Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA DISPERSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Synthesis and Functionalization of Coal Fly Ash-Derived Zeolites for Boron Removal From Wastewater

There are hundreds of both active and unused surface impoundments in the United States containing coal combustion residuals (CCRs) produced by coal-fired power plants which can leach toxic elements into surface and groundwater. Therefore, the development of efficient means for both the clean-up of surface impoundments and for deriving economically viable products from CCRs are urgent tasks for researchers. Herein, a microwave-assisted strategy is presented for converting a common coal combustion residual, coal fly ash (CFA), into zeolite-based sorbents for boron (B) removal from wastewater. Specifically, CFA constitutes the main source of Si and Al ions to produce zeolite type-A and the resulting sorbent subsequently undergoes simple cation exchange with Ca to enhance its B adsorption capacity. Structure and composition of the sorbents were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), inductively coupled plasma (ICP)-mass spectrometry (MS), and ICP-optical emission spectroscopy (OES). The Ca-modified zeolite sorbent derived from CFA exhibits comparable B removal capacity with similar commercial zeolites.

Muldoon, Patrick↗
DOE OSTI2025

Using quantum noise correlation analysis to measure ion temperature

Quantum noise correlation analysis was tested at the proof-of-concept level as a technique to measure ion temperature in a plasma. If eventually successful, this technique could enable a compact, inexpensive, and robust ion temperature diagnostic suitable for a burning plasma environment. Ion temperature is a key parameter determining the fusion performance of a burning plasma, as the fusion cross-section has a strong dependence on ion temperature. This ion temperature diagnostic would require only a small optical view of the plasma through a port to passively record impurity line emission. The instrumentation would be remote from the reactor behind the neutron and bio-shielding. The technique relies solely on quantum correlations of the photons emitted by a plasma impurity to measure ion temperature; there is no grating dispersion of an emission line-width or pulse-height analysis of photon energy. This measurement innovation was tested with instrumentation consisting of two single-photon detectors with high timing resolution, a time-tagging unit, and simple light collection optics. This instrumentation measures the second-order correlation between the light intensity falling on the two detectors. The next steps beyond the proof-of-concept level will be development of diagnostic designs for application of this technique to high-temperature and burning plasmas. Arrays of single-photon avalanche detectors to multiplex measurements of photon correlation will be required to reduce signal integration time to an acceptable duration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Multiscale Cryo Electron Microscopy Reveals Interfacial Degradation and Stabilization in Battery Electrodes

Electrochemical interfaces are dynamic systems, evolving based on their local environment and reactant surface structures. The electrode-electrolyte interface in Li-ion batteries can be protective, limiting parasitic reactions with the electrolyte to passivate the surface [1]. Additionally, this interphase has an impact on the Li-ion transport through that layer based on its composition, bonding environment, and thickness. These parameters are challenging to collect and may vary depending on the electrode surface site investigated relative to its spatial position in a coin cell. This study will detail a multiscale cryogenic electron microscopy approach where millimeter-scale cross-sections through the coin cell batteries were made using a cryogenic stage within a fs-laser plasma focused ion beam (laser PFIB) with complementary energy dispersive X-ray spectroscopy able to detect variations in the composition at electrode interfaces [2]. Microscale cross-sectioning and lamella sample preparation of battery electrodes was conducted at the Center for Integrated Nanotechnologies using a Ga-ion focused ion beam (FIB) with air-free and cryo-transfer [3], followed by nanoscale mapping of composition and bonding within the CEI through cryo-scanning transmission electron microscopy (cryo-STEM) electron energy loss spectroscopy [4]. This multiscale approach enabled identification of millimeter-scale features of a battery stack with visualization of degradation in electrodes such as cracks in cathode particles, gas evolution, and SEI evolution; microscale interfacial characteristics, such as heterogeneity in the SEI or barrier layer and identification of electrolyte networks to the electrode surfaces; and nanoscale measurement of the CEI thickness, mapping of transition metal bonding within the cathode particles to identify loss of active materials, and identification of beneficial electrolyte additives incorporated into the CEI structure. This multiscale approach allows for a statistical understanding of the primary mechanisms and parasitic degradation pathways that impact performance by limiting the ion transport pathways within Li+ batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Saturation and decay of an induced scattering instability driven by static field asymmetries in a non-neutral plasma

Experimental data on the saturation and decay of a previously described induced scattering instability are presented. The instability is driven by static background field asymmetries and initially produces a single growing mode (ω 1 , k 1 ). As the instability develops, several harmonically related (ω n =nω 1 , k n =nk 1 ) eigenmodes of the plasma column grow up, resulting in a spatially localized moving potential perturbation with δϕ/T ≈ 20%. After a period of rapid growth, the mode amplitudes saturate and vary slowly for roughly 10 5 ω 1 −1 . This quasi-equilibrium ends with an unusual change in the eigenmode phases, wherein δϕ changes from positive to negative. Plasma heating during this period increases the damping of all modes and rapidly quenches the instability. This instability is of particular interest because the coupling with the field asymmetry produces an enhanced level of radial transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Iridium-cobalt oxide synthesized via surfactant-assisted Adams fusion for efficient oxygen evolution in acidic and alkaline media

A series of iridium-cobalt (Ir-Co) oxide catalysts were synthesized using a modified surfactant-assisted Adams fusion method and evaluated for the oxygen evolution reaction (OER) in both acidic and alkaline media. The effect of varying the Ir/Co ratio was systematically studied and compared with commercial Ir black and pure IrO 2 samples. The actual elemental ratios were quantified using X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDS), and inductively coupled plasma-mass spectrometry (ICP-MS). Among the synthesized samples, the Ir 6 Co 4 catalyst exhibited the best performance in acidic media, achieving an iR-corrected overpotential of 292 mV. In alkaline conditions, it demonstrated comparable activity to Ir black, with an iR-corrected overpotential of 263 mV. XPS and electron energy loss spectroscopy analyses revealed that increasing Co content led to a higher fraction of metallic Ir (Ir 0 ) in the catalyst. In addition, the role of Ir 3+ in enhancing OER activity was explored. A strong correlation was observed between higher Ir 3+ content and improved OER performance in acidic conditions.

Adams fusion↗
DOE OSTI2024

Synthesis of Zeolites LiX and LiAgX

In this work, we produced approximately 50 grams of zeolite LiX and 50 grams of zeolite LiAgX from commercially available zeolite X. The production of the two specialized zeolite phases was accomplished via a series of ion exchange steps followed by washing, drying, and calcining to produce the final materials. The ion exchange was confirmed by several methods including inductively-coupled plasma emission spectroscopy of exchange solution aliquots, gravimetric analysis, energy dispersive x-ray spectroscopy, and X-ray diffraction. We synthesized approximately 115 grams of zeolite LiX in a large-scale production step after completing a proof-of-concept experiment demonstrating the methodology. The production of zeolite LiX from zeolite X yielded an ion exchange (Li + →Na + ) of approximately 82%. The production of zeolite LiAgX from the previously synthesized zeolite LiX was targeted to exchange approximately 20% of the Li + ions with Ag + ions. We first performed a proof-of-concept experiment demonstrating the reaction pathway and selectivity of the Ag + ion, and then performed a large-scale synthesis of zeolite LiAgX using approximately 50 grams of the zeolite LiX. Our final exchange percentage of silver into the zeolite LiX matrix was approximately 20.8%.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nonlinear propagation of chirped laser pulses through a dispersive and turbulent atmosphere

The evolution of ultrashort laser pulses in dispersive, turbulent, nonlinear, and dissipative media is discussed in connection with nonlinear self-focusing collapse and the onset of laser filamentation. In quiescent air, a laser pulse propagating with a peak power greater than a critical power for self-focusing will undergo a catastrophic, transverse collapse until the intensity is large enough for photoionization. At this point, self-focusing is arrested and balanced by plasma refraction, forming a laser filament. By applying an appropriate chirp, the dispersive properties of the medium can be used to enhance this process and control its onset, and to counter dissipative effects such as molecular absorption and atmospheric scattering. This paper presents an analysis of the effect of atmospheric turbulence on the propagation of nonlinear pulses with dispersion compensation (chirp). Furthermore, the analytical results are compared with wave optics simulations and found to be in reasonable agreement as long as the pulse maintains a near-Gaussian spatiotemporal profile.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Finite ion temperature effects on electrostatic instabilities in partially magnetized plasmas

In this paper, the effects of warm ions on electrostatic, kinetic instabilities observed in partially magnetized plasmas, such as the electron cyclotron drift instability (ECDI) and modified two-stream instability (MTSI), are investigated. The kinetic dispersion relation that accounts for warm, non-magnetized ions and warm, magnetized electrons is solved using a complex root-finding technique [A. C. Denig and K. Hara, Phys. Plasmas 30, 032108 (2023)]. It is observed that finite ion temperature introduces ion Landau damping effects, decreasing the growth rate of most unstable modes. The high-frequency, short-wavelength ECDI modes are more strongly affected by ion Landau damping than the low-frequency, long-wavelength MTSI modes. The solutions of the kinetic dispersion relation for MTSI are compared with the fluid dispersion relation of MTSI, which was originally proposed by McBride et al. [Phys. Fluids 15 2367–2383 (1972)]. The differences in the dispersion characteristics between the kinetic and fluid MTSI limits are assessed, illustrating the effects of electron and ion Landau damping on kinetic instabilities in partially magnetized plasmas.

Denig, A. C. (ORCID:0000000253339572)↗
DOE OSTI2025

Nanohybrid of Silver‐MXene: A Promising Sorbent for Iodine Gas Capture from Nuclear Waste

The increasing reliance on nuclear energy as a significant low-carbon power source necessitates effective solutions for managing radioactive emissions. This study introduces a novel application of MXene nanohybrids, specifically silver-MXene (Ag-Ti 3 C 2 T x ), as an effective sorbent for radioiodine off-gas capture at an operating temperature of 150 °C. Through comprehensive material characterization, including X-ray diffraction, scanning and transmission electron microscopies, energy-dispersive X-ray spectroscopy, Raman spectroscopy, thermogravimetric analysis, inductively coupled plasma optical emission spectroscopy, and gas sorption analyses, the successful loading of Ag nanoparticles onto Ti 3 C 2 T x is confirmed and the subsequent formation of AgI upon iodine capture. The results demonstrate that Ag-Ti 3 C 2 T x exhibits superior iodine uptake compared to traditional silver-based sorbents such as silver mordenite zeolite (AgZ) and silver-functionalized silica aerogel (AgAero). The Ag-Ti 3 C 2 T x achieves an iodine loading of 946 mg g −1 , significantly outperforming AgZ (131 mg g −1 ). These findings highlight the potential of Ag-Ti 3 C 2 T x as a highly efficient, thermally stable sorbent for radioiodine capture, and potentially addressing key limitations of existing materials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Chromatographic and Spectroscopic Study of the Interaction between Polysulfides and Copper Sulfides

To mitigate the “polysulfide shuttle” in lithium–sulfur batteries, different hosting materials that can interact with the polysulfide species physically or chemically have been widely investigated. Copper sulfides as one type of material are believed to have strong chemical interactions with the polysulfide species to consequently influence the performances of Li–S batteries. In this work, high-performance liquid chromatography (HPLC), electrospray ionization mass spectrometry (ESI/MS), scanning electron microscopy with energy-dispersive X-ray spectrometry (SEM-EDS), and inductively coupled plasma optical emission spectroscopy (ICP-OES) were used to systematically investigate the interactions between ether-based polysulfide solutions and copper sulfides (as well as silver sulfide). Furthermore, based on chromatographic and spectroscopic results, the interactions between polysulfides and Cu 2 S can be classified into two types of reactions: one is the redox reaction with the formation of CuS, while another is the complexation reaction with the formation of soluble LiCuS n (n ≥ 4). Contrarily, Ag 2 S (and CuS) shows no interactions with polysulfides. Accordingly, the cycling behaviors of Li–S batteries with copper sulfides as hosting materials or with copper as additives were explained reasonably.

25 ENERGY STORAGE↗
DOE OSTI2025

Estimation Methodology to Evaluate Hypothetical Downwind Impacts from Fusion Plants

The continuing move toward establishing fusion systems for power generation and the associated research to that end is prompting examination of the potential health and safety impacts of such plants to the environment and human health. As many fusion facilities will have tritium inventories on site as part of the fusion fuel, evaluating the potential for downwind impacts from fusion facilities or power plants resulting from accident or routine emissions is a general requirement for assessing location and impacts to workers and the public. As part of siting considerations and permitting, the fusion facilities would be evaluated for potential for downwind concentration and dose impacts. For accident assessment scenarios, the downwind impacts are usually modeled as an instantaneous (or near-instantaneous) release of material transported following the wind. A range of meteorological conditions are usually assessed to determine a bounding case which results in a dose exceeding a specified threshold (e.g., 95 th or 99 th percentile; DOE 2015). This report provides initial estimates of the downwind dose impacts from a potential tritium release at a fusion power plant-relevant facility and identifies potential distances required to limit impacts to nearby population. This effort is meant to provide a bounding analysis and theoretical understanding of impacts of tritium releases for facilities subject to various environmental and atmospheric conditions. Using a Gaussian dispersion model to simulate a brief plume, downwind concentration and dose is projected for tritium oxide. Releases are assumed to consist entirely of tritium oxide due to the increased dose impacts from the oxide form relative to the elemental form of tritium. We also briefly identify how climatological conditions could potentially be used to support risk profile determination.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Comparing XRISM Cluster Velocity Dispersions with Predictions from Cosmological Simulations: Are Feedback Models Too Ejective?

The dynamics of the intracluster medium (ICM), the hot plasma that fills galaxy clusters, are shaped by gravity-driven cluster mergers and feedback from supermassive black holes (SMBHs) in the cluster cores. XRISM measurements of ICM velocities in several clusters offer insights into these processes. We compare XRISM measurements for nine galaxy clusters (Virgo, Perseus, Centaurus, Hydra-A, PKS 0745–19, A2029, Coma, A2319, and Ophiuchus) with predictions from three state-of-the-art cosmological simulation suites, TNG-Cluster, the Three Hundred Project GADGET-X, and GIZMO-SIMBA, that employ different models of feedback. In cool cores, XRISM reveals systematically lower velocity dispersions than the simulations predict, with all 10 measurements below the median simulated values by a factor of 1.5–1.7 on average and all falling within the bottom 10% of the predicted distributions. The observed kinetic-to-total pressure ratio is also lower, with a median value of 2.2%, compared to the predicted 5.0%–6.5% for the three simulations. Outside the cool cores and in non-cool-core (NCC) clusters, simulations show better agreement with XRISM measurements, except for the outskirts of the relaxed, cool-core cluster A2029, which exhibits an exceptionally low kinetic pressure support (<1%), with none of the simulated systems in either of the three suites reaching such low levels. The NCC Coma and A2319 exhibit dispersions at the lower end but within the simulated spread. Our comparison suggests that the three numerical models may overestimate the kinetic effects of SMBH feedback in cluster cores. Additional XRISM observations of NCC clusters will clarify if there is a systematic tension in the gravity-dominated regime as well.

galaxy clusters↗
DOE OSTI2025

Comparative Mechanical Properties Analysis of Triple Ion-Beam Irradiated and Neutron Irradiated Potential Plasma Facing Components

Abstract Several classes of materials are being proposed for use in fusion reactors including oxide dispersion strengthened (ODS) and reduced activation ferritic-martensitic (RAF/M) steels to withstand the severe and harsh conditions. In this work, the mechanical properties of a Fe-16Cr-4Al-2W-0.3Ti-0.3Y 2 O 3 (K3) (ODS) ferritic steel and a Fe-8.9Cr-1.1W-0.47Mn-0.2V-0.14Ta-0.11C (Eurofer 97) (RAF/M) steel) after triple ion beam irradiation were locally evaluated utilizing in-situ micro-pillar compression tests, and continuous stiffness/quasi-static nanoindentation. No change in mechanical properties was observed in the K3 ODS steel. However, the Eurofer 97 RAF/M steel exhibited radiation-induced effects via increases in yield strength. Micro-pillar techniques were expanded to neutron-irradiated materials via an in-situ testing technique employing lift-out methods on Fe-14Cr-0.9Ti-0.3Mo-0.25Y 2 O 3 (MA957) ODS ferritic steel. Both the non-irradiated and irradiated compressive yield stresses of the MA 957 micro-pillars were in good agreement with bulk yield stress values reported in the literature, suggesting that the lift-out micro-pillar compression testing technique is a promising method. The demonstration of these techniques on ion beam and neutron irradiated ODS steels and ion beam RAF/M steels gives information to inform models of the material degradation during use in a fusion device.

alloys↗
DOE OSTI2024

Quasilinear theory: the lost ponderomotive effects and why they matter

Quasilinear theory (QLT) has been used for modeling wave–plasma interactions for decades but remains largely heuristic. Plasma inhomogeneity, ponderomotive effects, microscopic fluctuations, and collisions are not easily accommodated from first principles in QLT, and typically are ignored entirely, due to the limitations of the standard Fourier–Laplace global-mode approach. This results in inconsistencies, for example, violation of the action conservation for nonresonant waves. However, these issues can be avoided, and the theory can be substantially generalized and corrected, if QLT is formulated using more suitable analytical tools, particularly, the Weyl symbol calculus. Here, an attempt is made to deliver an accessible review of this modern formulation, provide intuitive calculations for special cases, and elaborate on the connection with the ‘oscillation-center QLT’ originally proposed by Dewar (Phys Fluids 16:1102, 1973). A Fokker–Planck equation for a ‘dressed’ distribution is derived from the Klimontovich equation and captures quasilinear diffusion, ponderomotive forces, and interactions with background fields for a generic Hamiltonian, so many known formulations of QLT for specific plasma models become corollaries of a single unifying theory. Also, waves are allowed to be off-shell (not constrained by a dispersion relation), which allows them to accommodate microscopic fluctuations. This leads to a collision integral of the Balescu–Lenard type that has all the usual properties but is not restricted to any specific plasma model. For on-shell waves, a generalized version of the classic oscillation-center QLT is obtained. Finally, combined with the wave-kinetic equation, this formulation not only conserves particles, momentum, and energy, like the classic QLT but also reinstates the action conservation for nonresonant waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Net lithium deposition and dominant self-sputtering in lithium tokamak experiment-β with a liquid lithium wall

We observed enhanced net lithium deposition and lithium erosion, possibly dominated by physical sputtering of lithium by lithium-ion bombardment, on the outer plasma-facing surface in the Lithium Tokamak eXperiment-β (LTX-β) during liquid lithium wall operations. Silicon crystal samples with micro-trenches (30 μm × 30 μm × 2–7 μm deep) were exposed to hydrogen plasmas in LTX-β for solid and liquid lithium wall operations. Post-mortem analysis using X-ray photoelectron spectroscopy combined with argon ion sputtering measured net lithium deposition of 8.2 or 21 nm on the silicon crystal surface exposed for ~ 50 repeated shots of ~ 50-ms hydrogen plasma discharges during the liquid lithium wall operations at a vessel temperature of 475 K. Energy dispersive X-ray spectroscopy measured oxygen concentration patterns on the micro-trench floors, which were due to oxidized lithium deposition. Using the inhomogeneous oxygen concentration pattern caused by an ion-shadowing effect associated with the micro-trench’s geometric structure, we determined a polar incident ion direction of 68.4 ± 1.6° referenced to the surface normal direction. This observation was well-explained by the hypothesis that self-sputtering of Li was a dominant lithium erosion source in addition to lithium sputtering by hydrogen bombardment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Focused Ion Beam Tomography of Alloy 617 Corroded in Molten Chloride Salt

Materials qualification of reactor structural materials is a critical step in rapid implementation of advanced nuclear reactor technologies, particularly to assess the corrosion performance in these designs. Accelerated qualification of reactor structural materials requires incorporating powerful computational toolsets, such as phase field modelling in the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework, to predict the evolution of structural materials due to corrosion. Accordingly, computational toolsets will require experimental data generated at appropriate length scales to validate accuracy. Focused ion beam (FIB) provides a high degree of control over manipulation of materials for analytical purposes, including capturing data on the evolution in the microstructure and elemental composition of materials at the mesoscale, an appropriate length scale for phase field modelling of intergranular diffusion phenomena using the MOOSE framework. For instance, the FEI Helios G4 UX dual beam plasma FIB microscope at the Irradiated Materials Characterization Laboratory (IMCL) is capable of backscatter diffraction (EBSD) and energy-dispersive x-ray spectroscopy (EDS) documenting the evolution in the microstructure and elemental composition, respectively. The Helios can perform EDS and EBSD three-dimensionally (3D) using tomography, which is then combined using different software packages to visualize 3D volumes correlating elemental composition to microstructural data. The purpose of this investigation was to develop a streamlined characterization and data processing workflow for 3D tomography studies on the FEI Helios G4 plasma FIB. The investigation is segmented into three parts: 1) Optimizing the data collection workflow, 2) identifying appropriate data processing and visualization software (i.e. DREAM.3D, MIPAR, and VGStudioMax), and 3) establishing an infrastructure for public release. The optimization of the data collection workflow is in collaboration with members of the U220 department to setup formal training on the tomography operation of the G4, through ThermoFisher Scientific, and exploring DREAM.3D, MIPAR, and VGStudioMax data processing/visualization software packages. VGStudioMax currently demonstrates the most promise for future use. Optimization of the data collection and processing workflow is still ongoing. A collaboration with INL High Performance Computing (HPC) established an open-source license for expediting the public release of FIB tomography datasets through HPC. FIB tomography data generated by the G4 will provide comprehensive data for validating 3D phase field mesoscale modelling tools within the MOOSE framework for accelerated qualification of reactor structural materials.

Copeland-Johnson, Trishelle↗
DOE OSTI2025

Kelvin–Helmholtz instability under stabilizing parallel magnetic field in nonhomogeneous compressible MHD flows

We study the Kelvin–Helmholtz instability (KHI) for the general case of a compressible, nonhomogeneous, magnetized plasma flow. The study is limited to a vortex sheet interface with an imposed parallel magnetic field. We introduce a new formalism based on a convective Mach number M c , a convective Alfvénic Mach number M Ac , and a total convective Mach number that combines the two. We derive an analytic expression of the KHI growth rate for a homogeneous flow (i.e., zero Atwood number, A=0) that converges toward both the expression for unmagnetized compressible flow and Chandrasekhar's expression for magnetized incompressible flow. Otherwise, the dispersion relation is solved numerically and allows deriving general stability diagrams of magnetized KHI for the triplet (A, M c , β −plasma) parameters. We show these parameters uniquely define all configurations for a parallel magnetic field. We also construct diagrams with respect to the convective Alfvénic Mach number, the β − plasma parameter, or the magnetic field showing which magnetic field strength is required for stabilizing a given shear flow. The theoretical growth rates are compared with 18 simulations made with the GAMERA code, currently used for 3D magnetospheric simulations. Finally, we apply our results to the analysis of a past KHI experiment performed at the OMEGA laser facility, showing linear theory succeeds to provide accurate estimates of the growth rate at early times. We further discuss how our results can inform future experiments in the high-Mach magnetized regime at the National Ignition Facility. Possible limitations of the study due to resistive, mixing, or turbulence effects are discussed.

compressible flows↗
DOE OSTI2024

Pistia stratiotes L. Biochar for Sorptive Removal of Aqueous Inorganic Nitrogen

Biochar has proven effective in the remediation of excess nitrogen from soil and water. Excess nitrogen from agricultural fields ends up in aquatic systems and leads to reduced water quality and the proliferation of invasive species. This study aimed to assess the efficiency of chemically surface-modified biochar produced from invasive Pistia stratiotes L. for the adsorption of inorganic nitrogen (NH4+ and NO3−). Biochar structure was investigated using scanning electron microscopy, energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and inductively coupled plasma mass spectrometry. The results from adsorption experiments indicate that NH4+ removal was optimal (0.8–1.3 mg N g−1) at near-neutral pH levels (6.0–7.5), while NO3− removal was optimal (0.4–0.8 mg N g−1) under acidic pH conditions (4.8–6.5) using the modified biochar. These findings highlight the significance of solution pH, biochar morphology, and surface chemistry in influencing the adsorption of NH4+ and NO3−. However, further studies are necessary to assess the potential oxidative transformation of NH4+ to NO3− by biochar, which might have contributed to the reduction in NH4+ in the aqueous phase.

36 MATERIALS SCIENCE↗