Prior experimental work has definitively shown the technique capable of assaying plutonium isotope composition in spent-fuel pins to a precision of approximately 3%, with a spatial resolution of a few millimeters. As a Grand Challenge to investigate NDA options for assaying spent fuel assemblies (SFAs) in the commercial fuel cycle, Idaho National Laboratory has explored the feasibility of using NRTA to assay plutonium in a whole SFA. The goal is to achieve a Pu assay precision of 1%. The NRTA technique uses low-energy neutrons from 0.1-40 eV, at the bottom end of the actinide-resonance range, in a time-of-flight arrangement. Isotopic composition is determined by relating absorption of the incident neutrons to the macroscopic cross-section of the actinides of interest in the material, and then using this information to determine the areal density of the isotopes in the SFA. The neutrons used for NRTA are produced using a pulsed, accelerator-based neutron source. Distinguishable resonances exist for both the plutonium (239,240,241,242Pu) and uranium (235,236,238U) isotopes of interest in spent fuel. Additionally, in this energy range resonances exists for six important fission products (99Tc, 103Rh, 131Xe, 133Cs, 145Nd, and 152Sm) which provide additional information to support spent fuel plutonium assay determinations. Based on extensive modeling of the problem using Monte Carlo-based simulation codes, our preliminary results suggest that by rotating an SFA to acquire four symmetric views, sufficient neutron transmission can be achieved to assay a SFA. In this approach multiple scan information for the same pins may also be unfolded to potentially allow the determination of plutonium for sub-regions of the assembly. For a 17 ? 17 pressurized water reactor SFA, a simplistic preliminary analysis indicates the mass of 239Pu may be determined with a precision on the order of 5%, without the need for operator-supplied fuel information or operational histories. This paper will present our work to date on this topic, indicate our preliminary findings for a conceptual assay approach, discuss resilience against spoofing, and outline our future plans for evaluating the NRTA technique for SFA plutonium determination.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Deformation properties of the Barcelona-Catania-Paris (BCP) energy density functional

We explore the deformation properties of the newly postulated Barcelona-Catania-Paris (BCP) energy density functional (EDF). The results obtained for three isotope chains of Mg, Dy, and Ra are compared to the available experimental data as well as to the results of the Gogny-D1S force. Results for the fission barrier of {sup 240}Pu are also discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Alternating-parity collective states of yrast and nonyrast bands in lanthanide and actinide nuclei

Excited collective states of even-even nuclei featuring quadrupole and octupole deformations are studied within a nonadiabatic collective model with a Gaussian potential energy. Rotational states of the yrast band and vibrational-rotational states of nonyrast bands are considered in detail. The energies of alternating-parity excited states of the yrast band in the {sup 164}Er, {sup 220}Ra, and {sup 224}Th nuclei; the yrast and first nonyrast bands in the {sup 154}Sm and {sup 160}Gd nuclei; and the yrast, first nonyrast, and second nonyrast bands in the {sup 224}Ra and {sup 240}Pu nuclei are described well on the basis of the proposed model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Simplified treatment of exact resonance elastic scattering model in deterministic slowing down equation

Simplified treatment of resonance elastic scattering model considering thermal motion of heavy nuclides and the energy dependence of the resonance cross section was implemented into NJOY [1]. In order to solve deterministic slowing down equation considering the effect of up-scattering without iterative calculations, scattering kernel for heavy nuclides is pre-calculated by the formula derived by Ouisloumen and Sanchez [2], and neutron spectrum in up-scattering term is expressed by NR approximation. To check the verification of the simplified treatment, the treatment is applied to U-238 for the energy range from 4 eV to 200 eV. Calculated multi-group capture cross section of U-238 is greater than that of conventional method and the increase of the capture cross sections is remarkable as the temperature becomes high. Therefore Doppler coefficient calculated in UO{sub 2} fuel pin is calculated more negative value than that on conventional method. The impact on Doppler coefficient is equivalent to the results of exact treatment of resonance elastic scattering reported in previous studies [2-7]. The agreement supports the validation of the simplified treatment and therefore this treatment is applied for other heavy nuclide to evaluate the Doppler coefficient in MOX fuel. The result shows that the impact of considering thermal agitation in resonance scattering in Doppler coefficient comes mainly from U-238 and that of other heavy nuclides such as Pu-239, 240 etc. is not comparable in MOX fuel. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron capture by fissile and fertile actinide targets

For fissile actinide targets {sup 233}U, {sup 235}U and {sup 239}Pu the capture cross sections are strongly influenced by the target spin, fission transition states spectroscopy and fission/{gamma}-emission competition of the compound nuclides. The capture cross sections were obtained via a consistent description of fission and elastic/inelastic scattering, (n,{gamma}f) reaction being included.For neutron capture reactions on even-even U, Pu and Cm nuclei the methods, proven in case of {sup 232}Th(n,{gamma}) and {sup 238}U(n,{gamma}) data analysis are used. Calculated {sup 240}Pu(n,{gamma}) and {sup 244}Cm(n,{gamma}) reaction cross sections shapes are much similar to that, observed for the {sup 238}U(n,{gamma}) and {sup 232}Th(n,{gamma}) reactions. Differences are due to fission and neutron emission competition, which depends on the (Z,N)-composition of the compound nucleus.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Superconducting calorimetric alpha particle sensors for nuclear nonproliferation applications

Identification of trace nuclear materials is usually accomplished by alpha spectrometry. Current detectors cannot distinguish critical elements and isotopes. We have developed a detector called a microcalorimeter, which achieves a resolution of 1.06 keV for 5.3 MeV alphas, the highest resolving power of any energy dispersive measurement. With this exquisite resolution, we can unambiguously identify the {sup 240}Pu/{sup 239}Pu ratio in Pu, a critical measurement for ascertaining the intended use of nuclear material. Furthermore, we have made a direct measurement of the {sup 209}Po ground state decay.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Burnup estimation of fuel sourcing radioactive material based on monitored Cs and Pu isotopic activity ratios in Fukushima N. P. S. accident

After the severe core damage of Fukushima Dai-Ichi Nuclear Power Station, radioactive material leaked from the reactor buildings. As part of monitoring of radioactivity in the site, measurements of radioactivity in soils at three fixed points have been performed for {sup 134}Cs and {sup 137}Cs with gamma-ray spectrometry and for Pu, Pu, and {sup 240}Pu with {alpha}-ray spectrometry. Correlations of radioactivity ratios of {sup 134}Cs to {sup 137}Cs, and {sup 238}Pu to the sum of {sup 239}Pu and {sup 240}Pu with fuel burnup were studied by using theoretical burnup calculations and measurements on isotopic inventories, and compared with the Cs and Pu radioactivity rations in the soils. The comparison indicated that the burnup of the fuel sourcing the radioactivity was from 18 to 38 GWd/t, which corresponded to that of the fuel in the highest power and, therefore, the highest decay heat in operating high-burnup fueled BWR cores. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Multiplicity Counting

This set of slides begins by giving background and a review of neutron counting; three attributes of a verification item are discussed: 240 Pu eff mass; α, the ratio of (α,n) neutrons to spontaneous fission neutrons; and leakage multiplication. It then takes up neutron detector systems – theory & concepts (coincidence counting, moderation, die-away time); detector systems – some important details (deadtime, corrections); introduction to multiplicity counting; multiplicity electronics and example distributions; singles, doubles, and triples from measured multiplicity distributions; and the point model: multiplicity mathematics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Enhancements to a dissolver burn up credit safety case to reduce further GD use in the thermal oxide reprocessing plant (THORP), Sellafield - 14229

THORP reprocesses fuel from Britain's Advanced Gas-cooled Reactors (AGRs) and fuel from Light Water Reactors (LWRs). The THORP dissolvers use nitric acid poisoned with Gadolinium (Gd) to ensure criticality safety. The dissolver criticality safety case uses a burnup credit approach to determine a minimum required Gd concentration. The burn up credit approach followed originates from a time when fuel receipts for THORP were ongoing and hence models a deliberately conservative and artificial fuel type to cover all potential fuel receipts. External fuel receipts have now ceased and detailed information on post irradiation U and Pu isotopics is available for all fuel scheduled for reprocessing. Work has therefore been undertaken to determine whether the burn up credit safety case could be revised to be more representative of the fuel actually remaining for reprocessing and hence to reduce further the required Gd concentration for the dissolvers. This would ultimately reduce the quantity of high active liquid waste requiring treatment and storage. The great majority of fuel remaining for reprocessing in THORP is AGR fuel, for which the typical burnup is known to be much higher than was previously assumed in the safety case. Pu and U isotopics for irradiated AGR fuel were examined with the fuel inventory code FISPIN. Modelling with the code MONK then showed that the Gd requirement for irradiated AGR fuel of a given burnup was much lower than in the previous safety case due to the change in Pu:U ratio and Pu{sup 240} in Pu for AGR fuel compared with the previous conservative assumptions. The burnup of all remaining LWR fuel was found to be high and hence lower dissolver Gd concentrations could also be tolerated for reprocessing this fuel. The work has concluded that the THORP dissolver Gd concentration can be halved for all remaining LWR and AGR fuel campaigns with a consequent cost saving of ∼ UK pound 4 m in Gd and high active waste processing time. Implementation of this improvement is currently ongoing on the plant. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Possible experimental evidence for the presence of double octupole states in {sup 240}Pu

Excited states in the {sup 240}Pu nucleus have been studied by means of the (p,t) reaction using the Q3D spectrometer and the focal plane detector from Munich. The comparison between experimental angular distributions and the DWBA calculations allowed the extraction of relative two-neutron transfer strengths. These observables may reveal important information about the structure of different states. The experimental two neutron strength for the 0{sup +}{sub 2} and 0{sup +}{sub 3} states is found in good agreement with the predictions of the IBA model, confirming the double octupole nature for the 0{sup +}{sub 2} state proposed in the previous studies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Structure of {sup 240}Pu: Evidence for Octupole Phonon Condensation?

The expanded level structure of {sup 240}Pu available from the present study highlights the role of strong octupole correlations in this nucleus. In addition to a delayed alignment in the yrast band, the observations include the presence of both I{sup +}{yields}(I-1){sup -} and I{sup -}{yields}(I-1){sup +}E1 transitions linking states of the yrast and negative-parity bands at high spin and the presence of an additional even-spin, positive-parity band deexciting exclusively to the negative-parity sequence. The observations appear to be consistent with expectations based on the recently proposed concept of octupole phonon condensation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NPP Radwaste Activity Determination by the Correlation Method

A radwaste radiation-monitoring methodology based on correlations established between the activity of radionuclides and making it possible to determine the activity of hard-to-detect radionuclides ({sup 3}H, {sup 14}C, {sup 63}Ni, {sup 90}Sr, {sup 238}U, {sup 238,} {sup 239,} {sup 240}Pu, and others) in waste lots was investigated. An algorithm for compiling a list of radionuclides monitored during certification of the wastes, which is based on criteria for the wastes being radioactive and their classification, and requirements for the intermediate storage time and the half-life of radionuclides, and an algorithm for establishing the correlations between the specific activity of the reference and hard-to-detect radionuclides were developed in order to implement the methodology. The application of the criterion and algorithm to the wastes at the Novovoronezh NPP made it possible to compile a list of monitored radionuclides that agrees with the national operator in terms of handling radwastes and to establish the correlations between the activity of individual radionuclides and confirm the applicability of the methodology to radwaste from NPPs.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Final design for thermal epithermal experiments (TEX) with ZPPR plutonium/aluminium plates with polyethylene and tantalum - 13592

Lawrence Livermore National Laboratory has completed the final design for the first phase of the Thermal Epithermal experiments (TEX), which focused on critical configurations composed of plutonium/aluminum Zero Power Physics Reactor (ZPPR) plates moderated by polyethylene with and without a tantalum diluent. {sup 239}Pu and {sup 240}Pu were identified as being the number one and two nuclear data need by the nuclear criticality safety and nuclear data communities, with special emphasis placed on performance issues of the Pu cross sections in the intermediate energy region. Preliminary TEX design recommended tantalum as the first diluent to pursue for final design, as it represented a high priority data need, showed the highest sensitivity and largest contribution to uncertainty with the Pu ZPPR system, and a large number of high quality Ta plates from the ZPPR inventory in Idaho was readily available. The goals of the new critical experiments are 1) to create assemblies that span a wide range of fission energy spectra, from thermal (below 0.625 eV), through the intermediate (0.65 eV to 100 keV), and to fast energies (above 100 keV), and 2) to easily modify the assemblies to include high priority materials like tantalum. A total of ten critical configurations were designed as part of CED-2. Five TEX experiments (Experiments 1-5) were designed to establish baseline configurations with the Pu ZPPR plates covering the thermal, intermediate, and fast fission energy regimes. For all five experiments, the ZPPR plates will be arranged in layers of 24 plates (6 plates by 4 plates), resulting in approximately a 12 inch by 12 inch footprint. Multiple layers will be stacked together with varying thicknesses of interspersed polyethylene placed between the layers to fine tune the neutron spectrum of the assembly. The other five experiments (Experiments 6-10) will be similar to the five baseline experiments, except that a tantalum layer will be placed next to each plutonium plate layer, thus diluting the stack and allowing for tests of the neutron cross section for tantalum. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗