Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA IMPURITIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Radiative recombination and photoionization cross sections for heavy element impurities in plasmas: II. Ions of Si, Cl, Ar, Ti, Cr, Kr, and Xe

Total cross sections for radiative recombination with an electron for 36 ions of Si, Cl, Ar, Ti, Cr, Kr, and Xe as well as subshell photoionization cross sections are presented. The electron kinetic energy is {<=}50 keV. The calculations were performed using the relativistic Dirac-Fock method and the results have been included in a database of radiative recombination and photoionization cross sections for the heavy element impurity ions occurring in plasmas. The data are required for modelling fusion and astrophysical plasmas. To obtain the total radiative recombination cross section, calculations have been carried out for ground and all excited electron states up to states with the principal quantum number n = 20. The subshell photoionization cross sections for all states with n {<=} 12 and orbital momenta l {<=} 6 have been fitted by an analytical expression with five fit parameters which are tabulated.

74 ATOMIC AND MOLECULAR PHYSICS↗

Role of impurities in fusion plasmas

The role of impurity at the plasma edge of fusion devices is considered by analysing the influence on radiation losses and anomalous transport of particle and energy. The conditions critical for the development of radiative instabilities leading to the formation of detachment and MARFE and those necessary for the creation of a stable radiating edge, protecting the wall elements from intensive heat loads, are analyzed. Mechanisms responsible for anomalous transport suppression with impurity seeding are elucidated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modernized active spectroscopic diagnostics (CXRS) of the T-10 tokamak

This work presents the results of modernization of the CXRS (charge exchange recombination spectroscopy) diagnostics [1] at the T-10 tokamak. The relevance of this work is due to the importance of measurements of the ion temperature and nuclei density of the working gas and impurities for analysis of transport processes in the plasma ion component. Measurements of radial profiles of the ion temperature are extremely important for investigating the geodesic acoustic mode behavior which is conducted at the T-10 [2]. The modernized scheme of CXRS measurements, as well as the design and operational features of the spectrometer created for the new diagnostics, is described. Principles of data recording and further processing are considered in detail; attention is given to the problem of calibration of the whole complex of equipment. The performed changes in diagnostics allow the measurements to be taken simultaneously in three spectral intervals: in the region of the beam line H{sub α}, the CXRS line of carbon ion C{sup 5+}, and the CXRS line of one of the hydrogen-like ions: He{sup 1+}, Li{sup 2+}, N{sup 6+}, O{sup 7+} or Ne{sup 9+}. This makes it possible to measure the density profiles of two plasma impurities simultaneously, as well as the ion temperature from CXRS lines of different elements. The modernized diagnostics significantly broadens the possibilities of studying the physics of transport processes and quasi-coherent modes of plasma oscillations at the T-10.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radiative recombination and photoionization cross sections for impurities in plasmas: III. Ions of elements with Z{<=}20

Presented here are total cross sections of radiative recombination for 55 ions of elements from C to Ca as well as partial photoionization cross sections in the electron kinetic energy range of 1 eV to 50 keV. The data are given for bare nuclei, H-, He-, Be-, Ne-, and Ar-like recombining ions. The calculations were performed in the framework of the relativistic Dirac-Fock method. Partial photoionization cross sections for states with n{<=}10 and orbital momenta l{<=}4 were approximated by an analytical expression with five fit parameters. The results supplement our database of radiative recombination and photoionization cross sections for impurity ions occurring in fusion and astrophysical plasmas. The data are required for modelling and diagnostics of plasmas.

74 ATOMIC AND MOLECULAR PHYSICS↗

Error-Field Penetration Thresholds in Ohmically Heated ITER and SPARC Plasmas

The critical n=1, n=2, and n=3 error-field amplitudes needed to trigger error-field penetration in ITER and SPARC, steady-state, ohmically heated plasmas are calculated using a standard asymptotic matching approach. The calculation incorporates plasma impurities, trapped particles, the bootstrap current, and neoclassical poloidal flow-damping. The energy confinement time is specified by the neo-Alcator scaling law in the low-density linear ohmic confinement (LOC) regime, and by the ITER-89P L-mode scaling law in the high-density saturated ohmic confinement regime (SOC) regime. The response of the plasma in the inner region is calculated using a linearized version of the four-field model. At the normal operating electron number density, diamagnetic levels of rotation are found to be sufficient to protect ITER and SPARC ohmically heated plasmas from m=2/n=1 error-field penetration. On other hand, SPARC, and especially ITER, ohmically heated plasmas may be vulnerable to n>1 error-field penetration. ITER and SPARC ohmically heated plasmas are also slightly more susceptible to error-field penetration when the electron fluid at the rational surface rotates in the ion diamagnetic direction, rather than the electron diamagnetic direction. At electron number densities that are sufficiently low that the plasma lies in the LOC confinement regime, the error-field penetration threshold increases with increasing density. However, as soon as the electron number density becomes large enough that the plasma enters the SOC regime, the increase in the error-field penetration threshold with increasing density levels off.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Time-dependent modeling of dust outburst into tokamak divertor plasma

The first self-consistent simulation studies of the impact of transient injection of tungsten dust on ITER-like edge plasma are presented. The simulations are performed using DUSTT and UEDGE codes coupled in a fully time-dependent manner. The evolution of the divertor and upstream plasma conditions, following the injection of tungsten dust of various quantities and sizes at the outer strike point, is investigated. The estimates of the core plasma impurity fraction and the core impurity screening factor associated with the dust injection are also obtained. Here, the simulations show that the bursts of even modest amounts of tungsten dust injected into the divertor plasmas can result in large perturbations of the divertor power load and unacceptable levels of the core plasma contamination with tungsten impurities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bulk ion heating with ICRF waves in tokamaks

Heating with ICRF waves is a well-established method on present-day tokamaks and one of the heating systems foreseen for ITER. However, further work is still needed to test and optimize its performance in fusion devices with metallic high-Z plasma facing components (PFCs) in preparation of ITER and DEMO operation. This is of particular importance for the bulk ion heating capabilities of ICRF waves. Efficient bulk ion heating with the standard ITER ICRF scheme, i.e. the second harmonic heating of tritium with or without {sup 3}He minority, was demonstrated in experiments carried out in deuterium-tritium plasmas on JET and TFTR and is confirmed by ICRF modelling. This paper focuses on recent experiments with {sup 3}He minority heating for bulk ion heating on the ASDEX Upgrade (AUG) tokamak with ITER-relevant all-tungsten PFCs. An increase of 80% in the central ion temperature T{sub i} from 3 to 5.5 keV was achieved when 3 MW of ICRF power tuned to the central {sup 3}He ion cyclotron resonance was added to 4.5 MW of deuterium NBI. The radial gradient of the T{sub i} profile reached locally values up to about 50 keV/m and the normalized logarithmic ion temperature gradients R/LT{sub i} of about 20, which are unusually large for AUG plasmas. The large changes in the T{sub i} profiles were accompanied by significant changes in measured plasma toroidal rotation, plasma impurity profiles and MHD activity, which indicate concomitant changes in plasma properties with the application of ICRF waves. When the {sup 3}He concentration was increased above the optimum range for bulk ion heating, a weaker peaking of the ion temperature profile was observed, in line with theoretical expectations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Full-f XGC1 gyrokinetic study of improved ion energy confinement from impurity stabilization of ITG turbulence

Flux-driven full-f gyrokinetic simulations are performed to study carbon impurity effects on the ion temperature gradient (ITG) turbulence and ion thermal transport in a toroidal geometry. Employing the full-f gyrokinetic code XGC1, both main ions and impurities are evolved self-consistently including turbulence and neoclassical physics. It is found that the carbon impurity profile self-organizes to form an inwardly peaked density profile, which weakens the ITG instabilities and reduces the overall fluctuations and ion thermal transport. A stronger reduction appears in the low frequency components of the fluctuations. The global structure of E × B flow also changes, resulting in the reduction of global avalanche like transport events in the impure plasma. Here, the detailed properties of impurity transport are also studied, and it is revealed that both the inward neoclassical pinch and the outward turbulent transport are equally important in the formation of the steady state impurity profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modification of ion-temperature-gradient turbulence by impurities in stellarator plasmas

Recent nonlinear gyrokinetic simulations have shown that impurities can strongly modify the turbulent heat flux in stellarator plasmas. Here, the ion-temperature-gradient (ITG) dispersion relation in a plasma containing impurities is analytically solved in certain limits and an expression for the modification of the ITG growth rate by impurities is derived. The analytical expression is the sum of three terms corresponding to three different physical causes (impurity density gradient, impurity temperature gradient and dilution) of the change in the growth rate. The scalings predicted analytically for the modification of the growth rate are shown to be reproduced by linear gyrokinetic simulations. The conditions for reduction or increase of the ITG growth by impurities are also correctly predicted by the analytical solution to the dispersion relation. Finally, a remarkable correlation is found between the analytical expression for the modification of the growth rate and the modification of the turbulent heat flux obtained from nonlinear gyrokinetic simulations.

Calvo, Iván [Research Centre for Energy, Environme↗

Interpretative transport modeling of the WEST boundary plasma: main plasma and light impurities

Understanding impurity transport in tokamak plasmas is crucial to control radiative losses and material migration in future magnetic fusion reactors. In this work we deploy the SolEdge2D-EIRENE code to model the boundary plasma in a WEST discharge, satisfactorily reproducing measurements of both upstream and divertor plasma conditions. Additionally, the spatial distribution of oxygen, studied here as a representative light impurity, is compared to vacuum ultraviolet spectroscopy measurements acquired with an oscillating line of sight. The simulation captures a key feature of the experiment, namely a factor of sime2 higher oxygen brightness in the inner divertor region compared to the outer one. This spatial asymmetry in oxygen concentration is interpreted by analyzing the balance of friction forces and thermal gradient forces that the light impurity exchanges with the main plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Initial design concepts for solid boron injection in ITER

As part of ITER’s consideration to change its first wall material from beryllium to tungsten, the ITER Organization has proposed studying the feasibility of real-time solid boron injection (SBI) into the plasma to coat the walls and divertor to supplement glow discharge boronization (GDB). Boron deposits getter oxygen and reduce sputtering of tungsten from plasma facing components (PFCs). Particularly in areas with significant plasma wall interactions, boron coatings are expected to be short-lived under high performance plasma conditions. The proposed SBI system aims to maintain boron layers in these areas to avoid excessive radiation from tungsten in the plasma as a risk mitigation to ensure ITER will be able to reach and sustain Q = 10 conditions. The system will be used sparingly, as redeposition of boron can lead to significant tritium retention, which must be minimized in ITER to comply with nuclear safety concerns. SBI is proposed to limit and precisely control the amount of boron injected in real-time during plasma operation. Here, some of the design requirements and initial concepts for an SBI system in ITER are presented based on previous results carried out with SBI systems on a number of tokamaks and stellarators around the world. Previous results using SBI systems installed by PPPL have injected boron particles from 5 µm–2 mm diameter at calibrated rates of 2–200 mg/s in real-time during plasma operation on AUG, DIII-D, EAST, KSTAR, LHD, TFTR, WEST, and W7-X, leading to improved wall conditions with reduced plasma impurity concentrations and radiated power and improved plasma performance. The boron is ionized in the plasma edge and then deposited on plasma-wetted surfaces. On AUG, EAST and WEST reduced tungsten sputtering sources were observed following several discharges with SBI. Extrapolation of these SBI results are presented to estimate the amount of boron needed for wall conditioning in ITER. Real-time SBI control requirements and plasma operation scenarios for ITER are also described.

36 MATERIALS SCIENCE↗

Numerical Realization of a Shell Model for Impurity Spreading in Plasmas

In plasmas of fusion devices impurity particles are released as a consequence of wall erosion and are seeded deliberately for diverse purposes. Often they enter the plasma volume from small spots and spread away both along and perpendicular to the magnetic field. This process is described by continuity, motion and heat balance equations taking into account such physical processes as ionization by electrons, friction and heating in coulomb collisions with background ions, etc. In present paper we introduce a shell model where solutions of these equations, such as the densities of different impurity ions, are approximated by functions decaying exponentially from the source region due to the ionization into higher charged states. By integrating the original transport equations over several space regions, we get a set of ordinary differential equations describing the time evolution of the characteristic values for the impurity ion densities, fluxes, temperatures, and the dimensions along and across the magnetic field of the clouds where different states are predominantly localized. The equations obtained include time derivatives of complex non-linear combinations of the variables in question. Two numerical approaches to solve such equations are elaborated and compared by considering the spreading of lithium particles in deuterium plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The ITER core imaging x-ray spectrometer: X-ray calorimeter performance

We describe the anticipated performance of an x-ray microcalorimeter instrument on ITER. As part of the core imaging x-ray spectrometer, the instrument will augment the imaging crystal spectrometers by providing a survey of the concentration of heavy ion plasma impurities in the core and possibly ion temperature values from the emission lines of different elemental ions located at various radial positions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effect of surface derived hydrocarbon impurities on Ar plasma properties

The authors report on Langmuir probe measurements that show that hydrocarbon surfaces in contact with Ar plasma cause changes of electron energy distribution functions due to the flux of hydrogen and carbon atoms released by the surfaces. The authors compare the impact on plasma properties of hydrocarbon species gasified from an etching hydrocarbon surface with injection of gaseous hydrocarbons into Ar plasma. They find that both kinds of hydrocarbon injections decrease electron density and slightly increase electron temperatures of low pressure Ar plasma. For low percentages of impurities (∼1% impurity in Ar plasma explored here), surface-derived hydrocarbon species and gas phase injected hydrocarbon molecules cause similar changes of plasma properties for the same number of hydrocarbon molecules injected into Ar with a decrease in electron density of ∼4%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of two-channel prototype ITER vacuum ultraviolet spectrometer with back-illuminated charge-coupled device and microchannel plate detectors

A vacuum ultraviolet (VUV) spectrometer of a five-channel spectral system is designed for ITER main plasma impurity measurement. To develop and verify the system design, a two-channel prototype system is fabricated with No. 3 (14.4-31.8 nm) and No. 4 (29.0-60.0 nm) among the five channels. The optical system consists of a collimating mirror to collect the light from source to slit, two holographic diffraction gratings with toroidal geometry, and two different electronic detectors. For the test of the prototype system, a hollow cathode lamp is used as a light source. To find the appropriate detector for ITER VUV system, two kinds of detectors of the back-illuminated charge-coupled device and the microchannel plate electron multiplier are tested, and their performance has been investigated.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Advances in boronization on NSTX-Upgrade

Boronization has been effective in reducing plasma impurities and enabling access to higher density, higher confinement plasmas in many magnetic fusion devices. The National Spherical Torus eXperiment, NSTX, has recently undergone a major upgrade to NSTX-U in order to develop the physics basis for a ST-based Fusion Nuclear Science Facility (FNSF) with capability for double the toroidal field, plasma current, and NBI heating power and increased pulse duration from 1–1.5 s to 5–8 s. A new deuterated tri-methyl boron conditioning system was implemented together with a novel surface analysis diagnostic. We report on the spatial distribution of the boron deposition versus discharge pressure, gas injection and electrode location. The oxygen concentration of the plasma facing surface was measured by in-vacuo XPS and increased both with plasma exposure and with exposure to trace residual gases. Furthermore, this increase correlated with the rise of oxygen emission from the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Advances in boronization on NSTX-Upgrade

Boronization has been effective in reducing plasma impurities and enabling access to higher density, higher confinement plasmas in many magnetic fusion devices. The National Spherical Torus eXperiment, NSTX, has recently undergone a major upgrade to NSTX-U in order to develop the physics basis for a ST-based Fusion Nuclear Science Facility (FNSF) with capability for double the toroidal field, plasma current, and NBI heating power and increased pulse duration from 1–1.5 s to 5–8 s. A new deuterated tri-methyl boron conditioning system was implemented together with a novel surface analysis diagnostic. We report on the spatial distribution of the boron deposition versus discharge pressure, gas injection and electrode location. The oxygen concentration of the plasma facing surface was measured by in-vacuo XPS and increased both with plasma exposure and with exposure to trace residual gases. This increase correlated with the rise of oxygen emission from the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analytic formulae for centrifugal effects on turbulent transport of trace impurities in tokamak plasmas

A local gyrokinetic description of the centrifugal effects on impurity transport in tokamak plasmas is presented, which extends previous models with the inclusion of the gradient of the background toroidal angular velocity in the equilibrium distribution. The equations are implemented in a gyrokinetic code. An analytical model is derived and formulae are proposed which allow the calculation of centrifugal effects on impurity transport in the limit where centrifugal effects are large only for heavy impurities in trace concentration, but are negligible for the bulk plasma. The analytic formulae are shown to be in quantitative agreement with the numerical results and are proposed for complementing present transport models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗